Stress-drop effect on brittleness evaluation of rock materials

Uniaxial or triaxial compression test of cylindrical rock specimens using rock mechanics testing machine is a basic experimental method to study the strength and deformation characteristics of rock and the development process of rock fracture. Extensive literature review has been conducted on this issue;meanwhile, experimental and numerical studies have been conducted on the stress-drop effect on the brittleness of rock materials. A plastic flow factor of λ is proposed to describe the stress-drop effect. Evaluation methods of the factor λ corresponding to the four yield criteria of rock mass are proposed. Those four yield criteria are Tresca criterion, von-Mises criterion, Mohr-Coulomb criterion and Drucker-Prager criterion. For simplicity purposes, an engineering approximation approach has been proposed to evaluate the stress-drop with a non-zero strain increment. Numerical simulation results validated the effectiveness of the plastic flow factors λ as well as the engineering approximation approach. Based on the results in this study, finite element code can be programmed for brittle materials with stress-drop, which has the potential to be readily incorporated in finite element codes.

Comparative Study of Changes in Stress-drop of the Jinggu MS6.6 and Ludian MS6.5 Earthquake Sequences

The earthquake stress-drop values of two sequences were accurately calculated after taking away the effects due to regional earthquake anelastic attenuation and station site response,using waveform data and seismic phase data of sequences of the Jinggu M_S6. 6,and Ludian M_S6. 5 earthquakes in Yunnan. These results show that the stress drop with magnitude increases within the scope of this study of magnitude. After eliminating the influence of the magnitude,the average value of stress-drop in the Jinggu sequence is higher than that of the Ludian sequence at the same magnitude range. This may be related to the stress state in different regions. In terms of the changes of time and space of stress-drop,before M_S5. 8 strong aftershock,the stress-drop is "slowing down-turning up-keeping a high value"after the mainshock,meanwhile,almost all of the abnormally high stress drop value is distributed around the M_S5. 8 strong aftershock, showing that the stress environment in the region was increasing after the mainshock. And after the M_S5. 9 strong aftershock,stress-drop rapidly declines to a relatively stable state,meanwhile,the high value of stress-drop is distributed around the strong aftershock,showing that the regional tectonic stress gets more fully release,its stress environment begins to rapidly decrease.For the Ludian sequence without a strong aftershock occurring,the average value of stress drop is lower than that of the Jinggu earthquake sequence at the same magnitude range,while at the same time,the stress-drop of the aftershock sequence almost hasn't changed much. In the time after the mainshock,combined with the release characteristics of the main energy,the stress in the region is excessively released,the subsequent stress in the region gradually returns to normal. This may be the reason why the activity of Ludianaftershocks significantly was weaker and subsequently there were no strong aftershocks occurred.

Expansion of spherical cavity of strain-softening materials with different elastic moduli of tension and compression

An expansion theory of spherical cavities in strain-softening materials with different moduli of tension and com-pression was presented. For geomaterials,two controlling parameters were introduced to take into account the different moduli and strain-softening properties. By means of elastic theory with different moduli and stress-softening models,general solutions cal-culating Tresca and Mohr-Coulomb materials' stress and displacement fields of expansion of spherical cavity were derived. The effects caused by different elastic moduli in tensile and compression and strain-softening rates on stress and displacement fields and development of plastic zone of expansion of cavity were analyzed. The results show that the ultimate expansion pressure,stress and displacement fields and development of plastic zone vary with the different elastic moduli and strain-softening prop-erties. If classical elastic theory is adopted and strain-softening properties are neglected,rather large errors may be the result.