800-MW Supercritical Coal-Fired Boilers in Suizhong Power Plant

This article reviews the problems of Russia-made 800-MW coal-fired supercritical boilers in Suizhong Power Plant, such as burner bumout, water-wall leakage, slag screenⅠexplosion, crack happened on the desuperheater outlet of reheater and welding defect of economizer; tells the process of renovating these units by modifying the original design and adjusting the operation parameters. After several years' effort, all the problems have been well solved. The experience may be useful for other imported units in China.

Numerical Investigation on the Heat Transfer Characteristics of Supercritical Water in a Non-Uniformly Heated Tube for a Supercritical CFB Boiler

In this paper,a numerical model was built by ANSYS FLUENT to investigate the heat transfer performances of supercritical water in a circumferential non-uniformly heated vertical tube.The Shear Stress Transport(SST)k-ωmodel was adopted for describing turbulence.The operating parameters are chosen according to a 660 MW ultra-supercritical CFB boiler.The heat transfer performances under different operating parameters,such as boiler load,flow direction and heat flux distribution are analyzed.The temperature and heat flux on inner wall varies along the circumference and show symmetric distributions.The overall heat transfer performances at each cross section are better than the local heat transfer performance of midpoint of heating side.Flow direction has a great influence on heat transfer performance;it changes the radial distribution of axial velocity and then affects the turbulence distribution.Therefore,upward flow condition shows a better heat transfer performance.Smaller heat flux improves both the overall and local heat transfer performances.Reducing the heat flux area is not conducive to the overall heat transfer,but does not affect the local heat transfer at the midpoint of heating side.Finally,a new correlation is fitted based on the simulated results of supercritical water heat transfer with circumferential non-uniform heat flux distributions.

Industrial-scale investigations on effects of tertiary-air declination angle on combustion and steam temperature characteristics in a 350-MW supercritical down-fired boiler

Industrial-scale experiments were conducted to study the effects of tertiary air declination angle(TDA)on the coal combustion and steam temperature characteristics in the first 350-MW supercritical down-fired boiler in China with the multiple-injection and multiple-staging combustion(MIMSC)technology at medium and high loads.The experimental results indicated that as the TDA increased from 0°to 15°,the overall gas temperature in the lower furnace rose and the symmetry of temperature field was enhanced.The ignition distance of the fuel-rich coal/air flow decreased.In near-burner region,the concentration of O2 decreased while the concentrations of CO and NO increased.The concentration of NO decreased in near-tertiary-air region.The carbon in fly ash decreased significantly from 8.40%to 6.45%at a load of 260 MW.At a TDA of 15°,the ignition distances were the shortest(2.07 m and 1.73 m)at a load of 210 MW and 260 MW,respectively.The main and reheat steam temperatures were the highest(557.2℃ and 559.4℃ at a load of 210 MW,558.4℃ and 560.3℃ at a load of 260 MW).The carbon in fly ash was the lowest(4.83%)at a load of 210 MW.On changing the TDA from 15°to 25°,the flame kernel was found to move downward and the main and reheat steam temperatures dropped obviously.The change of TDA has little effect on NO_(x) emissions(660–681 mg/m^(3) at 6%O_(2)).In comprehensive consideration of the pulverized coal combustion characteristics and the unit economic performance,an optimal TDA of 15°is recommended.