Sulfur phase and sulfur removal in high sulfur-containing bauxite

The sulfur phase in high sulfur-containing bauxite was studied by an X-ray diffraction analysis and a chemistry quantitative analysis.The methods for the removal of different shaped sulfur were also discussed.The results show that sulfur phases in high sulfur-containing bauxites exist in the main form of sulfide sulfur （pyrite） or sulfate sulfur,and the main sulfur forms of bauxites from different regions are not the same.Through a combination of an X-ray diffraction analysis and a chemistry quantitative analysis,the sulfur phases of high sulfur-containing bauxite could be accurately investigated.Deciding the main sulfur form of high sulfur-containing bauxite could provide theoretical instruction for choosing methods for the removal of sulfur from bauxite,and an oxidizing-roasting process is an effective way to remove sulfide sulfur from high sulfur-containing bauxite,the content of S^2-in crude ore in the digestion liquor is above 1.7 g/L,but in the roasted ore digestion liquor,it is below 0.18 g/L.Using the sodium carbonate solution washing technology to wash bauxite can effectively remove sulfate sulfur,the content of the total sulfur in ore is lowered to below 0.2% and can meet the production requirements for the sulfur content.

Highly Efficient and Selective Removal of Pb（II） ions by Sulfur-Containing Calcium Phosphate Nanoparticles

A facile one-step co-precipitation method was demonstrated to fabricate amorphous sulfurcontaining calcium phosphate （SCP） nanoparticles, in which the sulfur group was in-situ introduced into calcium phosphate. The resulting SCP exhibited a noticeable enhanced performance for Pb（II） removal in comparison with hydroxyapatite （HAP）, being capable of easily reducing 20 ppm of Pb（II） to below the acceptable standard for drinking water within less than 10 min. Remarkably, the saturated removal capacities of Pb（II） on SCP were as high as 1720.57 mg/g calculated by the Langmuir isotherm model, exceeding largely that of the previously reported absorbents. Significantly, SCP displayed highly selective removal ability toward Pb（II） ions in the presence of the competing metal ions （Ni（II）, Co（II）, Zn（II）, and Cd（II））. Further investigations indicated that such ultra-high removal efficiency and preferable affinity of Pb（II） ions on SCP may be reasonably ascribed to the formation of rodlike hydroxypyromorphite crystals on the surface of SCP via dissolution-precipitation and ion exchange reactions, accompanied by the presence of lead sulfide precipitates. High removal efficiency, fast removal kinetics and excellent selectivity toward Pb（II） made the obtained SCP material an ideal candidate for Pb（II） ions decontamination in practical application.

A review of gold extraction using noncyanide lixiviants: Fundamentals, advancements, and challenges toward alkaline sulfur-containing leaching agents

Alkaline sulfur-containing lixiviants,including thiosulfate,polysulfides,and alkaline sulfide solutions,stand out as a promising class of alternatives to cyanide because of their low toxicity,high efficiency,and strong adaptability.In this paper,we summarized the research progress and remaining challenges in gold extraction using these noncyanide reagents.After a brief introduction to the preparation method,the transformation process of various sulfur-containing species in alkaline solutions was discussed.Thereafter,some insights into the mechanism of gold leaching in alkaline sulfur-containing solutions were presented from different aspects,including thermodynamics analysis,electrochemical dissolution,and leaching kinetics.Moreover,recent progress in in-situ generation of sulfur-containing anions from gold-bearing sulfide minerals was outlined as well.Gold passivation caused by sulfur species was discussed in particular because it is considered the greatest challenge facing sulfur-containing leaching systems.Alkaline sulfur-containing lixiviants are expected to serve as alternatives in industrial applications of gold extraction,particularly for refractory gold ores containing copper and carbonaceous matter.

pH variation mechanism of high sulfur-containing bauxite

In order to fundamentally solve the acidification problem of high sulfur-containing bauxite during storage, by simulating the environment of minerals storage in laboratory, the acidification mechanism and influencing factors of high sulfur-containing bauxite were studied and confirmed using the single variable method to control the atmosphere, water and other variables. The results show that the acidification is mostly caused by the oxidation of sulfur-containing bauxite, which is mainly the natural oxidation of Pyrite(Fe S2), then the alkaline minerals dissolute in the presence of water, leading to the acidification phenomenon, which is influenced by moisture and air flow. Finally, more acid-producing substances are formed, resulting in the acidification of high sulfur-containing bauxite. The acidification of high sulfur-containing bauxite results from the combined effect of the oxygen in the air and water, which can be significantly alleviated by controlling the diffusion of the oxygen in air.

Synthesis and Characterization of New Schiff Bases Formed by Condensation of 2,9-Phenathroline-1,10-dialdehyde with Sulfur-Containing Amines

Four new Schiff bases of 1,10-phenanthroline-2,9-dicarboxaldehyde with sulfur-containing amines such as 2-mercaptoaniline, S-alkyl/aryl dithiocarbazates and thiosemicarbazide have been synthesized and characterized by spectroscopic and X-ray crystallographic techniques. A comparative study of the methods of synthesis has been made using both traditional and microwave techniques. A significant reduction in reaction time has been observed when the microwave method was used. In some of the reactions, the yields also increased significantly.

QSPR Study on the Boiling Points of Some Oxygenand Sulfur-containing Organic Compounds

Structural and thermodynamic parameters of 56 oxygen-containing and 56 sulfur- containing organic compounds were computed at the B3LPY/6-311G＊＊ level using density functional theory （DFT） method. Furthermore,the dependent equations between the experimental data of boiling points （Tb） and theoretical parameters were proposed with SPSS12.0 for windows software,whose correlation coefficients R2 are 0.933 and 0.945. These dependent equations were validated by cross-validation method （q2 are 0.923 and 0.929,respectively）. VIF （variance inflation factors） and t-value methods were also used to verify the significance and self-correlationship of each variable. Results indicate that our dependent equation exhibits good prediction ability,and molecular polarizability （α） is the main factor affecting the Tb of oxygen- and sulfur-containing organic compounds. To our interest,obvious dependence could also be found among the oxygen- and sulfur-containing organic compounds＇ experimental data of boiling points （Tb） with R^2 of 0.857.

Catalytic kinetics of dimethyl ether one-step synthesis over CeO_2–CaO–Pd/HZSM-5 catalyst in sulfur-containing syngas process

CeO_2–CaO–Pd/HZSM-5 catalyst was prepared for the dimethyl ether(DME) one-step synthesis in a continuous fixed-bed micro-reactor from the sulfur-containing syngas. The catalytic stability over hybrid catalyst of CeO_2–CaO–Pd/HZSM-5 was investigated to ensure that the kinetics experimental results were not significantly influenced by induction period and catalytic deactivation. A large number of kinetic data points(40 sets) were obtained over a range of temperature(240–300 °C), pressure(3–4 MPa), gas hourly space velocity(GHSV)(2000–3000 L·kg^(-1)·h^(-1)) and H_2/CO mole ratio(2–3). Kinetic model for the methanol synthesis reaction and the dehydration of methanol were obtained separately according to reaction mechanism and Langmuir–Hinshelwood mechanism. Regression parameters were investigated by the method combining the simplex method and Runge–Kutta method. The model calculations were in appropriate accordance with the experimental data.

An Innovative Method for the Determination of Sulfur-containing Compounds by Vapor Molecular Absorption Spectrometry

Since the most sensitive resonance lines of nonmetallic elements are situated in vacuum ultraviolet region （below 190 nm）, they can not be directly determined with a common AAS instrument covering the spectral range from 190 to 700 nm. The molecular absorption spectrometry is often used for the determination of nonmetallic elements. Syty et al. used vapor molecular absorption spectrometry（VMAS） to determine the sulfur dioxide and sulfide, in which a hydrogen hollow cathode lamp was used as a continuum source to determine SO;at 210 nm and a deuterium arc

The Synthesis of New Sulfur-containing Chiral Macrocyclic Ligands

Five new chiral sulfur-containing macrocyclic ligands which can be used in chiral recognition to guests have been synthesized and characterized

Comparison of the capacity of biological desulfurization of Thiobacillus ferrooxidans from different sulfur-containing substrates with or without additional ferrous iron

Thiobacillus ferrooxidans,abbreviated as T.ferrooxidans is one of the important microorganisms in the field of biological desulfurization.Effects of ferrous iron and sulfur-containing substrates on biological desulfurization of T.ferrooxidans were studied.Results show that in the absence of Fe^(2+),T.ferrooxidans can utilize three kinds of sulfur-containing substrates of Na_(2)S_(2)O_(3),elemental S and Na_(2)SO_(3) for growth and metabolism.For utilization complexity,Na_(2)S_(2)O_(3) was easiest to use,next was elemental S,and Na_(2)SO_(3) was the worst for use.During the utilization of ferrous iron and sulfur-containing substrates by T.ferrooxidans,the iron oxidation system was first started.With the decrease of the Fe^(2+)concentration,the sulfur oxidation system was started,and then the two systems synergistically acted.The presence of three sulfur-containing substrates had different effects on Fe^(2+)oxidation,and elemental S did not inhibit the oxidation of Fe^(2+),while Na_(2)S_(2)O_(3) and Na_(2)SO_(3) had some inhibition on the oxidation of Fe^(2+),especially the inhibition of Na_(2)SO_(3) was significant,and complete oxidation of ferrous iron needed more time.The isolated T.ferrooxidans is applied to the removal of H2S gas,aiming to provide a new technological approach for biological removal of H2S.

脱硫废液半干法制酸在云煤中的应用

介绍了云南煤业能源股份有限公司200万t/a焦化环保搬迁转型升级项目,采用半干法制酸工艺,利用硫泡沫和脱硫废液经过过滤和浓缩处理,制备液态硫黄和含硫废液,并通过“3+1”两转两吸工艺生产浓硫酸。该项目包括预处理、焚烧、净化、干吸、转化和尾吸六个工序。同时,经过净化的副产品稀硫酸生产量应不超过每吨浓硫酸0.2 t。

高浓度化工废液流化床焚烧炉的研制与应用

介绍了高浓度废液流化床焚烧炉的工作原理和结构，对流化床焚烧炉的设计以及为提高废液焚烧效率和辅助燃料利用率、防止二次污染所采用的关键技术进行了探讨和分析。该流化床焚烧炉具有废液焚烧彻底、环保性能优良、运行费用低廉等显著优点。

化学镀镍废液再生利用工艺研究

化学镀镍废液因含有大量的亚磷酸盐而报废。本实验采用沉淀法加入可溶性钙去除废液中的亚磷酸盐和硫酸盐;之后加入可溶性氟化物以去除溶液中残余的钙离子。处理后的溶液补充硫酸镍和亚磷酸盐得到再生工作液,再分别用于对铁基体和铝基体施镀,所得镀件的效果良好。

Sulfur-containing amino acid methionine as the precursor of volatile organic sulfur compounds in algea-induced black bloom

After the application of methionine, a progressive and significant increase occurred in five volatile organic sulfur compounds （VOSCs）： methanethiol （MESH）, dimethyl sulfide （DMS）, dime^yl disulfide （DMDS）, dimethyl trisulfide （DMTS） and dimethyl tetrasulfide （DMTeS）. Even in the untreated control without a methionine addition, methionine and its catabolites （VOSCs, mainly DMDS） were found in considerable amounts that were high enough to account for the water＇s offensive odor. However, blackening only occurred in two methionine-amended treatments. The VOSCs production was observed to precede black color development, and the reaching of a peak value for total VOSCs was often followed by water blackening. The presence of glucose stimulated the degradation of methionine while postponing the occurrence of the black color and inhibiting the production of VOSCs. In addition, DMDS was found to be the most abundant species produced after the addition of methionine alone, and DMTeS appeared to be the most important compound produced after the addition of methionine＋glucose. These results suggest that methionine acted as an important precursor of the VOSCs in lakes suffering from algea-induced black bloom. The existence of glucose may change the transformation pathway of methionine into VOSCs to form larger molecular weight compounds, such as DMTS and DMTeS.

混合电镀废液综合利用生产铬黄的研究

介绍了以Ｎａ２ＣＯ３为沉淀剂，去除电镀废液中除铬Ｃｒ６＋以外的金属离子，然后用净化后的电镀废液生产铅铬黄的方法．

Sulfur-containing compounds as electrolyte additives for lithium-ion batteries

Originating from“rocking-chair concept”,lithium-ion batteries(LIBs)have become one of the most important electrochemical energy storage technolo-gies,which have largely impacted our daily life.The utilization of electrolyte additives in small quantities(≤5%by wt or vol)has been long viewed as an economical and efficient approach to regulate the properties of electrolyte and electrode–electrolyte interphases and consequently improve the cycling perfor-mance of LIBs.Among all the kinds of electrolyte additives,sulfur-containing compounds have gained significant attention due to their unique features in building stable electrode–electrolyte interphases and protect battery cells from overcharging.In this work,advances and progresses of sulfur-containing addi-tives used in LIBs are overviewed,with special attention paid to the working mechanisms of these electrolyte additives.Particularly,four representative sulfur-containing compounds(i.e.,1,3-propane sultone,prop-1-ene-1,3-sultone,1,3,2-dioxathiolane-2,2-dioxide,and ethylene sulfite)are comparatively dis-cussed concerning their impact on electrode–electrolyte interphases and cell per-formances.Future work on the development of sulfur-containing compounds as functional electrolyte additives is also provided.The present review is antici-pated to be not only a base document to access the status quo in this research domain but also a guideline to select specialized additives and electrolytes for practical applications.

Determination of sulfur anions by ion chromatography-postcolumn derivation and UV detection

A novel method for determination of formaldehyde sulfoxylate, sulfite, thiocyanate, and thiosulfate in foodstuffs by ion chromatography separation with postcolumn derivation and UV detection has been developed. All species are separated at Dionex IonPac AG22A and AS22A with mobile phase of a mixture of 4.5 mmol/L sodium carbonate and 0.8 mmol/L sodium bicarbonate at a flow-rate of 1.0 mL/min. The postcolunm derivation solution was 0.24% iodine in 0.2% phosphate acid and the detection wavelength was set at 288 nm. The detection limits （LOD, signal-to-noise ratio of 3） of formaldehyde sulfoxylate, sulfite, thiocyanate, and thiosulfate were 0.004, 0.006, 0.006, and 0.007 mg/L, respectively. Within-day relative standard deviations （RSD, n = 10） of formaldehyde sulfoxylate, sulflte, thiocyanate, and thiosulfate were 3.24%, 3.76%, 2.68%, and 2.07%, respectively. The recoveries of the four anions were in the range of 67.2-116.5%.

Conversion and reaction kinetics of coke oven gas over a commercial Fe-Mo/Al_2O_3 catalyst

Producing methanol from coke oven gas(COG) is one of the important applications of COG. Removal of sulfur from COG is a key step of this process. Conversion and reaction kinetics over a commercial Fe-Mo/Al2O3 catalyst(T-202) were studied in a continuous flow fixed bed reactor under pressures of 1.6-2.8 MPa, space time of 1.32-3.55 s and temperatures of 240-360 °C. Though the COG contains about 0.6 mol/mol H2, hydrogenation of CO and CO2 is not significant on this catalyst. The conversions of unsaturated hydrocarbons depend on their molecular structures. Diolefins and alkynes can be completely hydrogenated even at relatively low temperature and pressure. Olefins, in contrast, can only be progressively hydrogenated with increasing temperature and pressure. The hydrodesulfurization(HDS) of CS2 on this catalyst is easy. Complete conversion of CS2 was observed in the whole range of the conditions used in this work. The original COS in the COG can also be easily converted to a low level. However, its complete HDS is difficult due to the relatively high concentration of CO in the COG and due to the limitation of thermodynamics. H2 S can react with unsaturated hydrocarbons to form ethyl mercaptan and thiophene, which are then progressively hydrodesulfurized with increasing temperature and pressure. Based on the experimental observations, reaction kinetic models for the conversion of ethylene and sulfur-containing compounds were proposed; the values of the parameters in the models were obtained by regression of the experimental data.

Recent advances in the application of sulfinic acids for the construction of sulfur-containing compounds

Sulfur-containing organic compounds display wide applications in the field of materials science,synthetic chemistry,and pharmaceutical industry.Thus,numerous synthetic strategies have been developed for the synthesis of sulfur-containing compounds in synthetic chemistry.In recent years,the utilization of sulfinic acids as versatile synthons has emerged as attractive and powerful approach to access various organosulfur compounds through sulfonylation,sulfinylation or sulfenylation reactions.In this review,we summarized the recent progress in the construction of various sulfur-containing compounds from sulfininc acids.Selected examples of substrates and the related reaction mechanisms are described here.This review intends to provide readers a comprehensive understanding on the synthesis of sulfur-containing molecules from sulfinic acids and provide help for future synthetic research.

The intriguing chemistry and biology of sulfur-containing natural products from marine microorganisms(1987-2020)

Natural products derived from marine microorganisms have received great attention as a potential resource of new compound entities for drug discovery.The unique marine environment brings us a large group of sulfur-containing natural products with abundant biological functionality including antitumor,antibiotic,anti-inflammatory and antiviral activities.We reviewed all the 484 sulfur-containing natural products(non-sulfated)isolated from marine microorganisms,of which 59.9%are thioethers,29.8%are thiazole/thiazoline-containing compounds and 10.3%are sulfoxides,sulfones,thioesters and many others.A selection of 133 compounds was further discussed on their structure-activity relationships,mechanisms of action,biosynthesis,and druggability.This is the first systematic review on sulfur-containing natural products from marine microorganisms conducted from January 1987,when the first one was reported,to December 2020.