The redox behavior of spironolactone（SP） drug in Britton-Robinson（BR） buffer of pH 2-11 was investigated by differential pulse cathodic stripping voltammetry（DPCSV） and cyclic voltammetry（CV） at hanging mercur...The redox behavior of spironolactone（SP） drug in Britton-Robinson（BR） buffer of pH 2-11 was investigated by differential pulse cathodic stripping voltammetry（DPCSV） and cyclic voltammetry（CV） at hanging mercury dropping electrode（HMDE）.At pH 9-10.5,the DPCSV of SP drug showed two cathodic peaks at1.15 and1.38 V at the HMDE vs.Ag/AgCl reference electrode.In the CV,at pH 9-10,the dependence of the cathodic peak current,Ip,c and peak potential,Ep,c of the second peak（Ep,c2） on the scan rate（n） and on the depolizer（SP） concentrations was typical of an electrode coupled（EC） chemical reaction type mechanism.The plot of Ip,cat 1.380 V of the DPCSV vs.SP concentration at pH 9 was linear over the concentration range of 1.2×1010-9.6×107 M.The lower limit of detection（LLOD） and limit of quantification（LOQ） of the drug were 1.1×1011 and 4.14×1011 M,respectively.The method was successfully applied for the analysis of SP residues in industrial wastewater,in pure form（98.273.1%） and in drug formulations e.g.Aldactones tablet（98.3572.9%）.The method was validated by comparison with HPLC and the official data methods.展开更多
Three different online heat treatment processes were designed to study the effects on the mechanical properties of a 0.19C-1.6Si-1.6Mn（wt%） hot rolled strip steel.The microstructures were characterized by means of S...Three different online heat treatment processes were designed to study the effects on the mechanical properties of a 0.19C-1.6Si-1.6Mn（wt%） hot rolled strip steel.The microstructures were characterized by means of SEM,TEM,EPMA,and XRD.The mechanical properties were estimated by tensile tests.Results showed that a satisfying combination of strength and ductility could be obtained through the ferrite relaxation and direct quenching and partitioning process.Analysis was also focused on this process.The microstructure contained proeutectoid ferrite grains,martensite packets and blocky or interlath retained austenite,and also contained carbide-free bainite in the case of relatively high quench temperatures.The retained austenite fraction was increased through proeutectoid ferrite and partial bainite transformation,while the tensile strength was also consequently decreased.The most of retained austenite transformed to ferrite under deformation and the elongation was obviously improved.展开更多
基金funded by the Deanship of Scientific Research (DSR),King Abdulaziz University under grant number 172/428
文摘The redox behavior of spironolactone（SP） drug in Britton-Robinson（BR） buffer of pH 2-11 was investigated by differential pulse cathodic stripping voltammetry（DPCSV） and cyclic voltammetry（CV） at hanging mercury dropping electrode（HMDE）.At pH 9-10.5,the DPCSV of SP drug showed two cathodic peaks at1.15 and1.38 V at the HMDE vs.Ag/AgCl reference electrode.In the CV,at pH 9-10,the dependence of the cathodic peak current,Ip,c and peak potential,Ep,c of the second peak（Ep,c2） on the scan rate（n） and on the depolizer（SP） concentrations was typical of an electrode coupled（EC） chemical reaction type mechanism.The plot of Ip,cat 1.380 V of the DPCSV vs.SP concentration at pH 9 was linear over the concentration range of 1.2×1010-9.6×107 M.The lower limit of detection（LLOD） and limit of quantification（LOQ） of the drug were 1.1×1011 and 4.14×1011 M,respectively.The method was successfully applied for the analysis of SP residues in industrial wastewater,in pure form（98.273.1%） and in drug formulations e.g.Aldactones tablet（98.3572.9%）.The method was validated by comparison with HPLC and the official data methods.
基金Funded by the National Basic Research Program of China(No.51504063)the Natural Science Foundation of Liaoning Province of China(No.2014020027)the Fundamental Research Funds for the Central Universities(No.N130407001)
文摘Three different online heat treatment processes were designed to study the effects on the mechanical properties of a 0.19C-1.6Si-1.6Mn（wt%） hot rolled strip steel.The microstructures were characterized by means of SEM,TEM,EPMA,and XRD.The mechanical properties were estimated by tensile tests.Results showed that a satisfying combination of strength and ductility could be obtained through the ferrite relaxation and direct quenching and partitioning process.Analysis was also focused on this process.The microstructure contained proeutectoid ferrite grains,martensite packets and blocky or interlath retained austenite,and also contained carbide-free bainite in the case of relatively high quench temperatures.The retained austenite fraction was increased through proeutectoid ferrite and partial bainite transformation,while the tensile strength was also consequently decreased.The most of retained austenite transformed to ferrite under deformation and the elongation was obviously improved.
