In order to improve the wear resistance properties of copper substrate, a layer of electroplated nickel was firstly deposited on copper substrate, subsequently these electroplated specimens were treated by slurry pack...In order to improve the wear resistance properties of copper substrate, a layer of electroplated nickel was firstly deposited on copper substrate, subsequently these electroplated specimens were treated by slurry pack cementation process with a slurry pack cementation mixture composed of TiO2 as titanizing source, pure Al powder as aluminzing source and also a reducer for titanizing, an activator of NH4Cl and albumen （egg white） as cohesive agent. The Ti-Al coating was fabricated on the surface of electro-deposited nickel layer on copper matrix followed by the slurry pack cementation process. The effects of slurry pack cementation temperature on the microstructures and wear resistance of Ti-Al coating were studied. The results show that the microstructure of the coating changed from NiAl＋Ni3（Ti,Al） to NiAl ＋Ni3（Ti,Al）＋Ni4Ti3 to Ni4Ti3＋NiAl, and to NiAl＋Ni3（Ti,Al）＋NiTi with slurry pack cementation temperature ranging from 800 ℃ to 950 ℃ in 12 h. The friction coefficient of Ti-Al coating decreased and the hardness increased with increasing the slurry pack cementation temperature. The minimum friction coefficient was 1/3 and the minimum hardness was 5 times larger than that of pure copper.展开更多
In order to study the effect of electromagnetic compound treatment on the mechanical property, cutting performance and microstructure of cemented carbide, the samples were treated by a self-made electromagnetic compou...In order to study the effect of electromagnetic compound treatment on the mechanical property, cutting performance and microstructure of cemented carbide, the samples were treated by a self-made electromagnetic compound treatment device with different magnetic field strength(H=1, 1.25 and 1.5 T). The electromagnetic compound treatment method was proposed to couple pulsed magnetic field and pulsed current. The results show that after the pulsed magnetic field treatment, the values of the transverse rupture strength of the samples were respectively reduced by 21%, 20.6% and 20.1%;the cutting performance was decreased by about 4.5%, which means the tool life was decreased. After the electromagnetic compound treatment, the values of the transverse rupture strength of the rectangular samples were respectively increased by 8%, 8.6% and 9.5%, and the tool life was increased by 4.2%, 7% and 10.3%. After the electromagnetic compound treatment, the pulse current provided the driving force for dislocation motion. A strong pulse current driving force is more likely to make the dislocation multiply and slip. A high density dislocation cell is formed within the material, so the mechanical properties were significantly increased.展开更多
The morphology,structure and distribution of the rare earth compounds in the YG8R.YT5R and YT14R cemented carbides with additions of trace light rare earths were studied with an analytical electron microscope. The par...The morphology,structure and distribution of the rare earth compounds in the YG8R.YT5R and YT14R cemented carbides with additions of trace light rare earths were studied with an analytical electron microscope. The particles of the rare earth compounds in these alloys are all spherical and distribute at interfaces between the Co-cement phase and WC hard phase or(TiW)C solid solution,and in the(TiW)C solid solution.In the YG8R and YTI4R alloys,the rare earth compound is RE_2O_3 with a bcc structure,while in the YT5R alloy. the rare earth compound is RE_2O_2S with a hcp structure.展开更多
To study the formation process of feldspathic sandstone and sand compound soil in the Mu Us Desert,1∶ 1,1∶ 2 and 1∶ 5 ratios of feldspathic sandstone and sand were mixed to obtain compound soil to plant crops,and a...To study the formation process of feldspathic sandstone and sand compound soil in the Mu Us Desert,1∶ 1,1∶ 2 and 1∶ 5 ratios of feldspathic sandstone and sand were mixed to obtain compound soil to plant crops,and analyze the rules of changes in water-stable aggregates of the compound soil among the 4 years crops growing process. The results showed,before crop planting,the order of mass percent of> 0. 25 mm and 0. 25-2. 00 mm water-stable aggregates in three kinds of compound soil was 1∶ 1 > 1∶ 2 > 1∶ 5,showing that the overall content was low; the mass percent of > 0. 25 mm water-stable aggregates remained at 18. 38%-28. 22%; the mass percent of 0. 25-0. 50 mm,0. 50-2. 00 mm,2. 00-5. 00 mm,and > 5. 00 mm water-stable aggregates was close with each other in each kind of compound soil. After4 years of planting,the mass percent of > 0. 25 mm water-stable aggregates in 1∶ 2 compound soil increased significantly and exceeded other2 kinds of compound soil,reached 32. 34%; the main components of > 0. 25 mm water stable aggregates in 1∶ 1,1∶ 2,and 1∶ 5 compound soil were 0. 25-0. 50 mm( 53. 54%),0. 25-0. 50 mm( 59. 43%),0. 05-2. 00 mm( 52. 16%),aggregates; 0. 25-2. 00 mm aggregates increased significantly in all three kinds of compound soil,with the highest increase in 1∶ 2 compound soil; the organic matters of 1∶ 2 compound soil were significantly correlated with 0. 25-0. 50 mm and 0. 25-2. 00 mm water-stable aggregates. The results showed that the ratio of 0. 25-2. 00 mm aggregates in the three kinds of compound soil was increased after 4 years of crop planting and 1∶ 2 compound soil was most favorable for the formation of aggregates.展开更多
Expansive cements are powdery materials which produce expansive stresses during the moist curing process. These cements are classified as shrinkage-compensated or self-stressing cements. The shrinkage compensated is u...Expansive cements are powdery materials which produce expansive stresses during the moist curing process. These cements are classified as shrinkage-compensated or self-stressing cements. The shrinkage compensated is used in the construction industry and will not be investigated in this paper. Self-Stressing cement is widely used in the demolition & fragmentation industry and will be the main focus of this report. The objective of this paper is to discuss the relationship between Sulfate-compounds on the expansion time and degree of expansion of Betonamit expansive cement. Based on literature [1], expansion time is directly proportional to sulfate content when mixed with Portland cement. Hence, as the sulfate content of the cement mixture increases, expansion time increases. However, in this research project the effect of Portland cement was removed to further examine the effect of sulfate on Betonamit only. This phenomenon was investigated using various concentrations of 4 different Sulfate-compounds. The results proved the possibility of decreasing the expansion time of Betonamit and, quite remarkably, a much greater degree of expansion was obtained.展开更多
基金Projects(YKJ201203,CKJB201205)supported by the Nanjing Institute of Technology,China
文摘In order to improve the wear resistance properties of copper substrate, a layer of electroplated nickel was firstly deposited on copper substrate, subsequently these electroplated specimens were treated by slurry pack cementation process with a slurry pack cementation mixture composed of TiO2 as titanizing source, pure Al powder as aluminzing source and also a reducer for titanizing, an activator of NH4Cl and albumen （egg white） as cohesive agent. The Ti-Al coating was fabricated on the surface of electro-deposited nickel layer on copper matrix followed by the slurry pack cementation process. The effects of slurry pack cementation temperature on the microstructures and wear resistance of Ti-Al coating were studied. The results show that the microstructure of the coating changed from NiAl＋Ni3（Ti,Al） to NiAl ＋Ni3（Ti,Al）＋Ni4Ti3 to Ni4Ti3＋NiAl, and to NiAl＋Ni3（Ti,Al）＋NiTi with slurry pack cementation temperature ranging from 800 ℃ to 950 ℃ in 12 h. The friction coefficient of Ti-Al coating decreased and the hardness increased with increasing the slurry pack cementation temperature. The minimum friction coefficient was 1/3 and the minimum hardness was 5 times larger than that of pure copper.
基金Funded by the National Natural Science Foundation of China(Nos.51575369&51675357)
文摘In order to study the effect of electromagnetic compound treatment on the mechanical property, cutting performance and microstructure of cemented carbide, the samples were treated by a self-made electromagnetic compound treatment device with different magnetic field strength(H=1, 1.25 and 1.5 T). The electromagnetic compound treatment method was proposed to couple pulsed magnetic field and pulsed current. The results show that after the pulsed magnetic field treatment, the values of the transverse rupture strength of the samples were respectively reduced by 21%, 20.6% and 20.1%;the cutting performance was decreased by about 4.5%, which means the tool life was decreased. After the electromagnetic compound treatment, the values of the transverse rupture strength of the rectangular samples were respectively increased by 8%, 8.6% and 9.5%, and the tool life was increased by 4.2%, 7% and 10.3%. After the electromagnetic compound treatment, the pulse current provided the driving force for dislocation motion. A strong pulse current driving force is more likely to make the dislocation multiply and slip. A high density dislocation cell is formed within the material, so the mechanical properties were significantly increased.
文摘The morphology,structure and distribution of the rare earth compounds in the YG8R.YT5R and YT14R cemented carbides with additions of trace light rare earths were studied with an analytical electron microscope. The particles of the rare earth compounds in these alloys are all spherical and distribute at interfaces between the Co-cement phase and WC hard phase or(TiW)C solid solution,and in the(TiW)C solid solution.In the YG8R and YTI4R alloys,the rare earth compound is RE_2O_3 with a bcc structure,while in the YT5R alloy. the rare earth compound is RE_2O_2S with a hcp structure.
基金Supported by Special Project of Public Welfare Industry of Ministry of Land and Resources(201411008)
文摘To study the formation process of feldspathic sandstone and sand compound soil in the Mu Us Desert,1∶ 1,1∶ 2 and 1∶ 5 ratios of feldspathic sandstone and sand were mixed to obtain compound soil to plant crops,and analyze the rules of changes in water-stable aggregates of the compound soil among the 4 years crops growing process. The results showed,before crop planting,the order of mass percent of> 0. 25 mm and 0. 25-2. 00 mm water-stable aggregates in three kinds of compound soil was 1∶ 1 > 1∶ 2 > 1∶ 5,showing that the overall content was low; the mass percent of > 0. 25 mm water-stable aggregates remained at 18. 38%-28. 22%; the mass percent of 0. 25-0. 50 mm,0. 50-2. 00 mm,2. 00-5. 00 mm,and > 5. 00 mm water-stable aggregates was close with each other in each kind of compound soil. After4 years of planting,the mass percent of > 0. 25 mm water-stable aggregates in 1∶ 2 compound soil increased significantly and exceeded other2 kinds of compound soil,reached 32. 34%; the main components of > 0. 25 mm water stable aggregates in 1∶ 1,1∶ 2,and 1∶ 5 compound soil were 0. 25-0. 50 mm( 53. 54%),0. 25-0. 50 mm( 59. 43%),0. 05-2. 00 mm( 52. 16%),aggregates; 0. 25-2. 00 mm aggregates increased significantly in all three kinds of compound soil,with the highest increase in 1∶ 2 compound soil; the organic matters of 1∶ 2 compound soil were significantly correlated with 0. 25-0. 50 mm and 0. 25-2. 00 mm water-stable aggregates. The results showed that the ratio of 0. 25-2. 00 mm aggregates in the three kinds of compound soil was increased after 4 years of crop planting and 1∶ 2 compound soil was most favorable for the formation of aggregates.
文摘Expansive cements are powdery materials which produce expansive stresses during the moist curing process. These cements are classified as shrinkage-compensated or self-stressing cements. The shrinkage compensated is used in the construction industry and will not be investigated in this paper. Self-Stressing cement is widely used in the demolition & fragmentation industry and will be the main focus of this report. The objective of this paper is to discuss the relationship between Sulfate-compounds on the expansion time and degree of expansion of Betonamit expansive cement. Based on literature [1], expansion time is directly proportional to sulfate content when mixed with Portland cement. Hence, as the sulfate content of the cement mixture increases, expansion time increases. However, in this research project the effect of Portland cement was removed to further examine the effect of sulfate on Betonamit only. This phenomenon was investigated using various concentrations of 4 different Sulfate-compounds. The results proved the possibility of decreasing the expansion time of Betonamit and, quite remarkably, a much greater degree of expansion was obtained.
