Robustα-Fe_(2)O_(3)/Epoxy Resin Superhydrophobic Coatings for Anti-icing Property

α-Fe_(2)O_(3)/epoxy resin composite superhydrophobic coating was prepared withα-Fe_(2)O_(3) nanoparticles and epoxy resin by spin coating method.The coating without epoxy resin has higher contact angle(CA)and lower ice adhesion strength(IAS),but the mechanical properties are poor.Theα-Fe_(2)O_(3)/epoxy resin composite superhydrophobic coating exhibits good mechanical durability.In addition,compared with the bare aluminum substrate,the Ecorr of the composite coating is positive and the Jcorr is lower.The inhibition efficiency of the composite coating is as high as 99.98%in 3.5 wt%NaCl solution.The difference in the microstructure caused by the two preparation methods leads to the changes in mechanical properties and corrosion resistance of composite superhydrophobic coating.

Superhydrophobic Surface-Assisted Preparation of Microspheres and Supraparticles and Their Applications

Superhydrophobic surface(SHS) has been well developed, as SHS renders the property of minimizing the water/solid contact interface. Water droplets deposited onto SHS with contact angles exceeding 150°, allow them to retain spherical shapes, and the low adhesion of SHS facilitates easy droplet collection when tilting the substrate. These characteristics make SHS suitable for a wide range of applications. One particularly promising application is the fabrication of microsphere and supraparticle materials. SHS offers a distinct advantage as a universal platform capable of providing customized services for a variety of microspheres and supraparticles. In this review, an overview of the strategies for fabricating microspheres and supraparticles with the aid of SHS, including cross-linking process, polymer melting,and droplet template evaporation methods, is first presented. Then, the applications of microspheres and supraparticles formed onto SHS are discussed in detail, for example, fabricating photonic devices with controllable structures and tunable structural colors, acting as catalysts with emerging or synergetic properties, being integrated into the biomedical field to construct the devices with different medicinal purposes, being utilized for inducing protein crystallization and detecting trace amounts of analytes. Finally,the perspective on future developments involved with this research field is given, along with some obstacles and opportunities.

Characterization of Flame Retardancy and Oil-Water Separation Capacity of Superhydrophobic Silylated Melamine Sponges

A silylated melamine sponge(SMS)was prepared by two simple steps,namely,immersion and dehydration of a melamine sponge coated with methyltrichlorosilane.The silylated structure of SMS was characterized by FT-IR(Fourier-transform infrared)spectroscopy,SEM(Scanning electron microscopy)and in terms of water contact angles.Its oil-water absorption and separation capacities were measured by FT-IR and UV-visible spectrophoto-metry.The experimental results have shown that oligomeric silanol covalently bonds by Si-N onto the surface of melamine sponge skeletons.SMS has shown superhydrophobicity with a water contact angle exceeding 150°±1°,a better separation efficiency with regard to diesel oil(by 99.31%(wt/wt%)in oil-water mixture and even up to 99.99%(wt/wt%)for diesel oil in its saturated aqueous solution.Moreover,SMS inherited the intrinsicflame retardancy of the melamine sponge.In general,SMS has shown superhydrophobicity,high porosity,excellent selectivity,remarkable recyclability,and better absorption capacity for various oils and organic solvents,and a high separation efficiency for oil in saturated aqueous solutions.

Wettability Control between Oleophobic/Superhydrophilic and Superoleophilic/Superhydrophobic Characteristics on the Modified Surface Treated with Fluoroalkyl End-Capped Oligomers/Micro-Sized Polystyrene Particle Composites

Fluoroalkyl end-capped vinyltrimethoxysilane-N,N-dimethylacrylamide cooligomer [RF-(CH2-CHSi(OMe)3)x-(CH2-CHC(=O)NMe2)y-RF;RF = CF(CF3)OC3F7: RF-(VM)x-(DMAA)y-RF] was synthesized by reaction of fluoroalkanoyl peroxide [RF-C(=O)O-O(O=)C-RF] with vinyltrimethoxysilane (VM) and N,N-dimethylacrylamide (DMAA). The modified glass surface treated with the cooligomeric nanoparticles [RF-(VM-SiO3/2)x-(DMAA)y-RF] prepared under the sol-gel reaction of the cooligomer under alkaline conditions was found to exhibit an oleophobic/superhydrophilic property, although the corresponding fluorinated homooligomeric nanoparticles [RF-(VM-SiO3/2)n-RF] afforded an oleophobic/hydrophobic property on the modified surface under similar conditions. RF-(VM-SiO3/2)n-RF/RF-(VM-SiO3/2)x-(DMAA)y-RF/PSt (micro-sized polystyrene particles) composites, which were prepared by the sol-gel reactions of the corresponding homooligomer and cooligomer in the presence of PSt particle under alkaline conditions, provided an oleophobic/superhydrophilic property on the modified surface. However, it was demonstrated that the surface wettability on the modified surface treated with the RF-(VM-SiO3/2)n-RF/RF-(VM-SiO3/2)x-(DMAA)y-RF/PSt composites changes dramatically from oleophobic/superhydrophilic to superoleophilic/superhydrophilic and superoleophilic/superhydrophobic characteristics, increasing with greater feed ratios (mg/mg) of the RF-(VM)n-RF homooligomer in homooligomer/cooligomer from 0 to 100 in the preparation of the composites. Such controlled surfac

ZIF-8-based micro-arc oxidation composite coatings enhanced the corrosion resistance and superhydrophobicity of a Mg alloy

Mg alloys are considered the most promising engineering materials because of their unique properties.However,the uncontrolled corrosion rate of these alloys limits their applications.Therefore,in this study,a micro-arc oxidation layer was used as a transition layer to“directly”grow a zinc-based metal-organic framework(MOF)composite coating on the surface of a Mg alloy(AZ91D).Herein,the two zeolitic imidazolate framework(ZIF-8)coatings with different morphologies were separately prepared by homologous metal oxide induction and a one-step in-situ growth method.The superhydrophobic composite coating showed strong hydrophobicity and self-cleaning properties,which could prevent the penetration of water and corrosive ions(Cl^(−))into the surface of AZ91D.Electrochemical tests demonstrated that the super-hydrophobic composite coatings greatly enhanced the corrosion resistance of AZ91D,and the corrosion current density decreased from 10^(−5)to 10^(−9)A/cm^(2).These results indicate that the ZIF-8 coatings are beneficial for improving the hydrophobicity and enhancing the corrosion resistance of Mg alloys.Therefore,MOF composite coatings provide a new strategy that can be used to prepare multifunctional anticorrosion coatings on metal substrates.

Corrosion resistance and anti-soiling performance of micro-arc oxidation/graphene oxide/stearic acid superhydrophobic composite coating on magnesium alloys

Magnesium(Mg)alloys,the lightest metal construction material used in industry,play a vital role in future development.However,the poor corrosion resistance of Mg alloys in corrosion environments largely limits their potential wide applications.Therefore,a micro-arc oxidation/graphene oxide/stearic acid(MAO/GO/SA)superhydrophobic composite coating with superior corrosion resistance was fabricated on a Mg alloy AZ91D through micro-arc oxidation(MAO)technology,electrodeposition technique,and self-assembly technology.The composition and microstructure of the coating were characterized by scanning electron microscopy,X-ray diffraction,energy dispersive spectroscopy,and Raman spectroscopy.The effective protection of the MAO/GO/SA composite coating applied to a substrate was evaluated using potentiodynamic polarization,electrochemical impedance spectroscopy tests,and salt spray tests.The results showed that the MAO/GO/SA composite coating with a petal spherical structure had the best superhydrophobicity,and it attained a contact angle of 159.53°±2°.The MAO/GO/SA composite coating exhibited high resistance to corrosion,according to electrochemical and salt spray tests.

ZnO@ZIF-8 core-shell structure nanorods superhydrophobic coating on magnesium alloy with corrosion resistance and self-cleaning

A longstanding quest in material science has been the development of superhydrophobic coating based on a single material, without the requirement of fluorination or silane treatment. In this work, the micro-arc oxidation(MAO) coating as transition layer can effectively enhance the bonding force of the superhydrophobic coating. The semiconductor@metal organic frameworks(MOFs) core-shell structure was synthesized by a simple self-templating method, and obtained ZnO@2-methylimidazole zinc salt(ZIF-8) nanorods array on magnesium(Mg)alloy. ZnO nanorods not only act as the template but also provide Zn^(2+) for ZIF-8. In addition, we proved that the ligand concentration,synthesis time and temperature are the keys to the preparation of ZnO@ZIF-8 nanorods. As we expect, the ZnO@ZIF-8 nanorods array can trap air in the gaps to form an air layer, and the coating exhibits superhydrophobic properties(154.81°). Excitingly, ZnO@ZIF-8 nanorods array shown a superhydrophobic property, without the requirement of fluorination or silane treatment. The results shown that the coating has good chemical stability and self-cleaning performance. Meanwhile, the corrosion resistance has been significantly improved, R_(ct) was increased from 1.044×10^(3) to 1.414×10^(6) Ω/cm^(2) and I_(corr) was reduced from 4.275×10^(-5) to 5.611×10^(-9)A/cm^2. Therefore, the semiconductor@MOFs core-shell structure has broad application prospects in anti-corrosion.

Recent advances in preparation of metallic superhydrophobic surface by chemical etching and its applications

In the past few decades,inspired by the superhydrophobic surfaces(SHPS)of animals and plants such as lotus leaves,rose petals,legs of water striders,and wings of butterflies,preparing metal materials with metallic SHPS(MSHPS)have attracted great research interest,due to the great prospect in practical applications.To obtain SHPS on conventional metal materials,it is necessary to construct rough surface,followed by modification with low surface energy substances.In this paper,the action mechanism and the current research status of MSHPS were reviewed through the following aspects.Firstly,the model of wetting theory was presented,and then the progress in MSHPS preparation through chemical etching method was discussed.Secondly,the applications of MSHPS in self-cleaning,anti-icing,corrosion resistance,drag reduction,oil-water separation,and other aspects were introduced.Finally,the challenges encountered in the present application of MSHPS were summarized,and the future research interests were discussed.

Photothermal superhydrophobic copper nanowire assemblies: fabrication and deicing/defrosting applications

Ice and frost buildup continuously pose significant challenges to multiple fields.As a promising de-icing/defrosting alternative,designing photothermal coatings that leverage on the abundant sunlight source on the earth to facilitate ice/frost melting has attracted tremendous attention recently.However,previous designs suffered from either localized surface heating owing to the limited thermal conductivity or unsatisfied meltwater removal rate due to strong water/substrate interaction.Herein,we developed a facile approach to fabricate surfaces that combine photothermal,heat-conducting,and superhydrophobic properties into one to achieve efficient de-icing and defrosting.Featuring copper nanowire assemblies,such surfaces were fabricated via the simple template-assisted electrodeposition method,allowing us to tune the nanowire assembly geometry by adjusting the template dimensions and electrodeposition time.The highly ordered copper nanowire assemblies facilitated efficient sunlight absorption and lateral heat spreading,resulting in a fast overall temperature rise to enable the thawing of ice and frost.Further promoted by the excellent water repellency of the surface,the thawed ice and frost could be spontaneously and promptly removed.In this way,the all-in-one design enabled highly enhanced de-icing and defrosting performance compared to other nanostructured surfaces merely with superhydrophobicity,photothermal effect,or the combination of both.In particular,the defrosting efficiency could approach∼100%,which was the highest compared to previous studies.Overall,our approach demonstrates a promising path toward designing highly effective artificial deicing/defrosting surfaces.

New superhydrophobic composite coatings on Mg-Mn-Ce magnesium alloy

A novel combined method for the formation of composite coatings on the Mg-Mn-Ce alloy is developed.Ceramic like matrix was formed on the Mg alloy surface by the plasma electrolytic oxidation.Then the samples were subsequently processed by dip-coating in an alcohol suspension of superdispersed polytetrafluoroethylene and spraying with the tetrafluoroethylene telomers solution.SEM,OSP,and SPM was used to study structure of formed surfaces.It was established by measurements of CA and CAH,as well as surface free energy calculations that formed coatings demonstrate superhydrophobic properties due to the presence of an irregular hierarchical surface structure and low surface free energy of fluoropolymers.The coating preserves its hydrophobic properties after exposure to high and low temperatures,for a long time as well as being in corrosive environments.EDS and XRD data analysis confirmed the presence of organofluorine compounds in the composite layers,including in the form of crystalline polytetrafluoroethylene.Using potentiodynamic polarization test and EIS,it was found that the resulting coatings significantly increase the corrosion resistance of Mg material.These data are also confirmed by salt spray tests for 40 days.Incorporation of fluoropolymers additionally decrease coatings coefficient of friction.

Facile fabrication of durable superhydrophobic fabrics by silicon polyurethane membrane for oil/water separation

Nowadays, oil contamination has become a major reason for water pollution, and presents a global environmental challenge. Although many efforts have been devoted to the fabrication of oil/water separation materials, their practical applications are still hindered by their weak durability, poor chemical tolerance,environmental resistance, and potential negative impact on health and the environment. To overcome these drawbacks, this work offers a facile method to fabricate the eco-friendly and durable oil/water separation membrane fabrics by alkaline hydrolysis and silicon polyurethane coating. The X-ray photoelectron spectroscopy, scanning electron microscopy, and atomic force microscopy results demonstrate that silicon polyurethane membrane could be coated onto the surface of hydrolyzed polyester fabric and form a micro-/nano-scaled hierarchical structure. Based on this, the modified fabric could have a stable superhydrophobic property with a water contact angle higher than 150°, even after repeated washing and mechanical abrasion 800 times, as well as chemical corrosion. Moreover, the modified fabrics show excellent oil/water separation efficiency of up to 99% for various types of oil–water mixture. Therefore, this durable, eco-friendly and cost-efficient superhydrophobic fabric has great potential in large-scale oil/water separation.

Fabrication of adsorbents with enhanced CuⅠ stability: Creating a superhydrophobic microenvironment through grafting octadecylamine

In atmospheric conditions, CuⅠis easily oxidized to CuⅡdue to the coexistence of moisture and oxygen.The poor oxidation inhibition of CuⅠrestricts the practical application of CuⅠ-containing materials.Herein we introduce an approach to construct a superhydrophobic microenvironment in CuⅠfunctionalized metal–organic frameworks by coordinatedly grafting organic amine compounds onto open metal sites(OMSs), which can hinder the accessibility of moisture to pores thereby enhancing the stability of CuⅠ. As a proof of concept, MIL-101(Cr) with abundant OMSs and octadecylamine(OA)with long hydrophobic alkyl groups are used as carrier and surface coating. As superhydrophobic porous materials, the resultant CuⅠM-OA exhibits improved CuⅠstability in addition to retaining high crystallinity and intact porosity while almost all CuⅠis oxidized in hydrophilic CuⅠM upon exposure in a humid atmosphere for 30 h. CuⅠM-OA owns excellent adsorption desulfurization performance(ADS) with regard to thiophene, benzothiophene, and 4,6-dimethyl dibenzothiophene. Even from hydrated fuel, the adsorption performance of CuⅠM-OA maintains well while the adsorption capacity of CuⅠM decreases to 7% after4 cycles. The remarkable moisture resistance, CuⅠstability, and high porosity make the current adsorbent CuⅠM-OA highly promising for the practical ADS process.

The superhydrophobic sponge decorated with Ni-Co double layered oxides with thiol modification for continuous oil/water separation

In this paper, the superhydrophobic polyurethane sponge(SS-PU) was facilely fabricated by etching with Jones reagent to bind the nanoparticles of Ni-Co double layered oxides(LDOs) on the surface, and following modification with n-dodecyl mercaptan(DDT). This method provides a new strategy to fabricate superhydrophobic PU sponge with a water contact angle of 157° for absorbing oil with low cost and in large scale. It exhibits the strong absorption capacity and highly selective characteristic for various kinds of oils which can be recycled by simple squeezing. Besides, the as-prepared sponge can deal with the floating and underwater oils, indicating its application value in handling oil spills and domestic oily wastewater. The good self-cleaning ability shows the potential to clear the pollutants due to the ultralow adhesion to water. Especially, the most important point is that the superhydrophobic sponge can continuously and effectively separate the oil/water mixture against the condition of turbulent disturbance by using our designed device system, which exhibit its good superhydrophobicity, strong stability.Furthermore, the SS-PU still maintained stable absorption performance after 150 cycle tests without losing capacity obviously, showing excellent durability in long-term operation and significant potential as an efficient absorbent in large-scale dispose of oily water.

Green Superhydrophobic Paper with Self-cleaning Properties Prepared via One-step Impregnation

In this study,a green and pollution-free multifunctional superhydrophobic paper-based material was prepared using a simple and efficient dipping method.The superhydrophobic paper with a water contact angle(WCA)of 160°was prepared by attaching micro-and nanocomposite particles,made of stearic acid-modified chitosan and two kinds of titanium dioxide(TiO_(2))nanoparticles of different sizes,to a paper substrate.The surface morphology,elemental composition,and wetting properties of the coatings were examined using scanning electron microscopy(SEM),X-ray photoelectron spectroscopy(XPS),Fourier transform infrared spectroscopy(FT-IR),and contact angle measurements.Additionally,superhydrophobic coatings exhibited good self-cleaning properties,liquid repellency,ease of repair,and antifouling properties in organic solutions.

Superhydrophobicity of Bionic Alumina Surfaces Fabricated by Hard Anodizing

Bionic alumina samples were fabricated on convex dome type aluminum alloy substrate using hard anodizing technique. The convex domes on the bionic sample were fabricated by compression molding under a compressive stress of 92.5 MPa. The water contact angles of the as-anodized bionic samples were measured using a contact angle meter （JC2000A） with the 3μL water drop at room temperature. The measurement of the wetting property showed that the water contact angle of the unmodi- fied as-anodized bionic alumina samples increases from 90° to 137° with the anodizing time. The increase in water contract angle with anodizing time arises from the gradual formation of hierarchical structure or composite structure. The structure is composed of the micro-scaled alumina columns and pores. The height of columns and the depth of pores depend on the ano- dizing time. The water contact angle increases significantly from 96° to 152° when the samples were modified with self-assembled monolayer of octadecanethiol （ODT）, showing a change in the wettability from hydrophobicity to su- per-hydrophobicity. This improvement in the wetting property chemical modification. is attributed to the decrease in the surface energy caused by the

Modeling Superhydrophobic Contact Angles and Wetting Transition

It is well known that surface roughness has a very important effect on superhydrophobicity.The Wenzel and Cassie-Baxter models,which correspond to the homogeneous and heterogeneous wetting respectively,are currently primary instructions for designing superhydrophobic surfaces.However,the particular drop shape that a drop exhibits might depend on how it is formed. A water drop can occupy multiple equilibrium states,which relate to different local minimal energy.In some cases,both equilibrium states can even co-exist on a same substrate.Thus the apparent contact angles may vary and have different values.We discuss how the Wenzel and Cassie-Baxter equations determine the homogeneous and heterogeneous wetting theoretically. Contact angle analysis on hierarchical surface structure and contact angle hysteresis has been put specific attention.In particular, we study the energy barrier of transition from Cassie-Baxter state to Wenzel state,based on existing achievement by previous researchers,to determine the possibility of the transition and how it can be interpreted.It has been demonstrated that surface roughness and geometry will influence the energy required for a drop to get into equilibrium,no matter it is homogeneous or heterogeneous wetting.

Fabrication of corrosion-resistant superhydrophobic coating on magnesium alloy by one-step electrodeposition method

A one-step electrodeposition method was used to construct a superhydrophobic coating on the surface of magnesium alloy.Using magne-sium nitrate and ethanol solution of stearic acid as electrolyte,four groups of electrolytes with different ratios of stearic acid and magnesium nitrate were designed to explore the influence of electrolyte to the process.The contact angles of the four coating samples were 136.4±5.8°,152.7±2.8°,156.2±4.9°and 155.1±4.4°The addition of magnesium nitrate in the solution increased the hydrogen evolution reaction in the electrodeposition process,which was not conducive to electrodeposition process.During the deposition process,the sample prepared in a molar ratio of stearic acid to magnesium nitrate of 10:1 had the best corrosion resistance,and its corrosion circuit density was 3.74×10^(−8)A/cm^(2),far lower than the corrosion current density of the magnesium alloy substrate.

Fabrication of Superhydrophobic Micro Post Array on Aluminum Substrates Using Mask Electrochemical Machining

Surfaces with controllable micro structures are significant in fundamental development of superhydrophobicity. However,preparation of superhydrophobic surfaces with array structures on metal substrates is not effective using existing methods. A new method was presented to fabricate super-hydrophobic post arrays on aluminum(Al) substrates using mask electrochemical machining and fluoridation. Electrochemical etching was first applied on Al plates with pre-prepared photoresist arrays to make the post array structures. Surface modification was subsequently applied to reduce the surface energy, followed by interaction with water to realize superhydrophobicity. Simulation and experimental verification were conducted to investigate how machining parameters affect the array structures. Analysis of the water contact angle was implemented to explore the relationship between wettability and micro structures.The results indicate that superhydrophobic surfaces with controllable post structures can be fabricated through this proposed method, producing surfaces with high water static contact angles.

Recent Progress in Preparation of Superhydrophobic Surfaces: A Review

In nature, water-repellency (superhydrophobicity) is found, besides in plants, in insects and bird feathers. The booming field of biomimetics allows one to mimic nature to develop nanomaterials, nanodevices, and processes which offer desirable properties. Biomimetics means mimicking biology or nature. Inspired from nature, which reveals excellent superhydrophobicity, researchers have recently developed and implemented biomimetic superhydrophobic surfaces in a variety of smart and simple ways. Superhydrophobicity is an effect where surface roughness and chemical composition combine to generate unusual water repellent surface, causing water to bounce and roll off the surface. This review article provides the overview of the recent progress (within the last four years) in the synthesis, characterization, theoretical modelling, and applications of superhydrophobic surfaces, with focus on the different techniques used and how they have developed over the years. At last, the difficulties related to implementation of superhydrophobic surfaces in day to day life are discussed. This review can find interesting for students, scientists and industrial companies working especially on superhydrophobic surfaces.

Preparation of Nano-SiO_2/Amino-modified Polysiloxane Hybrid Superhydrophobic Coating and Thermal-stability Characterization

We put forward a large-area and cost-effective method to fabricate superhydrophobic coating by introducing in-situ functionalized nano-SiO2 into side-amino modified hydroxy-terminated polydimethylsiloxane （SA-HTPDMS） curing system. With the characterization using water contact angle （WCA） tester, Fourier transform infrared spectroscopy （FTIR）, scanning electron microscope （SEM）, atomic force microscopy （AFM） and simultaneous thermal analysis, the as-prepared coating displayed a tremendous WCA of 154.8±1°, sliding angle （SA） about 3.5° and stable self-cleaning property range from -10 to 80 ℃. It was also found that the synergistic effect of surface micro-nano hierarchical structure and chemical hydrophobicity, stability from matrix had made contributions to the superhydrophobicity and excellent heat resistance up to 300 ℃.