Generation of structured light beams with polarization variation along arbitrary spatial trajectories using tri-layer metasurfaces

Conventionally,the spatially structured light beams produced by metasurfaces primarily highlight the polarization modulation of the beams propagating along the optical axis or the beams'spatial transmission trajectory.In particular,along the optical axis,the polarization state is either constant or varies continuously in each output plane.Here,we develop innovative spatially structured light beams with continually changing polarization along any arbitrary spatial transmission trajectories.With tri-layer metallic metasurfaces,the geometric characteristics of each layer structure can be adjusted to modulate the phase and polarization state of the incident terahertz(THz)wave.The beam will converge to the predefined trajectory along several paths to generate a Bessel-like beam with longitudinal polarization changes.We demonstrate the versatility of the approach by designing two THz-band structured light beams with varying polarization states along the spatial helical transmission trajectory.Continuous linear polarization changes and linear polarization to right circular polarization(RCP)and back to linear polarization changes are realized respectively.The experimental results are basically consistent with the simulated results.Our proposal for arbitrary trajectory structured light beams with longitudinally varying polarization offers a practical method for continuously regulating the characteristics of spatial structured light beams with non-axial transmission.This technique has potential uses in optical encryption,particle manipulation,and biomedical imaging.

Copper Ion Beam Irradiation-Induced Effects on Structural,Morphological and Optical Properties of Tin Dioxide Nanowires

The 0.8 Me V copper （ Cu） ion beam irradiation-induced effects on structural, morphological and optical properties of tin dioxide nanowires （Sn02 NWs） are investigated. The samples are irradiated at three different doses 5 × 10^12 ions/cm2, 1 ×10^13 ions/cm2 and 5 × 10^13 ions/em2 at room temperature. The XRD analysis shows that the tetragonal phase of Sn02 NWs remains stable after Cu ion irradiation, but with increasing irradiation dose level the crystal size increases due to ion beam induced coalescence of NWs. The FTIR spectra of pristine Sn02 NWs exhibit the chemical composition of SnO2 while the Cn-O bond is also observed in the FTIR spectra after Cu ion beam irradiation. The presence of Cu impurity in SnO2 is further confirmed by calculating the stopping range of Cu ions by using TRM/SRIM code. Optical properties of SnO2 NWs are studied before and after Cu ion irradiation. Band gap analysis reveMs that the band gap of irradiated samples is found to decrease compared with the pristine sample. Therefore, ion beam irradiation is a promising technology for nanoengineering and band gap tailoring.

Recent developments in the structural design and optimization of ITER neutral beam manifold

This paper describes a new design of the neutral beam manifold based on a more optimized support system.A proposed alternative scheme has presented to replace the former complex manifold supports and internal pipe supports in the final design phase.Both the structural reliability and feasibility were confirmed with detailed analyses.Comparative analyses between two typical types of manifold support scheme were performed.All relevant results of mechanical analyses for typical operation scenarios and fault conditions are presented.Future optimization activities are described,which will give useful information for a refined setting of components in the next phase.

Dependence of Structural and Optoelectrical Properties on the Composition of Electron Beam Evaporated Zn_xCd_(1-x)S Thin Films

Thin films of ZnxCd1-xS have been prepared by electron beam evaporation of a mixture of ZnS & CdS powders. The films are deposited onto sodalime glass slides under similar conditions.The composition of the films is varied from CdS to ZnS (x=0 to 1). The films show a regular change in color from toner red to orange yellow as Zn concentration increases to maximum.These films are characterized for their optical, electricaI and structural properties. The bandgap value of ZnxCd1-xS films is found to vary linearIy from 2.20 eV to 3.44 eV with change in the x value from 0 to 1. The resistivity of these films is in the range of 171.0 Ωcm to 5.5× 106Ωcm for x=0~0.6. All the samples show cubic structure after annealing in air at 250℃ for 40 min.The lattice constant ao varies from 0.5884 nm to 0.54109 nm linearly.

Optical and Structural Properties of In_(0.52)Al_(0.48)As/InP Structures Grown at Very High Arsenic Overpressures by Molecular Beam Epitaxy

Growth of ln0.52Al0.48As epitaxial layers on lnP(100) substrates by molecular beam epitaxy at a wide range of arsenic overpressures (V/III flux ratios from 30 to 300) has been carried out. Analysis performed using low-temperature photoluminescence (PL) and double-axis X-ray diffraction (XRD) shows a strong and prominent dependence of the PL and XRD linewidths on the V/III flux ratio. Under our growth conditions, both the PL and XRD linewidths exhibit a minimum point at a V/III flux ratio of 150 which corresponds to a maximum in the PL intensity and XRD intensity ratio. Flux ratios exceeding 150 result in an increase in both the PL and XRD linewidths corresponding to a reduction in their associated intensities. Room temperature Raman scattering measurements show a narrowing in the lnAs-like and AlAs-like longitudinal-optic (LO)phonon linewidths which broaden at high flux ratios, while the LO phonon frequencies exhibit a gradual reduction as the flux ratio is increased. PL spectra taken at increasing temperatures show a quenching of the main emission peak followed by the evolution of a broad lower energy emission which is possibly associated with deep lying centres. This effect is more prominent in samples grown at lower V/III flux ratios. Hall effect measurements show a gradual reduction in the mobility in correspondence to an increase in the electron concentration as the flux ratio is increased.

Discrete Element with Flexible Connector for Dynamic Analysis of 3-D Beam Structures

Combined multi-body dynamics with structural dynamics, a new discrete element with flexible connector, which is applicable for 3-D beam structures, is developed in this paper. Both the generalized elastic coefficient matrix of the flexible connector and the mass matrix of discrete element may be off-diagonal in a general case. The zero-length rigid element is introduced to simulate the node at which multiple elements are jointed together. It may also be effective when the axes of adjacent elements are not in the same line. The examples for eigenvalue calculation show that the model is successful. It can be extended to the geometric nonlinear response analysis.

Broadband acoustic focusing by symmetric Airy beams with phased arrays comprised of different numbers of cavity structures

We realize broadband acoustic focusing effect by employing two symmetric Airy beams generated from phased arrays,in which the units of the phased arrays consist of different numbers of cavity structures, each of which is composed of a square cavity and two inclined channels in air. The exotic phenomenon arises from the energy overlapping of the two symmetric Airy beams. Besides, we demonstrate the focusing performance with high self-healing property, and discuss the effects of structure parameters on focusing performance, and present the characteristics of the cavity structure with straight channels. Compared with other acoustic lenses, the proposed acoustic lens has advantages of broad bandwidth（about 1.4 kHz）, high self-healing property of focusing performance, and free adjustment of focal length. Our finding should have great potential applications in ultrasound imaging and medical diagnosis.

New Factor to Characterize Mechanism of “Strong Column-Weak Beam” of RC Frame Structures

Most reinforced concrete(RC)frame structures did not achieve the "strong column-weak beam" failure mode in recent big earthquakes, resulting in a large number of casualties and significant property loss. To deal with this serious problem, a new column-beam relative factor was proposed to characterize the relative yield situation of column ends and beam ends. By limiting the column-beam relative factor, RC frame structures could achieve the "strong column-weak beam" failure mode under the excitation of strong ground motions. The limit values of column-beam relative factor were calculated, analyzed and verified by using structural simulation models for corner columns in the bottom story of structures, which are destroyed most seriously in earthquakes. The results show that the limit values should be analyzed under bi-directional ground motion and with different axial compression ratios of columns. The peak ground acceleration(PGA)of ground motions has no significant effect on the limit values, while the type of strong ground motions has a significant effect on the limit values.

STOCHASTIC BOUNDARY ELEMENT METHOD FOR RELIABILITY ANALYSIS OF PLATE AND BEAMS COMPOSITE STRUCTURES

In this paper, the reliability of orthotropic plate and beams composite structures, which is under the actions of the stochastic loading and stochastic boundary conditions, have been analyzed by stochastic boundary element method. First, the boundary integral equation of orthotropic plate and beams composite structures is given in this paper, and then based on the stochastic boundary element method, the method for reliability analysis of stochastic structures is establishes and formulas for computation of reliability index of orthotropic plate and beams composite structures are obtained. The computed examples show the efficient of the method used in this paper.

MECHANICAL VIBRATIONAL POWER FLOW IN BEAM-PLATE ASSEMBLIES

The vibrational power flow in the beam-plate assemblies and then with the isolators is investigated using analytical ' power flow' approach based on the some concepts of mechanical mo- bility and structural dynamics. Theoretical expressions of the power flow in the structures are given and examined. The numerical results of the expressions are good agreements with the measuring re- sults obtained by the technique of vibration intensity. On the basis of these results, possible ways of reducing the vibrational power flow in the structures are suggested .

Analysis of telescopic beam structure using couple of DOF technique and its application

Couple of DOF technique in FEM and the algorithm for equation group solution in the whole stiffness matrix is studied in this paper. A new procedure is developed for the analysis of telescope beam structure. This method can solve most of the complex structural problems in engineering practice. This method has been used in the FEM analysis of pile frame of muhifunetion drilling machine, which is designed and manufactured by our research group. The right analysis result can improves the design efficiency and the reliability of the structure and reduce the design cost.

Structure and Magnetic Properties of Fe-N Films Prepared by Dual Ion Beam Sputtering

Fe-N films were prepared on Si substrate by dual ion beam sputtering (DIBS). It is found that the crystal structure of the films varies from α-Fe, to ε-Fe2-3N, ε-Fe2-3N +γ-Fe4N, and finally γ'-Fe4N with the increase in substrate temperature (TS). The magnetic properties of the films were investigated by a vibrating sample magnetometer (VSM). The structure of the films is insensitive to the ratios of N2/Ar in main ion source(MIS), and is mainly influenced by the substrate temperature (Ts).

Simultaneous sorting of arbitrary vector structured beams with spin-multiplexed diffractive metasurfaces

Vector structured beams(VSBs)offer infinite eigenstates and open up new possibilities for highcapacity optical and quantum communications by the multiplexing of the states.Therefore,the sorting and measuring of VSBs are extremely important.However,the efficient manipulations of a large number of VSBs have simultaneously remained challenging up to now,especially in integrated optical systems.Here,we propose a compact spin-multiplexed diffractive metasurface capable of continuously sorting and detecting arbitrary VSBs through spatial intensity separation.By introducing a diffractive optical neural network with cascaded metasurface systems,we demonstrate arbitrary VSBs sorters that can simultaneously identify Laguerre–Gaussian modes(l=−4 to 4,p=1 to 4),Hermitian–Gaussian modes(m=1 to 4,n=1 to 3),and Bessel–Gaussian modes(l=1 to 12).Such a sorter for arbitrary VSBs could revolutionize applications in integrated and high-dimensional optical communication systems.

Evolution on spatial patterns of structured laser beams:from spontaneous organization to multiple transformations

Spatial patterns are a significant characteristic of lasers.The knowledge of spatial patterns of structured laser beams is rapidly expanding,along with the progress of studies on laser physics and technology.Particularly in the last decades,owing to the in-depth attention on structured light with multiple degrees of freedom,the research on spatial and spatiotemporal structures of laser beams has been promptly developed.Such beams have hatched various breakthroughs in many fields,including imaging,microscopy,metrology,communication,optical trapping,and quantum information processing.Here,we would like to provide an overview of the extensive research on several areas relevant to spatial patterns of structured laser beams,from spontaneous organization to multiple transformations.These include the early theory of beam pattern formation based on the Maxwell–Bloch equations,the recent eigenmodes superposition theory based on the time-averaged Helmholtz equations,the beam patterns extension of ultrafast lasers to the spatiotemporal beam structures,and the structural transformations in the nonlinear frequency conversion process of structured beams.

Elastic-plastic study on high building with SRC transferring story

A new type of transferring structure for steel reinforced concrete (SRC) beams is used in high building. The pushover analysis method was used to study the failure mechanism and ductility of SRC transferring structure through consulting pseudo-static test results for the structure. And, the occurrence order and position of the plastic hinge, the weak story and seismic capacity of high building with SRC transferring story were also studied through consulting shaking table test results for the high building, showing that the seismic behavior of high building with SRC transferring story is good.

Fracture Behavior of Epoxy Asphalt Pavement on Steel Bridges based on Optical Fiber Sensing Technology and Numerical Simulation

The distributed optical fiber sensing technology was used to investigate the fracture behavior of the Epoxy Asphalt Mixture. The spatial distribution and variation of the strain development with crack propagation were acquired using the brillouin optical time-domain reflectometer through the loading experiments of the composite beam structure. In addition, a finite element model of the composite beam structure was developed to analyze the mechanical responses of the epoxy asphalt mixture using the extended finite element method. The experimental results show that the development of crack propagation becomes instable with the increase of the load, and larger loads will generate deeper cracks. Moreover, the numerical results show that the mechanical response of the crack tip changes with the crack propagation, and the worst areas that subjected to crack damage are located on both sides of the composite beam structure.

BOUNDARY FEEDBACK CONTROL OF ELASTIC BEAM EQUATION WITH STRUCTURAL DAMPING AND STABILITY

In this paper, we consider the partial differential equation of an elastic beam with structuraldamping by boundary feedback control. First, we prove this closed system is well--posed; then weestablish tbe exponential stability for this elastic system by using a theorem whichbelongs to F. L.Huang; finally, we discuss the distribution and multiplicity of the spectrum of this system. Theseresults are very important and useful in practical applications.

High peak power femtosecond cylindrical vector beams generation in a chirped-pulse amplification laser system

Cylindrical vector beams(CVBs),with non-uniform state of polarizations,have become an indispensable tool in many areas of science and technology.However,little research has explored high power CVBs at the femtosecond regime.In this paper,we report on tne generation of high quality CVBs with high peak power and femtosecond pulse duration in a fiber chirped-pulse amplification laser system.The radially(azimuthally)polarized vector beam has been obtained with a pulse duration of 4A0 fs[430 fs]and a maximum average output power of 20.36 W[20.12 W].The maximum output pulse energy is〜20μJ at a repetition rate of 1 MHz,corresponding to a high peak power of-46 MW.The comparison between simulated intensity profiles and measured experimental results suggests that the generated CVBs have a remarkable intensity distribution.The proposed configuration of our laser system provides a promising solution for high quality CVBs generation with the characteristics of high peak power,ultrashort pulse duration,and high mode purity.

Rapid fabrication of microrings with complex cross section using annular vortex beams

A ring-shaped focus, such as a focused vortex beam, has played an important role in microfabrication and optical tweezers.The shape and diameter of the ring-shaped focus can be easily adjusted by the topological charge of the vortex. However,the flow energy is also related to the topological charge, making the individual control of diameter and flow energy of the vortex beam impossible. Meanwhile, the shape of the focus of the vortex beam remains in the hollow ring. Expanding the shape of focus of structural light broadens the applications of the vortex beam in the field of microfabrication. Here, we proposed a ring-shaped focus with controllable gaps by multiplexing the vortex beam and annular beam. The multiplexed beam has several advantages, such as the diameter and flow energy of the focal point can be individually controlled and are not affected by the zero-order beam, and the gap size and position are controllable.

NONLINEAR VIBRATION OF THE COUPLED STRUCTURE OF SUSPENDED-CABLE-STAYED BEAM-1:2 INTERNAL RESONANCE

Through the Galerkin method the nonlinear ordinary differential equations （ODEs） in time are obtained from the nonlinear partial differential equations （PDEs） to describe the mo- tion of the coupled structure of a suspended-cable-stayed beam. In the PDEs, the curvature of main cables and the deformation of cable stays are taken into account. The dynamics of the struc- ture is investigated based on the ODEs when the structure is subjected to a harmonic excitation in the presence of both high-frequency principle resonance and 1：2 internal resonance. It is found that there are typical jumps and saturation phenomena of the vibration amplitude in the struc- ture. And the structure may present quasi-periodic vibration or chaos, if the stiffness of the cable stays membrane and frequency of external excitation are disturbed.