The supercritical CO_(2) Brayton cycle is considered a promising energy conversion system for Generation IV reactors for its simple layout,compact structure,and high cycle efficiency.Mathematical models of four Brayto...The supercritical CO_(2) Brayton cycle is considered a promising energy conversion system for Generation IV reactors for its simple layout,compact structure,and high cycle efficiency.Mathematical models of four Brayton cycle layouts are developed in this study for different reactors to reduce the cost and increase the thermohydraulic performance of nuclear power generation to promote the commercialization of nuclear energy.Parametric analysis,multi-objective optimizations,and four decision-making methods are applied to obtain each Brayton scheme’s optimal thermohydraulic and economic indexes.Results show that for the same design thermal power scale of reactors,the higher the core’s exit temperature,the better the Brayton cycle’s thermo-economic performance.Among the four-cycle layouts,the recompression cycle(RC)has the best overall performance,followed by the simple recuperation cycle(SR)and the intercooling cycle(IC),and the worst is the reheating cycle(RH).However,RH has the lowest total cost of investment(C_(tot))of$1619.85 million,and IC has the lowest levelized cost of energy(LCOE)of 0.012$/(kWh).The nuclear Brayton cycle system’s overall performance has been improved due to optimization.The performance of the molten salt reactor combined with the intercooling cycle(MSR-IC)scheme has the greatest improvement,with the net output power(W_(net)),thermal efficiencyη_(t),and exergy efficiency(η_(e))improved by 8.58%,8.58%,and 11.21%,respectively.The performance of the lead-cooled fast reactor combined with the simple recuperation cycle scheme was optimized to increase C_(tot) by 27.78%.In comparison,the internal rate of return(IRR)increased by only 7.8%,which is not friendly to investors with limited funds.For the nuclear Brayton cycle,the molten salt reactor combined with the recompression cycle scheme should receive priority,and the gas-cooled fast reactor combined with the reheating cycle scheme should be considered carefully.展开更多
In recent years, there has been global interest in meeting targets relating to energy affordability and security while taking into account greenhouse gas emissions. This has heightened major interest in potential inve...In recent years, there has been global interest in meeting targets relating to energy affordability and security while taking into account greenhouse gas emissions. This has heightened major interest in potential investigations into the use of supercritical carbon dioxide (sCO2) power cycles. Climate change mitigation is the ultimate driver for this increased interest;other relevant issues include the potential for high cycle efficiency and a circular economy. In this study, a 25 MWe recompression closed Brayton cycle (RCBC) has been assessed, and sCO2 has been proposed as the working fluid for the power plant. The methodology used in this research work comprises thermodynamic and techno-economic analysis for the prospective commercialization of this sCO2 power cycle. An evaluated estimation of capital expenditure, operational expenditure, and cost of electricity has been considered in this study. The ASPEN Plus simulation results have been compared with theoretical and mathematical calculations to assess the performance of the compressors, turbine, and heat exchangers. The results thus reveal that the cycle efficiency for this prospective sCO2 recompression closed Brayton cycle increases (39% - 53.6%) as the temperature progressively increases from 550˚C to 900˚C. Data from the Aspen simulation model was used to aid the cost function calculations to estimate the total capital investment cost of the plant. Also, the techno-economic results have shown less cost for purchasing equipment due to fewer components being required for the cycle configuration as compared to the conventional steam power plant.展开更多
A supercritical CO2 gas turbine cycle can produce power at high efficiency and the gas turbine is compact compared with the steam turbine. Therefore, it is very advantageous power cycle for the medium temperature rang...A supercritical CO2 gas turbine cycle can produce power at high efficiency and the gas turbine is compact compared with the steam turbine. Therefore, it is very advantageous power cycle for the medium temperature range less than 650 ℃. The purpose of this paper is to show how it can be effectively applied not only to the nuclear power but also to the fossil fired power plant. A design of 300 MWe plant has been carried out, where thermal energy of flue gas leaving a CO2 heater is utilized effectively by means of economizer and a high cycle thermal efficiency of 43.4 % has been achieved. Since the temperature and the pressure difference of the CO2 heater are very high, the structural design becomes very difficult. It is revealed that this problem can be effectively solved by introducing a double expansion turbine cycle. The component designs of the CO2 heater, the economizer, supercritical CO2 turbines, compressors and the recuperators are given and it is shown that these components have good performances and compact sizes.展开更多
Using the efficient,space-saving,and flexible supercritical carbon dioxide(sCO_(2)) Brayton cycle is a promising approach for improving the performance of nuclear-powered ships.The purpose of this paper is to design a...Using the efficient,space-saving,and flexible supercritical carbon dioxide(sCO_(2)) Brayton cycle is a promising approach for improving the performance of nuclear-powered ships.The purpose of this paper is to design and compare sCO_(2) cycle power systems suitable for nuclear-powered ships.Considering the characteristics of nuclear-powered ships,this paper uses different indicators to comprehensively evaluate the efficiency,cost,volume,and partial load performance of several nuclear-powered sCO_(2) cycles.Four load-following strategies are also designed and compared.The results show that the partial cooling cycle is most suitable for nuclear-powered ships because it offers both high thermal efficiency and low volume and cost,and can maintain relatively high thermal efficiency at partial loads.Additionally,the new load-following strategy that adjusts the turbine speed can keep the compressor away from the surge line,making the cycle more flexible and efficient compared to traditional inventory and turbine bypass strategies.展开更多
In order to reduce the environmental impact of conventional sludge treatment methods and to utilize the energy in sludge more effectively,a coupled system based on sewage sludge gasifier(SSG),solid oxide fuel cells(SO...In order to reduce the environmental impact of conventional sludge treatment methods and to utilize the energy in sludge more effectively,a coupled system based on sewage sludge gasifier(SSG),solid oxide fuel cells(SOFC),supercritical CO_(2)cycle(S-CO_(2)),and organic Rankine cycle(ORC)is proposed.The clean syngas obtained from sludge gasification is mixed with CH4 and then first utilized by the fuel cell.The exhaust gas from the fuel cell is fully combusted in the afterburning chamber and then enters the bottom cycle system consisting of S-CO_(2)&ORC to generate electricity.To understand the performance of the system,thermodynamic and economic analyses were conducted to examine the project's performance.The thermodynamics as well as the economics of the coupled system were analyzed to arrive at the following conclusions,the power production of the system is 37.34 MW;the exergy efficiency is 55.62%,and the net electrical efficiency is 61.48%.The main exergy destruction is the gasifier and SOFC,accounting for 62.45%of the total exergy destruction.It takes only6.13 years to repay the construction investment in the novel system,and the project obtains a NPV of 17723820USD during 20 years lifetime.The above findings indicate that the new coupled system has a better performance in terms of energy utilization and economy.展开更多
Technologies for utilizing waste heat for power generation have attracted significant attention in recent years due to their potential to enhance energy efficiency and reduce greenhouse gas emissions.This research foc...Technologies for utilizing waste heat for power generation have attracted significant attention in recent years due to their potential to enhance energy efficiency and reduce greenhouse gas emissions.This research focuses on the comparative and optimization analysis of three supercritical carbon dioxide(sCO_(2))Rankine cycles(simple,cascade,and split)for gas turbine waste heat recuperation.The study begins with parametric analysis,investigating the significant effects of key variables,including turbine inlet temperature,condenser inlet temperature,and pinch point temperature,on the thermal performance of advanced sCO_(2) power cycles.To identify the most efficient cycle configuration,a multi-objective optimization approach is employed.This approach combines a Genetic Algorithm with machine learning regression models(Random Forest,XGBoost,Artificial Neural Network,Ridge Regression,and K-Nearest Neighbors)to predict cycle performance using a dataset extracted from cycle simulations.The decision-making process for determining the optimal cycle configuration is facilitated by the TOPSIS(technique for order of preference by similarity to the ideal solution)method.The study's major findings reveal that the split cycle outperforms the simple and cascade configurations in terms of power generation across various operating conditions.The optimized split cycle not only demonstrates superior power output but also exhibits enhanced net power output,heat recovery,system and exergy efficiency of 7.99 MW,76.17%,26.86%and 57.96%,respectively,making it a promising choice for waste heat recovery applications.This research has the potential to contribute to the advancement and widespread adoption of waste heat recovery in energy technologies boosting system efficiency and economic feasibility.It provides a new perspective for future research,contributing to the improvement of energy generation infrastructure.展开更多
The supercritical CO_(2)(S-CO_(2)) Brayton cycle is expected to replace steam cycle in the application of solar power tower system due to the attractive potential to improve efficiency and reduce costs.Since the conce...The supercritical CO_(2)(S-CO_(2)) Brayton cycle is expected to replace steam cycle in the application of solar power tower system due to the attractive potential to improve efficiency and reduce costs.Since the concentrated solar power plant with thermal energy storage is usually located in drought area and used to provide a dispatchable power output,the S-CO_(2) Brayton cycle has to operate under fluctuating ambient temperature and diverse power demand scenarios.In addition,the cycle design condition will directly affect the off-design performance.In this work,the combined effects of design condition,and distributions of ambient temperature and power demand on the cycle operating performance are analyzed,and the off-design performance maps are proposed for the first time.A cycle design method with feedback mechanism of operating performance under varied ambient temperature and power demand is introduced innovatively.Results show that the low design value of compressor inlet temperature is not conductive to efficient operation under low loads and sufficient output under high ambient temperatures.The average yearly efficiency is most affected by the average power demand,while the load cover factor is significantly influenced by the average ambient temperature.With multi-objective optimization,the optimal solution of designed compressor inlet temperature is close to the minimum value of35℃ in Delingha with low ambient temperature,while reaches 44.15℃ in Daggett under the scenario of high ambient temperature,low average power demand,long duration and large value of peak load during the peak temperature period.If the cycle designed with compressor inlet temperature of 35℃ instead of 44.15℃ in Daggett under light industry power demand,the reduction of load cover factor will reach 0.027,but the average yearly efficiency can barely be improved.展开更多
Based on a constructal theory,the structure design of a printed circuit recuperator with a semicircular heat transfer channel for supercritical CO_(2)cycle is carried out.First,a complex function composed of weighted ...Based on a constructal theory,the structure design of a printed circuit recuperator with a semicircular heat transfer channel for supercritical CO_(2)cycle is carried out.First,a complex function composed of weighted sum of the reciprocal of total heat transfer rate and total pumping power consumption is regarded as an optimization objective,and total volumes of the recuperator and heat transfer channel are regarded as constraints.The optimal heat transfer channel radius and minimum complex function of the recuperator are obtained.It turns out that heat transfer rate,pumping power consumption,and complex function under the optimal construct of recuperator are reduced by 15.10%,82.44%,and 32.33%,respectively.There exists the optimal single plate channel number which results in the double minimum complex function.Second,for the purpose of minimizing the reciprocal of heat transfer rate and pumping power consumption,NSGA-II algorithm is used to achieve multi-objective optimization,and the minimum deviation index derived by the decision-making methods is 0.076,which can be taken as multi-objective optimal design scheme for printed circuit recuperator with semicircular heat transfer channels.The findings presented here can serve as theoretical recommendations for the structure design of printed circuit recuperator.展开更多
基金This work was supported of National Natural Science Foundation of China Fund(No.52306033)State Key Laboratory of Engines Fund(No.SKLE-K2022-07)the Jiangxi Provincial Postgraduate Innovation Special Fund(No.YC2022-s513).
文摘The supercritical CO_(2) Brayton cycle is considered a promising energy conversion system for Generation IV reactors for its simple layout,compact structure,and high cycle efficiency.Mathematical models of four Brayton cycle layouts are developed in this study for different reactors to reduce the cost and increase the thermohydraulic performance of nuclear power generation to promote the commercialization of nuclear energy.Parametric analysis,multi-objective optimizations,and four decision-making methods are applied to obtain each Brayton scheme’s optimal thermohydraulic and economic indexes.Results show that for the same design thermal power scale of reactors,the higher the core’s exit temperature,the better the Brayton cycle’s thermo-economic performance.Among the four-cycle layouts,the recompression cycle(RC)has the best overall performance,followed by the simple recuperation cycle(SR)and the intercooling cycle(IC),and the worst is the reheating cycle(RH).However,RH has the lowest total cost of investment(C_(tot))of$1619.85 million,and IC has the lowest levelized cost of energy(LCOE)of 0.012$/(kWh).The nuclear Brayton cycle system’s overall performance has been improved due to optimization.The performance of the molten salt reactor combined with the intercooling cycle(MSR-IC)scheme has the greatest improvement,with the net output power(W_(net)),thermal efficiencyη_(t),and exergy efficiency(η_(e))improved by 8.58%,8.58%,and 11.21%,respectively.The performance of the lead-cooled fast reactor combined with the simple recuperation cycle scheme was optimized to increase C_(tot) by 27.78%.In comparison,the internal rate of return(IRR)increased by only 7.8%,which is not friendly to investors with limited funds.For the nuclear Brayton cycle,the molten salt reactor combined with the recompression cycle scheme should receive priority,and the gas-cooled fast reactor combined with the reheating cycle scheme should be considered carefully.
文摘In recent years, there has been global interest in meeting targets relating to energy affordability and security while taking into account greenhouse gas emissions. This has heightened major interest in potential investigations into the use of supercritical carbon dioxide (sCO2) power cycles. Climate change mitigation is the ultimate driver for this increased interest;other relevant issues include the potential for high cycle efficiency and a circular economy. In this study, a 25 MWe recompression closed Brayton cycle (RCBC) has been assessed, and sCO2 has been proposed as the working fluid for the power plant. The methodology used in this research work comprises thermodynamic and techno-economic analysis for the prospective commercialization of this sCO2 power cycle. An evaluated estimation of capital expenditure, operational expenditure, and cost of electricity has been considered in this study. The ASPEN Plus simulation results have been compared with theoretical and mathematical calculations to assess the performance of the compressors, turbine, and heat exchangers. The results thus reveal that the cycle efficiency for this prospective sCO2 recompression closed Brayton cycle increases (39% - 53.6%) as the temperature progressively increases from 550˚C to 900˚C. Data from the Aspen simulation model was used to aid the cost function calculations to estimate the total capital investment cost of the plant. Also, the techno-economic results have shown less cost for purchasing equipment due to fewer components being required for the cycle configuration as compared to the conventional steam power plant.
文摘A supercritical CO2 gas turbine cycle can produce power at high efficiency and the gas turbine is compact compared with the steam turbine. Therefore, it is very advantageous power cycle for the medium temperature range less than 650 ℃. The purpose of this paper is to show how it can be effectively applied not only to the nuclear power but also to the fossil fired power plant. A design of 300 MWe plant has been carried out, where thermal energy of flue gas leaving a CO2 heater is utilized effectively by means of economizer and a high cycle thermal efficiency of 43.4 % has been achieved. Since the temperature and the pressure difference of the CO2 heater are very high, the structural design becomes very difficult. It is revealed that this problem can be effectively solved by introducing a double expansion turbine cycle. The component designs of the CO2 heater, the economizer, supercritical CO2 turbines, compressors and the recuperators are given and it is shown that these components have good performances and compact sizes.
基金supported by the National Natural Science Foundation of China (52276150)。
文摘Using the efficient,space-saving,and flexible supercritical carbon dioxide(sCO_(2)) Brayton cycle is a promising approach for improving the performance of nuclear-powered ships.The purpose of this paper is to design and compare sCO_(2) cycle power systems suitable for nuclear-powered ships.Considering the characteristics of nuclear-powered ships,this paper uses different indicators to comprehensively evaluate the efficiency,cost,volume,and partial load performance of several nuclear-powered sCO_(2) cycles.Four load-following strategies are also designed and compared.The results show that the partial cooling cycle is most suitable for nuclear-powered ships because it offers both high thermal efficiency and low volume and cost,and can maintain relatively high thermal efficiency at partial loads.Additionally,the new load-following strategy that adjusts the turbine speed can keep the compressor away from the surge line,making the cycle more flexible and efficient compared to traditional inventory and turbine bypass strategies.
基金supported by the National Nature Science Fund of China(No.52276006)Science Fund for Creative Research Groups of the National Natural Science Foundation of China(No.51821004)。
文摘In order to reduce the environmental impact of conventional sludge treatment methods and to utilize the energy in sludge more effectively,a coupled system based on sewage sludge gasifier(SSG),solid oxide fuel cells(SOFC),supercritical CO_(2)cycle(S-CO_(2)),and organic Rankine cycle(ORC)is proposed.The clean syngas obtained from sludge gasification is mixed with CH4 and then first utilized by the fuel cell.The exhaust gas from the fuel cell is fully combusted in the afterburning chamber and then enters the bottom cycle system consisting of S-CO_(2)&ORC to generate electricity.To understand the performance of the system,thermodynamic and economic analyses were conducted to examine the project's performance.The thermodynamics as well as the economics of the coupled system were analyzed to arrive at the following conclusions,the power production of the system is 37.34 MW;the exergy efficiency is 55.62%,and the net electrical efficiency is 61.48%.The main exergy destruction is the gasifier and SOFC,accounting for 62.45%of the total exergy destruction.It takes only6.13 years to repay the construction investment in the novel system,and the project obtains a NPV of 17723820USD during 20 years lifetime.The above findings indicate that the new coupled system has a better performance in terms of energy utilization and economy.
文摘Technologies for utilizing waste heat for power generation have attracted significant attention in recent years due to their potential to enhance energy efficiency and reduce greenhouse gas emissions.This research focuses on the comparative and optimization analysis of three supercritical carbon dioxide(sCO_(2))Rankine cycles(simple,cascade,and split)for gas turbine waste heat recuperation.The study begins with parametric analysis,investigating the significant effects of key variables,including turbine inlet temperature,condenser inlet temperature,and pinch point temperature,on the thermal performance of advanced sCO_(2) power cycles.To identify the most efficient cycle configuration,a multi-objective optimization approach is employed.This approach combines a Genetic Algorithm with machine learning regression models(Random Forest,XGBoost,Artificial Neural Network,Ridge Regression,and K-Nearest Neighbors)to predict cycle performance using a dataset extracted from cycle simulations.The decision-making process for determining the optimal cycle configuration is facilitated by the TOPSIS(technique for order of preference by similarity to the ideal solution)method.The study's major findings reveal that the split cycle outperforms the simple and cascade configurations in terms of power generation across various operating conditions.The optimized split cycle not only demonstrates superior power output but also exhibits enhanced net power output,heat recovery,system and exergy efficiency of 7.99 MW,76.17%,26.86%and 57.96%,respectively,making it a promising choice for waste heat recovery applications.This research has the potential to contribute to the advancement and widespread adoption of waste heat recovery in energy technologies boosting system efficiency and economic feasibility.It provides a new perspective for future research,contributing to the improvement of energy generation infrastructure.
基金supported by Beijing Natural Science Foundation (Grant No.3202014)。
文摘The supercritical CO_(2)(S-CO_(2)) Brayton cycle is expected to replace steam cycle in the application of solar power tower system due to the attractive potential to improve efficiency and reduce costs.Since the concentrated solar power plant with thermal energy storage is usually located in drought area and used to provide a dispatchable power output,the S-CO_(2) Brayton cycle has to operate under fluctuating ambient temperature and diverse power demand scenarios.In addition,the cycle design condition will directly affect the off-design performance.In this work,the combined effects of design condition,and distributions of ambient temperature and power demand on the cycle operating performance are analyzed,and the off-design performance maps are proposed for the first time.A cycle design method with feedback mechanism of operating performance under varied ambient temperature and power demand is introduced innovatively.Results show that the low design value of compressor inlet temperature is not conductive to efficient operation under low loads and sufficient output under high ambient temperatures.The average yearly efficiency is most affected by the average power demand,while the load cover factor is significantly influenced by the average ambient temperature.With multi-objective optimization,the optimal solution of designed compressor inlet temperature is close to the minimum value of35℃ in Delingha with low ambient temperature,while reaches 44.15℃ in Daggett under the scenario of high ambient temperature,low average power demand,long duration and large value of peak load during the peak temperature period.If the cycle designed with compressor inlet temperature of 35℃ instead of 44.15℃ in Daggett under light industry power demand,the reduction of load cover factor will reach 0.027,but the average yearly efficiency can barely be improved.
基金supported by the National Natural Science Foundation of China(Grant Nos.52171317 and 51779262).
文摘Based on a constructal theory,the structure design of a printed circuit recuperator with a semicircular heat transfer channel for supercritical CO_(2)cycle is carried out.First,a complex function composed of weighted sum of the reciprocal of total heat transfer rate and total pumping power consumption is regarded as an optimization objective,and total volumes of the recuperator and heat transfer channel are regarded as constraints.The optimal heat transfer channel radius and minimum complex function of the recuperator are obtained.It turns out that heat transfer rate,pumping power consumption,and complex function under the optimal construct of recuperator are reduced by 15.10%,82.44%,and 32.33%,respectively.There exists the optimal single plate channel number which results in the double minimum complex function.Second,for the purpose of minimizing the reciprocal of heat transfer rate and pumping power consumption,NSGA-II algorithm is used to achieve multi-objective optimization,and the minimum deviation index derived by the decision-making methods is 0.076,which can be taken as multi-objective optimal design scheme for printed circuit recuperator with semicircular heat transfer channels.The findings presented here can serve as theoretical recommendations for the structure design of printed circuit recuperator.
