The first results of divertor discharge and supersonic molecular beam injection on the HL-2A tokamak

HL-2A tokamak is the first tokamak with divertors in China. The plasma boundary and the position of the striking point on the target plates of the HL-2A closed diwrtor were simulated by the current filament code and they were in agreement with the diagnostic results in the divertor. Supersonic molecular beam injection （SMBI） system was first installed and tested on the HL-2A tokamak in 2004. In the present experiment low pressure SMBI fuelling on the HL-2A closed divertor was carried out. The experimental results indicate that the divertor was operated in the ＇linear regime＇ and during the period of SMB pulse injection into the HL-2A plasma the power density eonvected at the target plate surfaces was 0.4 times of that before or after the beam injection. It is a useful fuelling method for decreasing the heat load on the neutralizer plates of the divertor.

Interaction of supersonic molecular beam with low-temperature plasma

The interaction between the supersonic molecular beam(SMB)and the low-temperature plasma is a critical issue for the diagnosis and fueling in the Tokamak device.In this work,the interaction process between the argon SMB and the argon plasma is studied by a high-speed camera based on the Linear Experimental Advanced Device(LEAD)in Southwestern Institute of Physics,China.It is found that the high-density SMB can extinct the plasma temporarily and change the distribution of the plasma density significantly,while the low-density SMB can hardly affect the distribution of plasma density.This can be used as an effective diagnostic technique to study the evolution of plasma density in the interaction between the SMB and plasma.Moreover,the related simulation based on this experiment is carried out to better understand the evolution of electron density and ion density in the interaction.The simulation results can be used to analyze and explain the experimental results well.

Simulation of Supersonic Molecular Beam Fueling on HL-1M Tokamak

The supersonic molecular beam (SMB) ablation and penetration processes in the HL-1M tokamak experiments are studied. The cluster formation and dissolution, SMB adiabatic expansion, shielding and cooling effect are all taken into account. An optimized numerical model is applied in the analysis and shown to be in good agreement with the experimental observations. The possibility of fueling large tokamak plasmas with SMB injection is explored.

Diagnosis for the Interaction of Supersonic Molecular Beam with Plasma

Supersonic Molecular Beam Injection (SMBI) is a new fuelling method for Tokamaks and has recently been improved to enhance the flux of the beam and to make a survey of the cluster effect within the beam. There are a series of new phenomena, which implicate the interaction of the beam (including clusters) with the toroidal plasma of HL-1M Tokamak. The Ha signals from the edge show a regular variation around the torus. Around the injection port, the edge Hα signals are positive rectangular wave, which is consistent with that of the injection beam pulses. The edge electron temperature, measured with movable Langmuir probes, decreases by an order of magnitude and the density increases by an order of magnitude. Hα emission at the beam injection port, measured with CCD camera at an angle of 13.4 degrees to the SMBI line, shows many separate peaks within the contour plot. These peaks may show the strong emission produced by the interaction of the hydrogen clusters with the plasma. Hydrogen clusters may be produced in the beam according to the empirical scaling (Hagena) law of clustering onset, * = .here d is the nozzle diameter in μm, Po the stagnation pressure in mbar, To the source temperature in K, and k is a constant related to the gas species. If * > 100, clusters will be formed. In present experiment * is about 127.

Experiments on Gas Jet in the Wendelstein 7-AS Stellarator

Wendelstein 7-AS (W7-AS) pertains to an advanced helical stellarator. A new fuelling method, the supersonic molecular beam injection (SMBI, named Gas Jet in Germany) system was installed in W7-AS in May 2001 as a cooperation research item co-supported by the National Nature Science Foundation of China and the Max-Planck Institute of Plasma Physics, Garching, Germany. The experiments of the gas jet with hydrogen or deuterium on W7-AS were implemented. The experimental results exhibit the following features such as high fuelling efficiency, stable high-density plasmas and reduction of the recycling fluxes from the vessel wall during injection. These crucial points show that the new fuelling method can be applied to long and stable discharges.

Density Limits with Different Fuelling Methods in the HL-2A Tokamak

Density limits with different fuelling methods have been compared in HL-2A, i.e. direct gas puffing and supersonic molecular beam injection （SMBI） from outer midplane, and divertor gas fuelling. The maximum densities for low current discharges are 3.4×10^19 m-3, 4.3×10^19 m-3 and 4.7×10^19 m-3 for the 3 kinds of fuelling methods. The corresponding density ratios to Green- wald density limit are 0.9, 1.1, 1.2, respectively. The behavior of density limit disruption is analyzed as well.

Experimental Observation of the Edge and Divertor Plasma in HL-2A

Edge plasma characteristics were studied by a fast-scanning 4-probe array and a Much/Reynolds stress/Langmuir 10-probe movable array in the boundary region. These probes could measure the edge plasma temperature, density, poloidal electric field, radial electric field, Reynolds stress, poloidal rotation velocities and their profiles, which could be obtained by changing the radial positions of the probe array shot by shot. The measured results were used to analyse plasma confinement, turbulent fluctuations and correlations. The fixed flush 3-probe arrays were mounted on the 4-divertor neutralization plates at the same toroidal cross-section in the divertor chamber. These probes were used to measure the profiles of the electron temperature, density and float potential in the divertor chamber. Edge plasma behaviours in both limiter configuration and divertor configuration are compared. The decay lengths of the edge temperature and density were measured and is emphasized for plasma behaviours of the supersonic molecular beam injection and lower hybrid current drive. The dependence of the radial gradient of Reynolds stress on the poloidal flow and the radial gradient of the electric field on turbulent loss are discussed.