Using the 28℃ isotherm to define the Western Pacific Warm Pool （WPWP）, this study analyzes the seasonal variability of the WPWP thermohaline structure on the basis of the monthly-averaged sea temperature and salini...Using the 28℃ isotherm to define the Western Pacific Warm Pool （WPWP）, this study analyzes the seasonal variability of the WPWP thermohaline structure on the basis of the monthly-averaged sea temperature and salinity data from 1950 to 2011, and the dynamic and thermodynamic mechanisms based on the monthly-averaged wind, precipitation, net heat fluxes and current velocity data. A△T=-0.4℃ is more suitable than other temperature criterion for determining the mixed layer （ML） and barrier layer （BL） over the WPWP using monthly-averaged temperature and salinity data. The WPWP has a particular thermohaline structure and can be vertically divided into three layers, i.e., the ML, BL, and deep layer （DL）. The BL thickness （BLT） is the thickest, while the ML thickness （MLT） is the thinnest. The MLT has a similar seasonal variation to the DL thickness （DLT） and BLT. They are all thicker in spring and fall but thinner in summer. The temperatures of the ML and BL are both higher in spring and autumn but lower in winter and summer with an annual amplitude of 0.15℃, while the temperature of the DL is higher in May and lower in August. The averaged salinities at these three layers are all higher in March but lower in September, with annual ranges of 0.41-0.45. Zonal currents, i.e., the South Equatorial Current （SEC） and North Equatorial Counter Current （NECC）, and winds may be the main dynamic factors driving the seasonal variability in the WPWP thermohaline structure, while precipitation and net heat fluxes are both important thermodynamic factors. Higher （lower） winds cause both the MLT and BLT to thicken （thin）, a stronger （weaker） NECC induces MLT, BLT, and DLT to thin （thicken）, and a stronger （weaker） SEC causes both the MLT and BLT to thicken （thin） and the DLT to thin （thicken）. An increase （decrease） in the net heat fluxes causes the MLT and BLT to thicken （thin） but the DLT to thin （thicken）, while a stronger （weaker） precipitation favors thinner （thicker） MLT but thicker （thinner） BLT and DLT. In addition, a stronger （weaker） NECC and SEC cause the temperature of the three layers to decrease （increase）, while the seasonal variability in salinity at the ML, BL, and DL might be controlled by the subtropical cell （STC）.展开更多
Vertical structure of an unconformity can be divided into three layers:basal conglomerate or transgressive sand,weathered clay layer and leached rock.When the weathered clay layer has a little thickness or limited dis...Vertical structure of an unconformity can be divided into three layers:basal conglomerate or transgressive sand,weathered clay layer and leached rock.When the weathered clay layer has a little thickness or limited distribution,the overlying and underlying strata will contact directly,and the lithology is often different.This lithologic difference causes different fluid transporting capacity,and it also展开更多
The lower Cambrian Niutitang Formation hydrocarbon source rocks at the Dingshan- Lintanchang structure in the southeast Sichuan Basin were of medium-good quality with two excellent hydrocarbon-generating centers devel...The lower Cambrian Niutitang Formation hydrocarbon source rocks at the Dingshan- Lintanchang structure in the southeast Sichuan Basin were of medium-good quality with two excellent hydrocarbon-generating centers developed in the periphery areas, with a possibility of forming a medium to large-sized oil-gas field. Good reservoir rocks were the upper Sinian （Dengying Formation） dolomites. The mudstone in the lower Cambrian Niutitang Formation with a good sealing capacity was the cap rock. The widely occurring bitumen in the Dengying Formation indicates that a paleo oil pool was once formed in the study area. The first stage of paleo oil pool formation was maturation of the lower Cambrian source rocks during the late Ordovician. Hydrocarbon generation from the lower Cambrian source rocks stopped due to the Devonian-Carboniferous uplifting. The lower Cambrian source rocks then restarted generation of large quantities of hydrocarbons after deposition of the middle Permian sediments. This was the second stage of the paleo oil pool formation. The oil in the paleo oil pool began to crack during the late Triassic and a paleo gas pool was formed. This paleo gas pool was destroyed during the Yanshan-Himalayan folding, uplifting and denudation. Bitumen can be widely seen in the Dengying Formation in wells and outcrops in the Sichuan Basin and its periphery areas. This provides strong evidence that the Dengying Formation in the Sichuan Basin and its periphery areas was once an ultra-large structural-lithologic oil-gas field, which was damaged during the Yanshan-Himalayan period.展开更多
A squall line on 14 June 2009 in the provinces of Jiangsu and Anhui was well simulated using the Advanced Regional Prediction System （ARPS） model. Based on high resolution spatial and temporal data, a detailed analy...A squall line on 14 June 2009 in the provinces of Jiangsu and Anhui was well simulated using the Advanced Regional Prediction System （ARPS） model. Based on high resolution spatial and temporal data, a detailed analysis of the structural features and propagation mechanisms of the squall line was conducted. The dynamic and thermodynamic structural charac- teristics and their causes were analyzed in detail. Unbalanced flows were found to play a key role in initiating gravity waves during the squall line＇s development. The spread and development of the gravity waves were sustained by convection in the wave-CISK process. The squall line＇s propagation and development mainly relied on the combined effect of gravity waves at the midlevel and cold outflow along the gust front. New cells were continuously forced by the cold pool outflow and were enhanced and lifted by the intense upward motion. At a particular phase, the new cells merged with the updraft of the gravity waves, leading to an intense updraft that strengthened the squall line.展开更多
This work mainly articulated the effects of nozzle structure on arc characteristics in gas pool coupled activating TIG （GPCA-TIG） welding process by using Fluent Software. Different models were set up to adapt the d...This work mainly articulated the effects of nozzle structure on arc characteristics in gas pool coupled activating TIG （GPCA-TIG） welding process by using Fluent Software. Different models were set up to adapt the different torch structure during computer progress. The specific configuration of the welding torch made the gas flow in outer gas passage constrained. The nozzle structure has great influence on outer gas distribution because of the changing of coupling region between the outer active gas and molten pool surface. When the coupling degree is reduced or the outer gas passage become smaller, the oxygen in outer gas penetrates into the arc plasma and spreads to the arc region more easily. Owing to its cooling effects, the morphology of arc is contracted, and the arc temperature is increased. When the inner wall and the outer wall of outer gas passage are not parallel, the wide top and narrow bottom nozzle shape can bring more oxygen into the arc plasma, the arc is contracted and the peak temperature of arc rises a little more comparing to the narrow top and wide bottom one.展开更多
Fundamental ecological information on the Chinese kissing loach (Leptobotia tchangi) was collected in the North Tiaoxi River, China, in September 2010. The length-frequency distribution calculated using FiSAT software...Fundamental ecological information on the Chinese kissing loach (Leptobotia tchangi) was collected in the North Tiaoxi River, China, in September 2010. The length-frequency distribution calculated using FiSAT software showed the population structure of this kissing loach could be classified into four age groups suggesting that the life span of the loach should be 3 - 4 years. A stepwise multiple linear regression analysis revealed that the density of this kissing loach was significantly and positively correlated with water velocity, while the body size was significantly and positively correlated with river bed pebble size. It suggested that water velocity and variation of pebble size play important roles in the full life history of this kissing loach. Thus, maintenance of the rapid current and variety of substrate are essential for the conservation of this species under the present conditions in the river, which also can support river restoration being in harmony with survival of this kissing loach.展开更多
基金The National Basic Research Program(973 Program)of China under contract No.2012CB417402the CAS Strategy Pioneering Program under contract No.XDA10020104+1 种基金the Global Change and Air–Sea Interaction under contract No.GASI-03-01-01-02the National Natural Science Foundation of China under contract No.41406012
文摘Using the 28℃ isotherm to define the Western Pacific Warm Pool （WPWP）, this study analyzes the seasonal variability of the WPWP thermohaline structure on the basis of the monthly-averaged sea temperature and salinity data from 1950 to 2011, and the dynamic and thermodynamic mechanisms based on the monthly-averaged wind, precipitation, net heat fluxes and current velocity data. A△T=-0.4℃ is more suitable than other temperature criterion for determining the mixed layer （ML） and barrier layer （BL） over the WPWP using monthly-averaged temperature and salinity data. The WPWP has a particular thermohaline structure and can be vertically divided into three layers, i.e., the ML, BL, and deep layer （DL）. The BL thickness （BLT） is the thickest, while the ML thickness （MLT） is the thinnest. The MLT has a similar seasonal variation to the DL thickness （DLT） and BLT. They are all thicker in spring and fall but thinner in summer. The temperatures of the ML and BL are both higher in spring and autumn but lower in winter and summer with an annual amplitude of 0.15℃, while the temperature of the DL is higher in May and lower in August. The averaged salinities at these three layers are all higher in March but lower in September, with annual ranges of 0.41-0.45. Zonal currents, i.e., the South Equatorial Current （SEC） and North Equatorial Counter Current （NECC）, and winds may be the main dynamic factors driving the seasonal variability in the WPWP thermohaline structure, while precipitation and net heat fluxes are both important thermodynamic factors. Higher （lower） winds cause both the MLT and BLT to thicken （thin）, a stronger （weaker） NECC induces MLT, BLT, and DLT to thin （thicken）, and a stronger （weaker） SEC causes both the MLT and BLT to thicken （thin） and the DLT to thin （thicken）. An increase （decrease） in the net heat fluxes causes the MLT and BLT to thicken （thin） but the DLT to thin （thicken）, while a stronger （weaker） precipitation favors thinner （thicker） MLT but thicker （thinner） BLT and DLT. In addition, a stronger （weaker） NECC and SEC cause the temperature of the three layers to decrease （increase）, while the seasonal variability in salinity at the ML, BL, and DL might be controlled by the subtropical cell （STC）.
文摘Vertical structure of an unconformity can be divided into three layers:basal conglomerate or transgressive sand,weathered clay layer and leached rock.When the weathered clay layer has a little thickness or limited distribution,the overlying and underlying strata will contact directly,and the lithology is often different.This lithologic difference causes different fluid transporting capacity,and it also
基金supported by the National Basic Research Program of China (No. 2005CB422106)
文摘The lower Cambrian Niutitang Formation hydrocarbon source rocks at the Dingshan- Lintanchang structure in the southeast Sichuan Basin were of medium-good quality with two excellent hydrocarbon-generating centers developed in the periphery areas, with a possibility of forming a medium to large-sized oil-gas field. Good reservoir rocks were the upper Sinian （Dengying Formation） dolomites. The mudstone in the lower Cambrian Niutitang Formation with a good sealing capacity was the cap rock. The widely occurring bitumen in the Dengying Formation indicates that a paleo oil pool was once formed in the study area. The first stage of paleo oil pool formation was maturation of the lower Cambrian source rocks during the late Ordovician. Hydrocarbon generation from the lower Cambrian source rocks stopped due to the Devonian-Carboniferous uplifting. The lower Cambrian source rocks then restarted generation of large quantities of hydrocarbons after deposition of the middle Permian sediments. This was the second stage of the paleo oil pool formation. The oil in the paleo oil pool began to crack during the late Triassic and a paleo gas pool was formed. This paleo gas pool was destroyed during the Yanshan-Himalayan folding, uplifting and denudation. Bitumen can be widely seen in the Dengying Formation in wells and outcrops in the Sichuan Basin and its periphery areas. This provides strong evidence that the Dengying Formation in the Sichuan Basin and its periphery areas was once an ultra-large structural-lithologic oil-gas field, which was damaged during the Yanshan-Himalayan period.
基金supported by the National Basic Research Program of China (Grant No. 2013CB 430105)the Key Program of the Chinese Academy of Sciences (Grant No. KZZD-EW-05)+1 种基金the project of CAMS (Chinese Academy of Meteorological Sciences) (Grant No. 2011LASWB15)the National Natural Sciences Foundation of China (Grant No. 41175060)
文摘A squall line on 14 June 2009 in the provinces of Jiangsu and Anhui was well simulated using the Advanced Regional Prediction System （ARPS） model. Based on high resolution spatial and temporal data, a detailed analysis of the structural features and propagation mechanisms of the squall line was conducted. The dynamic and thermodynamic structural charac- teristics and their causes were analyzed in detail. Unbalanced flows were found to play a key role in initiating gravity waves during the squall line＇s development. The spread and development of the gravity waves were sustained by convection in the wave-CISK process. The squall line＇s propagation and development mainly relied on the combined effect of gravity waves at the midlevel and cold outflow along the gust front. New cells were continuously forced by the cold pool outflow and were enhanced and lifted by the intense upward motion. At a particular phase, the new cells merged with the updraft of the gravity waves, leading to an intense updraft that strengthened the squall line.
基金supported by National Natural Science Foundation of China(Grant No.51265029)
文摘This work mainly articulated the effects of nozzle structure on arc characteristics in gas pool coupled activating TIG （GPCA-TIG） welding process by using Fluent Software. Different models were set up to adapt the different torch structure during computer progress. The specific configuration of the welding torch made the gas flow in outer gas passage constrained. The nozzle structure has great influence on outer gas distribution because of the changing of coupling region between the outer active gas and molten pool surface. When the coupling degree is reduced or the outer gas passage become smaller, the oxygen in outer gas penetrates into the arc plasma and spreads to the arc region more easily. Owing to its cooling effects, the morphology of arc is contracted, and the arc temperature is increased. When the inner wall and the outer wall of outer gas passage are not parallel, the wide top and narrow bottom nozzle shape can bring more oxygen into the arc plasma, the arc is contracted and the peak temperature of arc rises a little more comparing to the narrow top and wide bottom one.
文摘Fundamental ecological information on the Chinese kissing loach (Leptobotia tchangi) was collected in the North Tiaoxi River, China, in September 2010. The length-frequency distribution calculated using FiSAT software showed the population structure of this kissing loach could be classified into four age groups suggesting that the life span of the loach should be 3 - 4 years. A stepwise multiple linear regression analysis revealed that the density of this kissing loach was significantly and positively correlated with water velocity, while the body size was significantly and positively correlated with river bed pebble size. It suggested that water velocity and variation of pebble size play important roles in the full life history of this kissing loach. Thus, maintenance of the rapid current and variety of substrate are essential for the conservation of this species under the present conditions in the river, which also can support river restoration being in harmony with survival of this kissing loach.
