Sugarcane shoots and leaves consist of 38% cellulose, 30.6% hemicellulose and 12.8% lignin on dry solid （DS） basis and have the potential to serve as low cost feedstocks for ethanol production. The pretreatment and ...Sugarcane shoots and leaves consist of 38% cellulose, 30.6% hemicellulose and 12.8% lignin on dry solid （DS） basis and have the potential to serve as low cost feedstocks for ethanol production. The pretreatment and enzymatic hydrolysis conditions include particle size, alkali （NaOH）/dilute acid （H2SO4） pretreatment, chemical and substrate concentrations, temperature, autoclaving time for pretreatment, enzyme concentration, pH and temperature for hydrolysis varied were evaluated for conversion of sugarcane shoots and leaves cellulose and hemicellulose to reducing sugar. The optimum conditions were accomplished by using 14% w/v DS of 0-10 mm sugarcane shoots and leaves in particle size, pretreated with 1.5% w/v of dilute sulfuric acid at 121℃, 15 lbs/in2 for 15 min and enzymatic saccharification using 40 FPU/g DS cellulose at 50℃ and pH 5, After incubating at 160 rpm for 12 hrs, 59 g/L or 386,38 mg/g DS of reducing sugar and 50.69% saccharification were obtained.展开更多
Sugarcane shoots and leaves consist of 35.2% cellulose, 23.43% hemicellulose, 12.6% lignin and 6.59% ash on dry solid （DS） basis and have the potential to serve as low cost feedstocks for ethanol production. To impr...Sugarcane shoots and leaves consist of 35.2% cellulose, 23.43% hemicellulose, 12.6% lignin and 6.59% ash on dry solid （DS） basis and have the potential to serve as low cost feedstocks for ethanol production. To improve the enzymatic digestibility of these biomass and bioethanol production, three pretreatment methods had been investigated and compared, including： （1） 2% w/v NaOH solution autoclaving pretreatment; （2） 2% w/v H2SO4 solution autoclaving pretreatment and （3） two steps of 2% w/v NaOH solution autoclaving followed by 2% w/v H2SO4 solution autoclaving pretreatment. Among them, the best result for ethanol production was obtained when 15 g DS of sugarcane shoots and leaves was pretreated by using two step of 2% w/v NaOH solution autoclaving followed by 2% w/v H2SO4 solution autoclaving. The highest ethanol concentration 30.40 g/L （92.65% in fermentation efficiency） was obtained from reducing sugar 89.25 g/L at 48 h. Moreover, the washing step of solid residue after pretreatment could reduce furfural and hydroxymethylfurfural （HMF） in all pretreatment methods when compared to unwashing solid residue after pretreatment.展开更多
文摘Sugarcane shoots and leaves consist of 38% cellulose, 30.6% hemicellulose and 12.8% lignin on dry solid （DS） basis and have the potential to serve as low cost feedstocks for ethanol production. The pretreatment and enzymatic hydrolysis conditions include particle size, alkali （NaOH）/dilute acid （H2SO4） pretreatment, chemical and substrate concentrations, temperature, autoclaving time for pretreatment, enzyme concentration, pH and temperature for hydrolysis varied were evaluated for conversion of sugarcane shoots and leaves cellulose and hemicellulose to reducing sugar. The optimum conditions were accomplished by using 14% w/v DS of 0-10 mm sugarcane shoots and leaves in particle size, pretreated with 1.5% w/v of dilute sulfuric acid at 121℃, 15 lbs/in2 for 15 min and enzymatic saccharification using 40 FPU/g DS cellulose at 50℃ and pH 5, After incubating at 160 rpm for 12 hrs, 59 g/L or 386,38 mg/g DS of reducing sugar and 50.69% saccharification were obtained.
文摘Sugarcane shoots and leaves consist of 35.2% cellulose, 23.43% hemicellulose, 12.6% lignin and 6.59% ash on dry solid （DS） basis and have the potential to serve as low cost feedstocks for ethanol production. To improve the enzymatic digestibility of these biomass and bioethanol production, three pretreatment methods had been investigated and compared, including： （1） 2% w/v NaOH solution autoclaving pretreatment; （2） 2% w/v H2SO4 solution autoclaving pretreatment and （3） two steps of 2% w/v NaOH solution autoclaving followed by 2% w/v H2SO4 solution autoclaving pretreatment. Among them, the best result for ethanol production was obtained when 15 g DS of sugarcane shoots and leaves was pretreated by using two step of 2% w/v NaOH solution autoclaving followed by 2% w/v H2SO4 solution autoclaving. The highest ethanol concentration 30.40 g/L （92.65% in fermentation efficiency） was obtained from reducing sugar 89.25 g/L at 48 h. Moreover, the washing step of solid residue after pretreatment could reduce furfural and hydroxymethylfurfural （HMF） in all pretreatment methods when compared to unwashing solid residue after pretreatment.
