Abstract： The purpose of this paper is to evaluate the suitability of using trass as a supplementary cementing material in pervious concrete. OPC （Ordinary Portland Cement） was replaced in the concrete mix by 15%, ...Abstract： The purpose of this paper is to evaluate the suitability of using trass as a supplementary cementing material in pervious concrete. OPC （Ordinary Portland Cement） was replaced in the concrete mix by 15%, 25% and 35% weight percentages and the results were compared with reference mixtures with 100% Portland cement. The variables in this study were trass content, aggregate size and water to cement ratio. Sixteen eases of concrete mixtures were tested to study physical and mechanical properties of hardened concrete, including porosity, permeability, compressive strength, splitting-tensile strength and flexural strength at various ages. Results indicated that mechanical properties of the pervious concrete marginally decreased with the increased content of trass when compared to the reference mixtures. However, at later ages the differences were insignificant.展开更多
To improve the pozzolanic reactivity,waste glass(WG)needs to be micronized to fine particles so as to expedite the leaching of active constituent.The key feature of this work is to examine the effect of wet-grinded WG...To improve the pozzolanic reactivity,waste glass(WG)needs to be micronized to fine particles so as to expedite the leaching of active constituent.The key feature of this work is to examine the effect of wet-grinded WG on the mechanical and structural properties of cement based materials.The experimental results show that wet-grinding can improve the ions leaching behavior of WGP and decrease the stability of silicon oxide bond.The pozzolanic reactivity of WGP was dramatically enhanced after wet-grinding,as high as 144.1%at 1 d and 110.9%at 28 d when the mean grain size of WGP reached 0.90μm.The ground WGP can promote the transformation of capillary pores to gel pores to improve the compactness of microstructure regardless of the reaction time.展开更多
NMR is becoming increasingly popular for the investigation of building materials as it is a non-invasive technology that does not require any sample preparation nor causes damage to the material.Depending on the speci...NMR is becoming increasingly popular for the investigation of building materials as it is a non-invasive technology that does not require any sample preparation nor causes damage to the material.Depending on the specific application it can offer insights into properties like porosity and spatial saturation degree as well as pore structure.Moreover it enables the determination of moisture transport properties and the(re-)distribution of internal moisture into different reservoirs or chemical phases upon damage and curing.However,as yet most investigations were carried out using devices originally either designed for geophysical applications or the analysis of rather homogeneous small scale(<10 mL)samples.This paper describes the capabilities of an NMR tomograph,which has been specifically optimized for the investigation of larger,heterogeneous building material samples(diameters of up to 72 mm,length of up to 700 mm)with a high flexibility due to interchangeable coils allowing for a high SNR and short echo times(50-80 ms).展开更多
Magnesium slag(MS)is an industrial byproduct with high CO_(2)sequestration potential.This study investigates the carbonation behavior and microstructural changes of MS during wet carbonation at 0℃.XRD,TG,FTIR,SEM,and...Magnesium slag(MS)is an industrial byproduct with high CO_(2)sequestration potential.This study investigates the carbonation behavior and microstructural changes of MS during wet carbonation at 0℃.XRD,TG,FTIR,SEM,and BET techniques were used to characterize the phase composition,microstructure,and porosity of MS samples carbonated for different durations.The results showed that the main carbonation products were calcite,vaterite,and highly polymerized silica gel,with particle sizes around 1μm.The low-temperature environment retarded the carbonation reaction rate and affected the morphology and crystallization of calcium carbonate.After 480 min of carbonation,the specific surface area and porosity of MS increased substantially by 740%and 144.6%,respectively,indicating improved reactivity.The microstructure of carbonated MS became denser with calcite particles surrounded by silica gel.This study demonstrates that wet carbonation of MS at 0℃significantly enhances its properties,creating an ultrafine supplementary cementitious material with considerable CO_(2)sequestration capacity.展开更多
文摘Abstract： The purpose of this paper is to evaluate the suitability of using trass as a supplementary cementing material in pervious concrete. OPC （Ordinary Portland Cement） was replaced in the concrete mix by 15%, 25% and 35% weight percentages and the results were compared with reference mixtures with 100% Portland cement. The variables in this study were trass content, aggregate size and water to cement ratio. Sixteen eases of concrete mixtures were tested to study physical and mechanical properties of hardened concrete, including porosity, permeability, compressive strength, splitting-tensile strength and flexural strength at various ages. Results indicated that mechanical properties of the pervious concrete marginally decreased with the increased content of trass when compared to the reference mixtures. However, at later ages the differences were insignificant.
基金Funded by the National Natural Science Foundation of China(No.52008158)the National Key Research and Development Program of China(No.2019YFC1907104)。
文摘To improve the pozzolanic reactivity,waste glass(WG)needs to be micronized to fine particles so as to expedite the leaching of active constituent.The key feature of this work is to examine the effect of wet-grinded WG on the mechanical and structural properties of cement based materials.The experimental results show that wet-grinding can improve the ions leaching behavior of WGP and decrease the stability of silicon oxide bond.The pozzolanic reactivity of WGP was dramatically enhanced after wet-grinding,as high as 144.1%at 1 d and 110.9%at 28 d when the mean grain size of WGP reached 0.90μm.The ground WGP can promote the transformation of capillary pores to gel pores to improve the compactness of microstructure regardless of the reaction time.
文摘NMR is becoming increasingly popular for the investigation of building materials as it is a non-invasive technology that does not require any sample preparation nor causes damage to the material.Depending on the specific application it can offer insights into properties like porosity and spatial saturation degree as well as pore structure.Moreover it enables the determination of moisture transport properties and the(re-)distribution of internal moisture into different reservoirs or chemical phases upon damage and curing.However,as yet most investigations were carried out using devices originally either designed for geophysical applications or the analysis of rather homogeneous small scale(<10 mL)samples.This paper describes the capabilities of an NMR tomograph,which has been specifically optimized for the investigation of larger,heterogeneous building material samples(diameters of up to 72 mm,length of up to 700 mm)with a high flexibility due to interchangeable coils allowing for a high SNR and short echo times(50-80 ms).
基金support from the National Key R&D Program Intergovernmental International Science and Technology Innovation Cooperation Project(2018YFE0107300)the China Building Materials Federation(20221JBGS03-11)+2 种基金the Science and Technology Project of Henan Province(211110231400,212102310559,212102310564,222300420167,22A430022)the Opening Project of the State Key Laboratory of Green Building Materials(2021GBM06)the Henan Outstanding Foreign Scientists’Workroom(GZS2021003).
文摘Magnesium slag(MS)is an industrial byproduct with high CO_(2)sequestration potential.This study investigates the carbonation behavior and microstructural changes of MS during wet carbonation at 0℃.XRD,TG,FTIR,SEM,and BET techniques were used to characterize the phase composition,microstructure,and porosity of MS samples carbonated for different durations.The results showed that the main carbonation products were calcite,vaterite,and highly polymerized silica gel,with particle sizes around 1μm.The low-temperature environment retarded the carbonation reaction rate and affected the morphology and crystallization of calcium carbonate.After 480 min of carbonation,the specific surface area and porosity of MS increased substantially by 740%and 144.6%,respectively,indicating improved reactivity.The microstructure of carbonated MS became denser with calcite particles surrounded by silica gel.This study demonstrates that wet carbonation of MS at 0℃significantly enhances its properties,creating an ultrafine supplementary cementitious material with considerable CO_(2)sequestration capacity.
