Slope structures and formation of rock–soil aggregate landslides in deeply incised valleys

Rock–soil aggregate landslides(RSALs) are a common geological hazard in deeply incised valleys in southwestern China. Large-scale RSALs are widely distributed in the upper reaches of the Dadu River, Danba County, Sichuan Province, and are influenced by slope structure, which can be divided into open, lock, strip, and dumbbell types, as well as soil type and meso-structure, which can be classified as layered rock–soil aggregate, block-soil, and grainsoil. In this study, the evolution of four types of structures, such as layered-dumbbell, block-soil lock, banded block-soil, and block-soil open types, were analyzed by field surveys, surface and deep displacement monitoring, and Flac3 D. It was found that the Danba reach of the Dadu River showed incised valley through the evolution from wide to slow valley affected by internal and external geological processes since the Quaternary Glaciation. In the layered-dumbbell rock–soil aggregate, the main sliding pattern is multi-stage sliding at different depths. Circular sliding in the trailing edge and plane sliding along the bedrock in the front edge body occurin the block-soil-lock type aggregate. Large-scale multi-level and circular sliding over long distances occur in the banded block-soil aggregate. The blocksoil open type is stable, with only circular sliding occurring in local and shallow surfaces of the body. The monitoring and numerical simulation results further show that slope structure and regularity have diversified with RSALs. The results provide a basis for analyzing the stability mechanism of RSALs and preventing RSALs in deeply incised valleys.

Dynamic spillovers between the term structure of interest rates,bitcoin,and safe‑haven currencies

This study examines the connectedness between the US yield curve components(i.e.,level,slope,and curvature),exchange rates,and the historical volatility of the exchange rates of the main safe-haven fiat currencies(Canada,Switzerland,EURO,Japan,and the UK)and the leading cryptocurrency,the Bitcoin.Results of the static analysis show that the level and slope of the yield curve are net transmitters of shocks to both the exchange rate and its volatility.The exchange rate of the Euro and the volatility of the Euro and the Canadian dollar exchange rate are net transmitters of shocks.Meanwhile,the curvature of the yield curve and the Japanese Yen,Swiss Franc,and British Pound act mainly as net receivers.Our static connectedness analysis shows that Bitcoin is mainly independent of shocks from the yield curve’s level,slope,and curvature,and from any main currency investigated.These findings hint that Bitcoin might provide hedging benefits.However,similar to the static analysis,our dynamic analysis shows that during different periods and particularly in stressful times,Bitcoin is far from being isolated from other currencies or the yield curve components.The dynamic analysis allows us to observe Bitcoin’s connectedness in times of stress.Evidence supporting this contention is the substantially increased connectedness due to policy shocks,political uncertainty,and systemic crisis,implying no empirical support for Bitcoin’s safe-haven property during stress times.The increased connectedness in the dynamic analysis compared with the static approach implies that in normal times and especially in stressful times,Bitcoin has the property of a diversifier.The results may have important implications for investors and policymakers regarding their risk monitoring and their assets allocation and investment strategies.

In-situ testing study on convection and temperature characteristics of a new crushed-rock slope embankment design in a permafrost region

For the purpose of enhancing air convection and controlling solar radiation, a new crushed-rock slope embankment design combined with a sun-shade measure is proposed. A newly designed embankment was constructed in the Tuotuohe section of the Qinghai-Tibet Railway and a field-testing experiment was carried out to determine its convection and temperature characteristics. The results show that distinct air convection occurred in the crushed-rock layer of the new embankment, especially in cold seasons, which was enhanced when it flowed upwards along the slope. This preliminarily indicated that the new design of the embankment slope was good for reinforcing air convection in the crushed-rock layer. The frequent fluctuations of the convection speed and the environmental wind speed were in good agreement, suggesting that the convection in the crushed rock primarily came from the ambient wind. It was also preliminarily determined that the new embankment had a better cooling effect and sun-shade effect for decreasing the temperature of the embankment slope compared with a traditional crushed-rock slope embankment, and the mean temperature difference between them was up to 1.7 °C. The mean annual temperature at the bottom boundary of the crushed-rock layer was obviously lower than that at the top boundary, and heat flux calculation showed that the shallow soil beneath the embankment slope was weakly releasing heat, all of which indicated that the new embankment slope design was beneficial to the thermal stability of the embankment. This study is helpful in providing some references for improved engineering design and maintenance of roadbeds in permafrost regions.

Accelerated recruitment of copepod Calanus hyperboreus in pelagic slope waters of the western Arctic Ocean

Shelf-basin advection is essential to subsistence of the Arctic copepod Calanus hyperboreus population in high basin area. Its abundance, population structure and body size in pelagic layer were investigated with samples collected over a large range in the western Arctic Ocean during summer 2003, to evaluate the geographical variation in recruitment pattern. Calanus hyperboreus was absent from the shallow areas of the Chukchi Sea and most abundant in the slope area between the Chukchi Sea and Chukchi Abyssal Plain（CS-slope）. Total abundance varied between 1 110.0 and 5 815.0 ind./m^2 in the CS-slope area and ranged from 40.0 to 950.0 ind./m^2 in the other areas. Early stages（CI–IV） dominated in the CS-slope area, whereas CV and adult females were frequently recorded only in deep basin areas. Geographical difference of prosome length was most evident in CIII,with average ranging from 2.48 to 2.61 mm at the CS-slope stations and 2.16–2.37 mm at the others. Abundance of early developmental stages（CI–CIV） correlated positively with Chl a concentration, but negative correlation was observed in late stages（CV–adult）. Our results indicated that C. hyperboreus can benefit from primary production increase through accelerated development in the first growth season and the productive CS-slope area is a potential source for slope-basin replenishment.

Wave Reflection Caused by Wave Overtopping and Sloping Top of Spructure

In this paper, the theoretical analysis and experimental studies are employed to investigate the reflection characteristics of partial standing waves caused by wave overtopping and sloping top of structures. Based on the principle of conservation of wave energy flux, the third-order Stokes wave theory is used to formulate the reflection coefficient at wave overtopping; the calculation results are regressed into an applied expression. A series of experiments of wave reflection for a vertical-wall structure with chamfered and overhanging upper sections are carried out to investigate the influence of top slope on wave reflection. The regularity of variation of wave reflection in this case is analysed based on the experimental results.

THE VOF METHOD FOR STUDY OF WAVE RUN-UP AND BREAKING ON A SLOPING STRUCTURE

The volume of fluid method (VOF method) for numerical simulations describing wave run-up on a sloping structure including the overturning. breaking and merging phenomena is presented. The flow motions are governed by the classical, two-dimensional Navier-Stokes equation for incompressible fluid. Computational results concerning the time evolution of the free surface and pressure distribution along water bed and slope boundary are given, showing how an initial solitary wave undergoes run-up, overturning, breaking and merging on the slope. It is found that most of the wave energy is lost after the wave breaking and merging.

Paleogene Tectonic Evolution Controls on Sequence Stratigraphic Patterns in the Central Part of Deepwater Area of Qiongdongnan Basin, Northern South China Sea

In active rift basins, tectonism is extremely important for sequence stratigraphic patterns, affecting both the sequence architecture and internal makeup. Sequence stratigraphic framework of a Paleogene rift succession in Qiongdongnan Basin, northern South China Sea, was built using seismic profiles, complemented by well logs and cores. One first-order and three second-order sequences were identified on the basis of basin-scale unconformities, and seven third-order sequences are defined by unconformities along the basin margins and correlative conformities within the central basin. Through unconformity analysis and backstripping procedure, the Paleogene synrift tectonic evolution of deep- water area of Qiongdongnan Basin was proved to be episodic, which can be divided into rifting stage-I, rifting stage-II and rifting stage-III. Episodic rifting resulted in the formation of various types of struc- tural slope break belts, which controlled different architectures and internal makeup of sequences. This study enhances the understanding of the control of tectonic evolution on sequence stratigraphic pat- terns and establishes relevant patterns in a typical rift basin, and further proposes the favorable sand- stone reservoirs developing in different sequence stratigraphic patterns, which will be pretty helpful for subtle pool exploration in deepwater area of petroliferous basins.

Paleogene Tectonic Evolution Controls on Sequence Stratigraphic Patterns in the Fushan Sag, Northern South China Sea

Tectonism is of extreme importance to sequence stratigraphic patterns in continental sedimentary basins, affecting both the architectures and internal makeup of sequences. Sequence stratigraphic framework of the Paleogene system in the Fushan sag, northern South China Sea, was built using 3D and 2D seismic data, complemented by drilling cores and well logs data. One first-order, three second-order and seven third-order sequences were identified. Analysis of paleotectonic stress field, unconformities and subsidence history showed that the Paleogene tectonic evolution presented significant characteristics of multistage and episode, and can be divided into three stages： rifting stage I（initial rifting period）, rifting stage II（rapid subsidence period）, rifting stage III（fault-depressed diversionary period）. Partition of the west and east in tectonic activity was obvious. The west area showed relatively stronger tectonic activity than the east area, especially during the rifting stage II. Episodic rifting and lateral variations in tectonic activity resulted in a wide variety of structural slope break belts, which controlled both the sequence architectures and interval makeup, and strongly constrained the development of special facies zones or sand bodies that tended to form hydrocarbon accumulation. This paper classifies the genetic types of slope break belts and their relevant sequence stratigraphic patterns within the Fushan sag, and further discusses the tectonic evolution controls on sequence stratigraphic patterns, which suggests that vertical evolution paths of structural slope break belts and relevant sequence stratigraphic patterns as a response to the Paleogene tectonic evolution were strongly controlled by sag margin types and lateral variations of tectonic activity.

Syndepositional Fault Controlling on Depositional Filling of the Third Member of Shahejie Formation in Beitang Sag

In the continental lake basin whose structures were extraordinarily active, tectonism is an important factor in controlling the sequence and the depositional filling of the basin. This article reports the assemble patterns of syndepositional fault in the third member of Shahejie （沙河街） Formation in Beitang （北塘） sag. The results show that the comb-shape fracture system and the fracture transformation zone were developed in Beitang sag. These assemble patterns obviously controlled the sand-body and spatial distribution of sedimentary system. However, the steep slope belt of fault terrace, the multistage slope belt and the low uplift gentle slope belt controlled the development of sequence styles. Analyses of the spatial-temporal relationship of the assemble pattern of syndepositional faults and the sedimentary system help predict the favorable exploration zone.