A Detailed Observation on Successive Stress-Induced Martensite Transformation in CuAlMnZnZr Alloy Poly crystalline Above A_(f)

The successive stress-induced martensite morphologies and mechanisms in polycrystalline CuAlMnZnZr samples have been examined. By applying stress to the uniform P ] matrix, two or more orientation plates of M18R martensite are stress-induced in a grain. With further increasing stress, one orientation plate depletes the other and coalesces into a single region in some view field. The mechanisms by which these are developed have been ascertained, and include variant-variant coalescence, stress-induced martensite to martensite transformation and the complicated cross-like stress-induced martensite formation.

Pre-existing orthorhombic embryos-induced hexagonal-orthorhombic martensitic transformation in MnNiSi_(1-x)(CoNiGe)_x alloy

The thermal-elastic martensitic transformation from high-temperature Ni_(2)In-type hexagonal structure to low-temperature TiNiSi-type orthorhombic structure has been widely studied in MnMX(M=Ni or Co,and X=Ge or Si)alloys.However,the answer to how the orthorhombic martensite nucleates and grows within the hexagonal parent is still unclear.In this work,the hexagonal-orthorhombic martensitic transformation in a Co and Ge co-substituted MnNiSi is investigated.One can find some orthorhombic laths embedded in the hexagonal parent at a temperature above the martensitic transformation start temperature(M_(s)).With the the sample cooing to M_(s),the laths turn broader,indicating that the martensitic transformation starts from these pre-existing orthorhombic laths.Microstructure observation suggests that these pre-existing orthorhombic laths do not originate from the hexagonal-orthorhombic martensitic transformation because of the difference between atomic occupations of doping elements in the hexagonal parent and those in the preexisting orthorhombic laths.The phenomenological crystallographic theory and experimental investigations prove that the pre-existing orthorhombic lath and generated orthorhombic martensite have the same crystallography relationship to the hexagonal parent.Therefore,the orthorhombic martensite can take these pre-existing laths as embryos and grow up.This work implies that the martensitic transformation in MnNiSi_(1-x)(CoNiGe)_(x) alloy is initiated by orthorhombic embryos.

Description of martensitic transformation kinetics in Fe-C-X(X = Ni,Cr,Mn,Si) system by a modified model

Controlling the content of athermal martensite and retained austenite is important to improving the mechanical properties of high-strength steels,but a mechanism for the accurate description of martensitic transformation during the cooling process must be addressed.At present,frequently used semi-empirical kinetics models suffer from huge errors at the beginning of transformation,and most of them fail to exhibit the sigmoidal shape characteristic of transformation curves.To describe the martensitic transformation process accurately,based on the Magee model,we introduced the changes in the nucleation activation energy of martensite with temperature,which led to the varying nucleation rates of this model during martensitic transformation.According to the calculation results,the relative error of the modified model for the martensitic transformation kinetics curves of Fe-C-X(X = Ni,Cr,Mn,Si) alloys reached 9.5% compared with those measured via the thermal expansion method.The relative error was approximately reduced by two-thirds compared with that of the Magee model.The incorporation of nucleation activation energy into the kinetics model contributes to the improvement of its precision.

Stress-induced martensite phase transformation of FeMnSiCrNi shape memory alloy subjected to mechanical vibrating polishing

Fe66Mn15Si5Cr9Ni5(wt.%)shape memory alloy(SMA)withγaustenite andεmartensite was subjected to mechanical vibrating polishing and consequently its surface suffered from plastic deformation in the case of compressive stress.Almost completeεmartensite transformation is found to occur in FeMnSiCrNi sample subjected to mechanical vibrating polishing,where stress-induced martensite transformation plays a predominant role.Stressinduced martensite transformation of FeMnSiCrNi SMA is closely related to the orientation of external stress.The complicated compressive stress which results from the mechanical vibrating polishing contributes toεmartensite transformation fromγaustenite of FeMnSiCrNi SMA.Mechanical vibrating polishing has a certain influence on the surface texture ofεmartensite of FeMnSiCrNi SMA,where■<0001>texture appears in the polished FeMnSiCrNi SMA.

Reverse Transformation Behavior of Martensite Formed during Cooling Proce under Constant Stress in TiNi Alloys

The reverse transformation temperature and recovery strain ratio of the martensite formed during the cooling process under a constant stress in TiNi shape memory alloy wires are studied in this paper. Results show that a higher level of the applied constant stress during the cooling process will induce martensite with a higher reverse martensitic transformation start temperature As and a smaller recovery strain ratio. Similarly, a prestrain at the room temperature elevates the As temperature and decreases the recovery strain ratio. However, the As temperature and the recovery strain ratio of the martensite formed during the cooling process under a constant stress are lower than those of the martensite formed by prestrain at the room temperature.

Stress-induced martensitic transformation in (Ni_(47)Ti_(44))(100-x)Nb_x shape memory alloys with wide hysteresis

The effect of deformation via stress-induced martensitic transformation on the reverse transformation behavior of the (Ni47Ti44)100?xNbx (x=3, 9, 15, 20, 30, mole fraction, %) shape memory alloys was investigated in detail by differential scanning calorimetry (DSC) after performing cryogenic tensile tests at a temperature of Ms+30 ℃. The results show that Nb-content has obvious effect on the process of stress-induced martensitic transformation. It is also observed that the stress-induced martensite is stabilized relative to the thermally-induced martensite (TIM) formed on cooling, and Nb-content in Ni-Ti-Nb alloy has great influence on the reverse transformation start temperature and transformation temperature hysteresis of stress-induced martensite(SIM). The mechanism of wide transformation temperature hysteresis was fully explained based on the microscopic structure and the distribution of the elastic strain energy of (Ni47Ti44)100?xNbx alloys.

First-principles calculations of Ni–(Co)–Mn–Cu–Ti all-d-metal Heusler alloy on martensitic transformation,mechanical and magnetic properties

The martensitic transformation,mechanical,and magnetic properties of the Ni_(2)Mn_(1.5-x)Cu_(x)Ti_(0.5) (x=0.125,0.25,0.375,0.5) and Ni_(2-y)Co_(y)Mn_(1.5-x)Cu_(x)Ti_(0.5)[(x=0.125,y=0.125,0.25,0.375,0.5) and (x=0.125,0.25,0.375,y=0.625)]alloys were systematically studied by the first-principles calculations.For the formation energy,the martensite is smaller than the austenite,the Ni–(Co)–Mn–Cu–Ti alloys studied in this work can undergo martensitic transformation.The austenite and non-modulated (NM) martensite always present antiferromagnetic state in the Ni_(2)Mn_(1.5-x)Cu_(x)Ti_(0.5) and Ni_(2-y)Co_(y)Mn_(1.5-x)Cu_(x)Ti_(0.5) (y<0.625) alloys.When y=0.625 in the Ni_(2-y)Co_(y)Mn_(1.5-x)Cu_(x)Ti_(0.5) series,the austenite presents ferromagnetic state while the NM martensite shows antiferromagnetic state.Cu doping can decrease the thermal hysteresis and anisotropy of the Ni–(Co)–Mn–Ti alloy.Increasing Mn and decreasing Ti content can improve the shear resistance and normal stress resistance,but reduce the toughness in the Ni–Mn–Cu–Ti alloy.And the ductility of the Co–Cu co-doping alloy is inferior to that of the Ni–Mn–Cu–Ti and Ni–Co–Mn–Ti alloys.The electronic density of states was studied to reveal the essence of the mechanical and magnetic properties.

CHARACTERISTICS OF STRESS-INDUCED TRANSFORMATION AND MICROSTRUCTURE EVOLUTION IN Cu-BASED SMA

The mechanical behavior of shape memory alloys （SMAs） is closely related to the formation and evolution of its microstructures. Through theoretical analysis and experimental observations, it was found that the stress-induced martensitic transformation process of single crystal Cu-based SMA under uniaxial tension condition consisted of three periods： nucleation, mixed nucleation and growth, and merging due to growth. During the nucleation, the stress dropped rapidly and the number of interfaces increased very fast while the phase fraction increased slowly. In the second period, both the stress and the interface number changed slightly but the phase fraction increased dramatically. Finally, the stress and the phase fraction changed slowly while the number of interfaces decreased quickly. Moreover, it was found that the transformation could be of multi-stage： sharp stress drops at several strains and correspondingly, the nucleation and growth process occurred quasi-independently in several parts of the sample.

Martensite transformation induced by deformation and its phase electrochemical behavior for stainless steels AISI 304 and 316L

The martensite transformation induced by tensile elongation and its effect onthe behavior of phase electrochemistry of AISI 304 and 316L in 3.5% NaCl solution were studied. Theresults show that the content of α′-martensite in stainless steel 304 increases with the truestrain. As α′-martensite content increased, free corrosion potential and pitting potential ofstainless steel 304 in 3.5% NaCl solution appeared the change trend of a minimum. It was also foundthat pitting nucleated preferentially at the phase interfaces between martensite and austenite.There existed apparent difference between electrochemical properties of austenite and of martensitefor stainless steel 304 and 316L in 3.5% NaCl solution.

MARTENSITE TRANSFORMATION OF A TiNiCu ALLOY

ＭＡＲＴＥＮＳＩＴＥＴＲＡＮＳＦＯＲＭＡＴＩＯＮＯＦＡＴｉＮｉＣｕＡＬＬＯＹ￥Ｚｈａｎｇ，Ｙｉ；Ｊｉｎ，Ｊｉａｌｉｎｇ；Ｊｉ，Ｚｈｉｑｉａｎｇ（ＳｈａｎｇｈａｉＩｒｏｎａｎｄＳｔｅｅｌＲｅｓｅａｒｃｈＩｎｓｔｉｔｕｔｅ，Ｓｈａｎｇｈａｉ２００９４０）...

Mechanically-induced martensite transformation of NiTiFe shape memory alloy subjected to plane strain compression

Based on the channel die compression, NiTiFe shape memory alloy(SMA) was subjected to plane strain compression. Mechanically-induced martensite transformation, nanocrystalline and amorphous phase can be observed in the case of large plastic strain. Mechanically-induced martensite transformation is obviously different from the conventional stress-induced martensite transformation. The former generally occurs after dislocation slip, whereas the latter arises prior to dislocation slip. The occurrence of B19’ martensite phase contributes to accommodating subsequent plastic deformation of NiTiFe SMA. Mechanically-induced B19’ martensite is partially stabilized due to the existence of local high stress field and consequently it is unable to be reverted to B2 austenite phase during unloading.

Deformation at Room and Low Temperatures and Martensite Transformation in Resistance Spot Welding Duplexγ&α(δ) Materials of 301L Stainless Steel

Transformation induced plasticity （TRIP） and twinning induced plasticity （TWlP） effects had been widely studied in single austenite steel. But in duplex γ ＆ α（δ） phase, such as welding materials of stainless steel, they had been less studied. Tensile shear loading experiment of resistance spot welding specimens prepared with 2 mm 301L sheets, was carried out at 15℃ and -50℃. Optical microscopy and scanning electron microscopy （SEM） as well as X-ray diffraction （XRD） were used to investigate the microstructure of weld nugget, and specimens fracture surface. The results showed that the initial weld nugget was composed of 8.4% α（δ） ferrite and 91.6% austenite. Tensile shear load bearing capacity of spot welding specimen at -50℃ was 24.8 kN, 17.7% higher than that at 15℃. About 78.5 vol. pct. martensite transformation was induced by plastic deformation at -50℃, while about 67.9 vol. pct transformation induced at 15℃. The plasticity of spot welding joint decreased with the decline of experimental temperature.

REVERSIBLE TRANSFORMATION BETWEEN MATRIX AND MARTENSITE IN Ni-Ti SHAPE MEMORY ALLOYS

The reversible transformation between matrix and martensite in Ni-Ti shape memory alloys has been dynamically observed under TEM.The orientation relation between martensite and austenite as well as the structural change near the transition temperature has been also studied with the help of HREM SADP.The results show that the orientation relation between martensite and austenite is[11]_A//[10]_M,[110]_A//[001]_M,(110)_A//(001)_M and the angle between(110)_A and(010)_M is about 6.5°.The crystal defects of martensite are found to be twin and stacking fault,and the twin plane as(100).

MARTENSITE TRANSFORMATION MICROSTRUCTURE OF 40Cr STEEL COMPLEXLY INDUCED BY LASER SHOCK

40Cr steel is laser quenched by the NEL-2500A rapidly axial flow CO2 laser. Then the martensite induced by laser quenched is shocked by Nd：YAG laser again. Through comparing and analyzing the appearance and size of martensite, the dislocation density in microstmcture between the treated zones by laser quenched and by laser quenched plus laser shock, the following results are shown： The second martensite obtained by laser compound treatment is more fmer compared with those obtained by laser quenched; In the hardened zones obtained by compound treatment, a lot of slender second twin crystal martensites are induced; A lot of more high density dislocation tangles and cellular dislocations are generated. From the transmission electron microscope （TEM） micrograph after compound treatment, there are not only long lath and short nubbly martensites arranged in cross direction, but also massive nubbly and small short nubbly martensites arranged in longitudinal direction. Some martensites look like the broken blocks of quenched martensites. These new martensites are inserted transversely in the quenched martensites with large tangle. And they make quenched martensites break into pieces. Compared with the quenched martensites, the size of fresh martensites are smaller, about 0.3-0.5 μm.

Mechanism on the Effect of Al upon the γ→ε Martensite Transformation in the Fe-Mn Alloys

The structure of the solid solution treated and deformed Fe-25Mn-(0-3.11)Al-0.15C alloys was examined by means of metallograph and X-ray diffraction, which has confirmed that Al restrains the γ→ε transformation in the Fe-Mn alloys. The mechanism on the restraining effect of Al has been discussed on the basis of the efFect of Al upon the stacking fault energy in the Fe-Mn alloys.Aluminium increases thermodynamically the stability of the Fe-Mn austenite and the driving force limit necessitated to be overcome for the γ→ε transformation, because the thermodynamicalcalculation indicates that Al increases the stacking fault energy in the Fe-Mn alloys at 300 K.Al will decrease the number and the size for the ε-martensite nucleus according to the stacking fault mechanism of the ε-martensite nucleation

Studies on Genetic Transformation of Fresh-cut Chrysanthemum Using DREB1A Promoted by Stress-induced Promoter rd29A

In this study, DERB1A transcription factor and stress-induced promoter rd29A were isolated respectively and amplified from Arabidopsis thaliana, se- quenced and analyzed by DNAsis. In addition, the stress-induced promoter rd29A was utilized to construct the plant expression vector of DERB1A, which was transformed into Agrobacterium tumefaciens. Furthermore, the transgenic regeneration system of fresh-cut chrysanthemum from callus to plantlets was established successfully. On this basis, chrysanthemum leaf-disc explants were genetically transformed with Agrobacterium-mediated method. Two positive transgenie plantlets were obtained in vitro. Based on PCR detection, DREB1A transcription factor was integrated into chrysanthemum genome, which laid the foundation for breeding new transgenie cultivars of fresh-cut chrysanthemum with high comprehensive stress resistance, good cmalitv and high field.

Effect of Thermal Cycling under Load on Martensite Transformation and Two-way Shape Memory Effect in a TiNi Alloy

The effect of thermal cycling under loading on martensitic transformation and two-way shape memory effect was investigated for Ti-49.8 at, pet Ni alloy. It is shown that M(s), and M(f) temperature increase with increasing the number of cycles, while A(s) and A(f) temperature decrease during thermal cycling. The total strain at and permanent strain epsilon (p) increase with increasing applied stress and number of cycles. The two-way shape memory effect can be improved by proper thermal cycling training under loading, while excessively high applied stress results in the deterioration of TWSME. The reason for the changes in martensitic transformation characteristics and two-way shape memory effect during thermal cycling under loading is discussed based on the analysis of microstructure by TEM observations.

Analysis of phase transformation from austenite to martensite in NiTi alloy strips under uniaxial tension

Phase transformation from austenite to martensite in NiTi alloy strips under the uniaxial tension has been observed in experiments and numerically simulated as a localized deformation. This work presents an analysis using the theory of phase transformation. The jump of deformation gradient across the interface between two phases and the Maxwell relation are considered. Governing equations for the phase transformation are derived. The analysis is reduced to finding the minimum value of the loading at which the governing equations have a unique, real and physically acceptable solution. The equations are solved numerically and it is verified that the unique solution exists definitely. The Maxwell stress, the stresses and strains inside both austenite and martensite phases, and the transformation-front orientation angle are determined to be in reasonably good agreement with experimental observations.

The Acoustic Emission Effects of Martensite Transformation in Alloys Cr12MoV and Fe-33Ni-4Ti-10Co

1 Introduction The method of acoustic emission (AE)as a new technique to study the processesin metals and alloys in the solid phase hasbeen widely used and developed since thelast 20 years. Martensite transformationis diffusionless. Because of changing fromone crystal structure to another by coopera-tive shear process the interfacial coherency

Effects of Applied Stresses on Martensite Transformation in AISI4340 Steel

This study aims at the experimental analysis of the transformation induced plasticity （TRIP） phenomenon. Experiments are conducted in which martensite is allowed to grow under the influence of a series of externally applied stresses. The magnitude of the applied stresses is less than 67% of the yield strength of austenite σγ （Ts）. Since there is no obvious difference between the transformation plasticity under tension and the compression for the lower applied stresses, only compressive stresses are applied. The results confirm that the transformation plasticity is proportional to the applied stress if the latter does not exceed 67 % of σγ （Ts）. The TRiP-strain, the kinetics, and their dependence on the applied stresses are studied. The comparison between calculated results and experimental results shows that the model accurately describes the phenomenon.