期刊文献+
共找到370篇文章
< 1 2 19 >
每页显示 20 50 100
Preparation,characterization and catalytic properties of S_2O_8^(2-)/ZrO_2-CeO_2 solid superacid catalyst 被引量:25
1
作者 樊国栋 沈茂 +1 位作者 张昭 贾发瑞 《Journal of Rare Earths》 SCIE EI CAS CSCD 2009年第3期437-442,共6页
A novel solid superacid catalyst S2O8^2-/ZrO2-CeO2 was prepared by a coprecipitation method and characterized by means of XRD FTIR, BET, TEM and DSC/TG analysis methods. The results indicated that incorporation of app... A novel solid superacid catalyst S2O8^2-/ZrO2-CeO2 was prepared by a coprecipitation method and characterized by means of XRD FTIR, BET, TEM and DSC/TG analysis methods. The results indicated that incorporation of appropriate amounts of Ce into the catalyst was beneficial to the formation of sole tetragonal ZrO2 and effectively prevented from the formation of monoclinic ZrO〉 and restrained the loss of sulfated species. XRD revealed the presence of tetragonal Ce0.16Zr0.84O2phase in the case of S2O8^2-/ZrO2-CeO2 calcined above 500 ℃. Catalytic activities of S2O8^2-/ZrO2-CeO2 for the esterification of lactic acid with n-butanol was studied. The results showed that the optimum conditions were as follows: calcination temperature of the catalyst 600 ℃, n(lactic acid):n(n-butyl alcohol)=1.0:3.0, w(S2O8^2-/ZrO2- CeO2)=12.0%, reaction temperature 145 ℃, and reaction time 2 h. The esterification efficiency of lactic acid was about 96.6%. 展开更多
关键词 solid superacid catalyst S2O8^2-/ZrO2-CeO2 n-butyl lactate ESTERIFICATION rare earths
下载PDF
Complex Solid Superacid Catalyst WO_3-ZrO_2-SO_4^(2-) Structure of Acid Sites on the Catalyst
2
作者 黄银燕 张改莲 张文朴 《Rare Metals》 SCIE EI CAS CSCD 1992年第3期185-189,共5页
A new type of complex solid superacid catalyst WO_3-ZrO_2-SO_4^(2-)with an acid strength H_0≤-16.04 was prepared by kneading Zr(OH)_4 or amorphous ZrO_2 with tungstic acid(H_2WO_4)(W/Zr=0.15),followed by exposing thi... A new type of complex solid superacid catalyst WO_3-ZrO_2-SO_4^(2-)with an acid strength H_0≤-16.04 was prepared by kneading Zr(OH)_4 or amorphous ZrO_2 with tungstic acid(H_2WO_4)(W/Zr=0.15),followed by exposing this complex hydroxides to 0.5 tool/L H_2SO_4,calcining in air at 700~800℃ for 3h.This catalyst possesses both strong Bronsted acidity and strong Lewis acidity experimentally showed by IR observation of pyridine absorbed on it.XPS and AES techniques were employed to examine the valence states of tungsten, zirconium,sulfur and their interactions.The structure of sulfur species was studied by infrared spectroscopy and a structure model of active site was proposed upon these results. 展开更多
关键词 superacid catalyst TUNGSTEN ZIRCONIUM SULFUR Structure model
下载PDF
Catalytic Hydrothermal Liquefaction of Algae for Production of Bio-oil with Solid Superacid Catalyst SO_(4)^(2−)/ZrO_(2)
3
作者 LIU Mengfan YU Xin +4 位作者 YU Xiaofan ZHAO Yongnian FENG Lijuan LI Xianguo YAO Shuo 《Journal of Ocean University of China》 SCIE CAS CSCD 2022年第5期1214-1226,共13页
Solid superacid SO_(4)^(2−)/ZrO_(2)as heterogeneous catalyst was prepared to upgrade the bio-oil in the progress of hydrother-mal liquefaction(HTL)for the represented algae of Chlorella vulgaris and Enteromorpha proli... Solid superacid SO_(4)^(2−)/ZrO_(2)as heterogeneous catalyst was prepared to upgrade the bio-oil in the progress of hydrother-mal liquefaction(HTL)for the represented algae of Chlorella vulgaris and Enteromorpha prolifera.The solid superacid catalyst could obviously adjust the composition of the bio-oil and improve the higher heating values(HHVs).The catalytic performance could be regulated by adjusting the acid amount and acid strength of SO_(4)^(2−)/ZrO_(2).Furthermore,it was explored the catalytic effects of SO_(4)^(2−)/ZrO_(2)by the HTL for algae major model components,including polysaccharides,proteins,lipids,binary mixture and ternary mixture.The results showed that the introducing of SO_(4)^(2−)/ZrO_(2)catalyst could increase the yields of bio-oil from proteins and lipids,and avoid the Maillard reaction between polysaccharides and proteins.Moreover,a possible reaction pathway and mechanisms has proposed for the formation of bio-oils from HTL of algae catalyzed by SO_(4)^(2−)/ZrO_(2)based on the systematic research of the producing bio-oil from major model components. 展开更多
关键词 BIO-OIL heterogeneous catalyst solid superacid catalyst hydrothermal liquefaction algae major model components
下载PDF
A Novel Way to Prepareγ-A1_2O_3 Supported SO_4^(2-)/ZrO_2 Solid Superacid Catalysts for n-Butane Isomerization
4
作者 Ting LEI Yi TANG +2 位作者 Wei Ming HUA Jin Suo XU Zi GAO (Department of Chemistry, Fudan University, Shanghai 200433) 《Chinese Chemical Letters》 SCIE CAS CSCD 2000年第1期89-92,共4页
Highly active solid superacid catalysts for n-butane isomerization, SZ/A1_2O_3-P, were prepared by supporting SO-(4-2)/ZrO2, (SZ) on y-A1_2O_3 carrier using a precipitation method. The activities of some catalysts wer... Highly active solid superacid catalysts for n-butane isomerization, SZ/A1_2O_3-P, were prepared by supporting SO-(4-2)/ZrO2, (SZ) on y-A1_2O_3 carrier using a precipitation method. The activities of some catalysts were enhanced significantly j The activity of the most active sample. 60%SZ/Al_2O3-P, was even about 2 times more active than that of the SZ catalyst. 展开更多
关键词 SO_4^(2-)/ZrO_2 n-Butane Isomerization γ-A1_2O_3 supported superacid catalysts.
下载PDF
Influence of Microwave Radiation on Properties and Structure of Fe_2O_3/SO_4^(2-) Solid Superacid Catalyst
5
作者 Yinan NING (Kunming Institute of Precious Metals, Kunming 650221, China)Jiaqiang WANG and Pinjie HONG(Yunnan University, Kunming 650091, China) 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 1996年第4期307-311,共5页
The microwave radiation method was introduced to prepare the Fe_2O_3/SO solid superacid.Its structure and properties were investigated by means of X-ray diffraction and infrared spectrum analyses as well as measuremen... The microwave radiation method was introduced to prepare the Fe_2O_3/SO solid superacid.Its structure and properties were investigated by means of X-ray diffraction and infrared spectrum analyses as well as measurement of magnetic susceptibility and rate of esterification. The structure of the superacids prepared in microwave field can be crystalline or non-crystalline, the latter has not been reported yet in literatures. Comparing with the traditional superacid, the non-crystalline Fe2O3/SO superacid prepared in microwave field has the highest magnetic susceptibility and catalytic activity. The di-coordination of Fe2O3 and SO and the S=O bi-bond were reinforced by microwave radiation, which is favorable for increasing the acid intensity of the Fe2O3/SO catalyst 展开更多
关键词 SO Influence of Microwave Radiation on Properties and Structure of Fe2O3/SO4 Solid superacid catalyst FE
下载PDF
γ-Al<sub>2</sub>O<sub>3</sub>Supported SO<sub>4</sub><sup>2&#45</sup>/ZrO<sub>2</sub>Solid Superacid Catalysts for n-Pentane Isomerization 被引量:1
6
作者 Li Zhao Xiaoshuang Cheng +2 位作者 Ye Hu Shuqing Ma Yingjun Wang 《Modern Research in Catalysis》 2014年第3期89-93,共5页
A solid superacid catalyst Pt-SO42-/ZrO2-A12O3 for n-pentane isomerization, was prepared by incipient-wetness impregnation. Preparetion conditions, namely, calcination temperature, concentration of sulfuric acid solut... A solid superacid catalyst Pt-SO42-/ZrO2-A12O3 for n-pentane isomerization, was prepared by incipient-wetness impregnation. Preparetion conditions, namely, calcination temperature, concentration of sulfuric acid solution used in impregnation and Al2O3 concentration, were varied to investigate the effects on catalytic performance of Pt-SO42-/ZrO2-A12O3. The results showed that the PtSZA catalyst exhibited excellent catalytic performance for n-pentane isomerization. Under optimized preparation conditions of calcination temperature of 650°C, reaction time for 3 h, concentration of sulfuric acid solution for 0.5 mol/L, 30% of Al2O3 concentration and 0.3% of Pt concentration, the n-pentane conversion and isopentane selectivity of Pt-SO42-/ZrO2-A12O3 could reach up to 62.17% and 91.60%, respectively. 展开更多
关键词 SO42-/ZrO2 N-PENTANE ISOMERIZATION γ-Al2O3 SUPPORTED superacid catalysts
下载PDF
Friedel-Crafts Acylation of Ferrocene Catalyzed by Solid Superacid,Silica-supported Polytrifluoromethanesulfosiloxane 被引量:1
7
作者 RuiJueHU BaoGuoLI MinXU 《Chinese Chemical Letters》 SCIE CAS CSCD 2005年第2期183-185,共3页
关键词 Friedel-Crafts acylation FERROCENE solid superacid catalyst silica-supported polytri-fluoromethanesulfosiloxane.
下载PDF
Solid Superacid Catalyzed Efficient Synthesis of 2-Diethylaminoethyl Aryloxyacetates 被引量:2
8
作者 MingDeCHEN AnQiCHEN MinLIN ZhaoYingLI JinCHEN 《Chinese Chemical Letters》 SCIE CAS CSCD 2005年第2期197-200,共4页
Diethylaminoethyl aryloxyacetates are prepared efficiently in 75~95% yields bycondensation of the corresponding aryloxyacetic acids with 2-diethylaminoethanol in the presenceof catalytic amount of solid superacid SO4 ... Diethylaminoethyl aryloxyacetates are prepared efficiently in 75~95% yields bycondensation of the corresponding aryloxyacetic acids with 2-diethylaminoethanol in the presenceof catalytic amount of solid superacid SO4 /Fe2O3. 2- 展开更多
关键词 Solid superacid ESTERIFICATION diethylaminoethyl aryloxyacetate catalyst.
下载PDF
Catalysis of SO_4^(2-)-ZrO_2/TiO_2 nanometer solid superacid
9
作者 LU Wei-qi?1,2, Zhou Yang2, Liu Yi-lu1 1 Department of Chemistry, Foshan University, Foshan 528000 China 2 School of Material and Chemical Engineering,Southern Institute of Metallurgy,Ganzhou 341000 China 《合成化学》 CAS CSCD 2004年第z1期152-152,共1页
关键词 Solid superacid nano-catalyst ZrO2 TiO2
下载PDF
Pt-SO_(4)^(2-)/ZrO_(2)-Al_(2)O_(3)催化正己烷异构化反应动力学模型 被引量:1
10
作者 张孔远 崔孟达 +2 位作者 黄仁强 马亮 刘晨光 《石油学报(石油加工)》 EI CAS CSCD 北大核心 2023年第2期300-309,共10页
采用共沉淀法制备SO_(4)^(2-)/ZrO_(2)-Al_(2)O_(3),等体积浸渍法制备Pt-SO_(4)^(2-)/ZrO_(2)-Al_(2)O_(3)固体超强酸催化剂,采用5mL连续固定床反应装置评价了反应温度、反应压力、氢/油体积比和体积空速对Pt-SO_(4)^(2-)/ZrO_(2)-Al_(2... 采用共沉淀法制备SO_(4)^(2-)/ZrO_(2)-Al_(2)O_(3),等体积浸渍法制备Pt-SO_(4)^(2-)/ZrO_(2)-Al_(2)O_(3)固体超强酸催化剂,采用5mL连续固定床反应装置评价了反应温度、反应压力、氢/油体积比和体积空速对Pt-SO_(4)^(2-)/ZrO_(2)-Al_(2)O_(3)催化剂催化正己烷临氢异构化反应活性的影响。进行拟一级动力学模型验证,建立正己烷异构化一级反应网络动力学模型。结果表明:增加反应压力和体积空速,正己烷转化率降低;随着氢/油体积比、反应温度的升高,正己烷转化率提高。在180~200℃范围内,正己烷在Pt-SO_(4)^(2-)/ZrO_(2)-Al_(2)O_(3)催化剂上的临氢异构化反应可以视为简单拟一级可逆反应,反应活化能Ea为81.84kJ/mol,指前因子A为1.57×10^(9)h^(-1);建立的拟一级反应网络动力学模型与实验结果拟合较好,各步反应活化能在76~127kJ/mol之间。 展开更多
关键词 正己烷 固体超强酸催化剂 临氢异构化 动力学模型
下载PDF
Benzoylation of Toluene over Al-promoted SO42-/MxOy(M=Zr,Ti,Fe) Catalysts
11
《Chemical Research in Chinese Universities》 SCIE CAS CSCD 1999年第2期96-98,共3页
ThebenzoylationoftoluenewithbenzoylchlorideisanimportantacidcatalyticFriedalCraftsreaction.Lewisacids,suchas... ThebenzoylationoftoluenewithbenzoylchlorideisanimportantacidcatalyticFriedalCraftsreaction.Lewisacids,suchasdehydratedAlCl3an... 展开更多
关键词 Benzoylation of toluene Alpromoted catalysts superacidity
下载PDF
Pt-SO_(4)^(2-)/ZrO_(2)-WO_(3)固体超强酸催化剂的制备及其异构化性能评价 被引量:1
12
作者 张孔远 崔孟达 +2 位作者 马亮 黄仁强 刘晨光 《石油学报(石油加工)》 EI CAS CSCD 北大核心 2023年第3期508-516,共9页
在Pt-SO_(4)^(2-)/ZrO_(2)固体超强酸中引入WO_(3)制备了Pt-SO_(4)^(2-)/ZrO_(2)-WO_(3)固体超强酸催化剂,采用N 2吸附-脱附、XRD、TPD、TPR和Py-IR等手段对所制备催化剂进行了分析表征;在5 mL连续固定床反应装置上,考察了WO_(3)含量对P... 在Pt-SO_(4)^(2-)/ZrO_(2)固体超强酸中引入WO_(3)制备了Pt-SO_(4)^(2-)/ZrO_(2)-WO_(3)固体超强酸催化剂,采用N 2吸附-脱附、XRD、TPD、TPR和Py-IR等手段对所制备催化剂进行了分析表征;在5 mL连续固定床反应装置上,考察了WO_(3)含量对Pt-SO_(4)^(2-)/ZrO_(2)-WO_(3)催化剂作用下正己烷临氢异构化反应活性的影响。结果表明:WO_(3)的引入能够显著调节Pt-SO_(4)^(2-)/ZrO_(2)-WO_(3)催化剂中四方晶相ZrO_(2)含量、比表面积、孔体积、平均孔径和酸量等,使暴露在催化剂表面的活性中心明显增加;在反应温度240℃、反应压力2.0 MPa、体积空速1.0 h-1、氢气/正己烷体积比600的条件下,WO_(3)质量分数16%的Pt-SO_(4)^(2-)/ZrO_(2)-WO_(3)催化剂的异构化活性最高,正己烷转化率为82.27%,异构化率为81.32%,二甲基丁烷选择性为34.28%。 展开更多
关键词 正己烷 固体超强酸 Pt-SO_(4)^(2-)/ZrO_(2)-WO_(3)催化剂 临氢异构化
下载PDF
固体超强酸C_(5)/C_(6)异构化催化剂RISO-C的开发及工业应用 被引量:3
13
作者 刘洪全 于中伟 +2 位作者 张秋平 孙义兰 任坚强 《石油炼制与化工》 CAS CSCD 北大核心 2023年第2期1-8,共8页
采用水热法合成了细晶粒氢氧化锆,并以其为基元制备了高比表面积Pt/SO42--ZrO2催化剂,通过氧化铝改性进一步提高了Pt/SO42--ZrO2的酸性和热稳定性,开发出高活性、高选择性、高稳定性并具有优异再生性能的固体超强酸C5/C6异构化催化剂RIS... 采用水热法合成了细晶粒氢氧化锆,并以其为基元制备了高比表面积Pt/SO42--ZrO2催化剂,通过氧化铝改性进一步提高了Pt/SO42--ZrO2的酸性和热稳定性,开发出高活性、高选择性、高稳定性并具有优异再生性能的固体超强酸C5/C6异构化催化剂RISO-C,并将其应用于国内首套固体超强酸C5/C6异构化工业装置上。工业应用结果表明,以催化重整拔头油为原料,在反应器入口温度为170℃、气液分离罐压力为1.5 MPa、原料质量空速为1.26 h^(-1)、氢/油摩尔比为1.95的反应条件下,RISO-C催化剂具有优异的异构化活性和稳定性,C5异构化率高于70%,C6异构化率高于85%,异构化稳定汽油的研究法辛烷值(RON)达到85,应用前景良好。 展开更多
关键词 固体超强酸 催化剂 C_(5)/C_(6) 异构化 氧化锆 氧化铝
下载PDF
射频等离子体辅助制备S_(2)O_(8)^(2-)/CeO_(2)固体超强酸催化剂的研究 被引量:1
14
作者 王凯强 张旭东 +5 位作者 许德鑫 黄邦斗 朱长辉 田保河 李秀兰 朱文超 《现代化工》 CAS CSCD 北大核心 2023年第9期189-193,199,共6页
以商用CeO_(2)为载体,采用过量浸渍法浸渍(NH_(4))_(2)S_(2)O_(8)溶液,用射频等离子体以辉光放电形式辅助制备了S_(2)O_(8)^(2-)/CeO_(2)-RF固体超强酸催化剂。利用XRD、SEM、BET、FT-IR、Py-IR等对催化剂的孔结构、键结合方式、微观形... 以商用CeO_(2)为载体,采用过量浸渍法浸渍(NH_(4))_(2)S_(2)O_(8)溶液,用射频等离子体以辉光放电形式辅助制备了S_(2)O_(8)^(2-)/CeO_(2)-RF固体超强酸催化剂。利用XRD、SEM、BET、FT-IR、Py-IR等对催化剂的孔结构、键结合方式、微观形貌、酸量及酸性质等进行了表征。通过色氨酸与甲醇的酯化反应评价了S_(2)O_(8)^(2-)/CeO_(2)-RF固体超强酸催化剂的活性。结果表明,与传统600℃焙烧法相比,射频辉光放电等离子体辅助制备的催化剂比表面积大、颗粒分散、酸量高、反应速率快。在反应温度为150℃、反应压力为1 MPa的条件下,S_(2)O_(8)^(2-)/CeO_(2)-RF催化剂上色氨酸甲酯的产率为82%,并且在1.5 h后反应趋近平衡。 展开更多
关键词 射频等离子体 固体超强酸催化剂 氧化铈 酯化反应 色氨酸甲酯
下载PDF
稀土复合固体超强酸SO_(4)^(2-)/ZrO_(2)-MoO_(3)-Yb_(2)O_(3)催化合成乙酸异龙脑酯的研究
15
作者 吴瑾 卢晓春 吴粦华 《广东化工》 CAS 2023年第21期42-44,共3页
通过沉淀-浸渍方法制备稀土复合固体超强酸SO_(4)^(2-)/ZrO_(2)-MO_(3)-Yb_(2)O_(3),加入稀土元素Yb以改良固体超强酸的性能,通过Hammett酸指示剂法检测固体酸的酸强度。以莰烯和乙酸为原料,由自制的固体超强酸催化合成乙酸异龙脑酯。通... 通过沉淀-浸渍方法制备稀土复合固体超强酸SO_(4)^(2-)/ZrO_(2)-MO_(3)-Yb_(2)O_(3),加入稀土元素Yb以改良固体超强酸的性能,通过Hammett酸指示剂法检测固体酸的酸强度。以莰烯和乙酸为原料,由自制的固体超强酸催化合成乙酸异龙脑酯。通过CG-MS对酯含量进行测定,研究了催化剂用量、MoO_(3)/ZrO_(2)、焙烧温度、反应时间和反应温度等对酯化率的影响。结果表明:经600℃焙烧的MoO_(3)/ZrO_(2)为8%的催化剂,在其用量占总反应物的质量分数为3%,反应温度80℃,反应时间6 h的条件下,酯化率可达到76%。 展开更多
关键词 莰烯 乙酸 稀土复合固体超强酸 催化剂 酯化 乙酸异龙脑酯
下载PDF
固体超强酸C_(5)\C_(6)异构化技术工业应用实例
16
作者 刘洪全 于中伟 +2 位作者 张秋平 孙义兰 任坚强 《石油炼制与化工》 CAS CSCD 北大核心 2023年第10期52-57,共6页
中石化石油化工科学研究院有限公司开发的固体超强酸C_(5)\C_(6)异构化成套技术以PtSO_(4)^(2-)-ZrO_(2)型催化剂RISO-C及配套的开工、异构化反应、原料预处理和催化剂再生等单元技术构成,其工业应用实例表明:该成套技术适应性强,既可... 中石化石油化工科学研究院有限公司开发的固体超强酸C_(5)\C_(6)异构化成套技术以PtSO_(4)^(2-)-ZrO_(2)型催化剂RISO-C及配套的开工、异构化反应、原料预处理和催化剂再生等单元技术构成,其工业应用实例表明:该成套技术适应性强,既可应用于改造装置,也可应用于新建装置,并可与分离技术结合,进一步提高异构化产品的辛烷值,可以生产研究法辛烷值为80~90的异构化油,满足不同用户的需求,是汽油标准升级的重要支撑技术。 展开更多
关键词 固体超强酸 催化剂 C_(5)\C_(6) 异构化 正构烷烃
下载PDF
半再生重整装置改造为固体超强酸C_(5)/C_(6)异构化装置工业实践
17
作者 陈家岭 刘洪全 +5 位作者 兰勇 张会兵 于中伟 张欣 苏燕飞 梁尚坤 《石油炼制与化工》 CAS CSCD 北大核心 2023年第10期58-64,共7页
为生产符合国ⅥB汽油标准的高辛烷值汽油,某炼油厂采用中石化石油化工科学研究院有限公司开发的固体超强酸C_(5)/C_(6)异构化催化剂及配套工艺技术,将闲置的190 kt a半再生催化重整装置技改为C_(5)/C_(6)异构化装置,加工富含苯和C 7的... 为生产符合国ⅥB汽油标准的高辛烷值汽油,某炼油厂采用中石化石油化工科学研究院有限公司开发的固体超强酸C_(5)/C_(6)异构化催化剂及配套工艺技术,将闲置的190 kt a半再生催化重整装置技改为C_(5)/C_(6)异构化装置,加工富含苯和C 7的重整拔头油。工业实践结果表明:将半再生催化重整装置改造为固体超强酸C_(5)/C_(6)异构化装置不但在技术上可行,且装置利旧率高、投资低;在水含量合格的条件下,即使加工苯质量分数高达4%~8%、C 7质量分数高达10%~18%的C_(5)/C_(6)异构化原料,RISO-C仍具有优异的异构化活性和稳定性,同时具有较好的苯加氢活性,使异构化汽油研究法辛烷值增加4~8,达到82以上,且苯质量分数低于0.8%;将固体超强酸C_(5)/C_(6)异构化装置与C 7+重整装置配合,可降低重整汽油苯含量,生产符合国ⅥB汽油标准的高辛烷值汽油,具有显著的经济效益和社会效益。 展开更多
关键词 C_(5)/C_(6)烷烃 异构化 RISO-C 固体超强酸催化剂 辛烷值
下载PDF
SO_4^(2-)/M_xO_y型固体超强酸催化剂的研究进展 被引量:49
18
作者 宋华 杨东明 +2 位作者 李锋 刘全夫 徐骞 《化工进展》 EI CAS CSCD 北大核心 2007年第2期145-151,共7页
概述了SO42-/MxOy型固体超强酸催化剂的催化机理;分析比较了纳米技术法、低温陈化法、沉淀–混合共沉淀浸渍法、浓硫酸活化钛白粉法等制备出的催化剂对催化性能的影响;介绍了催化剂载体改性、引入金属或离子、促进剂等改性方面的研究进... 概述了SO42-/MxOy型固体超强酸催化剂的催化机理;分析比较了纳米技术法、低温陈化法、沉淀–混合共沉淀浸渍法、浓硫酸活化钛白粉法等制备出的催化剂对催化性能的影响;介绍了催化剂载体改性、引入金属或离子、促进剂等改性方面的研究进展;展望了固体超强酸催化剂的研究和应用前景。 展开更多
关键词 SO4^2-/MxOy 固体超强酸 催化剂 制备 改性
下载PDF
SO_4^(2-)/ZrO_2超强酸催化剂的结构表征 被引量:26
19
作者 曾健青 钟炳 +2 位作者 罗庆云 王琴 吴东 《石油化工》 CAS CSCD 北大核心 1994年第11期720-726,共7页
用BET法分析了制备条件对SO_4 ̄(2-)/ZrO_2超强酸催化剂的比表面和孔结构的影响,用SEM观察了催化剂的表面形貌。结果表明,引人SO_4 ̄(2-)后催化剂的比表面和比表面的热稳定性都增大了,在H_2SO_4... 用BET法分析了制备条件对SO_4 ̄(2-)/ZrO_2超强酸催化剂的比表面和孔结构的影响,用SEM观察了催化剂的表面形貌。结果表明,引人SO_4 ̄(2-)后催化剂的比表面和比表面的热稳定性都增大了,在H_2SO_4浓度为1.0mol/1和焙烧温度约773K时催化剂的比表面较大。制备Zr(OH)_4时用浓氨水得到的催化剂的比表面、平均孔径和孔体积都较大。SO_4 ̄(2-)/ZrO_2催化剂的孔为平均孔径3-5nm的中孔。SEM结果表明,SO_4 ̄(2-)/ZrO_2催化剂的表面为很不平整的蜂窝状。 展开更多
关键词 硫酸根 二氧化锆 超强酸 结构 催化剂
下载PDF
SO_4^(2-)/ZrO_2对萘齐聚反应的催化效应 被引量:25
20
作者 胡子君 凌立成 +2 位作者 吕春祥 刘朗 张碧江 《催化学报》 SCIE CAS CSCD 北大核心 1998年第5期447-450,共4页
详细考察了催化剂制备条件和反应条件对萘转化率的影响.结果表明,催化剂的Lewis酸强度是影响萘转化率的主要因素,酸量和反应条件对萘齐聚反应也有相当大的影响.与非催化的萘高温缩聚反应相比,SO2-4/ZrO2催化下萘的... 详细考察了催化剂制备条件和反应条件对萘转化率的影响.结果表明,催化剂的Lewis酸强度是影响萘转化率的主要因素,酸量和反应条件对萘齐聚反应也有相当大的影响.与非催化的萘高温缩聚反应相比,SO2-4/ZrO2催化下萘的齐聚反应具有很大的优越性. 展开更多
关键词 硫酸 二氧化锆 固体超强酸 催化剂 齐聚反应
下载PDF
上一页 1 2 19 下一页 到第
使用帮助 返回顶部