Study on basement structures of the northeast Pamirs

Basement structures and basement interfaces are obtained by finite-difference and time-term methods using Pg-wave data from two deep seismic sounding (DSS) profiles in the Artush-Jiashi strong earthquake area. The geological units differ considerably in basement depth. The basement structures of contact zones between two geological units also vary obviously, which marks the existence of boundary faults. Finally, we make a remark upon the relationship between characteristics of basement structures and seismicity in the Artush meizoseismal area and the Jiashi earthquake swarm area.

Aeromagnetic Interpretation of Basement Structures and Geometry in Parts of the Middle Benue Trough,North Central,Nigeria

The research of an analysis of aeromagnetic data collected in the middle Benue Trough in north-central Nigeria is presented.A detailed analysis of basement structures is conducted in order to identify regions with high hydrocarbon potential that is different from those discovered by earlier researchers.Aeromagnetic data were filtered by using the Butterworth and Gaussian filters,transformed by engaging the reduction to the equator technique,and subsequently enhanced.To estimate magnetic basement depths at various places throughout the basin,the Euler deconvolution depth weighting approach was used.Eleven(11)sub-basins with depths ranging from-2000 m to-8000 m were also identified by Euler’s findings.The sub-basins trend in the NE-SW direction while the average sediment thickness is found to be more than 3 km.The extracted structural features indicate areas like Kadi Blam and Kado areas in the southeastern part and Ogoja and Obudu in the southern part of the study area as regions with high structural densities.These areas coincide with the areas delineated as the sub-basins.The cross-sections generated reveal depressions caused by the action of some tectonic activities in the area.This study identified undulat­ing basement topography believed to be due to tectonic activities as well as five areas that are possible targets for hydrocarbon exploration.

Aeromagnetic data and geological structure of continental China:A review

We review the latest aeromagnetic geological data of continental China. We discuss the latest achievements in geological mapping and the newly detected features based on aeromagnetic data. Using aeromagnetic data collected for more than 50 years, a series of 1：5000000 and 1：1000000 aeromagnetic maps of continental China were compiled using state-of-the-art digital technology, and data processing and transformation. Guided by plate tectonics and continental dynamics, rock physical properties, and magnetic anomalies, we compiled maps of the depth of the magnetic basement of continental China and the major geotectonic units, and presented newly detected geological structures based on the aeromagnefic data.

Thick-skinned Contractional Salt Structures in the Kuqa Depression,the Northern Tarim Basin:Constraints from Physical Experiments

Thick-skinned contractional salt structures are widely developed in the western Kuqa depression, northern Tarim basin. To understand the mechanisms that govern the development of these structures, physical experiments are conducted and the results show that they are largely governed by the activities of basement faults and the forming of paleo-uplifts and basement slopes. The model materials in this study are dry sand, vaseline and plasticene （or hard foam）, simulating the suprasalt, salt, and subsalt layers respectively. The experiments show that, due to the activities of basement faults and the forming of the paleo-uplifts, salt bodies usually accumulate and thicken significantly on the middle top of the paleo-uplifts which are constrained by the pre-exiting boundary faults. The development of large-scale thrust faults and salt nappes is favored by the basement slops with larger dips. The experiments also conclude that differential structural deformation could occur between the subsalt and suprasalt layers because of the presence of salt layers. Their geometries and the locations of structural highs are different, despite of the great similarities in the uplifted areas. The pierced salt diapir is not observed in the experiments, which indicates that the contractional shortening does not effectively accelerate the development of the salt diapir.

The Deep Structure Feature of the Sichuan Basin and Adjacent Orogens

The basin-mountain system in the Sichuan Basin （SCB） reflects the main tectonic activity and the orogenic denudation in this region. The seismic probing work reveals the deep structure of the basin-mountain system. The seismic work was re-sampled to the Moho depth and the sedimentary thickness as well as the P-wave velocity=depth function to analyze the deep structure of the SCB and adjacent orogens. The results show two deposit centers in the SCB： the Deyang area in the west and the Nanchuan area in the east and depression uplift exists in the southwestern part of the SCB; the Moho shallowers gradually from the west to east （ca. 62-36 km deep）,the South-North seismic belt （SNSB） is very distinctive： the Moho depth is much shallower （〈 50 km）to the east of the SNSB, whereas it is much deeper（〉50 kin）to the west of the SNSB, suggesting that the SNSB rather than the Longmen Shan tectonic belt is a main Moho transition belt; the topography and the top interface of the basement have the same undulation trend when the sedimentary thickness and the Moho depth have a mirror relationship; the low velocity zone developed in the Kangdian thrust and fold belt and Songpan-Garze belt implied a soft, weak and thick crust there showing tectonic activity in these areas.

Ray hit analysis method and its application to complex upper crustal structure survey

Based on the results obtained from Pg wavefront imaging in active source deep seismic sounding, we propose a new ray hit analysis method for high-resolution seismic refraction profile data processing. This method can be used to further determine possible refraction interface, especially spatial location of basement and its pattern characteristics in complex upper crustal structure region, making data processing for high-resolution refraction profiles more fine. We use this method to study the crystalline basement structure of east part of A＇nyemaqên suite zone at northeast side of Qinghai-Xizang Plateau and the basement patterns as well as its spreading features at the east part of Anemaqen suite zone and its adjacent region were determined.

Construction of Subsurface Geological Structures Using a Drilling Database: A Case Study for an Intra-Arc Basin, the Osaka Plain, Southwest Japan

Subsurface geological cross sections of 0 - 200 m depth were constructed using a dense drilling database of the Osaka Plain in the intra-arc Osaka Basin of the Japan island arc, an active plate margin. The cross sections revealed the subsurface geological structures and the geometry of folding and faulting in the basin. The comparison between the constructed subsurface cross sections and the seismic sections of the basement and basin fills at a depth of 1500 - 2000 m showed that the basement and shallow subsurface structures are similar;however, the shallow cross sections were of higher resolution than the deep seismic profiles.

Structural Characteristics of the Basement beneath Qiangtang Basin in Qinghai-Tibet Plateau: Results of Interaction Interpretation from Seismic Reflection/Refraction Data

The studies on configuration, character/property of the basement of Qiangtang basin is helpful for evaluating petroleum and nature gas resources as well as understanding the basin evolvement. Recently a moderate to high-grade metamorphic gneiss rock was found underlying beneath very low metamorphic Ordovician strata in Mayer Kangri to the north of the central uplift. That fact actually proved existence of the crystalline basement just the distribution and structures of pre-Paleozoic crystalline basement still remain puzzle. In recent years a number of active sources deep seismic profiling, to aim at lithospheric structure of northern Tibet and petroleum resources of the Qiangtang basin, had been conducted that make it possible to image the structure of the basement of the Qiangtang. Near vertical reflection profiles, included those acquired previously and those during 2004 to 2008, have been utilized in this study. By through the interaction process and interpretation between the reflection profiles and the wide-angle profile, a model with the detailed structure and velocity distribution from surface to the depth of 20 km of Qiangtang basin has been imaged.Based on the results and discussions of this study, the preliminary conclusions are as follows： （1） The velocity structure section （~20 kin） that is interactively constrained by the refraction and reflection seismic data reveals that the sedimentary stratum gently lie until 10 km in the south Qiangtang basin. （2） The basement consists of fold basement （the upper） and crystalline basement （the lower）.The fold basement buried at the average depth of 6 km with a velocity of 5.2-5.8 km/s. The shallowest appear at range of the central uplift. The crystalline basement is underlying beneath the fold basement at the average depth of 10 km with a velocity of 5.9-6.0 km/s except near Bangong-Nujiang suture. （3） The high-velocity body at the depth range of 3-6 km of the central uplift is considered as a fragment of the crystalline basement that perhaps was raised by Thermal or deformation. （4） The lower-consolidated fold basement show more affinity of Yangtze block but the crystalline basement seems more approximate to Lhasa terrene in geophysical nature. We have attempted to improve the resolution and reliability by interaction of the active seismic data and prove it effective to image complex basement structure. It will be a potential to process the piggy-back acquisition data and has wide prospects.

Structural characteristics of the basement and the prospective of favorable oil and gas blocks in the Tacheng basin

The Tacheng basin has been identified as a Carboniferous basement with a central uplift, sur- rounded by orogenic belts. This identification was based on the comprehensive analysis of field outcrops, regional magnetic and gravimetric data, skeleton seismic profiles, magnetotelluric profiles and drilling data. Here, we present gravimetric and magnetic data analyses of the basement structures of the Tacheng basin and its base formation. We also provide a magnetotelluric profile analysis of the structural features and tectonic framework of basin-mountain patterns. We use local geology, drilling data, and other comprehensive information to document the tectonic framework of the basement of the basin. Small-scale nappe structures are found in the northern basin, whereas stronger and more pronounced thrusting structures are found to the south and east of the basin. The basin is divided into four first-order tectonic units： a central uplift, a northern depression, a southeastern depression and a western depression. In addition, the Emin sag is suggested as a possible reservoir for oil and gas.

Basement interface structural characteristics beneath Jiashi strong earthquake swarm area in Xinjiang, China

The seismic data obtained from high resolution seismic refraction profile in Jiashi strong earthquake swarm area in Xinjiang, China were further processed with ray hit analysis method and more complete basement interface structural characteristics beneath Jiashi strong earthquake swarm area were determined. The results show that there are two clear basement interfaces at the upper crust in Jiashi strong earthquake swarm area. The first one with buried depth ranging from 2.6 km to 3.3 km presents integral and continuous structure, and it appears an inclined plane interface and smoothly rises up toward Tianshan Mountain. The second basement interface with buried depth from 8.5 km to 11.8 km, is the antiquated crystalline basement of Tarim basin. Near the post number of 37 km, the buried depth of the crystalline basement changed abruptly by 2.5 km, which maybe result from an ultra crystalline basement fault. If taking this fault as a boundary, the crystalline basement could be divided into two parts, i.e. the southwestern segment with buried depth about 11.5 km, and the northeastern segment with buried depth approxi-mately from 8.5 km to 9.0 km. That is to say, in each segment, the buried depth changes not too much. The northeast segment rises up as a whole and upheaves slightly from southwest to northeast, which reflects the upper crustal deformation characteristics under the special tectonic background at the northwestern edge of Tarim basin.

The fine velocity structure of sediment－base－ment layer in the Three－GorgesRegionoftheChangjiangRiver（YangtzeRiver）

In this paper, the study on the fine velocity structure of sedimental and basement layers along 4 deep seismic sounding profiles in the Three Gorges Region of the Changjiang River (Yangtze River) are presented. The velocity of sedimental cover is larger in hills of western Hubei in the western profiles, the total thickness is about 0～0.3 km. However, it becomes thick in southern part of Zigui basin and Zushui river valley, about 5.0 km and 4.0 km thick respectively. The sedimental cover is very thick in Jianghan plains in the eastern profiles, about 5～8 km, and the velocity is lower. The velocity of basemental plane is greater than 6.0 km/s over the whole region. An interface can be divided within the sedimental layer, it is about 3～4 km deep in Jianghan plains, while it approximates to surface in other regions. The profiles are cut by faults in many positions. Where the faults pass, the velocity isopleth varies sharply, and the velocity is obviously low. The basement layer is characterized by high velocity and low gradient, there exist 3 high velocity anomalous zones within the layer, which are located at the west, south and east of Huangling Anticlinorium respectively. They are the upwelling materials of basalt magma with high velocity from deep crust. Perhaps, this process took place before formation of Huangling Anticlinorium. Its action produces the significant variation of basement plane depth and the correspondent development and action of faults.

Structural Control of Ore Mineralization in the Southeastern Margin of Western Nigeria Basement

Structural analyses are often ignored in mineral prospecting endeavor of any geological terrain despite the importance of geological structures in the formation of ore deposits. This paper correlates the results of mineral prospecting campaign to those of the structural analysis in the southeastern margin of the western Nigeria basement. The mineral prospecting was executed by essentially geochemical-exploration methods, while the structural analysis was achieved by lineament analysis using Landsat-8 imagery. The mineral prospecting campaign eventually led to the discovery of gold bearing marble deposit in the Dagbala area;silver and copper bearing silicified sheared rock in the Dagbala, Ojirami, Erurhu and Atte areas;lead and zinc bearing metaconglomerate around Egbigele;uranium and thorium bearing pegmatite in the Dagbala area. The Landsat-8 lineament analysis showed the presence of a shear zone in the central, folds in the SW, and fractures in the NE parts of the study area. The relation between the two is such that the gold and silver-copper mineralization is associated with the shear zone, the lead-zinc mineralization to the folds, and the uranium-thorium mineralization to the fractures. Indeed, geological structures guide mineralization and their analysis can be employed for mineral prospecting.

基底坡折带对盐上覆褶皱冲断构造形成演化影响的实验模拟:以库车坳陷西段米斯坎塔克背斜为例

为探明库车坳陷西段含盐褶皱-冲断带内盐下基底坡折带对盐上覆沉积盖层构造形成演化的影响,本次研究选取米斯坎塔克背斜为研究实例,基于地震剖面解译结果,利用物理模拟实验方法运行了两组挤压型砂箱模型。模拟实验结果表明:(1)在含盐沉积盆地中,受区域挤压应力作用,当盐下基底地层较为平坦时,盐上覆沉积盖层倾向于发育两翼对称式的滑脱褶皱(盐相关褶皱);当盐下基底地层存在先存坡折带时,盐上覆沉积盖层易发育两翼非对称式的滑脱褶皱(盐相关褶皱)。(2)盐下先存基底坡折带对后期挤压变形中盐岩的侧向流动具有阻挡作用,促使盐岩在基底坡折带处聚集增厚,进而加强盐上覆地层的褶皱作用,导致盐上覆地层发育非对称式盐相关褶皱,且褶皱翼部易发育调节性逆冲断层。结合库车坳陷西段却勒地区盐下基底形态特征、米斯坎塔克背斜平面和剖面构造特征及实验模拟结果,推断研究区盐下先存基底坡折带分布对盐上覆地层构造变形演化具有重要控制作用,影响米斯坎塔克背斜构造形成演化。

一种历史建筑群回迁移位技术

依托上海安康苑历史建筑群平移回迁工程,针对地下室结构顶板设计时未考虑平移临时荷载、顶板存在4处不同的标高面,以及平移距离较远等工况难题,提出了车载法+顶推法相结合的成套施工方法。具体为:将历史建筑群先采用SPMT液压车车载平移至地下室顶板边界,再对顶板结构进行临时加固及高差处施工垫梁处理,最后采用顶推法将建筑平移回原址顶板结构上。实践表明:先采用车载法减少了施工工期和造价,后采用顶推法解决了平移工况对地下室顶板承载要求高的难题。

Precise Seismic Substructural Model of the Eocene Chorgali Limestone in the Turkwal Oil Field, Central Potwar, Pakistan

The precise seismic substructural interpretation of the Turkwal oil field in the Central Potwar region of district Chakwal of Pakistan has been carried out. The research work was confined to the large fore-thrust that serves as an anticlinal structural trap through ten 2 D seismic lines. A precise seismic substructural model of the Eocene Chorgali Limestone with precise orientation of thrust and oblique slip faults shows the presence of a huge fracture, which made this deposit a good reservoir. The abrupt surface changes in dip azimuth for the Eocene Chorgali Limestone verifies the structural trends and also the presence of structural traps in the Turkwal field. The logs of three wells(Turkwal deep X-2, Turkwal-01 and Fimkassar-01) were analyzed for petrophysical studies, well synthetic results and generation of an Amplitude Versus Offset(AVO) model for the area. The AVO model of Turkwal deep X-2 shows abrupt changes in amplitude, which depicts the presence of hydrocarbon content. Well correlation technique was used to define the overall stratigraphic setting and the thickness of the reservoir formation in two wells, Turkwal-01 and Turkwal deep X-2. The Eocene Chorgali Limestone in Turkwal-01 is an upward thrusted anticlinal structure and because of the close position of both wells to the faulted anticlinal structure, its lesser thickness differs compared to Turkwal deep X-2. The overall results confirm that the Turkwal field is comparable to several similar thrust-bound oil-bearing structures in the Potwar basin.

STRUCTURAL EVOLUTION AND METALLOGENY OF SOUTH XINJIANG METALLOGENIC BELT,JIANGXI,SOUTH CHINA

ＳＴＲＵＣＴＵＲＡＬＥＶＯＬＵＴＩＯＮＡＮＤＭＥＴＡＬＬＯＧＥＮＹＯＦＳＯＵＴＨＸＩＮＪＩＡＮＧＭＥＴＡＬＬＯＧＥＮＩＣＢＥＬＴ，ＪＩＡＮＧＸＩ，ＳＯＵＴＨＣＨＩＮＡＬｉｕＪｉｓｈｕｎＷｕＹａｎｚｈｉＬｉＰｅｉｚｈｅｎｇ（ＤｅｐａｒｔｍｅｎｔｏｆＧｅ...

Study of an Uplift of Sargodha High by Stratigraphical and Structural Interpretation of an East-West Seismic Profile in Central Indus Basin, Pakistan

Research Area comprises of Punjab Monocline, Sulaiman Foredeep and Eastern Part of Sulaiman Fold Belt (from east to west) in Central Indus Basin, Pakistan. Sargodha High is located in northeast of a Seismic Profile AB. Time and Depth models show the subsurface crustal variations near Sargodha High, which separates Upper Indus Basin from Central Indus Basin. The deposition of Pre-Cambrian sediments is uniform in area and Paleozoic sediments (Permian & Cambrian) are thinning in west. Mesozoic sediments (Cretaceous, Jurassic & Triassic) and younger sediments (Paleocene) are not deposited in this part suggesting an uplift of Sargodha High during Paleozoic time. An uneven distribution of Paleozoic rocks shows some thickness in east but erosion, thinning and almost truncation in west indicate their depocenter in east. This also represents a time of uplift of Sargodha High that shifts depocenter westward. Seismic data show a thick Mesozoic deposition in west, which onlaps on the Permo-Triassic unconformity suggesting an area of non-deposition. The gradual uplift of Sargodha high continues, which tilts the Mesozoic strata forming wedge shape geometry.

Depth and Structural Parameters Determination of the Sedimentary Basin in Atmur Nuqra Area, South Eastern Desert, Egypt Using Aeromagnetic Data Analysis

The study area is located at the south of the eastern desert of Egypt between latitudes 24°N to 25°N and longitudes 33°E to 33°50'E covering an area of about 9407 km2. The study area is mainly covered with sediments whose age extends from the upper Cretaceous to the Quaternary, in addition to the presence of some basement rocks such as younger granites, metasediments and metagabbro. The research aims essentially to determine the thickness of the sedimentary basin by determining the depth to the top of basement and delineating the subsurface geological structures which affected this sedimentary basin. The Euler depth map exhibited that the north parts of the area have shallow depth values from 1000 m to 2000 m. The southern parts also show a shallow to moderate depths ranging from 1000 m to 2400 m. The deepest parts are located at the middle and at the western parts and are ranging in value from 3000 m to more than 4000 m. The horizontal derivative and tilt derivative techniques proved that the most effective trends all over the study area are NW-SE and NE-SW directions as mentioned in geologic lineaments map. The basement tectonic map shows clearly all the faults affected the area. It shows that there are many high blocks trending mainly in NW-SE and NE-SW directions. All high blocks surround a large sedimentary basin reaches depth of about more than 4000 m. All the results produced from 2D-modeling illustrate that the sedimentary basinal area (G2) is the deeper basin all over the area and it is controlled by some faults and fractures. 3D inversion was used and resulted in that the area of study have many high blocks at shallow to moderate depths which surrounding a large sedimentary basinal area with very deep depth values. All the techniques which applied in this research led to that the largest sedimentary basin is located at the center of the study area with NW-SE trend and depth value of about 4000 m.

A Preliminary Analysis of Relations Between Tectonic Deformation of Sedimentary Cover and Basement in Kuqa Depression

Study of seismic activity in the Kuqa area enables us to infer some possible active faults in basement from the epicentral distribution on different profiles. The relations between active faults in the basement and surface structures are analyzed and the difference between sedimentary cover and basement in their deformation characteristics and the genesis are discussed. The following conclusions have been drawn: (1) the epicentral distribution indicates that, the east Qiulitag and south and north Qiulitag deep faults in the basement correspond to the east and west Qiulitag anticlines, respectively. Moreover, deep faults also exist beneath the Yiqiklik and Yaken anticlines. It indicates that the formation of surface structures is controlled by deep structures; (2) A NE-trending strike-slip fault develops along the line from the western termination of Yiqiklik structure to Dongqiu Well 5 and a NW-trending active fault on the western side of Baicheng. The two active faults across the tectonic strike are the main causes for tectonic segmentation of the Kuqa depression and possibly the cause for the middle segment (Kuqa-Baicheng) of the depression to be more shortened than both its eastern and western terminations; (3) The difference between the sedimentary cover and basement in their deformation characteristics depends mainly on the different properties of media between them. The lithospheric strength of the basement in the basin is fairly high, which determines the basement deformation to be mainly of brittle fracture——seismic activity. While the strength of sedimentary cover is low, where there exist weak thin layers, such as coal and gyps. Under the effect of strong tectonic compression, the sedimentary rocks may undergo strong viscous or plastic flow deformation; meanwhile, an aseismic detachment may take place along the weak layers.

中国中西部含油气盆地超深层油气成藏条件与勘探潜力分析

随着油气工业发展,向深层超深层领域进军已成为常规油气勘探开发的主要趋势。通过对中国中西部含油气盆地超深层油气勘探与研究进展的深入分析,明确深层超深层油气成藏的有利条件,指出中西部叠合盆地的海相碳酸盐岩、碎屑岩、基岩及火山岩3大领域是未来超深层油气勘探重点领域,超深层元古界是值得勘探重视的潜在领域,并指出超深层油气地质理论与关键技术的攻关方向。研究表明:(1)克拉通盆地海相碳酸盐岩发育以多套海相烃源岩、白云岩和断控型缝洞体等规模储集层、3类有利成藏组合,是寻找碳酸盐岩大油气田的重点领域;(2)前陆盆地下组合发育以煤系为主的湖相优质烃源岩、(扇)三角洲砂体为主的规模储集层、大型构造圈闭,是寻找碎屑岩大油气田的重点领域;(3)以花岗岩和变质岩为主的基岩储集层不受埋深限制,源岩-基岩接触型成藏组合最有利,紧邻生烃凹陷及大型走滑断裂带的基岩潜山是深层-超深层基岩油气藏勘探的重点领域;(4)中新元古界受超大陆裂解及全球冰期影响,发育受陆内裂陷控制的优质烃源岩,资源潜力较大,未来勘探地位值得重视。