The thermal dissolved sulfuration technology is brought forward and performed based on the characteristic of low grade lead-zinc oxide ore in lanpin. Using sulfur as the sulphidizing agent in the experiment, the oxide...The thermal dissolved sulfuration technology is brought forward and performed based on the characteristic of low grade lead-zinc oxide ore in lanpin. Using sulfur as the sulphidizing agent in the experiment, the oxides in the sandstone and ignimbrite are changed into sulfides. The disproportionation reaction of sulfur in a solution is confirmed as 4S＋3H2O=2S^2-＋S2O3^2--＋6H^＋. The dynamics process is studied and the first-order reaction rate equation -1n（1-a）=ktt is obtained. The effects of the reactive products, stirring speed, dosage of sulfuration agent, value of pH and sulphidizing temperature on the sulfuration of oxide ore are investigated. The results indicate that the reactive apparent activation energy is 100.8 kJ/mol and the sulfuration ratio of lead-zinc oxide ore reaches 60% under the conditions of pH 5.9-7.5, the sulfuration temperature of 130 ℃, sulfuration time of 180 min and the stirring speed of 800 r/min.展开更多
Bulk sulfur incorporating 3 wt% gold nano-powder is investigated as possible candidate to maximize the fraction of active material in the Li-S battery cathode.The material is prepared via simple mixing of gold with mo...Bulk sulfur incorporating 3 wt% gold nano-powder is investigated as possible candidate to maximize the fraction of active material in the Li-S battery cathode.The material is prepared via simple mixing of gold with molten sulfur at 120℃,quenching at room temperature,and grinding.Our comprehensive study reports relevant electrochemical data,advanced X-ray computed tomography(CT)imaging of the positive and negative electrodes,and a thorough structural and morphological characterization of the S:Au 97:3 w/w composite.This cathode exhibits high rate capability within the range from C/10 to 1C,a maximum capacity above 1300 mAh gs^(-1),and capacity retention between 85%and 91%after 100 cycles at 1C and C/3 rates.The novel formulation enables a sulfur fraction in the composite cathode film as high as 78 wt%,an active material loading of 5.7 mg cm^(-2),and an electrolyte/sulfur(E/S)ratio of 5μL mg^(-1),which lead to a maximum areal capacity of 5.4 mAh cm^(-2).X-ray CT at the micro-and nanoscale reveals the microstructural features of the positive electrode that favor fast conversion kinetics in the battery.Quantitative analysis of sulfur distribution in the porous cathode displays that electrodeposition during the initial cycle may trigger an activation process in the cell leading to improved performance.Furthermore,the tomography study reveals the characteristics of the lithium anode and the cell separator upon a galvanostatic test prolonged over 300 cycles at a 2C rate.展开更多
Thiobacillus denitrificans, a kind of autotrophic facultative bacteria, can oxidize sulfide into elemental sulfur or sulfate when nitrate was adopted as its electron accepter and carbon dioxide as its carbon resource ...Thiobacillus denitrificans, a kind of autotrophic facultative bacteria, can oxidize sulfide into elemental sulfur or sulfate when nitrate was adopted as its electron accepter and carbon dioxide as its carbon resource under anoxic or anaerobic environment. In this way, nitrate is converted into nitrogen. In addition, Thiobacillus denitrificans can accumulate sulfur extracellularly. In this study, in a process of simultaneous desulfurization and denitrification, a strain of Thiobacillus denitrificans is employed as sulfur-producer in the treatment of wastewater containing sulfide and nitrate. The key factors affecting this process are investigated through batch tests. The experimental results indicate that the sulfide concentration and the ratio of sulfide to nitrate (S^2-/NO3^-) in the influent are the key factors, and their suitable values are suggested to be 5/3 and no more than 300mg·L^-1, respectively, in order to achieve high conversion of sulfur.展开更多
基金supported by Cooperated Project of Academy and College Yunnan province(2003CBALA02P023)
文摘The thermal dissolved sulfuration technology is brought forward and performed based on the characteristic of low grade lead-zinc oxide ore in lanpin. Using sulfur as the sulphidizing agent in the experiment, the oxides in the sandstone and ignimbrite are changed into sulfides. The disproportionation reaction of sulfur in a solution is confirmed as 4S＋3H2O=2S^2-＋S2O3^2--＋6H^＋. The dynamics process is studied and the first-order reaction rate equation -1n（1-a）=ktt is obtained. The effects of the reactive products, stirring speed, dosage of sulfuration agent, value of pH and sulphidizing temperature on the sulfuration of oxide ore are investigated. The results indicate that the reactive apparent activation energy is 100.8 kJ/mol and the sulfuration ratio of lead-zinc oxide ore reaches 60% under the conditions of pH 5.9-7.5, the sulfuration temperature of 130 ℃, sulfuration time of 180 min and the stirring speed of 800 r/min.
基金supported by the grant “Fondo di Ateneo per la Ricerca Locale (FAR) 2019”, University of Ferraraperformed within the collaboration project “Accordo di Collaborazione Quadro 2015” between University of Ferrara (Department of Chemical and Pharmaceutical Sciences) and Sapienza University of Rome (Department of Chemistry)+2 种基金funding from The Faraday Institution LiSTAR programme (EP/ S003053/1, FIRG014)supported by funding from EPSRC (EP/K005030/1)the support of The Royal Academy of Engineering (CiET1718/59)。
文摘Bulk sulfur incorporating 3 wt% gold nano-powder is investigated as possible candidate to maximize the fraction of active material in the Li-S battery cathode.The material is prepared via simple mixing of gold with molten sulfur at 120℃,quenching at room temperature,and grinding.Our comprehensive study reports relevant electrochemical data,advanced X-ray computed tomography(CT)imaging of the positive and negative electrodes,and a thorough structural and morphological characterization of the S:Au 97:3 w/w composite.This cathode exhibits high rate capability within the range from C/10 to 1C,a maximum capacity above 1300 mAh gs^(-1),and capacity retention between 85%and 91%after 100 cycles at 1C and C/3 rates.The novel formulation enables a sulfur fraction in the composite cathode film as high as 78 wt%,an active material loading of 5.7 mg cm^(-2),and an electrolyte/sulfur(E/S)ratio of 5μL mg^(-1),which lead to a maximum areal capacity of 5.4 mAh cm^(-2).X-ray CT at the micro-and nanoscale reveals the microstructural features of the positive electrode that favor fast conversion kinetics in the battery.Quantitative analysis of sulfur distribution in the porous cathode displays that electrodeposition during the initial cycle may trigger an activation process in the cell leading to improved performance.Furthermore,the tomography study reveals the characteristics of the lithium anode and the cell separator upon a galvanostatic test prolonged over 300 cycles at a 2C rate.
基金Supported by the National Natural Science Foundation of China (No. 50208006).
文摘Thiobacillus denitrificans, a kind of autotrophic facultative bacteria, can oxidize sulfide into elemental sulfur or sulfate when nitrate was adopted as its electron accepter and carbon dioxide as its carbon resource under anoxic or anaerobic environment. In this way, nitrate is converted into nitrogen. In addition, Thiobacillus denitrificans can accumulate sulfur extracellularly. In this study, in a process of simultaneous desulfurization and denitrification, a strain of Thiobacillus denitrificans is employed as sulfur-producer in the treatment of wastewater containing sulfide and nitrate. The key factors affecting this process are investigated through batch tests. The experimental results indicate that the sulfide concentration and the ratio of sulfide to nitrate (S^2-/NO3^-) in the influent are the key factors, and their suitable values are suggested to be 5/3 and no more than 300mg·L^-1, respectively, in order to achieve high conversion of sulfur.
