An extended state observer with adjustable bandwidth for measurement noise

In this paper,a bandwidth-adjustable extended state observer(ABESO)is proposed for the systems with measurement noise.It is known that increasing the bandwidth of the observer improves the tracking speed but tolerates noise,which conflicts with observation accuracy.Therefore,we introduce a bandwidth scaling factor such that ABESO is formulated to a 2-degree-of-freedom system.The observer gain is determined and the bandwidth scaling factor adjusts the bandwidth according to the tracking error.When the tracking error decreases,the bandwidth decreases to suppress the noise,otherwise the bandwidth does not change.It is proven that the error dynamics are bounded and converge in finite time.The relationship between the upper bound of the estimation error and the scaling factor is given.When the scaling factor is less than 1,the ABESO has higher estimation accuracy than the linear extended state observer(LESO).Simulations of an uncertain nonlinear system with compound disturbances show that the proposed ABESO can successfully estimate the total disturbance in noisy environments.The mean error of total disturbance of ABESO is 15.28% lower than that of LESO.

Backstepping Sliding Mode Control Based on Extended State Observer for Hydraulic Servo System

Hydraulic servo system plays an important role in industrial fields due to the advantages of high response,small size-to-power ratio and large driving force.However,inherent nonlinear behaviors and modeling uncertainties are the main obstacles for hydraulic servo system to achieve high tracking perfor-mance.To deal with these difficulties,this paper presents a backstepping sliding mode controller to improve the dynamic tracking performance and anti-interfer-ence ability.For this purpose,the nonlinear dynamic model is firstly established,where the nonlinear behaviors and modeling uncertainties are lumped as one term.Then,the extended state observer is introduced to estimate the lumped distur-bance.The system stability is proved by using the Lyapunov stability theorem.Finally,comparative simulation and experimental are conducted on a hydraulic servo system platform to verify the efficiency of the proposed control scheme.

Extended state observer-based control with an adjustable parameter for a large ground-based telescope

The high-precision requirements will always be constrained due to the complicated operating conditions of the ground-based telescope. Owing to various internal and external disturbances, it is necessary to study a control method, which should have a good ability on disturbance rejection and a good adaptability on system parameter variation. The traditional proportional-integral(PI) controller has the advantage of simple and easy adjustment, but it cannot deal with the disturbances well in different situations. This paper proposes a simplified active disturbance rejection control law, whose debugging is as simple as the PI controller, and with better disturbance rejection ability and parameter adaptability. It adopts a simplified second-order extended state observer(ESO) with an adjustable parameter to accommodate the significant variation of the inertia during the different design stages of the telescope. The gain parameter of the ESO can be adjusted online with a recursive least square estimating method once the system parameter has changed significantly. Thus, the ESO can estimate the total disturbances timely and the controller will compensate them accordingly. With the adjustable parameter of the ESO, the controller can always achieve better performance in different applications of the telescope. The simulation and experimental verification of the control law was conducted on a 1.2-meter ground based telescope. The results verify the necessity of adjusting the parameter of the ESO, and demonstrate better disturbance rejection ability in a large range of speed variations during the design stages of the telescope.

PMSM speed control using adaptive sliding mode control based on an extended state observer

In this study,a composite strategy based on sliding-mode control( SMC) is employed in a permanent-magnet synchronous motor vector control system to improve the system robustness performance against parameter variations and load disturbances. To handle the intrinsic chattering of SMC,an adaptive law and an extended state observer( ESO) are utilized in the speed SMC controller design. The adaptive law is used to estimate the internal parameter variations and compensate for the disturbances caused by model uncertainty. In addition,the ESO is introduced to estimate the load disturbance in real time. The estimated value is used as a feed-forward compensator for the speed adaptive sliding-mode controller to further increase the system's ability to resist disturbances. The proposed composite method,which combines adaptive SMC( ASMC) and ESO,is compared with PI control and ASMC. Both the simulation and experimental results demonstrate that the proposed method alleviates the chattering of SMC systems and improves the dynamic response and robustness of the speed control system against disturbances.

Extended state observer based smooth switching control for tilt-rotor aircraft

A tilt-rotor aircraft has three flight modes: helicopter mode, airplane mode and conversion mode. Unlike the traditional aircraft, the tilt-rotor aircraft, which combines the characteristics of helicopters and fixed-wing aircraft, is a complex multi-body system with the violent variation of the aerodynamic parameters. For these characteristics, a new smooth switching control scheme is provided for the tilt-rotor aircraft. First, the reference commands for airspeed and nacelle angles are calculated by analyzing the conversion corridor and the conversion path. Subsequently, based on the finite-time switching theorem, an average dwell time condition is designed to guarantee the stability in the switching process. Besides, considering the state vibrations and bumps may appear in switching points, the fuzzy weighted logic is employed to improve the system transient performance. For disturbance rejection, three extended state observers are designed separately to estimate the disturbances in the switched systems. Compared with the traditional auto disturbance rejection control and proportion integration differentiation control, this method overcomes the conservatism of wasting the whole model information. The control performances of robustness and smoothness are verified with simulation, which shows that the new smooth switching control scheme is more targeted and superior than the traditional design method.

Differential geometric guidance command with finite time convergence using extended state observer

For improving the performance of differential geometric guidance command(DGGC), a new formation of this guidance law is proposed, which can guarantee the finite time convergence(FTC) of the line of sight(LOS) rate to zero or its neighborhood against maneuvering targets in three-dimensional(3D) space. The extended state observer(ESO) is employed to estimate the target acceleration, which makes the new DGGC more applicable to practical interception scenarios. Finally, the effectiveness of this newly proposed guidance command is demonstrated by the numerical simulation results.

Intelligent Process Fault Diagnosis for Nonlinear Systems with Uncertain Plant Model via Extended State Observer and Soft Computing

There have been many studies on observer-based fault detection and isolation (FDI), such as using unknown input observer and generalized observer. Most of them require a nominal mathematical model of the system. Unlike sensor faults, actuator faults and process faults greatly affect the system dynamics. This paper presents a new process fault diagnosis technique without exact knowledge of the plant model via Extended State Observer (ESO) and soft computing. The ESO’s augmented or extended state is used to compute the system dynamics in real time, thereby provides foundation for real-time process fault detection. Based on the input and output data, the ESO identifies the un-modeled or incorrectly modeled dynamics combined with unknown external disturbances in real time and provides vital information for detecting faults with only partial information of the plant, which cannot be easily accomplished with any existing methods. Another advantage of the ESO is its simplicity in tuning only a single parameter. Without the knowledge of the exact plant model, fuzzy inference was developed to isolate faults. A strongly coupled three-tank nonlinear dynamic system was chosen as a case study. In a typical dynamic system, a process fault such as pipe blockage is likely incipient, which requires degree of fault identification at all time. Neural networks were trained to identify faults and also instantly determine degree of fault. The simulation results indicate that the proposed FDI technique effectively detected and isolated faults and also accurately determine the degree of fault. Soft computing (i.e. fuzzy logic and neural networks) makes fault diagnosis intelligent and fast because it provides intuitive logic to the system and real-time input-output mapping.

A non-contact spacecraft architecture with extended stochastic state observer based control for gravity mission

A novel non-contact spacecraft architecture with the extended stochastic state observer for disturbance rejection control of the gravity satellite is proposed.First,the precise linear driving non-contact voice-coil actuators are used to separate the whole spacecraft into the non-contact payload module and the service module,and to build an ideal loop with precise dynamics for disturbance rejection control of the payload module.Second,an extended stochastic state observer is enveloped to construct the overall nonlinear external terms and the internal coupled terms of the payload module,enabling the controller design of the payload module turned into the linear form with simple bandwidth-parameterization tuning in the frequency domain.As a result,the disturbance rejection control of the payload module can be explicitly achieved in a timely manner without complicated tuning in actual implementation.Finally,an extensive numerical simulation is conducted to validate the feasibility and effectiveness of the proposed approach.

Civil aircraft fault tolerant attitude tracking based on extended state observers and nonlinear dynamic inversion

For the problem of sensor faults and actuator faults in aircraft attitude control,this paper proposes a fault tolerant control(FTC)scheme based on extended state observer(ESO)and nonlinear dynamic inversion(NDI).First,two ESOs are designed to estimate sensor faults and actuator faults respectively.Second,the angular rate signal is reconstructed according to the estimation of sensor faults.Third,in angular rate loop,NDI is designed based on reconstruction of angular rate signals and estimation of actuator faults.The FTC scheme proposed in this paper is testified through numerical simulations.The results show that it is feasible and has good fault tolerant ability.

Event-triggered model-free adaptive control for a class of surface vessels with time-delay and external disturbance via state observer

This paper provides an improved model-free adaptive control(IMFAC)strategy for solving the surface vessel trajectory tracking issue with time delay and restricted disturbance.Firstly,the original nonlinear time-delay system is transformed into a structure consisting of an unknown residual term and a parameter term with control inputs using a local compact form dynamic linearization(local-CFDL).To take advantage of the resulting structure,use a discrete-time extended state observer(DESO)to estimate the unknown residual factor.Then,according to the study,the inclusion of a time delay has no effect on the linearization structure,and an improved control approach is provided,in which DESO is used to adjust for uncertainties.Furthermore,a DESO-based event-triggered model-free adaptive control(ET-DESO-MFAC)is established by designing event-triggered conditions to assure Lyapunov stability.Only when the system’s indicator fulfills the provided event-triggered condition will the control input signal be updated;otherwise,the control input will stay the same as it is at the last trigger moment.A coordinate compensation approach is developed to reduce the steady-state inaccuracy of trajectory tracking.Finally,simulation experiments are used to assess the effectiveness of the proposed technique for trajectory tracking.

Enhanced adaptive nonlinear extended state observer for pure feedback systems with matched and mismatched disturbances

In this paper, an enhanced adaptive nonlinear extended state observer (EANESO) for single-input single-output pure feedback systems in the presence of external time-varying disturbances is proposed. In this paper, a nonlinear system with matched and mismatched disturbances is considered. The conventional extended state observer (ESO) can only be applied to systems that are in the form of integral chains. Moreover, this method has limitations in the face of mismatched disturbances. In the presence of time-varying disturbances, the traditional ESOs cannot estimate the disturbances accurately. To overcome this limitation, an EANESO is proposed in this paper. The main idea is to design the nonlinear ESO (NESO) to estimate the states of the system and multiple disturbances simultaneously. The observer gains are considered time-varying and adjusted with adaptation laws to improve the estimation accuracy and overcome the peaking phenomenon. Next, the proposed controller is designed based on output feedback to eliminate the effects of multiple disturbances and stabilize the closed-loop system. Subsequently, the stability analysis of the closed-loop system and convergence of the observer error are discussed. Finally, the proposed method is applied to the inverted pendulum system. The simulated results show good performance of the proposed method as compared with a recently published scheme in the related literature.

Observer-Based Control for a Cable-Driven Aerial Manipulator under Lumped Disturbances

With the increasing demand for interactive aerial operations,the application of aerial manipulators is becoming more promising.However,there are a few critical problems on how to improve the energetic efficiency and pose control of the aerialmanipulator forpractical application.In this paper,a novel cable-drivenaerialmanipulatorused for remote water sampling is proposed and then its rigid-flexible coupling dynamics model is constructed which takes joint flexibility into account.To achieve high precision joint position tracking under lumped disturbances,a newly controller,which consists of three parts:linear extended state observer,adaptive super-twisting strategy,and fractional-order nonsingular terminal sliding mode control,is proposed.The linear extended state observer is adopted to approximate unmeasured states and unknown lumped disturbances and achieve model-free control structure.The adaptive super-twisting strategy and fractional-order nonsingular terminal sliding mode control are combined together to achieve good control performance and counteract chattering problem.The Lyapunovmethod is utilized to prove the overall stability and convergence of the system.Lastly,various visualization simulations and ground experiments are conducted,verifying the effectiveness of our strategy,and all outcomes demonstrate its superiorities over the existing control strategies.

An Improved Deadbeat Predictive Current Control Method for SPMSM Drives with a Novel Adaptive Disturbance Observer

To improve the dynamic performance of conventional deadbeat predictive current control(DPCC)under parameter mismatch,especially eliminate the current overshoot and oscillation during torque mutation,it is necessary to enhance the robustness of DPCC against various working conditions.However,the disturbance from parameter mismatch can deteriorate the dynamic performance.To deal with the above problem,firstly,traditional DPCC and the parameter sensitivity of DPCC are introduced and analyzed.Secondly,an extended state observer(ESO)combined with DPCC method is proposed,which can observe and suppress the disturbance due to various parameter mismatch.Thirdly,to improve the accuracy and stability of ESO,an adaptive extended state observer(AESO)using fuzzy controller based on ESO,is presented,and combined with DPCC method.The improved DPCC-AESO can switch the value of gain coefficients with fuzzy control,accelerating the current response speed and avoid the overshoot and oscillation,which improves the robustness and stability performance of SPMSM.Finally,the three methods,as well as conventional DPCC method,DPCC-ESO method,DPCC-AESO method,are comparatively analyzed in this paper.The effectiveness of the proposed two methods are verified by simulation and experimental results.

Extended-state-observer-based robust torsional vibration suppression for rolling mill main drive system with input saturation

A robust torsional vibration suppression strategy is proposed for the main drive system of the rolling mill subject to uncertainties,disturbances and input saturation.With given model information incorporated into observer design,an extended state observer that relies only on roller speed measurements is developed to estimate the system states and lumped uncertainties of the rolling mill main drive system.To handle the motor torque saturation,an auxiliary signal system with the same order as the plant is constructed.The error between the control input and plant input is taken as the input of the constructed auxiliary system,and a number of signals are generated to compensate for the effect of the motor torque saturation.Furthermore,a robust output feedback controller is introduced to obtain better transient and steady-state performance of the rolling mill main drive system and the stability of the closed-loop system is strictly proved via Lyapunov theory.Finally,comparative simulations are performed to verify the effectiveness and superiority of the proposed control strategy.

基于时变增益扩张状态观测器的逆变器系统自适应super-twisting电压鲁棒控制

针对电压源逆变器系统中负载扰动和参数摄动,本文提出了一种基于时变增益扩张状态观测器的自适应super-twisting鲁棒电压控制新方法.首先考虑负载扰动,建立单相逆变器系统的动态模型,进而考虑系统参数摄动,通过引入非测量辅助状态变量,将上述动态模型转化为只包含匹配扰动的状态方程;其次,设计时变增益扩张状态观测器,以实现对非测量辅助状态变量与包含负载变化和参数摄动等因素在内的集总不确定项的估计;最后,基于此扩张状态观测器,设计采用自适应super-twisting算法的滑模控制律,以实现逆变器系统输出电压对其参考电压的快速准确跟踪并增强系统鲁棒性.仿真实验结果表明:所提出的时变增益扩张状态观测器可在保证观测误差收敛的同时,有效抑制"初始微分峰值"现象;采用自适应super-twisting算法的滑模控制策略可使逆变器系统输出电压具有较高跟踪精度和较小总谐波失真率,增强系统的抗干扰能力,并降低控制输入信号"抖振".

Robust gain-scheduled missile autopilot design based on multifrequency extended state observers

This paper describes the design and implementation of a three-axis acceleration control autopilot for an asymmetric tail-controlled,skid-to-turn tactical missile.In an earlier flight test,degraded autopilot performance was attributed to multiple disturbances and uncertainties and the presence of hidden coupling terms,giving rise to a miss distance of greater than 20 m.To address these issues,the missile dynamics are decomposed into the angular rate dynamics as fast and the acceleration dynamics as slow subsystem using the singular perturbation theory to analyze a multi-time-scale property.Multifrequency extended state observers are then incorporated into the gain scheduling technique to attenuate disturbances,thus enhancing the control performance significantly.In the proposed engineering/practical design framework for missile autopilot,simple,conventional,and explicit tuning rules are provided.And the proposed control scheme can achieve input-to-state stability across the entire flight envelope under unknown but bounded disturbances.The advantages of the method over existing benchmark approaches are shown through nonlinear numerical simulations.This is supported by evidence from a new flight test result with a miss distance of only 2 m.

Decentralized control design and implementation for magnetic levitation systems with extended state observer

This paper focuses on control design and synthesize for a class of magnetic levitation systems,which have a decentralized control for each suspension point.Due to the existence of mechanical coupling among four suspension points,large modeling uncertainties,unpredictable disturbances during the operation,and measurement noises,becomes challenging.To estimate and compensate for the effects of lumped uncertainties,this study employs the extended state observer(ESO)in conjunction with active disturbance rejection control(ADRC).Specifically,a novel ESO is proposed that utilizes output signals and their derivatives to estimate the lumped uncertainties more accurately,which simplifies the convergence proof conditions and has well engineering performance.This article is written in honor of B.M.Chen on the occasion of his 60th birthday.Specifically,this paper is inspired by his pioneering work on composite nonlinear feedback,which combines linear feedback and nonlinear compensator to enhance system performance Chen et al.(IEEE Trans Autom Control,40:427-439,2003).

On geometric interpretation of extended state observer: a preliminary study

Borrowing the framework of the geometric approach, this paper tries to analyze and explain why it is possible for the extended state observer (ESO) to estimate the state vector and total disturbance accurately. The geometric approach has provided an elegant and rigorous framework to redefine some key concepts in modern control theory, such as controllability and observability. Moreover, those concepts can be extended to deal with systems in the presence of inaccessible disturbances, such as controlled invariants and conditioned invariants. It is shown in this paper that the augmented system of the ESO is unknown-state unknown-input completely reconstructable in finite time interval. A numerical simulation is given to verify the state vector and total disturbance can be estimated accurately by the ESO if the augmented system is unknown-state unknown-input completely reconstructable.

Super-twisting扩张状态观测器在四旋翼飞行器故障重构中的应用

针对四旋翼飞行器姿态控制系统的故障重构问题,提出一种基于super-twisting算法的扩张状态观测器,以扩张状态的形式对飞行器执行机构故障进行直接估计,同时实现了旋翼增益故障的故障隔离与精确重建。为抑制外部扰动对观测器稳定性的影响,一般需要将观测器的增益设置较大,但同时会引发噪声扩展问题。因此引入了观测器参数的自适应调整算法,在保证观测器稳定收敛的同时降低了噪声对故障重构精度的影响。此外,基于李雅普诺夫方法证明了滑模观测器的渐近收敛特性,并通过数值仿真验证了观测器对故障重构的有效性。仿真结果表明所构建的故障观测器能够迅速地对执行机构故障做出反应,并在外界扰动存在的情况下对故障程度实现准确估计。

Proportional-derivative Control of Second-order Tethered Satellites System Based on Extended State Observer and Feed-forward Compensation

This paper researches the proportional-derivative(PD)feedback control with feed-forward compensations from input for a triangular tethered satellite system(TTSS),and the extended state observer(ESO)design which is further incorporated in control to estimate the structural uncertainties in system.By expanding Lagrangian equations under chosen variables,the dynamic equations of TTSS are derived which is the second-order nonlinear equation.Then the feedback control under typical feed-forward compensations is discussed as the nonlinear functions in system are counteracted,and the controlled outputs are computed by deriving the transfer functions of the transformed structures.Moreover,in case of the uncertain structures in system which may constrain the control e®ect,ESO-based PD control is further proposed,and the observed error and controlled accuracy are analyzed by Lyapunov functions.Simulation results on the designed controls are presented to validate the theoretic analyses.