We applied electrical spectroscopic impedance measurements (ESI) to the first leaf of intact plants of corn and pumpkin. The electric capacity (C) and resistance (Rp) were determined at the characteristic frequency (F...We applied electrical spectroscopic impedance measurements (ESI) to the first leaf of intact plants of corn and pumpkin. The electric capacity (C) and resistance (Rp) were determined at the characteristic frequency (FC). We observed that the electrical parameters of the ESI change in relation to the nutrition and the addition to the root medium of KCN, N,N'-dicyclohexylcar-bodiimide (DCCD), CH3COOH, H2SO4, polyethylene glycol 200 (PEG 200) and NaCl. The amplitude of the curves of bioimpedance spectrometry decreased when plant roots were stressed comparatively to their controls. An increase of the electrical capacity with a reduction of the electrical resistance characterizes a stress. The increase of stress intensity provokes decreases of Rp and curve amplitudes and an increase of C. We conclude that electrical parameters studied can be widely used for stress characterization.展开更多
To address the difficulty in testing and calibrating the stress gradient in the depth direction of mechanical components, a new technology of nondestructive testing and characterization of the residual stress gradient...To address the difficulty in testing and calibrating the stress gradient in the depth direction of mechanical components, a new technology of nondestructive testing and characterization of the residual stress gradient field by ultrasonic method is proposed based on acoustoelasticity theory. By carrying out theoretical analysis, the sensitivity coefficients of different types of ultrasonic are obtained by taking the low carbon steel（12%C） as a research object. By fixing the interval distance between sending and receiving transducers, the mathematical expressions of the change of stress and the variation of time are established. To design one sending-one receiving and oblique incidence ultrasonic detection probes, according to Snell law, the critically refracted longitudinal wave（LCR wave） is excited at a certain depth of the fixed distance of the tested components. Then, the relationship between the depth of LCR wave detection and the center frequency of the probe in Q235 steel is obtained through experimental study. To detect the stress gradient in the depth direction, a stress gradient LCR wave detection model is established, through which the stress gradient formula is derived by the relationship between center frequency and detecting depth. A C-shaped stress specimen of Q235 steel is designed to conduct stress loading tests, and the stress is measured with the five group probes at different center frequencies. The accuracy of ultrasonic testing is verified by X-ray stress analyzer. The stress value of each specific depth is calculated using the stress gradient formula. Accordingly, the ultrasonic characterization of residual stress field is realized. Characterization results show that the stress gradient distribution is consistent with the simulation in ANSYS. The new technology can be widely applied in the detection of the residual stress gradient field caused by mechanical processing, such as welding and shot peening.展开更多
Rhizobia are vital for nitrogen input, fertility of soil and legume plant growth. Knowledge on rhizobial diversity from arid and semiarid areas is important for dry land agriculture in the context of climatic change a...Rhizobia are vital for nitrogen input, fertility of soil and legume plant growth. Knowledge on rhizobial diversity from arid and semiarid areas is important for dry land agriculture in the context of climatic change and for economic utilization. This study provides morphological, biochemical, stress tolerance and plant growth promoting characteristics of fifteen rhizobial isolates from the nodules of same number of wild legumes and one isolate from cultivated Arachis hypogea from semi-arid region, Tirupati. The bacterial isolates were confirmed as rhizobia based on colony morphology and biochemical tests. Based on the colour change of YMA-BTB medium, eight isolates were identified as slow growers and six were fast growers. The isolates differed in growth pattern, colony morphology, antibiotic resistance at higher concentrations and uniformity in utilization of carbon and nitrogen sources. The isolates are tolerant to NaCl up to one percent, displayed normal growth at temperatures 28℃ - 30℃, at neutral pH and poor growth at pH 5and 9. The isolates varied in the production of EPS and IAA, positive for phosphate solubilization and siderophore formation. This functional diversity displayed by the isolates can be utilised for the legume crop production by cross inoculation.展开更多
Long non-coding RNAs(lncRNAs) play important roles in response to various biotic and abiotic stresses. So far, systematic identification and characterization of lncRNAs have been reported in a few model plant species ...Long non-coding RNAs(lncRNAs) play important roles in response to various biotic and abiotic stresses. So far, systematic identification and characterization of lncRNAs have been reported in a few model plant species and major crops, but their roles in abiotic stress response have not yet been reported in common wild rice(Oryza rufipogon). Dongxiang wild rice(DXWR) possesses a high degree of drought resistance and has been well recognized as a precious genetic resource for drought resistant rice breeding. We presented the reference catalog of 1 655 novel lncRNA transcripts in DXWR using strand-specific RNA sequencing and bioinformatics approaches. Meanwhile, a total of 1092 lncRNAs were determined as differentially expressed lncRNAs under drought stress. Quantitative real-time PCR results exhibited a high concordance with RNA sequencing data, which confirmed that the expression patterns of lncRNAs based on RNA sequencing were highly reliable. Furthermore, 8 711 transcripts were predicted as target genes of the differentially expressed lncRNAs. Functional annotation analysis based on Gene Ontology and Kyoto Encyclopedia of Genes and Genomes databases showed that the target genes were significantly enriched in cellular and metabolic processes, cell part, binding and plant hormone signal transduction, as well as many other terms related to abiotic stress resistance. These results expanded our understanding of lncRNA biology and provided candidate regulators for genetic improvement of drought resistance in rice cultivars.展开更多
In order to isolate and clone water-stress-responsive genes, total RNA was extracted from water-stressed plantlets regenerated in vitro of Populus hopeiensis using a QIAGEN RNeasy Plant Mini Kit. CDNA, synthesized by ...In order to isolate and clone water-stress-responsive genes, total RNA was extracted from water-stressed plantlets regenerated in vitro of Populus hopeiensis using a QIAGEN RNeasy Plant Mini Kit. CDNA, synthesized by LD-PCR with the SMART cDNA Library Construction Kit, was in vitro packaged into a phage λTriplEx2 vector. The resulting primary library and amplified library have a titer of 1.68×10^6 and 1.69×10^9 pfu·mL^-1 respectively. The combination ratio reached 98.8% and the average size of inserts was about 800 bp. In addition, the percentage of inserted fragments （〉400bp） was approximately 90%. The results indicate that a cDNA library has been successfully constructed.展开更多
A six-parameter mathematical model was introduced to simulate the stress-strain hysteresis and the sinner hysteresis of polycrystalline shape memory alloys (SMAs). By the comparison with experiments of Cu-Zn-Al SMA, i...A six-parameter mathematical model was introduced to simulate the stress-strain hysteresis and the sinner hysteresis of polycrystalline shape memory alloys (SMAs). By the comparison with experiments of Cu-Zn-Al SMA, it was shown that the model could be used to calculate the stress-strain relations with rather good accuracy. Moreover, it was found that the six parameters introduced in this paper represented the characteristics of the stress-strain hysteresis of polycrystalline SMAs and could be used to characterize the hysteresis quantitatively.展开更多
We present a workflow linking coupled fluid-flow and geomechanical simulation with seismic modelling to predict seismic anisotropy induced by non-hydrostatic stress changes. We generate seismic models from coupled sim...We present a workflow linking coupled fluid-flow and geomechanical simulation with seismic modelling to predict seismic anisotropy induced by non-hydrostatic stress changes. We generate seismic models from coupled simulations to examine the relationship between reservoir geometry, stress path and seismic anisotropy. The results indicate that geometry influences the evolution of stress,which leads to stress-induced seismic anisotropy. Although stress anisotropy is high for the small reservoir, the effect of stress arching and the ability of the side-burden to support the excess load limit the overall change in effective stress and hence seismic anisotropy. For the extensive reservoir, stress anisotropy and induced seismic anisotropy are high. The extensive and elongate reservoirs experience significant compaction, where the inefficiency of the developed stress arching in the side-burden cannot support the excess load.The elongate reservoir displays significant stress asymmetry,with seismic anisotropy developing predominantly along the long-edge of the reservoir. We show that the link betweenstress path parameters and seismic anisotropy is complex,where the anisotropic symmetry is controlled not only by model geometry but also the nonlinear rock physics model used. Nevertheless, a workflow has been developed to model seismic anisotropy induced by non-hydrostatic stress changes, allowing field observations of anisotropy to be linked with geomechanical models.展开更多
Salinity is one of the most important abiotic stresses that adversely affects crop growth and productivity. A subtractive suppression hybridization （SSH） library were constructed from the roots of salt-sensitive Yul...Salinity is one of the most important abiotic stresses that adversely affects crop growth and productivity. A subtractive suppression hybridization （SSH） library were constructed from the roots of salt-sensitive Yulu cultivar melon seedlings under salt stress; 557 high-quality expressed sequence tags （ESTs） were randomly sequenced, with an average size of 428 bp, which assembled into 68 contigs and 315 singletons. Compared with our previous SSH library generated from the salt-tolerant Bingxuecui cultivar, the proportion of transcripts involved in metabolism, protein fate, cellular communication/signal transduction mechanisms, and cell rescue/defense were 4, 1.46, 0.94, and 0.4% higher, respectively, in the salt-tolerant cultivar than the in salt-sensitive cultivar. Quantitative real-time PCR analysis of eleven transcripts revealed temporal variations in their expression in the two cultivars under salt stress. One NAC gene （JZ477011） was heterologously expressed in yeast for functional characterization, and enhanced the sensitivity of yeast cells to high-salinity to salt stress and inhibited their growth. Information regards to their functions would aid in the understanding of response mechanisms to saline stress and in the development of molecular markers for selecting salt-tolerant melon cultivars.展开更多
文摘We applied electrical spectroscopic impedance measurements (ESI) to the first leaf of intact plants of corn and pumpkin. The electric capacity (C) and resistance (Rp) were determined at the characteristic frequency (FC). We observed that the electrical parameters of the ESI change in relation to the nutrition and the addition to the root medium of KCN, N,N'-dicyclohexylcar-bodiimide (DCCD), CH3COOH, H2SO4, polyethylene glycol 200 (PEG 200) and NaCl. The amplitude of the curves of bioimpedance spectrometry decreased when plant roots were stressed comparatively to their controls. An increase of the electrical capacity with a reduction of the electrical resistance characterizes a stress. The increase of stress intensity provokes decreases of Rp and curve amplitudes and an increase of C. We conclude that electrical parameters studied can be widely used for stress characterization.
基金Supported by National Natural Science Foundation of China(Grant No.51275042)
文摘To address the difficulty in testing and calibrating the stress gradient in the depth direction of mechanical components, a new technology of nondestructive testing and characterization of the residual stress gradient field by ultrasonic method is proposed based on acoustoelasticity theory. By carrying out theoretical analysis, the sensitivity coefficients of different types of ultrasonic are obtained by taking the low carbon steel（12%C） as a research object. By fixing the interval distance between sending and receiving transducers, the mathematical expressions of the change of stress and the variation of time are established. To design one sending-one receiving and oblique incidence ultrasonic detection probes, according to Snell law, the critically refracted longitudinal wave（LCR wave） is excited at a certain depth of the fixed distance of the tested components. Then, the relationship between the depth of LCR wave detection and the center frequency of the probe in Q235 steel is obtained through experimental study. To detect the stress gradient in the depth direction, a stress gradient LCR wave detection model is established, through which the stress gradient formula is derived by the relationship between center frequency and detecting depth. A C-shaped stress specimen of Q235 steel is designed to conduct stress loading tests, and the stress is measured with the five group probes at different center frequencies. The accuracy of ultrasonic testing is verified by X-ray stress analyzer. The stress value of each specific depth is calculated using the stress gradient formula. Accordingly, the ultrasonic characterization of residual stress field is realized. Characterization results show that the stress gradient distribution is consistent with the simulation in ANSYS. The new technology can be widely applied in the detection of the residual stress gradient field caused by mechanical processing, such as welding and shot peening.
文摘Rhizobia are vital for nitrogen input, fertility of soil and legume plant growth. Knowledge on rhizobial diversity from arid and semiarid areas is important for dry land agriculture in the context of climatic change and for economic utilization. This study provides morphological, biochemical, stress tolerance and plant growth promoting characteristics of fifteen rhizobial isolates from the nodules of same number of wild legumes and one isolate from cultivated Arachis hypogea from semi-arid region, Tirupati. The bacterial isolates were confirmed as rhizobia based on colony morphology and biochemical tests. Based on the colour change of YMA-BTB medium, eight isolates were identified as slow growers and six were fast growers. The isolates differed in growth pattern, colony morphology, antibiotic resistance at higher concentrations and uniformity in utilization of carbon and nitrogen sources. The isolates are tolerant to NaCl up to one percent, displayed normal growth at temperatures 28℃ - 30℃, at neutral pH and poor growth at pH 5and 9. The isolates varied in the production of EPS and IAA, positive for phosphate solubilization and siderophore formation. This functional diversity displayed by the isolates can be utilised for the legume crop production by cross inoculation.
基金supported by the National Natural Science Foundation of China (Grant No. 31660386)the Natural Science Foundation of Jiangxi Province for Distinguished Young Scholars (Grant No. 20171BCB23040)+1 种基金the Foundation of Jiangxi Educational Committee (Grant No. GJJ170193)the Sponsored Program for Distinguished Young Scholars in Jiangxi Normal University, China
文摘Long non-coding RNAs(lncRNAs) play important roles in response to various biotic and abiotic stresses. So far, systematic identification and characterization of lncRNAs have been reported in a few model plant species and major crops, but their roles in abiotic stress response have not yet been reported in common wild rice(Oryza rufipogon). Dongxiang wild rice(DXWR) possesses a high degree of drought resistance and has been well recognized as a precious genetic resource for drought resistant rice breeding. We presented the reference catalog of 1 655 novel lncRNA transcripts in DXWR using strand-specific RNA sequencing and bioinformatics approaches. Meanwhile, a total of 1092 lncRNAs were determined as differentially expressed lncRNAs under drought stress. Quantitative real-time PCR results exhibited a high concordance with RNA sequencing data, which confirmed that the expression patterns of lncRNAs based on RNA sequencing were highly reliable. Furthermore, 8 711 transcripts were predicted as target genes of the differentially expressed lncRNAs. Functional annotation analysis based on Gene Ontology and Kyoto Encyclopedia of Genes and Genomes databases showed that the target genes were significantly enriched in cellular and metabolic processes, cell part, binding and plant hormone signal transduction, as well as many other terms related to abiotic stress resistance. These results expanded our understanding of lncRNA biology and provided candidate regulators for genetic improvement of drought resistance in rice cultivars.
文摘In order to isolate and clone water-stress-responsive genes, total RNA was extracted from water-stressed plantlets regenerated in vitro of Populus hopeiensis using a QIAGEN RNeasy Plant Mini Kit. CDNA, synthesized by LD-PCR with the SMART cDNA Library Construction Kit, was in vitro packaged into a phage λTriplEx2 vector. The resulting primary library and amplified library have a titer of 1.68×10^6 and 1.69×10^9 pfu·mL^-1 respectively. The combination ratio reached 98.8% and the average size of inserts was about 800 bp. In addition, the percentage of inserted fragments （〉400bp） was approximately 90%. The results indicate that a cDNA library has been successfully constructed.
文摘A six-parameter mathematical model was introduced to simulate the stress-strain hysteresis and the sinner hysteresis of polycrystalline shape memory alloys (SMAs). By the comparison with experiments of Cu-Zn-Al SMA, it was shown that the model could be used to calculate the stress-strain relations with rather good accuracy. Moreover, it was found that the six parameters introduced in this paper represented the characteristics of the stress-strain hysteresis of polycrystalline SMAs and could be used to characterize the hysteresis quantitatively.
基金the sponsors of the IPEGG project, BG, BP, Statoilthe Research Council UK (EP/K035878/1+1 种基金 EP/K021869/1 NE/L000423/1) for financial support
文摘We present a workflow linking coupled fluid-flow and geomechanical simulation with seismic modelling to predict seismic anisotropy induced by non-hydrostatic stress changes. We generate seismic models from coupled simulations to examine the relationship between reservoir geometry, stress path and seismic anisotropy. The results indicate that geometry influences the evolution of stress,which leads to stress-induced seismic anisotropy. Although stress anisotropy is high for the small reservoir, the effect of stress arching and the ability of the side-burden to support the excess load limit the overall change in effective stress and hence seismic anisotropy. For the extensive reservoir, stress anisotropy and induced seismic anisotropy are high. The extensive and elongate reservoirs experience significant compaction, where the inefficiency of the developed stress arching in the side-burden cannot support the excess load.The elongate reservoir displays significant stress asymmetry,with seismic anisotropy developing predominantly along the long-edge of the reservoir. We show that the link betweenstress path parameters and seismic anisotropy is complex,where the anisotropic symmetry is controlled not only by model geometry but also the nonlinear rock physics model used. Nevertheless, a workflow has been developed to model seismic anisotropy induced by non-hydrostatic stress changes, allowing field observations of anisotropy to be linked with geomechanical models.
基金supported by grants from the National Natural Science Foundation of China(31372079)the National High Technology Research and Development Program of China(863 Program,2012AA101903)+1 种基金the Natural Science Foundation of Shanghai Science and Technology Committee,China(13ZR1422400)Shanghi Graduate Education and Innovation Program(Horticulture),China
文摘Salinity is one of the most important abiotic stresses that adversely affects crop growth and productivity. A subtractive suppression hybridization （SSH） library were constructed from the roots of salt-sensitive Yulu cultivar melon seedlings under salt stress; 557 high-quality expressed sequence tags （ESTs） were randomly sequenced, with an average size of 428 bp, which assembled into 68 contigs and 315 singletons. Compared with our previous SSH library generated from the salt-tolerant Bingxuecui cultivar, the proportion of transcripts involved in metabolism, protein fate, cellular communication/signal transduction mechanisms, and cell rescue/defense were 4, 1.46, 0.94, and 0.4% higher, respectively, in the salt-tolerant cultivar than the in salt-sensitive cultivar. Quantitative real-time PCR analysis of eleven transcripts revealed temporal variations in their expression in the two cultivars under salt stress. One NAC gene （JZ477011） was heterologously expressed in yeast for functional characterization, and enhanced the sensitivity of yeast cells to high-salinity to salt stress and inhibited their growth. Information regards to their functions would aid in the understanding of response mechanisms to saline stress and in the development of molecular markers for selecting salt-tolerant melon cultivars.
