In marine engine exhaust silencing systems, the presence of exhaust gas flow influences the sound propagation inside the systems and the acoustic attenuation performance of silencers. In order to investigate the effec...In marine engine exhaust silencing systems, the presence of exhaust gas flow influences the sound propagation inside the systems and the acoustic attenuation performance of silencers. In order to investigate the effects of three-dimensional gas flow and acoustic damping on the acoustic attenuation characteristics of marine engine exhaust silencers, a dual reciprocity boundary element method (DRBEM) was developed. The acoustic governing equation in three-dimensional potential flow was derived first, and then the DRBEM numerical procedure is given. Compared to the conventional boundary element method (CBEM), the DRBEM considers the second order terms of flow Mach number in the acoustic governing equation, so it is suitable for the cases with higher Mach number subsonic flow. For complex exhaust silencers, it is difficult to apply the single-domain boundary element method, so a substructure approach based on the dual reciprocity boundary element method is presented. The experiments for measuring transmission loss of silencers are conducted, and the experimental setup and measurements are explained. The transmission loss of a single expansion chamber silencer with extended inlet and outlet were predicted by DRBEM and compared with the measurements. The good agreements between predictions and measurements are observed, which demonstrated that the derived acoustic governing equation and the DRBEM numerical procedure in the present study are correct.展开更多
In this paper the dual reciprocity boundary element method is employed to solve nonlinear differential equation del(2) u + u + epsilon u(3) = b. Results obtained in an example have a good agreement with those by FEM a...In this paper the dual reciprocity boundary element method is employed to solve nonlinear differential equation del(2) u + u + epsilon u(3) = b. Results obtained in an example have a good agreement with those by FEM and show the applicability and simplicity of dual reciprocity method (DRM) in solving nonlinear differential equations.展开更多
Combining Dual Reciprocity Method （DRM） with Hybrid Boundary Node Method （HBNM）, the Dual Reciprocity Hybrid Boundary Node Method （DRHBNM） is developed for three-dimensional linear elasticity problems with body ...Combining Dual Reciprocity Method （DRM） with Hybrid Boundary Node Method （HBNM）, the Dual Reciprocity Hybrid Boundary Node Method （DRHBNM） is developed for three-dimensional linear elasticity problems with body force. This method can be used to solve the elasticity problems with body force without domain integral, which is inevitable by HBNM. To demonstrate the versatility and the fast convergence of this method, some numerical examples of 3-D elasticity problems with body forces are examined. The computational results show that the present method is effective and can be widely applied in solving practical engineering problems.展开更多
In this paper,a substructure method of three-dimensional semi-analytic boundary element is established.The seismic scattering by three-dimensional topography of a hill can be analyzed by the method in frequency domain...In this paper,a substructure method of three-dimensional semi-analytic boundary element is established.The seismic scattering by three-dimensional topography of a hill can be analyzed by the method in frequency domain.Using this method,the computational effort and storage space are reduced considerably.Finally,analytic results are given.展开更多
The scattering of normally incident water waves by two surface-piercing inclined perforated barriers in water with a uniform finite depth is investigated within the framework of linear water wave theory.Considering th...The scattering of normally incident water waves by two surface-piercing inclined perforated barriers in water with a uniform finite depth is investigated within the framework of linear water wave theory.Considering that thin barriers are zero-thickness,a novel numerical method involving the the coupling of the dual boundary element method(DBEM)with damping layers is applied.In order to effectively damp out the reflected waves,two damping layers,instead of pseudoboundaries are implemented near the two side boundaries of the computational domain.Thus,the modified linearized free surface boundary conditions are formulated and used for solving both the ordinary boundary integral equation as well as the hypersingular boundary integral equation for degenerate boundaries.The newly developed numerical method is validated against analytical methods using the matched eigenfunction expansion method for the special case of two vertical barriers or the inclined angle to the vertical being zero.The influence of the length of the two damping layers has been discussed.Moreover,these findings are also validated against previous results for several cases.After validation,the numerical results for the reflection coefficient,transmission coefficient and dissipation coefficient are obtained by varying the inclination angle and porosity-effect parameter.The effects of both the inclination angle and the porosity on the amplitudes of wave forces acting on both the front and rear barriers are also investigated.It is found that the effect of the inclination angle mainly shifts the location of the extremal values of the reflection and the transmission coefficients.Additionally,a moderate value of the porosity-parameter is quite effective at dissipating wave energy and mitigating the wave loads on dual barriers.展开更多
Combining the radial point interpolation method （RPIM）, the dual reciprocity method （DRM） and the hybrid boundary node method （HBNM）, a dual reciprocity hybrid radial boundary node method （DHRBNM） is proposed ...Combining the radial point interpolation method （RPIM）, the dual reciprocity method （DRM） and the hybrid boundary node method （HBNM）, a dual reciprocity hybrid radial boundary node method （DHRBNM） is proposed for linear elasticity. Compared to DHBNM, RPIM is exploited to replace the moving least square （MLS） in DHRBNM, and it gets rid of the deficiency of MLS approximation, in which shape functions lack the delta function property, the boundary condition can not be applied easily and directly and it＇s computational expense is high. Besides, different approximate functions are discussed in DRM to get the interpolation property, in which the accuracy and efficiency for different basis functions are compared. Then RPIM is also applied in DRM to replace the conical function interpolation, which can greatly improve the accuracy of the present method. To demonstrate the effectiveness of the present method, DHBNM is applied for comparison, and some numerical examples of 2-D elasticity problems show that the present method is much more effective than DHBNM.展开更多
A numerical model is developed by use of the boundary integral equation method to investigate the responses of a two-dimensional floating structure. The structure under consideration consisting of two pontoons, is con...A numerical model is developed by use of the boundary integral equation method to investigate the responses of a two-dimensional floating structure. The structure under consideration consisting of two pontoons, is connected by a rigid framework, and linked to the sea floor by a mooring system. The theoretical conception is based on potential theory with hnear external forces, and applied to an arbitrarily shaped body and water depth. The discussion includes the influence of draft and space between pontoons on the responses of the floating structure. Finally, the validity of the method is adequately verified by experimental results.展开更多
A new type of dual boundary integral equations(DBIE)is presented first,through which,a smaller system of equations needs to be solved in fracture analysis.Then a non-conforming crack tip element in two-dimensional pro...A new type of dual boundary integral equations(DBIE)is presented first,through which,a smaller system of equations needs to be solved in fracture analysis.Then a non-conforming crack tip element in two-dimensional problems is proposed.The exact formula for the hypersingular integral over the non-con- forming crack tip element is given next.By virtue of Green's-function-library strategy,a series of stress in- tensity factors(SIF)of different crack orientations,locations and/or sizes in a complicated structure can be obtained easily and efficiently.Finally,several examples of fracture analysis in two dimensions are given to demonstrate the accuracy and efficiency of the method proposed.展开更多
This study focuses on establishing nonconforming crack front elements of quadrilateral and triangular types for 3D crack problems when the dual boundary element method is applied. The asymptotic behavior of the physic...This study focuses on establishing nonconforming crack front elements of quadrilateral and triangular types for 3D crack problems when the dual boundary element method is applied. The asymptotic behavior of the physical variables in the area near the crack front is fully considered in the construction of the shape function. In the developed quadrilateral and triangular crack front elements, the asymptotic term, which captures the asymptotic behavior of the physical variable, is multiplied directly by the conventional Lagrange shape function to form a new crack front shape function. Several benchmark numerical examples that consider pennyshaped cracks and straight-edge crack problems are presented to illustrate the validity and efficiency of the developed crack front elements.展开更多
基金the National Natural Science Foundation of China under Grant No.10474016.
文摘In marine engine exhaust silencing systems, the presence of exhaust gas flow influences the sound propagation inside the systems and the acoustic attenuation performance of silencers. In order to investigate the effects of three-dimensional gas flow and acoustic damping on the acoustic attenuation characteristics of marine engine exhaust silencers, a dual reciprocity boundary element method (DRBEM) was developed. The acoustic governing equation in three-dimensional potential flow was derived first, and then the DRBEM numerical procedure is given. Compared to the conventional boundary element method (CBEM), the DRBEM considers the second order terms of flow Mach number in the acoustic governing equation, so it is suitable for the cases with higher Mach number subsonic flow. For complex exhaust silencers, it is difficult to apply the single-domain boundary element method, so a substructure approach based on the dual reciprocity boundary element method is presented. The experiments for measuring transmission loss of silencers are conducted, and the experimental setup and measurements are explained. The transmission loss of a single expansion chamber silencer with extended inlet and outlet were predicted by DRBEM and compared with the measurements. The good agreements between predictions and measurements are observed, which demonstrated that the derived acoustic governing equation and the DRBEM numerical procedure in the present study are correct.
文摘In this paper the dual reciprocity boundary element method is employed to solve nonlinear differential equation del(2) u + u + epsilon u(3) = b. Results obtained in an example have a good agreement with those by FEM and show the applicability and simplicity of dual reciprocity method (DRM) in solving nonlinear differential equations.
文摘Combining Dual Reciprocity Method （DRM） with Hybrid Boundary Node Method （HBNM）, the Dual Reciprocity Hybrid Boundary Node Method （DRHBNM） is developed for three-dimensional linear elasticity problems with body force. This method can be used to solve the elasticity problems with body force without domain integral, which is inevitable by HBNM. To demonstrate the versatility and the fast convergence of this method, some numerical examples of 3-D elasticity problems with body forces are examined. The computational results show that the present method is effective and can be widely applied in solving practical engineering problems.
基金This project was sponsored by the Earthquake Science Foundation, China
文摘In this paper,a substructure method of three-dimensional semi-analytic boundary element is established.The seismic scattering by three-dimensional topography of a hill can be analyzed by the method in frequency domain.Using this method,the computational effort and storage space are reduced considerably.Finally,analytic results are given.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.51809209 and 11702244)the Open Fund of Key Laboratory of Water-Sediment Sciences and Water Disaster Prevention of Hunan Province(Grant No.2021SS04).
文摘The scattering of normally incident water waves by two surface-piercing inclined perforated barriers in water with a uniform finite depth is investigated within the framework of linear water wave theory.Considering that thin barriers are zero-thickness,a novel numerical method involving the the coupling of the dual boundary element method(DBEM)with damping layers is applied.In order to effectively damp out the reflected waves,two damping layers,instead of pseudoboundaries are implemented near the two side boundaries of the computational domain.Thus,the modified linearized free surface boundary conditions are formulated and used for solving both the ordinary boundary integral equation as well as the hypersingular boundary integral equation for degenerate boundaries.The newly developed numerical method is validated against analytical methods using the matched eigenfunction expansion method for the special case of two vertical barriers or the inclined angle to the vertical being zero.The influence of the length of the two damping layers has been discussed.Moreover,these findings are also validated against previous results for several cases.After validation,the numerical results for the reflection coefficient,transmission coefficient and dissipation coefficient are obtained by varying the inclination angle and porosity-effect parameter.The effects of both the inclination angle and the porosity on the amplitudes of wave forces acting on both the front and rear barriers are also investigated.It is found that the effect of the inclination angle mainly shifts the location of the extremal values of the reflection and the transmission coefficients.Additionally,a moderate value of the porosity-parameter is quite effective at dissipating wave energy and mitigating the wave loads on dual barriers.
基金Project supported by the National Basic Research Program of China (No. 2010CB732006)the CAS/SAFEA International Partnership Program for Creative Research Teams (No. KZCX2-YW-T12)the National Natural Science Foundation of China (No. 11002154)
文摘Combining the radial point interpolation method （RPIM）, the dual reciprocity method （DRM） and the hybrid boundary node method （HBNM）, a dual reciprocity hybrid radial boundary node method （DHRBNM） is proposed for linear elasticity. Compared to DHBNM, RPIM is exploited to replace the moving least square （MLS） in DHRBNM, and it gets rid of the deficiency of MLS approximation, in which shape functions lack the delta function property, the boundary condition can not be applied easily and directly and it＇s computational expense is high. Besides, different approximate functions are discussed in DRM to get the interpolation property, in which the accuracy and efficiency for different basis functions are compared. Then RPIM is also applied in DRM to replace the conical function interpolation, which can greatly improve the accuracy of the present method. To demonstrate the effectiveness of the present method, DHBNM is applied for comparison, and some numerical examples of 2-D elasticity problems show that the present method is much more effective than DHBNM.
文摘A numerical model is developed by use of the boundary integral equation method to investigate the responses of a two-dimensional floating structure. The structure under consideration consisting of two pontoons, is connected by a rigid framework, and linked to the sea floor by a mooring system. The theoretical conception is based on potential theory with hnear external forces, and applied to an arbitrarily shaped body and water depth. The discussion includes the influence of draft and space between pontoons on the responses of the floating structure. Finally, the validity of the method is adequately verified by experimental results.
基金the Aeronautical Science Foundation of China (No.99C53026).
文摘A new type of dual boundary integral equations(DBIE)is presented first,through which,a smaller system of equations needs to be solved in fracture analysis.Then a non-conforming crack tip element in two-dimensional problems is proposed.The exact formula for the hypersingular integral over the non-con- forming crack tip element is given next.By virtue of Green's-function-library strategy,a series of stress in- tensity factors(SIF)of different crack orientations,locations and/or sizes in a complicated structure can be obtained easily and efficiently.Finally,several examples of fracture analysis in two dimensions are given to demonstrate the accuracy and efficiency of the method proposed.
基金the National Natural Science Foundation of China (Grant Nos. 11602229 and 11602082)Hunan Provincial Natural Science Foundation of China (Grant No. 2017JJ3061)Key Scientific and Technological Project of Henan Province (Grant No. 192102210227).
文摘This study focuses on establishing nonconforming crack front elements of quadrilateral and triangular types for 3D crack problems when the dual boundary element method is applied. The asymptotic behavior of the physical variables in the area near the crack front is fully considered in the construction of the shape function. In the developed quadrilateral and triangular crack front elements, the asymptotic term, which captures the asymptotic behavior of the physical variable, is multiplied directly by the conventional Lagrange shape function to form a new crack front shape function. Several benchmark numerical examples that consider pennyshaped cracks and straight-edge crack problems are presented to illustrate the validity and efficiency of the developed crack front elements.
