An Approach to Detect Structural Development Defects in Object-Oriented Programs

Structural development defects essentially refer to code structure that violates object-oriented design principles. They make program maintenance challenging and deteriorate software quality over time. Various detection approaches, ranging from traditional heuristic algorithms to machine learning methods, are used to identify these defects. Ensemble learning methods have strengthened the detection of these defects. However, existing approaches do not simultaneously exploit the capabilities of extracting relevant features from pre-trained models and the performance of neural networks for the classification task. Therefore, our goal has been to design a model that combines a pre-trained model to extract relevant features from code excerpts through transfer learning and a bagging method with a base estimator, a dense neural network, for defect classification. To achieve this, we composed multiple samples of the same size with replacements from the imbalanced dataset MLCQ1. For all the samples, we used the CodeT5-small variant to extract features and trained a bagging method with the neural network Roberta Classification Head to classify defects based on these features. We then compared this model to RandomForest, one of the ensemble methods that yields good results. Our experiments showed that the number of base estimators to use for bagging depends on the defect to be detected. Next, we observed that it was not necessary to use a data balancing technique with our model when the imbalance rate was 23%. Finally, for blob detection, RandomForest had a median MCC value of 0.36 compared to 0.12 for our method. However, our method was predominant in Long Method detection with a median MCC value of 0.53 compared to 0.42 for RandomForest. These results suggest that the performance of ensemble methods in detecting structural development defects is dependent on specific defects.

Structure development of carbon-based solar-driven water evaporation systems

Pressing need goes ahead for accessing freshwater in insufficient supply countries and regions,which will become a restrictive factor for human development and production.In recent years,solar-driven water evaporation(SDWE)systems have attracted increasing attention for their specialty in no consume conventional energy,pollution-free,and the high purity of fresh water.In particular,carbon-based photothermal conversion materials are preferred light-absorbing material for SDWE systems because of their wide range of spectrum absorption and high photothermal conversion efficiency based on superconjugate effect.Until now,many carbon-based SDWE systems have been reported,and various structures emerged and were designed to enhance light absorption,optimize heat management,and improve the efficient water transport path.In this review,we attempt to give a comprehensive summary and discussions of structure progress of the carbon-based SDWE systems and their working mechanisms,including carbon nanoparticles systems,single-layer photothermal membrane systems,bi-layer structural photothermal systems,porous carbon-based materials systems,and three dimensional(3D)systems.In these systems,the latest 3D systems can expand the light path by allowing light to be reflected multiple times in the microcavity to increase the light absorption rate,and its large heat exchange area can prompt more water to evaporate,which makes them the promising application foreground.We hope our review can spark the probing of underlying principles and inspiring design strategies of these carbonbased SDWE systems,and further guide device optimizations,eventually promoting in extensive practical applications in the future.

Design and Development of Composite Plywood that Integrates Fire Resistance,Water Resistance and Wear Resistance

In order to improve the fire resistance,water resistance and wear resistance of ordinary plywood products in the wood processing industry,three composite structures of plywood products S1,S2 and S3 were designed in this paper,and a reasonable production process was proposed.Through the physical and mechanical properties and fire resistance testing and technical and economic analysis,the applicability of composite plywood was evaluated.The results of the study showed that the physical mechanics of the three kinds of composite structure plywood met the standard requirements,and their fire resistance was far better than that of ordinary plywood.Among them,the S1 structural board had the best overall physical and mechanical properties.The S3 structural board showed the best fire resistance,which was about 1.9 times more than that of ordinary plywood,and the added cost was the lowest.The thin cork board added to the S2 structural board had poor fire performance since the air in the cork board cavities had a certain combustion-supporting effect,which inhibited the fire resistance of high-pressure laminate(HPL)layer.Moreover,the additional cost of the S2 board was the highest,and its comprehensive performance was the worst.The S3 structural plywood product composed of HPL fireproof board with a thickness of about 1 mm in the surface layer and ordinary plywood with a thickness of about 12 mm in the core layer was the most cost-effective product,which could meet the needs of various fields such as construction,home furnishing,decoration and transportation.

Structure adjustment promotes healthy development of Huaneng

As of the end of 2009, the total installed capacity of Huaneng Group Corporation broke through 100 GW, thus, Huaneng Group became the largest power generation enterprise in the world.

IRP/DSM and Sustainable Development

This paper introduces the energy consumption status in China, elaborate the affects of the unreasonable energy consumption structure on energy environment and sustainable development of economy. Simultaneously, it points out the solution, i.e., to implement integrated resources planning (IRP)/demand side management (DSM), and gives some recommendations on the way of implementing IRP/DSM.

Using of Key Stratum Theory to Study the Structural Development of Roof Aquifer

During the underground mining of coal resources,overlying rocks on the roof of excavated tunnels will be destroyed due to ground pressure,and as a result,part of them will break and fall into the tunnels.How to determine the distribution of fractured areas and fissures presents a major problem for preserving the overlying aquifer.

S&T DEVELOPMENT AND STRUCTURAL READJUSTMENT

S&T development is the eternal theme of the CAS working priorities. The common goal of all the reforms now underway in the CAS system is to promote the S&T cause. As the external situation of the S&T development in China changes, it becomes necessary for the CAS to adopt counter-measures to respond accordingly. This article gives an overall exposition, ranging from a review of the significance of the current drive towards structural readjustment in the CAS, to its main contents, expected targets, principles and the selection of possible options, in addition to a number of concrete suggestions and tentative ideas aired by the author of this article for the on-going drive.Based on the deepening development of the current and full-scale reform drive in the Academy, the CAS leadership had put forward a plan for carrying out a structural readjustment program across the CAS system. To promote this new move, here I would like to offer some of my personal opinions and tentative ideas.

Reflection and Study on the Transfer of International Manufacturing Industries and Chinese Sustainable Development

Ever since the 1960s, especially 1980s, under the background of quickening pace of economic globalization and the regional division of labor around the world, the transfer of manufacturing industries among countries and areas gets great momentum and impetus. During 20-plus years in which China has adopted the policy of opening-up and reforming, our country has played an active role in taking part in the transfer of manufacturing industries. It advances the structural change of national manufacturing industries, accelerates national industrialism and promotes the comprehensive development of regional economics. In this paper, the author makes some initial study on the regularity of transfer of International manufacturing industries, discusses the profound impact of such shift on our national resources, environment, economics and society, and also proposes corresponding suggestions on how to implement the strategy of sustainable development in the process of the shift.

The Development of Community Tourism： A Relational View of Development Economics

By adopting the research method of documentary research, combining the related theory of development economics, and starting with the concept of community tourism, this paper brings forward the ＂Dual Structure＂ and the Kuznets Hypothesis of community tourism, and defines ＂the game theory＂ between the residents of community and tourists, as well as the increasing relationship between the per capita tourism income of community and the Geordie Modulus of community. Conclusively it puts forward the way of developing the tourism and community harmoniously, namely, taking the human as the dominant factor and being joined by the community.

FDI＇s Sustainability and the Sustainable Development of the Yangtze River Delta

The fast development of the Yangtze River Delta of China is closely related to the dense inflows of FDI. The clustering of the foreign capital in this region has brought new projects, technology and business skills, which have given a strong impetus to the fast development of the regional economy and the upgrading of the economic structure. But the sustainability of FDI and its long-term influence have drawn a lot of attention. It is also a problem whether the slow-down of the FDI inflows or its flight will bring negative effect on the sustainable economic development of the Yangtze River Delta. In this paper, we will prove that the inflows of FDI are stable to some degree. It is unlikely that there will be a drastic large-scale FDI flight, so the so-called ＂migratory bird economy＂ will not occur. But the sustainable economic development in the Yangtze River Delta will depend on the continuity of the policies to attract FDI. What should be done includes the policy to promote the accumulation and circulation of the international capital to promote the sustainable development of the regional economy and market.

Study on Sustainable Development Mechanism of rural electricity under the new urbanization

The construction of a new socialist countryside is a strategic focus of future economic and social development of our country, including the construction of rural power grids under the new urbanization and development, it has played a crucial role in supporting and promoting. Due to historical reasons, China has not yet formed a sound and sustainable development of rural power system and management system. In order to meet the requirements under the new urbanization of rural construction, we provide a solid foundation for the development of new rural construction, and long-term development of rural electricity has become an urgent need to study the issue. At present, the reform in the field of rural electrification, rural power enterprise management, rural power system and other existing research we have conducted a preliminary study, but overall, the research in this area is still in the exploratory stage, we need a more systematic and in-depth research and discussion.

Current understanding of multi-species biofilms

Direct observation of a wide range of natural microorganisms has revealed the fact that the majority of microbes persist as surface-attached communities surrounded by matrix materials, called biofilms. Biofilms can be formed by a single bacterial strain. However, most natural biofilms are actually formed by multiple bacterial species. Conventional methods for bacterial cleaning, such as applications of antibiotics and/or disinfectants are often ineffective for biofilm populations due to their special physiology and physical matrix barrier. It has been estimated that billions of dollars are spent every year worldwide to deal with damage to equipment, contamina- tions of products, energy losses, and infections in human beings resulted from microbial biofilms. Microorganisms compete, cooperate, and communicate with each other in multi-species biofilms. Understanding the mechanisms of multi-species hiofilm formation will facilitate the development of methods for combating bacterial hiofilms in clinical, environmental, industrial, and agricultural areas. The most recent advances in the understanding of multi-species biofilms are summarized and discussed in the review.

Influence of Hydrothermal Synthesis Conditions on the Formation of Calcium Silicate Hydrates:from Amorphous to Crystalline Phases

Hydrothermal treatment has been widely applied in the synthesis of well crystalline calcium silicate hydrate（CSH）, such as tobermorite and xonotlite. However, both morphology and crystallinity of CSH are greatly affected by the conditions of hydrothermal treatment including siliceous materials, temperature increase rate and isothermal periods. In this study, the influence of hydrothermal conditions on the growth of nano-crystalline CSH was investigated based on XRD analysis. Results showed that siliceous materials with amorphous nature（i e, nano silica powder） are beneficial to synthesize pure amorphous CSH, while the use of more crystallized siliceous materials（i e, diatomite and quartz powder） leads to producing crystalline CSH. Results also indicate that the formation of tobermorite and xonotlite is greatly affected by the temperature rise rate during hydrothermal treatment.

Research and Application of Management Information Systems

Management Information System provides an effective way for enterprises to improve their competitive abilities. It presents a framework for improving the management models through the design and implementation of effective and high-quality MIS. So it is very important to the modem management of corporations. ERP （Enterprise Resource Planning） system is one of the core parts of MIS, which solves the matter of management model mainly. ERP is a popular method enabling the business processes required to compete with the globalization. The thesis cites SAP R/3 to introduce the general structure and function of ERP. Global Enterprise Resource Planning Implementation is increasingly becoming the successful choice of MIS.

Structured Development Environment Based on the Object-Oriented Concepts

The object oriented software development is a kind of promising software methodology and leading to a wholly new way for solving problems. In the research on the rapid construction of Structured Development Envi- ronment (SDE)that supports detailed design and coding in software development, a generator that can gener- ate the SDE has been applied as a metatool. The kernel of SDE is a syntax-directed editor based on the ob- ject-oriented concepts. The key issue in the design of SDE is how to represent the elements of target language with the class concept and a program internally. In this paper, the key concepts and design of the SDE and its generator as well as the implementation of a prototype are to be discussed.

Preface: Advanced Thin Film Developments and Nano Structures

In this special issue, we invited a few leading materials researchers to present topics in thin films, coatings, and nano structures. Readers will find most recent developments in topics, including recent advances in hard, tough, and low friction nanocomposite coatings; thin films for coating nanomaterials; electroless plating of silver thin films on porous Al2O3 substrate; CrN/Nano Cr interlayer coatings; nano-structured carbide derived carbon （CDC） films and their tribology; predicting interdiffusion in high-temperature coatings; gallium-catalyzed silica nanowire growth; and corrosion protection properties of organofunctional silanes. Authors are from both national laboratories and academia.

Diversity and Evolution of Inflorescences in Celastrales

Inflorescences structures in context of their evolution have been conducted for 60 genera and 170 species of Celastrales （according to APG （Angiosperm Phylogeny Group） III 2009, almost 60% of genera and 15% of species from this taxon of the world flora）. There are two big groups of inflorescences in Celastrales-intercalary （more often） and terminal. For many genera of Celastrales both types of inflorescences can be observed, although the frequency of their occurrence varies. There is an important difference between two types of inflorescences： character of completion of the main axis （the terminal flower present or absent）. Flower opening can be in basipetal （Celastraceae, Brexia） or acropetal （Stackhousiaceae） order. Partial inflorescence types included： simple, compound or umbrellate dichasia, spike, raceme, thyrse. Simple flowers of Parnassia are large, nested on long reproductive shoots, emerging from a rosette, with amplexicaule leaf.

A Methodology for Development of Software Composite-Metrics for Program Control-Flow Structure

This paper reports on a pioneer effort for the establishment of a software composite metric with key capability of distinguishing among different structures. As a part of this effort most of the previously proposed program control-flow complexity metrics are evaluated. It is observed that most of these metrics are inherently limited in distinguishing capability. However, the concept of composite metrics is potentially useful for the development of a practical metrics. This paper presents a methodology for the develop- ment of a practical composite metric using statistical techniques. The proposed metric differs from all previous metrics in 2 ways: (1) It is based on an overall structural analysis of a given program in deeper and broader context. It captures various structural measurements taken from all existing structural levels; (2) It unifies a set of 19 important structural metrics. The compositing model of these metrics is based on statistical techniques rather than on an arbitrary method. Experinces with the pro- posed metric clearly indicate that it distinguishes different structures better than the previous metrics.

The International Mobility of Students Apprentices at the Heart of Building a Skills Economy: the Example of the Corsican Territory

At a time of exacerbated globalization,education,and more generally training,is a key factor for our society,at the heart of territories challenged to renew themselves in the face of the emergence around the globe of new centers of economic and demographic gravity,with their own models.Training,and its link with working life,is a real challenge to face,in the near future,the technological,economic,political and environmental revolutions that we are already facing.Beyond what is called sandwich training or continuing vocational training in Higher Education,the current challenge is indeed around lifelong learning,old concept but whose forms always call for an actualization in modernity.At the heart of a small island territory like Corsica,this challenge is all the more crucial to take up as it foreshadows its attractiveness in a context of glocalisation[8]now durably anchored.In an ever-changing global environment,with moving landmarks,increasingly complex personal and professional lives,and where everything that seemed well compartmentalized yesterday faces increasing porosity,the purpose of this contribution is to explain that the international mobility of students apprentices,at the heart of the construction of a skills economy,is a major strategic issue for the development and structuring of a small territory such as Corsica.