Preparation of TiO_2-MoO_3 nano-composite photo-catalyst by supercritical fluid dry method

A series of TiO 2-MoO 3 nano-composite photocatalysts were prepared by supercritical fluid dry method(SCFD) and an impregnation technique with TiCl 4 and (NH 4) 6Mo 7O 24 ·4H 2O as the starting materials. The catalysts were characterized by the means of XRD, TEM and UV-Vis. Methyl orange was used as model compound for the evaluation of their catalytic activities. The results indicated that the photo-catalyst prepared by SCFD had the advantages of small size(12.84 nm), narrow distribution and good dispersivity. The presence of small amount of Mo in composite catalyst gives rise to the red shift of its absorbance wavelength, decrease of its energy gap and increase of the utility of visible light. Furthermore, higher surface acidity of the photo-catalyst was obtained as the result of the addition of MoO 3. Compared with pure TiO 2, the catalytic activity of the TiO 2-MoO 3 nano-composite photo-catalyst was improved significantly. As the doping concentration of the composite catalysts was controlled at 0.6%(molar percentage), 100% degradation of methyl orange was achieved with in 1.2 h irradiation time.

Study on Extraction of Effective Aroma Components from Formula Tobacco by the Supercritical CO2 Extraction Method and Its Aroma Composition

[Objectives]This study was conducted to improve the sensory quality and industrial availability of tobacco extracts.[Methods]The L9(34)design was adopted to carried out an extraction experiment,in which formula tobacco was extracted using supercritical CO2,and the extract was concentrated by vacuum distillation.Through sensory evaluation and chemical analysis,the function determination and chemical composition analysis of the tobacco extracts were carried out,and the optimal supercritical fluid extraction process was finally determined.[Results]The obtained optimal supercritical fluid extraction conditions were as follows:extraction temperature 55℃,extraction pressure 25 MPa,CO2 flow rate of 20 L/h,and entrainer of 95%ethanol.The tobacco extract obtained under the optimal conditions endowed the cigarettes with full and delicate aroma,less irritation and clean aftertaste and made the flavor of the cigarettes overall coordinated and softer,so the sensory quality was significantly improved.[Conclusions]The tobacco extract obtained by the supercritical CO2 extraction method from formula tobacco can effectively improve the quality of cigarettes.

Preparation of (Ti, Sn)O_2 Nano-Composite Photocatalyst by Supercritical Fluid Dry Combination Technology

A series of TiO2-SnO2 nano-sized composite photo-catalysts containing Sn (9.3%-30.1%) were prepared from TiCI4 and SnCl4·5H2O by using sol-gel, supercritical fluid dry and solid-phase reaction (SCFD) combination technology. Characterizations with X-ray diffraction (XRD), transmission electron microscopy (TEM) and Fourier Transform Infrared Spectroscopy (FTIR) showed that, in addition to anatase type TiO2, a new active phase (Ti, Sn)O2 (with particle size of 2.0-4.3 nm) formed, and there were no SnO2 crystals observed in the range of the doping concentration studied. Photo-catalytic reaction of phenol was used as a model reaction to evaluate the catalytic activities of the obtained catalysts. Compared with pure TiO2 or Ti-Sn catalyst prepared with general sol-gel method, Ti-Sn nano-composite photo-catalyst thus obtained showed significant improvement in catalytic activity. The photo-catalytic degradation rate of phenol could reach as high as 93.5% after 7 h. The preparation conditions of the new phase (Ti, Sn)O2 were investigated and its catalytic mechanism was proposed. The photo-catalytic particles prepared using SCFD combination technology exhibited small particle size, large surface area and high activity.

Silicon carbide nanotubes with special morphology prepared by super critical hydrothermal method and photoluminescence character

Silicon carbide nanotubes（SiCNTs） with special morphology synthesized by supercritical hydrothermal method at 470 C and 8 MPa have been reported in this paper.SiCNTs with special morphology were characterized by transmission electron microscopy（TEM） and high-resolution TEM（HRTEM）.There are two kinds of silicon carbide with special morphology：One is oval SiCNTs with small aspect ratio,the other is bamboo cone-shape structure.SiCNTs have been analyzed by fluorescence spectrometer.The results indicate that the SiCNTs have strong photoluminescence（PL） property.The SiCNTs with oval shape are one kind of intermediate state of growth process of nanotube.The growth mechanism of silicon nanotubes has been proposed based on experiment data.The investigations of growth mechanism of SiCNTs with bamboo structure show that the defect produced in the growth process play the important role in SiCNTs with special structure.