High performance photodegradation resistant PVA@TiO_(2)/carboxyl-PES self-healing reactive ultrafiltration membrane

The occurrence of ultrafiltration(UF)membrane fouling frequently hampers the sustainable advancement of UF technology.Reactive self-cleaning UF membranes can effectively alleviate the problem of membrane fouling.Nevertheless,the self-cleaning process may accelerate membrane aging.Addressing these concerns,we present an innovative design concept for composite self-healing materials based on self-cleaning UF membranes.To begin,TiO_(2)nanoparticles were incorporated into the polymer molecular structure via molecular design,resulting in the synthesis of TiO_(2)/carboxyl-polyether sulfone(PES)hybrid materials.Subsequently,the nonsolvent-induced phase inversion technique was employed to prepare a novel of UF membrane.Lastly,a polyvinyl alcohol(PVA)hydrogel coating was applied to the hybrid UF membrane surface to create PVA@TiO_(2)/carboxyl-PES self-healing reactive UF membranes.By establishing a covalent bond,the TiO_(2)nanoparticles were effectively and uniformly dispersed within the UF membrane,leading to exceptional self-cleaning properties.Furthermore,the water-absorbing and swelling properties of PVA hydrogel,along with its capacity to form hydrogen bonds with water molecules,resulted in UF membranes with improved hydrophilicity and active self-healing abilities.The results demonstrated that the water contact angle of PVA@5%TiO_(2)/carboxyl-PES UF membrane was 43.1°.Following a 1-h exposure to simulated solar exposure,the water flux recovery ratio increased from 48.16%to 81.03%.Moreover,even after undergoing five cycles of 12-h simulated sunlight exposure,the UF membranes exhibited a consistent retention rate of over 97%,thus fully demonstrating their exceptional self-cleaning,antifouling,and selfhealing capabilities.We anticipate that the self-healing reactive UF membrane system will serve as a pioneering and comprehensive solution for the self-cleaning antifouling challenges encountered in UF membranes while also effectively mitigating the aging effects of reactive UF membranes.

Regulating interfacial behavior of zinc metal anode via metal-organic framework functionalized separator

Aqueous zinc ion batteries(AZIBs)are one of the promising energy storage devices.However,uncontrolled dendrite and side reactions have seriously hindered its further application.In this study,the metal-organic framework(MOF)functionalized glass fiber separator(GF-PFC-31)was used to regulate interfacial behavior of zinc metal anode,enabling the development of high-performance AZIBs.In PFC-31,there areπ-πinteractions between two adjacent benzene rings with a spacing of 3.199 A.This spacing can block the passage of[Zn(H_(2)O)_6]^(2+)(8.6 A in diameter)through the GF-PFC-31 separator to a certain extent,which promotes the deposition process of Zn ions.In addition,the sulfonic acid group(-S03H)contained in GF-PFC-31 can form a hydrogen bonding network with H_(2)O,which can provide a desolvation effect and reduce the side reaction.Consequently,GF-PFC-31 separator achieves uniform deposition of Zn ions.The Zn‖GF-PFC-31‖Zn symmetric cell exhibits stable cycle life(3000 h at 1.2 mA cm^(-2),2000 h at 0.3 mA cm^(-2),and 2000 h at 5.0 mA cm^(-2)),and Zn‖GF-PFC-31‖MnO_(2) full cell with GF-PFC-31 separator can cycle for 1000 cycles at 1.2 A g^(-1)with capacity retention rate of 82.5%.This work provides a promising method to achieve high-performance AZIBs.

Creating large EMS populations for functional genomics and breeding in wheat

Wheat germplasm is a fundamental resource for basic research,applied studies,and wheat breeding,which can be enriched normally by several paths,such as collecting natural lines,accumulating breeding lines,and introducing mutagenesis materials.Ethyl methane sulfonate(EMS)is an alkylating agent that can effectively introduce genetic variations in a wide variety of plant species.In this study,we created a million-scale EMS population(MEP)that started with the Chinese wheat cultivars‘Luyan 128’,‘Jimai 38’,‘Jimai 44’,and‘Shannong 30’.In the M1 generation,the MEP had numerous phenotypical variations,such as>3,000 chlorophyll-deficient mutants,2,519 compact spikes,and 1,692 male sterile spikes.There were also rare mutations,including 30 independent tillers each with double heads.Some M1 variations of chlorophyll-deficiency and compact spikes were inheritable,appearing in the M2 or M3 generations.To advance the entire MEP to higher generations,we adopted a single-seed descendent(SSD)approach.All other seed composites of M2 were used to screen other agronomically important traits,such as the tolerance to herbicide quizalofop-P-methyl.The MEP is available for collaborative projects,and provides a valuable toolbox for wheat genetics and breeding for sustainable agriculture.

Sulfone通过转录因子Elk1调节人结肠癌细胞XAF1表达的研究

背景:Sulfone是一个高效的结肠肿瘤化学预防制剂,具有抗肿瘤功能,但其具体作用机制尚未完全明确。目的:探讨Sulfone在转录水平调节X连锁凋亡抑制蛋白(XIAP)相关因子1(XAF1)表达的作用机制。方法:以Sulfone干预人结肠癌细胞株HCT116,以蛋白质印迹法检测磷酸化ERK1/2(pERK1/2)、XAF1和ERK1/2表达;构建稳定转染pLuc-291质粒以及pLuc-291-18T、pLuc-291-70T、pLuc-291-IRFm质粒的HCT116细胞(分别为转录因子Elk1、c-ETS、IRF结合序列点突变),以荧光素酶报告基因检测Sulfone对XAF1启动子转录活性的调节作用;以染色质免疫沉淀法检测Elk1-XAF1的DNA结合活性;以实时定量PCR检测Elk1 siRNA对XAF1 mRNA表达的影响。结果:Sulfone可显著抑制pERK1/2表达,显著上调XAF1表达。XAF1启动子Elk1结合序列点突变能显著增加Sulfone诱导的XAF1启动子转录活性,而c-ETS和IRF结合序列点突变对Sulfone诱导的XAF1启动子转录活性无明显影响。XAF1启动子区域存在Elk1的特异性结合序列。以Elk1 siRNA抑制Elk1表达能显著增高XAF1mRNA表达。结论:Sulfone通过抑制ERK1/2信号通路下游转录因子Elk1活性,在转录水平上调人结肠癌细胞XAF1表达。

Sulfone通过抑制ERK途径上调XAF1表达诱导结肠癌细胞凋亡

目的:探讨化学预防药物Sulfone是否通过转录调节XAF1的表达诱导结肠癌细胞凋亡。方法:采用Hoechst 33258染色法检测人结肠癌细胞株HCT116(p53野生型)和SW480(p53突变型)经Sulfone处理后的细胞凋亡率。运用Western印迹法检测上述细胞经Sulfone处理前后XAF1、磷酸化ERK1/2(p-ERK1/2)和ERK1/2总蛋白质的表达量变化。通过双重荧光素酶报告基因检测Sulfone对XAF1启动子转录活性的调节作用。结果:Sulfone能诱导HCT116和SW480细胞凋亡,其效应随剂量的增加和时程的延长而更明显。Sulfone能有效抑制上述两种细胞中ERK1/2蛋白的磷酸化(抑制率分别为74%和57%,P<0.05),但上调XAF1蛋白的表达(2.2倍和3.1倍,P<0.05)。经Sulfone处理后,XAF1启动子的转录活性在HCT116和SW480细胞分别提高了3.3倍(P<0.01)和2.6倍(P<0.05)。结论:Sulfone通过抑制ERK途径,在转录水平显著上调XAF1的表达进而诱导细胞凋亡,且这种作用的强弱与肿瘤细胞的p53分型有关。

Synthesis and characterization of quaternized poly(phthalazinone ether sulfone ketone)for anion-exchange membrane

Chloromethylated poly（phthalazinone ether sulfone ketone） （CMPPESK） was prepared from poly（phthalazinone ether sulfone ketone） （PPESK） using chloromethyl octyl ethers （CMOE） with lower toxicity as chloromethylated regent. CMPPESK was soluble in N-methyl-2-pyrrolidone （NMP）, N,N-dimethylacetamide （DMAc） and chloroform. Quaternized poly（phthalazinone ether sulfone ketone） （QAPPESK） was prepared from CMPPESK by quaternization. QAPPESK had excellent solvent resistance, which was only partly soluble in sulfuric acid （98%） and swollen in N,N-dimethylformamide （DMF）. The vanadium redox flow battery （V-RFB） using QAPPESK anion-exchange membrane had better performance with 88.3% of overall energy efficiency.

Synthesis and characterization of novel poly(aryl ether sulfone ketone)s containing phthalazinone and biphenyl moieties

A novel series of poly（aryl ether sulfone ketone）s （PPESKs） containing phthalazinone and biphenyl moieties were prepared by two-step nucleophilic polycondensation reaction. The ^-Mw values of these copolymers were between 38,330 and 67,900. The glass transition temperatures （Tg） and 5% decomposition temperatures were ranged in 253-269 ℃ and 488-500 ℃, respectively, The structures of these copolymers were confirmed by FT-IR and ^1H NMR. Moreover, all the resultant copolymers were amorphous determined by wide angle X-ray diffraction （WAXD）.

THERMAL DEGRADATION OF POLY(ARYLENE SULFIDE SULFONE)/NMETHYLPYRROLIDONE CRYSTAL SOLVATE

The thermal degradation of poly（arylene sulfide sulfone）/N-methylpyrrolidone （PASS/NMP） crystal solvate was studied by thermogravimetric analysis （TGA） and was compared with pure PASS in order to determine the way in which the formation of the crystal solvate affected the thermal properties of the polymer. The activation energy of the solid state process was determined using Kissinger＇s method, which does not require knowledge of the reaction mechanism （RM）, to be 174.18 kJ/mol which was lower than that for pure PASS （E = 214 kJ/mol）. The study of master curves together with interpretation of integral methods, allows confirmation that the thermal degradation mechanism for PASS in the crystal solvate system is a decelerated Rn type, which is a solid-state process based on a phase boundary controlled reaction, in the conversion range considered. Whereas, the pure PASS follows a decelerated Dn thermodegradation mechanism in the same conversion range.

Allyl-containing Poly(aryl ether sulfone): Synthesis and Crosslinking

A novel type of crosslinkable poly（aryl ether sulfone）（PAES） bearing an allyl pendant（PES-OAllyl） was synthesized by a grafting reaction of hydrophenyl-containing PAES（PES-OH） and allyl bromide. PES-OH was prepared by a demethylation reaction of a methoxyphenylated PAES（PES-OCH3） in the presence of pyridine/hydrochlo- ride. The PES-OCH3 was synthesized by an aromatic nucleophilic substitution of bis（4-chlorophenyl）sulfone and （p-methoxy）phenylhydroquinone. Both DSC and solubility investigation were used to study the crosslinking behavior of PES-OAllyl. After heat treatment, the glass transition temperature（Tg） value of PES-OAllyl sharply increased from 165 ℃ to 227 ℃. Meanwhile, PES-OAllyl changed from a soluble polymer to an insoluble thermoset. In addition, TGA（thermogravimetric analysis） result suggests that the thermal stability of the crosslinked product was improved. All the data prove that the crosslinked PES-OAllyl could be a potential solvent-resistance high-performance material.

A novel method for the management of sulfone-rich waste produced in the oxidative desulfurization(ODS) process

The oxidative desulfurization(ODS) process is one of the new desulfurization processes for the production of clean fuels. Despite the benefits of the ODS process, this process faces several important challenges. One of the most important challenges of this process is the management of a waste which is rich of sulfone compounds.In the present study, a new strategy which is the addition of waste to the bitumen with other solid waste such as high density polyethylene(HDPE) waste has been investigated. The experimental design method was applied to investigate the effect of addition of the sulfone and HDPE wastes to the properties of the bitumen blends including degree of penetration, softening point, and mass loss. It was found that the sulfone waste can be added to the bitumen as a softener. The results showed that several grades of bitumen including 50/60, 60/70, 85/100 can be produced through the addition of sulfone waste along with the HDPE waste to the base 60/70 bitumen.In general, the application of simple processes such as mixing the wastes with the bitumen can reduce the cost of waste management, considerably.

Cyclic Oligomers of Phenolphthalein Polyarylene Ether Sulfone (Ketone): Preparation Through Cyclo-depolymerisation of Corresponding Polymers

Cyclic oligomers of phenolphthalein polyarylene ether sulfone(ketone) were prepared through cyclo-depolymerisation of corresponding polymers using CsF as the catalyst in dipolar aprotic solvent DMAc and DMF, and a family of macrocycles containing from dimer up to at least heptamer were confirmed by GPC, HPLC and MALDI-TOF-MS. The yields of cyclics get as high as 86.3% and 87.9% respectively.

Synthesis and Characterization of Ion-exchange Sulfonated Poly (ether sulfone)

N,N＇-Bis（3-hydroxyphenyl）-1,8,4,5-naphthalenetetracarboxylic bisimide was prepared from the reaction of 1,8,4,5-naphthalenetetrcarboxylic acid dianhydride and 2-aminophenol in N, N-dimethylformamide. Polymerization of this bisimide with 4,4＇-difluorodiphenylsulfone and disodium 3,3＇-disulfonate4,4＇-difluorodiphenylsulfone gave ion-exchange sulfonated poly（ether sulfone）. The structure of the title compound was characterized with H-NMR and its polymer was characterized with FT-IR.

α-AMIDOALKYLATION VIA SULFONES:TOWARDS THE SYNTHESIS OF ANT VENOM ALKALOIDS

Abstract: We described the synthesis of two 5-substituted γ-lactams Ⅰand Ⅱ by sulfone-baaed α-amidoalkylation method. This constitiutes the formal synthesis of ant venom alkaloids 2 and 3 in racemic form. The key intermediate 18 for the chiral synthesis of 2 and 3 was prepared from new chiral sulfone 7 by the same method.

A Stereoselective Synthesis of Substituted Allyl Alcohol by Threecomponent Rection of Acetylenic Sulfone,Phenylselenomagnesium Bromide and Ketones

Phenylseleno and sulfonyl substituted allyl alcohols were synthesized stereoselectively by the three-component reaction of acetylenic sulfone, phenylselenomagnesium bromide and ketones in one-pot.

The Rheological and Extrusion Behaviour of Blends Based on Phenolphthalein Poly(ether-ether-sulfone)and Thermotropic Liquid Crystalline Polymer

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｔｈｅｌａｓｔｔｗｏｄｅｃａｄｅｓ，ｐａｒｔｉｃｕｌａｒａｔｅｎｔｉｏｎｈａｓｂｅｅｎｄｅｖｏｔｅｄｔｏｕｓｉｎｇｔｈｅｔｈｅｒｍｏｔｒｏｐｉｃｌｉｑｕｉｄｃｒｙｓｔａｌｉｎｅｐｏｌｙｍｅｒｓ（ＴＬＣＰ）ａｓａｒｅｉｎｆｏ...

Synthesis and Crystal Structure of a Cyano-bridged Bimetallic Complex K_3(TMS)_2(H_2O)_2Cr(CN)_6[TMS = Tetramethylene Sulfone]

The cyano-bridged bimetallic complex K3(TMS)2(H2O)2Cr(CN)6 with three- dimensional microporous structure was synthesized and characterized. The title complex (C14H20CrK3N, Mr = 601.78) crystallizes in monoclinic, space group C2/c with a = 14.357(4), b = 9.331(3), c = 19.180(6) ?, β = 96.754(5)o, V = 2551.6(13) ?3, Z = 4, Dc = 1.567 g/m3, μ(MoKα) = 1.141 mm-1, F(000) = 1228, the final R = 0.0440 and wR = 0.0990 for 1760 observed reflections (I > 2σ(I)). In the crystal, two [Cr(CN) ]3- units, four K+ ions and two oxygen atoms of two 6 TMS molecules are linked to form a sixteen-membered ring and an extended three-dimensional structure.

Microwave-assisted synthesis of diaryl or aryl-alkyl sulfones without catalyst

The microwave-assisted coupling reaction of electrondeficient aryl halides with sulfinic acid salts through SNAr-based addition reactions within 5-30 min. No catalysts were required under our conditions.

A facile stereospecific synthesis of (Z)-2-sulfonyl-substituted 1,3-enynes via Sonogashira coupling of (E)-α-iodovinyl sulfones with 1-alkynes

（E）-α-Iodovinyl sulfones 1 underwent the Sonogashira coupling reactions with terminal alkynes 2 in piperidine at room temperature in the presence of 5 mol% of Pd（PPh3）4 and 10 mol% of CuI to stereospecifically afford the corresponding （Z）-2-sulfonyl-substituted 1,3-enynes 3 in high yields.

Quantitative Structure-chromatographic Retention Relationship for Polychlorinated Dibenzothiophenes and Their Corresponding Sulfones

Polychlorinated dibenzothiophenes(PCDTs)and their corresponding sulfone(PCDTO2)compounds are a group of important persistent organic pollutants.In the present study,geometrical optimization and subsequent calculations of electrostatic potentials(ESPs)on molecular surface have been performed for all 135 PCDTs and 135 PCDTO2 congeners at the HF/6-31G*level of theory.A number of statistically-based parameters have been extracted.Linear relationship between gas-chromatographic retention index(RI)and the structural descriptors have been established by multiple linear regression.The result shows that two descriptors derived from positive electrostatic potential on molecular surface,σ+^2 andπ,together with the molecular volume(Vmc)and the energy of the lowest unoccupied molecular orbital(ELUMO)can be well used to express the quantitative structure-retention relationship(QSRR)of PCDTs and PCDTO2.Predictive capability of the two models has been demonstrated by leave-one-out cross-validation with the cross-validated correlation coefficient(RCV)of 0.996 and 0.997,respectively.Furthermore,the predictive power of the models is further examined for the external test set.Correlation coefficients(R)between the observed and predicted RI values for the external test set are 0.997 and0.998,respectively,validating the robustness and good prediction of our model.The QSRR model established may provide again a powerful method for predicting chromatographic properties of aromatic organosulfur compounds.