The change rules associated with hot deformation of FGH96 alloy were investigated by isothermal two-pass hot deformation tests in the temperature range 1050–1125°C and at strain rates ranging from 0.001 to 0.1 s...The change rules associated with hot deformation of FGH96 alloy were investigated by isothermal two-pass hot deformation tests in the temperature range 1050–1125°C and at strain rates ranging from 0.001 to 0.1 s^(-1) on a Gleeble 3500 thermo-simulation machine. The results showed that the softening degree of the alloy between passes decreases with increasing temperature and decreasing strain rates. The critical strain of the first-pass is greater than that of the second-pass. The true stress–true strain curves showed that single-peak dynamic recrystallization, multi-peak dynamic recrystallization, and dynamic response occur when the strain rate is 0.1, 0.01, and 0.001 s^(-1), respectively. The alloy contains three different grain structures after hot deformation: partially recrystallized tissue, completely fine recrystallized tissue, coarse-grained grains. The small-angle grain boundaries increase with increasing temperature. Increasing strain rates cause the small-angle grain boundaries to first increase and then decrease.展开更多
基金Financial support from the National Natural Science Foundation of China (No. 51471023)the Ministry of Science and Technology of the People’s Republic of China (National 973 Program, No. 2014GB120000)
文摘The change rules associated with hot deformation of FGH96 alloy were investigated by isothermal two-pass hot deformation tests in the temperature range 1050–1125°C and at strain rates ranging from 0.001 to 0.1 s^(-1) on a Gleeble 3500 thermo-simulation machine. The results showed that the softening degree of the alloy between passes decreases with increasing temperature and decreasing strain rates. The critical strain of the first-pass is greater than that of the second-pass. The true stress–true strain curves showed that single-peak dynamic recrystallization, multi-peak dynamic recrystallization, and dynamic response occur when the strain rate is 0.1, 0.01, and 0.001 s^(-1), respectively. The alloy contains three different grain structures after hot deformation: partially recrystallized tissue, completely fine recrystallized tissue, coarse-grained grains. The small-angle grain boundaries increase with increasing temperature. Increasing strain rates cause the small-angle grain boundaries to first increase and then decrease.
