Three CeO_2 samples with different morphologies, i.e., cubes, rods, and spindles, were synthesized and investigated for 2-chloroethyl ethyl sulfide（2-CEES） degradation. The samples were characterized using scanning ...Three CeO_2 samples with different morphologies, i.e., cubes, rods, and spindles, were synthesized and investigated for 2-chloroethyl ethyl sulfide（2-CEES） degradation. The samples were characterized using scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, the Brunauer-Emmett-Teller method, and temperature-programmed CO_2 desorption. It was found that morphologies of CeO_2 could strongly affect the surface properties and the 2-CEES degradation activities. The surface basicity and the continuous 2-CEES degradation activity of spindle-like CeO_2 were much better than those of the other CeO_2 samples, although all the samples had identical chemical compositions. That was benefited by the largest surface area, abundant microcracks, and surface oxygen vacancies of the spindle-like CeO_2.展开更多
A series of sulfated CeO2 catalysts were synthesized by impregnation and sol-gel methods and used for selective catalytic reduction （SCR） of NOx by NH3. The results showed that the sulfated CeO2 catalysts prepared b...A series of sulfated CeO2 catalysts were synthesized by impregnation and sol-gel methods and used for selective catalytic reduction （SCR） of NOx by NH3. The results showed that the sulfated CeO2 catalysts prepared by sol-gel method showed excellent catalytic activity at 150-50 ℃, and more than 90% NOx conversion was obtained at 232-450 ℃ with a gas hourly space velocity of 60000 h-1. The catalysts were characterized by X-ray diffraction （XRD）, N2 adsorption, Raman, thermogravimetry （TG）, H2-tem- perature-programmed reduction （H2-TPR） and Py-infrared spectroscopy （Py-IR）. The excellent SCR performance was associated with the surface acidity and the micro-structure. The introduction of sulfate acid into CeO2 could increase the amount of BrOnsted and Lewis acid sites over the catalysts, resulting in the improvement of the low temperature activity. The sulfated CeO2 catalysts prepared by sol-gel method possessed lower crystallization degree, excellent redox property and larger specific surface areas, which were responsible for the superior SCR performance.展开更多
基金supported by the National Key Research and Development Program of China(2016YFC0205001)
文摘Three CeO_2 samples with different morphologies, i.e., cubes, rods, and spindles, were synthesized and investigated for 2-chloroethyl ethyl sulfide（2-CEES） degradation. The samples were characterized using scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, the Brunauer-Emmett-Teller method, and temperature-programmed CO_2 desorption. It was found that morphologies of CeO_2 could strongly affect the surface properties and the 2-CEES degradation activities. The surface basicity and the continuous 2-CEES degradation activity of spindle-like CeO_2 were much better than those of the other CeO_2 samples, although all the samples had identical chemical compositions. That was benefited by the largest surface area, abundant microcracks, and surface oxygen vacancies of the spindle-like CeO_2.
基金Project supported by the National Natural Science Foundation of China(U1137603,21307047)the Opening Project of Key Laboratory of Green Catalysis of Sichuan Institutes of High Education(LYJ1309)Academic Newcomer Award of Yunnan Province
文摘A series of sulfated CeO2 catalysts were synthesized by impregnation and sol-gel methods and used for selective catalytic reduction （SCR） of NOx by NH3. The results showed that the sulfated CeO2 catalysts prepared by sol-gel method showed excellent catalytic activity at 150-50 ℃, and more than 90% NOx conversion was obtained at 232-450 ℃ with a gas hourly space velocity of 60000 h-1. The catalysts were characterized by X-ray diffraction （XRD）, N2 adsorption, Raman, thermogravimetry （TG）, H2-tem- perature-programmed reduction （H2-TPR） and Py-infrared spectroscopy （Py-IR）. The excellent SCR performance was associated with the surface acidity and the micro-structure. The introduction of sulfate acid into CeO2 could increase the amount of BrOnsted and Lewis acid sites over the catalysts, resulting in the improvement of the low temperature activity. The sulfated CeO2 catalysts prepared by sol-gel method possessed lower crystallization degree, excellent redox property and larger specific surface areas, which were responsible for the superior SCR performance.
