Numerical Study of the Vibrations of Beams with Variable Stiffness under Impulsive or Harmonic Loading

The behavior of beams with variable stiffness subjected to the action of variable loadings (impulse or harmonic) is analyzed in this paper using the successive approximation method. This successive approximation method is a technique for numerical integration of partial differential equations involving both the space and time, with well-known initial conditions on time and boundary conditions on the space. This technique, although having been applied to beams with constant stiffness, is new for the case of beams with variable stiffness, and it aims to use a quadratic parabola (in time) to approximate the solutions of the differential equations of dynamics. The spatial part is studied using the successive approximation method of the partial differential equations obtained, in order to transform them into a system of time-dependent ordinary differential equations. Thus, the integration algorithm using this technique is established and applied to examples of beams with variable stiffness, under variable loading, and with the different cases of supports chosen in the literature. We have thus calculated the cases of beams with constant or variable rigidity with articulated or embedded supports, subjected to the action of an instantaneous impulse and harmonic loads distributed over its entire length. In order to justify the robustness of the successive approximation method considered in this work, an example of an articulated beam with constant stiffness subjected to a distributed harmonic load was calculated analytically, and the results obtained compared to those found numerically for various steps (spatial h and temporal τ ¯ ) of calculus, and the difference between the values obtained by the two methods was small. For example for ( h=1/8 , τ ¯ =1/ 64 ), the difference between these values is 17%.

MHD flow of upper-convected Maxwell fluid over porous stretching sheet using successive Taylor series linearization method

This paper investigates the magnetohydrodynamic （MHD） boundary layer flow of an incompressible upper-convected Maxwell （UCM） fluid over a porous stretching surface. Similarity transformations are used to reduce the governing partial differential equations into a kind of nonlinear ordinary differential equations. The nonlinear prob- lem is solved by using the successive Taylor series linearization method （STSLM）. The computations for velocity components are carried out for the emerging parameters. The numerical values of the skin friction coefficient are presented and analyzed for various parameters of interest in the problem.

Hybrid Methods for Computing the Streamfunction and Velocity Potential for Complex Flow Fields over Mesoscale Domains

Three types of previously used numerical methods are revisited for computing the streamfunctionψand velocity potentialχfrom the horizontal velocity v in limited domains.The first type,called the SOR-based method,uses a classical successive over-relaxation(SOR)scheme to computeψ(orχ)first with an arbitrary boundary condition(BC)and thenχ(orψ)with the BC derived from v.The second type,called the spectral method,uses spectral formulations to construct the inner part of(ψ,χ)-the inversion of(vorticity,divergence)with a homogeneous BC,and then the remaining harmonic part of(ψ,χ)with BCs from v.The third type,called the integral method,uses integral formulas to compute the internally induced(ψ,χ)-the inversion of domain-internal(vorticity,divergence)using the free-space Greenꞌs function without BCs and then the remaining harmonicψ(orχ)with BCs from v minus the internally-induced part.Although these methods have previously been successfully applied to flows in large-scale and synoptic-scale domains,their accuracy is compromised when applied to complex flows over mesoscale domains,as shown in this paper.To resolve this problem,two hybrid approaches,the integral-SOR method and the integral-spectral method,are developed by combining the first step of the integral method with the second step adopted from the SOR-based and spectral methods,respectively.Upon testing these methods on real-case complex flows,the integral-SOR method is significantly more accurate than the integral-spectral method,noting that the latter is still generally more accurate than the three previously-used methods.The integral-SOR method is recommended for future applications and diagnostic studies of complex flows.

A Successive Shift Box-Counting Method for Calculating Fractal Dimensions and Its Application in Identification of Faults

Fractal dimensions of a terrain quantitatively describe the self-organizedstructure of the terrain geometry. However, the local topographic variation cannot be illustrated bythe conventional box-counting method. This paper proposes a successive shift box-counting method,in which the studied object is divided into small sub-objects that are composed of a series of gridsaccording to its characteristic scaling. The terrain fractal dimensions in the grids are calculatedwith the successive shift box-counting method and the scattered points with values of fractaldimensions are obtained. The present research shows that the planar variation of fractal dimensionsis well consistent with fault traces and geological boundaries.

Modified iterative method for augmented system

The successive overrelaxation-like （SOR-like） method with the real param- eters ω is considered for solving the augmented system. The new method is called the modified SOR-like （MSOR-like） method. The functional equation between the parameters and the eigenvalues of the iteration matrix of the MSOR-like method is given. Therefore, the necessary and sufficient condition for the convergence of the MSOR-like method is derived. The optimal iteration parameter ω of the MSOR-like method is derived. Finally, the proof of theorem and numerical computation based on a particular linear system are given, which clearly show that the MSOR-like method outperforms the SOR-like （Li, C. J., Li, B. J., and Evans, D. J. Optimum accelerated parameter for the GSOR method. Neural, Parallel ＆ Scientific Computations, 7（4）, 453-462 （1999）） and the modified sym- metric SOR-like （MSSOR-like） methods （Wu, S. L., Huang, T. Z., and Zhao, X. L. A modified SSOR iterative method for augmented systems. Journal of Computational and Applied Mathematics, 228（4）, 424-433 （2009））.

ASYMPTOTIC STABILITY OF RAREFACTION WAVE FOR GENERALIZED BURGERS EQUATION

This paper is concerned with the stability of the rarefaction wave for the Burgers equationwhere 0 ≤ a < 1/4p (q is determined by (2.2)). Roughly speaking, under the assumption that u_ < u+, the authors prove the existence of the global smooth solution to the Cauchy problem (I), also find the solution u(x, t) to the Cauchy problem (I) satisfying sup |u(x, t) -uR(x/t)| → 0 as t → ∞, where uR(x/t) is the rarefaction wave of the non-viscous Burgersequation ut + f(u)x = 0 with Riemann initial data u(x, 0) =

交直流混合输电线路空间电场分析(英文)

As the transmission line corridors become more and more rare in China,it is now inevitable for people to construct HVAC-HVDC hybrid transmission lines.The research on the electric field around the transmission lines plays an important role in evaluating the electromagnetic environment nearby.However,few existing research now considered the mutual effect of HVAC-HVDC hybrid transmission lines.Thus,this research designed a program based on windows,which calculated the surface voltage gradient on the transmission lines and the electric field at ground level respectively.This research calculated the surface voltage gradient on the transmission lines by applying the improved method of successive images.For the electric field at ground level under AC transmission line,simulation charge method is used,while for the electric field at the ground level under DC transmission lines,deutsch assumption method is used.Comparing the results generated by the calculation with those in published literature,the program is reliable.Taking 500 kV transmission lines as an example,when considering the mutual effect of the HVAC-HVDC lines,the amplitude of the surface voltage gradient will increase by about 10%and the amplitude of the electric field at ground level will increase by about 8%,making the mutual effect of the AC and DC lines unneglectable. Larger part of the electric field at ground level under hybrid lines is produced by the DC line.Thus,in order to control the electric field at ground level under hybrid lines,it should pay more attention on that produced by the DC line.

Simultaneous effects of chemical reaction and Ohmic heating with heat and mass transfer over a stretching surface: A numerical study

In this article, we have considered the simultaneous influence of ohmic heating and chemical reaction on heat and mass transfer over a stretching sheet. The effects of applied magnetic field are also taken into consideration while the induced magnetic field is not considered due to very small magnetics Reynolds number. The governing flow problem comprises of momentum, continuity, thermal energy and concentration equation which are transformed into highly nonlinear coupled ordinary differential equations by means of similarity transforms, which are then, solved numerically with the help of Successive Linearization method(SLM) and Chebyshev Spectral collocation method. Numerical values of skin friction coefficient, local Nusselt number, and Sherwood number are also taken into account with the help of tables. The physical influence of the involved parameters of flow velocity, temperature and concentration distribution is discussed and demonstrated graphically. The numerical comparison is also presented with the existing published results and found that the present results are in excellent agreement which also confirms the validity of the present methodology.

Epistemic-Based Investigation of the Probability of Hazard Scenarios Using Bayesian Network for the Lifting Operation of Floating Objects

Owing to the increase in unprecedented accidents with new root causes in almost all operational areas, the importance of risk management has dramatically risen. Risk assessment, one of the most significant aspects of risk management, has a substantial impact on the system-safety level of organizations, industries, and operations. If the causes of all kinds of failure and the interactions between them are considered, effective risk assessment can be highly accurate. A combination of traditional risk assessment approaches and modern scientific probability methods can help in realizing better quantitative risk assessment methods. Most researchers face the problem of minimal field data with respect to the probability and frequency of each failure. Because of this limitation in the availability of epistemic knowledge, it is important to conduct epistemic estimations by applying the Bayesian theory for identifying plausible outcomes. In this paper, we propose an algorithm and demonstrate its application in a case study for a light-weight lifting operation in the Persian Gulf of Iran. First, we identify potential accident scenarios and present them in an event tree format. Next, excluding human error, we use the event tree to roughly estimate the prior probability of other hazard-promoting factors using a minimal amount of field data. We then use the Success Likelihood Index Method(SLIM) to calculate the probability of human error. On the basis of the proposed event tree, we use the Bayesian network of the provided scenarios to compensate for the lack of data. Finally, we determine the resulting probability of each event based on its evidence in the epistemic estimation format by building on two Bayesian network types: the probability of hazard promotion factors and the Bayesian theory. The study results indicate that despite the lack of available information on the operation of floating objects, a satisfactory result can be achieved using epistemic data.

A stochastic user equilibrium model solving overlapping path and perfectly rational issues

Traffic assignment has been recognized as one of the key technologies in supporting transportation planning and operations.To better address the perfectly rational issue of the expected utility theory(EUT)and the overlapping path issue of the multinomial logit(MNL)model that are involved in the traffic assignment process,this paper proposes a cumulative prospect value(CPV)-based generalized nested logit(GNL)stochastic user equilibrium(SUE)model.The proposed model uses CPV to replace the utility value as the path performance within the GNL model framework.An equivalent mathematical model is provided for the proposed CPV-based GNL SUE model,which is solved by the method of successive averages(MSA).The existence and equivalence of the solution are also proved for the equivalent model.To demonstrate the performance of the proposed CPV-based GNL SUE model,three road networks are selected in the empirical test.The results show that the proposed model can jointly deal with the perfectly rational issue and the overlapping path issue,and additionally,the proposed model is shown to be applicable for large road networks.

Application of SSOR-PCGM with improved iteration format in FEM simulation of massive concrete

In this study, for the purpose of improving the efficiency and accuracy of numerical simulation of massive concrete, the symmetric successive over relaxation-preconditioned conjugate gradient method （SSOR-PCGM） with an improved iteration format was derived and applied to solution of large sparse symmetric positive definite linear equations in the computational process of the finite element analysis. A three-dimensional simulation program for massive concrete was developed based on SSOR-PCGM with an improved iteration format. Then, the programs based on the direct method and SSOR-PCGM with an improved iteration format were used for computation of the Guandi roller compacted concrete （RCC） gravity dam and an elastic cube under free expansion. The comparison and analysis of the computational results show that SSOR-PCGM with the improved iteration format occupies much less physical memory and can solve larger-scale problems with much less computing time and flexible control of accuracy.

APPROXIMATION OF SOLUTION OF LINEAR DIFFERENTIAL EQUATION WITH ALMOST PERIOD FUNCTION COEFFICIENTS

This paper is devoted to the study of approximation of the solution for the differential equation whose coefficients are almost period functions. To this end the authors establish the estimation of the solution of general linear differential equation for infinite interval case. For finite interval case, this equation was investigated by G. Tamarkin([1]) applying the Picard method of successive approximation.

Generalized nested logit-based stochasticuser equilibrium model with distance constraint of electric vehicles

Considering the range anxiety issue caused by the limited driving range and the scarcity of battery charging stations,the conventional multinomial logit(MNL)model with the overlapping path issue was used in route choice modeling to describe the route choice behavior of travelers effectively.Furthermore,the generalized nested logit-based stochastic user equilibrium(GNL-SUE)model with the constraints of multiple user classes and distance limits was proposed.A mathematical model was developed and solved by the method of successive averages.The mathematical model was proven to be analytically equivalent to the modified GNL-SUE model,and the uniqueness of the solution was also confirmed.The proposed mathematical model was tested and compared with the GNL-SUE model without a distance limit and the MNL-SUE model with a distance limit.Results show that the proposed mathematical model can effectively handle the range anxiety and overlapping path challenges.

Data correction of the force balanced accelerometer

ＩｎｔｒｏｄｕｃｔｉｏｎＤｉｇｉｔａｌｓｔｒｏｎｇｇｒｏｕｎｄａｃｅｌｅｒａｔｉｏｎｏｂｓｅｒｖａｔｉｏｎｉｎｓｔｒｕｍｅｎｔ，ｓｕｃｈａｓＰＤＲ１，ＳＳＡ１ａｎｄＳＳＲ１ｐｒｏｄｕｃｅｄｂｙＫｉｎｅｍｅｔｒｉｃｓＩｎｃ．，ＵＳＡａｎｄＳＣＱ?..

Non-Convex Optimization of Resource Allocation in Fog Computing Using Successive Approximation

Fog computing can deliver low delay and advanced IT services to end users with substantially reduced energy consumption.Nevertheless,with soaring demands for resource service and the limited capability of fog nodes,how to allocate and manage fog computing resources properly and stably has become the bottleneck.Therefore,the paper investigates the utility optimization-based resource allocation problem between fog nodes and end users in fog computing.The authors first introduce four types of utility functions due to the diverse tasks executed by end users and build the resource allocation model aiming at utility maximization.Then,for only the elastic tasks,the convex optimization method is applied to obtain the optimal results;for the elastic and inelastic tasks,with the assistance of Jensen’s inequality,the primal non-convex model is approximated to a sequence of equivalent convex optimization problems using successive approximation method.Moreover,a two-layer algorithm is proposed that globally converges to an optimal solution of the original problem.Finally,numerical simulation results demonstrate its superior performance and effectiveness.Comparing with other works,the authors emphasize the analysis for non-convex optimization problems and the diversity of tasks in fog computing resource allocation.

On filter-successive linearization methods for nonlinear semidefinite programming

In this paper we present a filter-successive linearization method with trust region for solutions of nonlinear semidefinite programming. Such a method is based on the concept of filter for nonlinear programming introduced by Fletcher and Leyffer in 2002. We describe the new algorithm and prove its global convergence under weaker assumptions. Some numerical results are reported and show that the new method is potentially efficient.

A SUCCESSIVE LEAST SQUARES METHOD FOR STRUCTURED TOTAL LEAST SQUARES

A new method for Total Least Squares (TLS) problems is presented. It differs from previous approaches and is based on the solution of successive Least Squares problems. The method is quite suitable for Structured TLS (STLS) problems. We study mostly the case of Toeplitz matrices in this paper. The numerical tests illustrate that the method converges to the solution fast for Toeplitz STLS problems. Since the method is designed for general TLS problems, other structured problems can be treated similarly.

ASYMPTOTICALLY OPTIMAL SUCCESSIVE OVERRELAXATION METHODS FOR SYSTEMS OF LINEAR EQUATIONS

We present a class of asymptotically optimal successive overrelaxation methods for solving the large sparse system of linear equations. Numerical computations show that these new methods are more efficient and robust than the classical successive overrelaxation method.

On linearization method to MHD boundary layer convective heat transfer with low pressure gradient

The paper highlights the application of a recent semi-numerical successive linearization method(SLM)in solving highly coupled,nonlinear boundary value problem.The method is presented in detail by solving the problem of boundary layer convective heat transfer with low pressure gradient in the presence of viscous dissipation and radiation effects.The effects of the parameters on the flow are investigated.The velocity,temperature,skinfriction,and heat transfer coefficients have been obtained and discussed for various physical parametric values.

Regression analysis and features of negative activation energy for MHD nanofluid flow model:A comparative study

This article elucidates the impact of activation energy on magnetohydrodynamic(MHD)stagnation point nanofluid flow over a slippery surface in a porous regime with thermophoretic and Brownian diffusions.Negative activation energy is scarce in practice,but the impact of negative activation energy could not be neglected as it is noticed in chemical processes.The rate of some Arrhenius-compliant reactions is retarded by increasing the temperature and is therefore associated with negative activation energies,such as exothermic binding of urea or water.In some processes,the temperature dependence of the pressure-induced unfolding and the urea-induced unfolding of proteins at ambient pressure give negative activation energies.The present mathematical model is solved with successive linearization method(a spectral technique).A comparison of results is made for negative and positive values of activation energy.Apart from it,the quadratic multiple regression model is discussed briefly and explained with bar diagrams.It is observed that with rise in unsteadiness parameter from 0 to 1(taking positive activation energy),skin friction and Sherwood number are increased by 9.36%and 19%respectively,and Nusselt number is decreased by 26%.However,for negative activation energy,9.36%and 112%enhancement is observed in skin friction and Sherwood number,respectively.