A supercritical CO2 extraction behavior of Eucalyptus oil was investigated under different conditions of pressure, temperature and time with or without cosolvent. The pressure range was from 8 to 25 MPa, temperature f...A supercritical CO2 extraction behavior of Eucalyptus oil was investigated under different conditions of pressure, temperature and time with or without cosolvent. The pressure range was from 8 to 25 MPa, temperature from 35 to 55°C and CO2 flow rate from 10 to 26 g/min. For 1,8-cineole the appropriate extracting pressure was 15 MPa and temperature was 45°C. When CO2 flow rate was 18 g/min, it was benefit to extract the other three substances (limonene, p-cymene and γ-terpinene, respectively) except 1,8-cineole. Prolonging extraction time could not obviously increase the extract concentration, but the extract yield would increase. The results also indicated that ethanol as a modifier could improve extraction velocity and extraction concentration.展开更多
The present work presents a first characterization of the oil from the Moringa (Moringa oleifera) kernel as a potential candidate for biodiesel production. Moringa is an indigenous tree in the Yucatan Peninsula in Mex...The present work presents a first characterization of the oil from the Moringa (Moringa oleifera) kernel as a potential candidate for biodiesel production. Moringa is an indigenous tree in the Yucatan Peninsula in Mexico, where there is a nascent biodiesel industry. Several extraction methods are compared in terms of the extraction yields, including solvent extraction (n-hexane and ethanol), and supercritical extraction (Sc-CO2). The results are also compared against previ- ously reported data. For supercritical extraction pressures of 200 to 400 bar and temperatures of 40℃ and 60℃ were tested. Gas Chromatography analysis reveals that the main fatty acids in Moringa oil are oleic acid (69%), palmitic acid (10%), and stearic acid (8%).展开更多
Announcement from Editorial Board ? The following article has been retracted due to special reason of the authors. This paper published in Vol.2 No. 3, 2012, has been removed from this site. ? Title: Supercritical Flu...Announcement from Editorial Board ? The following article has been retracted due to special reason of the authors. This paper published in Vol.2 No. 3, 2012, has been removed from this site. ? Title: Supercritical Fluid Extraction of Uncrushed Jordanian Olives Authors: Awni Al-Otoom, Sameer Al-Asheh, Mamdouh Allawzi, Khalid Mahshi, Nahawand Alzenati, Bader Banat, Bdour Alnimr ? ACES Editorial Board? May 19,展开更多
The rheological analysis on dynamic shear rate-viscosity relationship of tea-oil extracted from tea-oil tree seeds by supercritical extraction method was carried out at gradient temperatures and constant shear rate,re...The rheological analysis on dynamic shear rate-viscosity relationship of tea-oil extracted from tea-oil tree seeds by supercritical extraction method was carried out at gradient temperatures and constant shear rate,respectively.The results show that at 20,40,60 and 80 ℃,once the shear rate increases gradually,the torque enlarges correspondingly,while the viscosity shows little difference.However,at the constant shear rate,the rising temperature results in a steady downtrend on tea-oil viscosity.This results reveal that tea-oil viscosity is not closely correlated with shear rate at constant temperature,yet negatively correlated with temperature at constant shear rate.展开更多
文摘A supercritical CO2 extraction behavior of Eucalyptus oil was investigated under different conditions of pressure, temperature and time with or without cosolvent. The pressure range was from 8 to 25 MPa, temperature from 35 to 55°C and CO2 flow rate from 10 to 26 g/min. For 1,8-cineole the appropriate extracting pressure was 15 MPa and temperature was 45°C. When CO2 flow rate was 18 g/min, it was benefit to extract the other three substances (limonene, p-cymene and γ-terpinene, respectively) except 1,8-cineole. Prolonging extraction time could not obviously increase the extract concentration, but the extract yield would increase. The results also indicated that ethanol as a modifier could improve extraction velocity and extraction concentration.
文摘The present work presents a first characterization of the oil from the Moringa (Moringa oleifera) kernel as a potential candidate for biodiesel production. Moringa is an indigenous tree in the Yucatan Peninsula in Mexico, where there is a nascent biodiesel industry. Several extraction methods are compared in terms of the extraction yields, including solvent extraction (n-hexane and ethanol), and supercritical extraction (Sc-CO2). The results are also compared against previ- ously reported data. For supercritical extraction pressures of 200 to 400 bar and temperatures of 40℃ and 60℃ were tested. Gas Chromatography analysis reveals that the main fatty acids in Moringa oil are oleic acid (69%), palmitic acid (10%), and stearic acid (8%).
文摘Announcement from Editorial Board ? The following article has been retracted due to special reason of the authors. This paper published in Vol.2 No. 3, 2012, has been removed from this site. ? Title: Supercritical Fluid Extraction of Uncrushed Jordanian Olives Authors: Awni Al-Otoom, Sameer Al-Asheh, Mamdouh Allawzi, Khalid Mahshi, Nahawand Alzenati, Bader Banat, Bdour Alnimr ? ACES Editorial Board? May 19,
基金Projects(2007CB210201) supported by the Major State Basic Research Development Program of China
文摘The rheological analysis on dynamic shear rate-viscosity relationship of tea-oil extracted from tea-oil tree seeds by supercritical extraction method was carried out at gradient temperatures and constant shear rate,respectively.The results show that at 20,40,60 and 80 ℃,once the shear rate increases gradually,the torque enlarges correspondingly,while the viscosity shows little difference.However,at the constant shear rate,the rising temperature results in a steady downtrend on tea-oil viscosity.This results reveal that tea-oil viscosity is not closely correlated with shear rate at constant temperature,yet negatively correlated with temperature at constant shear rate.
