The efficiency of sulfur capture of CaO, Ca（OH）2 and CaCO3 as well as the effect of CuO on them were studied. Results showed that the efficiency of sulfur capture of Ca（OH）2 is the highest among these three compou...The efficiency of sulfur capture of CaO, Ca（OH）2 and CaCO3 as well as the effect of CuO on them were studied. Results showed that the efficiency of sulfur capture of Ca（OH）2 is the highest among these three compounds. When CuO was used with each of CaO, Ca（OH）2 and CaCO3 at the same time, the efficiency of all of them would rise, and that of Ca（OH）2 raise most. The efficiency of sulfur capture of Ca（OH）2 with CuO is 14.4% higher than that without CuO.展开更多
The mechanisms of sulfur capturing during coal briquette combustion was discussed. Various factors affecting sulfur removal efficiency have been studied. Characterization of the slag left after combustion has been ca...The mechanisms of sulfur capturing during coal briquette combustion was discussed. Various factors affecting sulfur removal efficiency have been studied. Characterization of the slag left after combustion has been carried out by using X ray diffraction (XRD), Messbauer spectroscopy (MS), scanning electron microscopy (SEM), energy dispersion X ray analysis (EDAX), and electron spectroscopy for chemical analysis (ESCA). No other sulfur containing species besides CaSO 4 was found. Small amount of CaFe 3(SiO 4) 2OH, some complexes of CaO SiO 2 Fe 2O 3 and vitreous iron oxides were identified on the surface of CaSO 4 grains. This might explain the mechanism of sulfur fixation during coal briquettes combustion.展开更多
Sulfur dioxide(SO_(2))emissions from diesel exhaust pose a serious threat to the environment and human health.Thus,desulfurization technology and the performance of desulfurization materials must be improved.In this s...Sulfur dioxide(SO_(2))emissions from diesel exhaust pose a serious threat to the environment and human health.Thus,desulfurization technology and the performance of desulfurization materials must be improved.In this study,MnO_(2) was modified with various alkali metal ions using the impregnation method to enhance its SO_(2) capture performance.The composites were characterized intensively by scanning electron microscopy,energydispersive X-ray spectroscopy,X-ray diffraction spectroscopy,and Brunauer-Emmett-Teller theory.The SO_(2) capture performance of these composites were measured via thermogravimetry,and the effect of doping with alkali metal ions on the SO_(2) capture performance of MnO_(2) was investigated.Results showed that the SO_(2) capture performance of MnO_(2) could be enhanced by doping with alkali metal ions,and the MnO_(2) composite doped with LiOH(2.0 mol/L)had the best SO_(2) capture capacity(124 mgSO_(2)/gMaterial),which was 18%higher than that of pure MnO_(2).Moreover,the type and concentration of alkali metal ions had varying effects on the SO_(2) capture performance of MnO_(2).In our experiment,the SO_(2) capture performance of the MnO_(2) doped with NaOH,LiCl,Na2CO3,K2CO3,and Li2CO3 composites were worse than that of pure MnO_(2).Therefore,the influences of the type and concentration of alkali metal ions to be doped into desulfurization materials must be considered comprehensively.展开更多
CaSO4 is an attractive oxygen carrier for chemical looping combustion（CLC） because of its high oxygen capacity and low price. The utilization of a CaSO4 oxygen cartier suffers the problems of sulfur release, and dea...CaSO4 is an attractive oxygen carrier for chemical looping combustion（CLC） because of its high oxygen capacity and low price. The utilization of a CaSO4 oxygen cartier suffers the problems of sulfur release, and deacti- vation caused by sulfur loss. With respect to the fact that partial sulfur release could be recaptured and then recycled to CaSO4 by CaO sorbent, the mixture of CaSO4-CaO can be treated as an oxygen carrier. Thermodynamics of CaSO4 and CaSO4-CaO reduction by CO have been investigated in this study. The sulfur migrations, including the sulfur migration from CaSO4 to gas phase, mutual transformation of sulfur-derived gases and sulfur migration from gas phase to solid phase, were focused and elucidated. The results show that the releases of S2, S8, COS and CS2 from CaSO4 oxygen carrier are spontaneous, while SO2 can be released at high reaction temperatures above 884 ℃. SO2 is the major emission source of sulfur at low CO/CaSO4 molar ratios, and COS is the major part of the byproducts as soon as the ratio exceeds 4 at 900℃. Under CO atmosphere, all the sulfur-derived gases, SO2, S2, S8 and CS2, involved are thermodynamically favored to be converted into COS substance, and are spontaneously absorbed and solidified by CaO additive just into CaS species, which may be recycled to CaSO4 as oxygen carrier in the air reactor. But high reaction temperatures and high CO2 concentrations are adverse to sulfur capture.展开更多
文摘The efficiency of sulfur capture of CaO, Ca（OH）2 and CaCO3 as well as the effect of CuO on them were studied. Results showed that the efficiency of sulfur capture of Ca（OH）2 is the highest among these three compounds. When CuO was used with each of CaO, Ca（OH）2 and CaCO3 at the same time, the efficiency of all of them would rise, and that of Ca（OH）2 raise most. The efficiency of sulfur capture of Ca（OH）2 with CuO is 14.4% higher than that without CuO.
文摘The mechanisms of sulfur capturing during coal briquette combustion was discussed. Various factors affecting sulfur removal efficiency have been studied. Characterization of the slag left after combustion has been carried out by using X ray diffraction (XRD), Messbauer spectroscopy (MS), scanning electron microscopy (SEM), energy dispersion X ray analysis (EDAX), and electron spectroscopy for chemical analysis (ESCA). No other sulfur containing species besides CaSO 4 was found. Small amount of CaFe 3(SiO 4) 2OH, some complexes of CaO SiO 2 Fe 2O 3 and vitreous iron oxides were identified on the surface of CaSO 4 grains. This might explain the mechanism of sulfur fixation during coal briquettes combustion.
基金This work was financially supported by the Key Program of Frontier Science of Chinese Academy of Sciences(QYZDY-SSW-JSC038)the Natural Science Foundation of Guangdong Province(2017A030310185)the Science and Technology Planning Project of Guangzhou,China(201704030040).
文摘Sulfur dioxide(SO_(2))emissions from diesel exhaust pose a serious threat to the environment and human health.Thus,desulfurization technology and the performance of desulfurization materials must be improved.In this study,MnO_(2) was modified with various alkali metal ions using the impregnation method to enhance its SO_(2) capture performance.The composites were characterized intensively by scanning electron microscopy,energydispersive X-ray spectroscopy,X-ray diffraction spectroscopy,and Brunauer-Emmett-Teller theory.The SO_(2) capture performance of these composites were measured via thermogravimetry,and the effect of doping with alkali metal ions on the SO_(2) capture performance of MnO_(2) was investigated.Results showed that the SO_(2) capture performance of MnO_(2) could be enhanced by doping with alkali metal ions,and the MnO_(2) composite doped with LiOH(2.0 mol/L)had the best SO_(2) capture capacity(124 mgSO_(2)/gMaterial),which was 18%higher than that of pure MnO_(2).Moreover,the type and concentration of alkali metal ions had varying effects on the SO_(2) capture performance of MnO_(2).In our experiment,the SO_(2) capture performance of the MnO_(2) doped with NaOH,LiCl,Na2CO3,K2CO3,and Li2CO3 composites were worse than that of pure MnO_(2).Therefore,the influences of the type and concentration of alkali metal ions to be doped into desulfurization materials must be considered comprehensively.
基金Supported by the National Natural Science Foundation of China（Nos.51306084, 51374004）, the Scientific and Technological Leading Talent Projects in Yuunan Province, China（No.2015HA019） and the Natural Science Foundation of Kunming University of Science and Technology, China（No.KKZ3201352030）.
文摘CaSO4 is an attractive oxygen carrier for chemical looping combustion（CLC） because of its high oxygen capacity and low price. The utilization of a CaSO4 oxygen cartier suffers the problems of sulfur release, and deacti- vation caused by sulfur loss. With respect to the fact that partial sulfur release could be recaptured and then recycled to CaSO4 by CaO sorbent, the mixture of CaSO4-CaO can be treated as an oxygen carrier. Thermodynamics of CaSO4 and CaSO4-CaO reduction by CO have been investigated in this study. The sulfur migrations, including the sulfur migration from CaSO4 to gas phase, mutual transformation of sulfur-derived gases and sulfur migration from gas phase to solid phase, were focused and elucidated. The results show that the releases of S2, S8, COS and CS2 from CaSO4 oxygen carrier are spontaneous, while SO2 can be released at high reaction temperatures above 884 ℃. SO2 is the major emission source of sulfur at low CO/CaSO4 molar ratios, and COS is the major part of the byproducts as soon as the ratio exceeds 4 at 900℃. Under CO atmosphere, all the sulfur-derived gases, SO2, S2, S8 and CS2, involved are thermodynamically favored to be converted into COS substance, and are spontaneously absorbed and solidified by CaO additive just into CaS species, which may be recycled to CaSO4 as oxygen carrier in the air reactor. But high reaction temperatures and high CO2 concentrations are adverse to sulfur capture.
