Stability Analysis of Large Section Rocky Tunnel Support Structure

In order to study the stress characteristics of the initial support and secondary lining of the large section tunnel and to solve the problem of secondary lining cracking during operation. Taking the large section tunnel in Zihong village, Qi County as the research object, a numerical simulation method was used to establish a finite element model of the large section tunnel. So as to simulate and analyze the stress characteristics of the support structure of this tunnel. Through the simulation of the initial support and second lining of this large section tunnel in terms of displacement, stress, plastic zone damage and anchor shaft force, the results show that as the excavation progresses, the stress and displacement on the surface of the newly excavated tunnel profile is faster, especially at the side walls and arch footings, the stress and displacement values are slightly larger than other characteristic points, but the final values are stable and converge, and are basically consistent with the field monitoring results, which indicates that this support system is basically in stable state. Therefore, during the tunnel excavation and support process, special attention should be paid to the stability of the sidewalls and footings, and the results of this study will be of great practical significance for tunnel construction and maintenance.

Pressure from surrounding rock of three shallow tunnels with large section and small spacing

With the increasing traffic demand, the closely built three or more tunnels with large section play a significant role in the tunnel construction. However, the interaction among tunnels has important influences on the security and economy of tunnel engineering, and the calculation of pressure from the surrounding rock during the excavation is one of the problems that need to be solved urgently. Based on the practical engineering of three tunnels, the load model of three tunnels was proposed in consideration of the interaction and excavation sequence between tunnels. In comparison with the load model of single tunnel, the construction mechanical characteristics of the three tunnels were analyzed. The results show that the rock pressure of three tunnels calculated by the current tunnel design code is not reliable, and the interaction force increases with the spacing between tunnels.

Similar simulation study on the deformation and failure of surrounding rock of a large section chamber group under dynamic loading

Large and super-large section chamber groups in coal mines are frequently affected by dynamic loads resulting from production activities such as roadway driving and blasting.The stability of the surrounding rock is poor,and it is difficult to control.In this paper,a similar simulation test was used to study the deformation and evolution laws of the surrounding rock of a triangle-shaped chamber group under different dynamic loads.The results showed that under dynamic loading,the vertical stress of the surrounding rock of the chamber group increased in an oscillatory form.The maximum stress concentration coefficient reached 4.09.The damage degree of the roof was greater than that of the two sides.The deformation of the roof was approximately 1.2 times that of the two sides.For the chamber closer to the power source,the stress oscillation amplitude of the surrounding rock was larger,and the failure was more serious.The force of the anchorage structure showed a phased increasing characteristic;additionally,the force of the anchorage structure on the adjacent side of the chambers was greater than that on the other side.This study reveals the deformation and failure evolution laws of the surrounding rock of large section chamber groups under dynamic loading.

Application of 3D-computed tomography angiography technology in large meningioma resection

Objective:To discuss the role of 3D-computed tomography angiography(3D-CTA) technology in reducing injuries of large meningioma surgery.Methods:3D-CTA preoperative examinations were done in 473 patients with large meningioma(simulated group).The images were analyzed by 30 post-processing workstation.By observing the major intracranial blood vessels,venous sinus,and the compression and invasion pattern in the nerve region,assessing risk level of the surgery,simulating the surgical procedures,the surgical removal plan,surgical routes and tumor blood-supplying artery embolisation plan were performed.Two hundred and fifty seven large meningioma patients who didn’t underwent 3D-CTA preoperative examination served as control group.The incidence of postoperative complications,intraoperative blood transfusion and the operation time were compared between these two groups.Results:Compared with the control group,the Simpson’s grade 1 and 11 resection rate was 80.3%(380/473),similar with that of the control(81.3%,209/257).The incidence of postoperative complications in 3D-CTA simulated group was 37.0%which was significantly lower than that(48.2%) of the control(P【0.01). The intraoperative blood supply for simulated group and the control was(523.4±208.1) mL and (592.0±263.3) mL,respectively,with significant difference between two groups(P【0.01).And the operation time[(314.8±106.3)]min was significantly lower in simulated group than that in the control[(358.4±147.9) min](P【0.01).Conclusions:Application of 3D-CTA imaging technology in risk level assessment before large-scaled meningioma resection could assist in the rational planning of tumor resectin,surgical routes,and is helpful in reducing injuries and complications and enhancing the prognosis of the patients.

High prestress truss cable support principle and its application in large cross section coal roadway

With the enlarge of cross section of roadway, the radius of plastic area and broken area increase, and the tensile stress and shear stress distributing in roof coal-rock layers relevantly increase, which induce support effect not obvious for ordinary bolt（cable）. While bounding point and support structure of the truss cable is in vertex angle of roadway, and supplies coal-rock layers in bounding area with the horizontal and vertical pressure, so it settles the support problems in large cross section coal roadway. From the point of view of mechanics, gave emphasis on the invalid mechanics of ordinary bolt （cable） in large cross section coal roadway and supported mechanics of prestress truss cable. The author successfully used this technique in Wuyang Mine, and had the huge economic efficiency and the social benefit.

Taxonomy and phylogeny of the section Chaetoceros(Chaetocerotaceae,Bacillariophyta),with description of two new species

Chaetoceros Ehrenberg is one of the most diverse genera of planktonic diatoms.The species in section Chaetoceros are characterized by cells and setae having numerous chloroplasts and being widely distributed.However,the delimitations of some species are problematic because of limited morphological information in the classical descriptions.Monoclonal strains of the section Chaetoceros were established,morphological features were studied using light and electron microscopy,and the hypervariable D 1-D 3 region of the nuclear ribosomal large subunit gene was sequenced to address phylogenetic relationships.Fifteen species belonging to the section Chaetoceros were recorded,including two new species,C.hainanensis sp.nov.and C.tridiscus sp.nov.Chaetoceros hainanensis was characterized by straight chains,narrowly lanceolate to hexagonal apertures,sibling setae diverging in nearly right angles,stipule-shaped spines on terminal setae and arrowhead-shaped spines on intercalary setae.C.tridiscus had short straight chains,narrowly lanceolate apertures,arrowhead-shaped spines and circular poroids arranged in a grid pattern on terminal and intercalary setae.The phylogenetic analyses revealed six groups formed by 19 species within the section Chaetoceros,which was found to be monophyletic.The subdivision of the section is still not well understood.The morphological characters within each group varied considerably and molecular information on more species are needed to enrich the phylogenetic profiling.

Intelligent optimization of the structure of the large section highway tunnel based on improved immune genetic algorithm

As in the building of deep buried long tunnels,there are complicated conditions such as great deformation,high stress,multi-variables,high non-linearity and so on,the algorithm for structure optimization and its application in tunnel engineering are still in the starting stage. Along with the rapid development of highways across the country,it has become a very urgent task to be tackled to carry out the optimization design of the structure of the section of the tunnel to lessen excavation workload and to reinforce the support. Artificial intelligence demonstrates an extremely strong capability of identifying,expressing and disposing such kind of multiple variables and complicated non-linear relations. In this paper,a comprehensive consideration of the strategy of the selection and updating of the concentration and adaptability of the immune algorithm is made to replace the selection mode in the original genetic algorithm which depends simply on the adaptability value. Such an algorithm has the advantages of both the immune algorithm and the genetic algorithm,thus serving the purpose of not only enhancing the individual adaptability but maintaining the individual diversity as well. By use of the identifying function of the antigen memory,the global search capability of the immune genetic algorithm is raised,thereby avoiding the occurrence of the premature phenomenon. By optimizing the structure of the section of the Huayuan tunnel,the current excavation area and support design are adjusted. A conclusion with applicable value is arrived at. At a higher computational speed and a higher efficiency,the current method is verified to have advantages in the optimization computation of the tunnel project. This also suggests that the application of the immune genetic algorithm has a practical significance to the stability assessment and informationization design of the wall rock of the tunnel.

Dynamic evolution in mechanical characteristics of complex supporting structures during large section tunnel construction

The shallow tunnelling method(STM)often uses temporary supports to divide large section tunnels into several closed or semiclosed sections so as to share the upper load.The complex support system composed of primary and temporary supports can ensure safety during tunnel construction.Based on the large section tunnel of Beijing Subway Line 12,the mechanical characteristics of support system by the double-side-drift method(DSDM)during excavation and demolition were analyzed through numerical simulation and monitoring.The study showed that the middle cave excavation was the most critical stage of the DSDM,during which the load on the supporting structure increased significantly.The temporary vertical support bore most of the new load during middle cave excavation.During the demolition stage,the load was redistributed,which caused arch settlement and section convergence.The removal of the temporary vertical support exerted the greatest impact in this process.The lateral temporary inverted arch changed from axial compression to axial tension after the middle and lower caves were excavated.Based on the mechanical characteristics of the support system,some engineering suggestions were proposed for large section tunnel construction.These research results can provide reference for the design and construction of similar large section tunnels.

Crack elongation and its width of large depth reinforced concrete beams

In order to meet the requirement of structural inspection,the crack spacing and crack width at various heights in the tensile zone of six large depth reinforced concrete beams were measured under several loading levels of serviceability state.The effects of the depth of normal section beams on the crack spacing and crack width were analyzed,and the modified model is proposed for calculating the average crack spacing by thinking about the depth of normal section,the reinforcement arrangement and the effective reinforcement ratio.The relationships of crack widths at any position in the tensile zone and at the reinforcement level on the side surface of beam were studied.By theoretical and statistical analysis,a method is proposed to calculate the ratios of crack widths between any position and the reinforcement level on the side surface of large depth reinforced concrete beams.

Simulation of the RCS Range Resolution of Extremely Large Target

The high frequency hybrid technique based on an iterative Physical Optics(PC)) and the method of equivalent current (MEC) approach is developed for predicting rangeresolution of the Radar Cross Section (RCS) in the spatial domain. We introduce the hybrid highfrequency method to simulate range resolution of the extremely large target in the near zone. Thispaper applies this method to simulate the range resolution of the two 1 m X 1 m plates and the ship.The study improves the speed of simulatingthe range resolution of the extremely large target and isprepared for the application of the extrapolation and interpolation in the spatial domain.

Dynamic plastic response of clamped stiffened plates with large deflection

Study on the dynamic response, and especially the nonlinear dynamic response of stiffened plates is complicated by their discontinuity and inhomogeneity. The finite element method (FEM) and the finite strip method are usually adopted in their analysis. Although many useful conclusions have been obtained, the computational cost is enormous. Based on some assumptions, the dynamic plastic response of clamped stiffened plates with large deflections was theoretically investigated herein by a singly symmetric beam model. Firstly, the deflection conditions that a plastic string must satisfy were obtained by the linearized moment-axial force interaction curve for singly symmetric cross sections and the associated plastic flow rule. Secondly, the possible motion mechanisms of the beam under different load intensity were analysed in detail. For structures with plastic deformations, a simplified method was then given that the arbitrary impact load can be replaced equivalently by a rectangular pulse. Finally, to confirm the validity of the proposed method, the dynamic plastic response of a one-way stiffened plate with four fully clamped edges was calculated. The theoretical results were in good agreement with those of FEM. It indicates that the present calculation model is easy and feasible, and the equivalent substitution of load almost has no influence on the final deflection.

工艺孔对大截面部分包覆钢-混凝土组合梁受弯性能影响的试验研究

为了研究工艺孔对大截面部分包覆钢-混凝土组合梁(大截面PEC梁)受弯性能的影响,对5根不同构造的大截面PEC梁进行了静力试验,研究了两点加载下主次梁腹板开洞方式对大截面PEC梁试件受弯性能、延性、破坏模式等的影响规律。结果表明:静力荷载作用下,各个试件均表现出良好的延性,腹部开孔对试件承载力和截面刚度有一定的削弱作用。型钢主钢件的应变与混凝土的应变沿截面高度方向均大致呈线性变化,符合平截面假定。按《部分包覆钢-混凝土组合结构技术规程》(T/CECS 719—2020)计算得到的开工艺孔的大截面PEC梁抗弯承载力与试验值误差较小,受尺寸效应影响不大,所采用计算公式安全可靠。

杭州电竞中心结构设计重难点概述

杭州电竞中心内圈主体结构采用钢框架-支撑结构,外圈采用“大倾角梭形斜柱+多段钢折梁框架”,是集承重与抗侧力于一体的结构体系,屋盖采用车辐式索承网格自平衡结构形式。详细介绍了地下结构、中央场馆结构的设计要点,门厅处利用建筑造型空间设计为多段钢折梁与跨层桁架相结合的结构形式;室内二层至三层楼面设计一浮空弧形人行桥,截面形式为薄壁钢箱梁,桥宽2.2m,跨度57m,采用“上挂下支”的稳定结构形式。对整体结构进行了静力弹性、动力弹塑性、振动台试验、典型节点有限元、整体稳定以及局部稳定等系列分析与试验。结果表明:结构在静力荷载和地震作用下强度和刚度均满足规范要求;典型节点极限承载力为荷载设计值的4.17倍;结构整体稳定性安全系数为3.79;斜柱局部稳定安全系数为2.52。合理的设计保证了结构的安全、经济和实用性。

新景矿大断面岩巷综掘技术研究与应用

为提高掘进速度,保证巷道稳定,在新景矿15号煤采区集中辅助运输巷开展了大断面岩巷综合机械化掘进技术的研究。在分析当前施工工艺以及支护中存在问题的基础上,提出了以EBZ320D掘进机和CMM2-25型锚杆钻机为主要设备的综合机械化岩巷掘进作业线。理论分析了锚杆索围岩强度强化理论,结合现场实际情况,设计了以不同长度锚索为主的支护方式。现场应用表明,应用新的综合机械化掘进技术后,巷道变形量小,掘进速度快,施工成本低,经济社会效益显著,应用效果良好。

震陷土层变化下变截面单、群桩动力响应差异

为研究地震动作用下震陷土层厚度不同时大直径变截面单桩与群桩基础的动力响应差异,依托厦门第二东通道翔安大桥,通过振动台模型试验,开展震陷土层厚度30、40、50 cm时,单桩与群桩基础桩周土震陷量、桩顶水平位移、桩身加速度及弯矩动力响应差异研究.结果表明:随着震陷层厚度增大,单桩与群桩基础桩周土震陷量、桩顶水平位移、桩身加速度及弯矩均逐渐增大,且加速度及弯矩在变截面处突变;同一震陷层厚度下,群桩基础桩周土震陷量较单桩大,但群桩基础加速度、桩顶水平位移及桩身弯矩均小于单桩.震陷场地桩基础设计时,应着重考虑变截面单桩与群桩动力响应差异,保证桩基础抗震性能.

大型耙吸挖泥船结构设计要点

为实现大型耙吸挖泥船结构设计安全、合理、可靠,以某大型耙吸挖泥船为例,分析大型耙吸挖泥船结构设计特点,从结构设计、强度评估、疲劳评估和振动评估等角度论证其设计要点,通过对泥舱结构设计分析,给出泥舱设计的关键节点,对关键节点进行强度分析和疲劳分析,结果表明,该船局部关键区域应力水平较高,低周疲劳在关键区域的疲劳中占据主要地位,建立三维有限元模型计算挖泥船固有频率,对比该大型耙吸挖泥船激励频率与固有频率,结果表明,船体总振动固有频率通常可以避开激励频率,生活楼固有频率与激励频率较为接近。

面间煤柱与顺槽“掘-充-留”一体化科学问题与技术

我国将煤炭作为兜底保障能源的局面短期内无法改变,仍将长时间面临煤炭资源保护与煤基固废利用率低的难题。通过创新采掘方法,同时实现提高煤炭资源回采率、规模化处置煤基固废,为煤炭行业绿色可持续发展提供了新途径。在深入调研煤炭资源开采技术发展现状的基础上,提出了煤矿“掘-充-留”掘进新工法。从大断面巷道快速掘进、连续高效充填和巷道安全留设3个方面,通过理论分析、数值模拟等手段,系统论述了“掘-充-留”工法的科学问题和关键技术,研究结果表明:①针对大断面巷道快速掘进、掘进工作面围岩稳定性控制等工程难题,凝练了煤岩特性与掘进机截割参数匹配机制、覆岩载荷空间传递机制与围岩变形机理、锚杆/索-顶板相互作用关系及支护机制3个科学难题,构建了以掘进区地质环境超前实时感知、落-装-运煤多工序智能协同作业、钻锚支架随掘随支围岩时效控制和大断面巷道防漏风及通风优化为核心的技术体系;②从大断面巷道承载体系及时构建及其承载性能调控两个方面凝练了连续高效充填的科学问题,包括充填体-煤层-锚杆/索协同承载机制、多元固废基充填材料水化固结机制,明晰充填体物理力学特性时空演化规律,建立了充填空间安全高效搭建、充填材料工作性能调控、充填材料流动-固结感知为核心的连续高效充填关键技术体系,相关理论与技术的突破可以为充填材料的原材料优选及配比设计、添加剂开发/选型及工作性能调控、掘进速率及充填步距优化设计、充填体固结监测等提供基础理论依据;③基于巷道安全留设及全生命周期内围岩易断裂、易片帮和易损伤等关键难题,阐述了巷道围岩应力场时空分布特征、巷道变形与损伤演化机制、巷道围岩工程质量监测与稳定性调控理论3个科学问题,形成了以巷道围岩稳定性智能预警、巷道围岩变形控制为核心的关键技术体系。开展煤矿“掘-充-留”工法的科学研究与工程示范,实现固废规模化处置-面间煤柱高效回收-顺槽快速掘进的协同,可以推动煤炭行业绿色低碳转型发展。

区段煤柱下大断面回采巷道不同成巷方式分析研究

为了探究在区段煤柱下大断面巷道在掘进时受到扰动最小的一种成巷方式,以乌兰色太煤矿掘进52202工作面运输顺槽为研究背景,针对该工作面实际地质资料,通过数值模拟分析了大断面巷道在不同成巷方式条件下的塑性区形态、应力场及位移场分布规律。结果表明,先掘进5.4 m宽正常巷道,后扩帮2 m的成巷方式为最优成巷方式,将其应用于工程实践,为同类型区段煤柱下大断面巷道提供参考依据。

乌兰木伦煤矿大断面硐室围岩变形破坏规律及控制

针对煤矿井下巷道大断面硐室的围岩变形破坏问题,以乌兰木伦煤矿井下分选及充填大断面硐室为研究对象,采用相似模拟实验方法,进行单调递增加载和恒定荷载加载单轴压缩实验,对大断面硐室围岩变形破坏规律进行了研究。结果表明:①2种加载方式在压密阶段、弹性变形阶段及微破裂稳定发展阶段破坏演化和变形位移趋势相似。②采用单调递增加载方式的试样裂纹较少但裂纹缝隙较大,试样沿着主裂纹突然发生破断,期间有大量碎屑飞出,试样变形位置主要集中在围岩边界,破坏时释放能量较多,但峰后释放能量持续时间较短。③采用恒定荷载加载方式的试样应力保持不变,应变缓慢增加,期间产生大量微小裂纹,试样变形位置主要围绕在硐室周围,破坏时释放能量较少,但峰后释放能量持续时间较长。依据大断面硐室围岩变形破坏规律,提出了锚杆索支护方案:硐室顶部打长锚索,将顶板和上方坚硬岩石连成整体;在硐室煤岩交界处打倾斜锚杆,将煤岩交界面与周围岩体紧密连接。数值模拟结果表明,支护后围岩应力、位移、塑性区均明显减小,围岩稳定性大幅提高,支护效果良好。

矿井采煤过程中大断面巷道支护技术研究

煤炭资源是中国重要的能源资源之一,然而在矿井采煤过程中,巨大煤矿的开采和应力变化等因素导致支护不足和大断面巷道变形严重。为了解决这一问题,需要开展更深入、更系统的研究。首先介绍了大断面巷道的特点以及在采煤过程中存在的支护难题,包括巷道变形、支架开裂等问题。然后分析了传统支护方式存在的不足之处,并提出了一种新型支护技术——填充式支护技术。该技术采用填充材料将巷道周围空隙填满,从而增强了支护效果,提高了大断面巷道开采的安全性和可靠性。