Due to the long-term plate tectonic movements in southwestern China,the in-situ stress field in deep formations is complex.When passing through deep soft-rock mass under non-hydrostatic high in-situ stress field,tunne...Due to the long-term plate tectonic movements in southwestern China,the in-situ stress field in deep formations is complex.When passing through deep soft-rock mass under non-hydrostatic high in-situ stress field,tunnels will suffer serious asymmetric deformation.There is no available support design method for tunnels under such a situation in existing studies to clarify the support time and support stiffness.This study first analyzed the mechanical behavior of tunnels in non-hydrostatic in-situ stress field and derived the theoretical equations of the ground squeezing curve(GSC)and ground loosening curve(GLC).Then,based on the convergence confinement theory,the support design method of deep soft-rock tunnels under non-hydrostatic high in-situ stress field was established considering both squeezing and loosening pressures.In addition,this method can provide the clear support time and support stiffness of the second layer of initial support.The proposed design method was applied to the Wanhe tunnel of the China-Laos railway in China.Monitoring data indicated that the optimal support scheme had a good effect on controlling the tunnel deformation in non-hydrostatic high in-situ stress field.Field applications showed that the secondary lining could be constructed properly.展开更多
As mining and civil tunneling progresses to depth, excavation-induced seismicity and rockburst problems increase and cannot be prevented. As an important line of defense, ground control measures and burst-resistant ro...As mining and civil tunneling progresses to depth, excavation-induced seismicity and rockburst problems increase and cannot be prevented. As an important line of defense, ground control measures and burst-resistant rock support are used to prevent or minimize damage to excavations and thus to enhance workplace safety. Rock support in burst-prone ground differs from conventional rock support where controlling gravity-induced rockfalls and managing shallow zones of loose rock are the main target. Rock support in burst-prone ground needs to resist dynamic loads and large rock dilation due to violent rock failure. After reviewing the rockburst phenomenon, types of rockbursts, damage mechanisms, and rockburst support design principles and acceptability criteria, this paper describes that the support selection process in burst-prone ground is iterative, requiring design verification and modification based on field observations. An interactive design tool for conducting rockburst support design in underground tunnels is introduced to facilitate cost-effective design.展开更多
As mines go deeper,mine designs become more fragile and effective rock support becomes a strategic element for ground control to facilitate timely construction and cost-effective access for uninterrupted production.Th...As mines go deeper,mine designs become more fragile and effective rock support becomes a strategic element for ground control to facilitate timely construction and cost-effective access for uninterrupted production.This article focuses on the design of integrated support systems for brittle ground when large displacements due to gradual bulking of stress-fractured rock or sudden violent bulking during rockbursts are induced by static and dynamic loading.It provides an overview of support design principles for a rational approach to ground control in deep mines when large deformations are anticipated near excavations.Such designs must not only account for load equilibrium but also for deformation compatibility.Most importantly,the design approach must account for the fact that the support’s displacement capacity is being consumed as it is deformed after support installation.It is therefore necessary to design for the remnant support capacity,i.e.the capacity remaining when the support is needed.Furthermore,if the support capacity can be consumed,it can also be restored by means of preventive support maintenance(PSM).The PSM concept for cost-effective ground control is introduced and illustrated by quantitative and operational evidence.Contrary to other design approaches,the deformation-based support design(DBSD)approach provides the capacity of an integrated support system as a function of imposed displacements.Reduction in this support capacity due to mininginduced deformation renders excavations increasingly more vulnerable if located within the influence of active mining and seismic activity.Because deformation measurements are robust indicators of the decay in support capacity,scanning and other displacement monitoring technologies enable measurements to verify the DBSD approach,to assess the remnant safety margin of the deformed support,and to make operational support maintenance decisions.展开更多
This paper presents an investigation on the characteristics of overlying strata collapse and mining-induced pressure in fault-influenced zone by employing the physical modeling in consideration of fault structure. The...This paper presents an investigation on the characteristics of overlying strata collapse and mining-induced pressure in fault-influenced zone by employing the physical modeling in consideration of fault structure. The precursory information of fault slip during the underground mining activities is studied as well. Based on the physical modeling, the optimization of roadway support design and the field verification in fault-influenced zone are conducted. Physical modeling results show that, due to the combined effect of mining activities and fault slip, the mining-induced pressure and the extent of damaged rock masses in the fault-influenced zone are greater than those in the uninfluenced zone. The sharp increase and the succeeding stabilization of stress or steady increase in displacement can be identified as the precursory information of fault slip. Considering the larger mining-induced pressure in the fault-influenced zone, the new support design utilizing cables is proposed. The optimization of roadway support design suggests that the cables can be anchored in the stable surrounding rocks and can effectively mobilize the load bearing capacity of the stable surrounding rocks. The field observation indicates that the roadway is in good condition with the optimized roadway support design.展开更多
There are considerable challenges associated with the design of ground support for seismically-active underground mines.It is extremely difficult to establish the demand on ground support as well as the capacity of a ...There are considerable challenges associated with the design of ground support for seismically-active underground mines.It is extremely difficult to establish the demand on ground support as well as the capacity of a ground support system.The resulting dynamic or impact loads caused by mining-induced seismicity are difficult to anticipate and quantify.The performance of a ground support system is defined by the load distribution and interaction between several reinforcement and surface support elements.Consequently,the design of ground support in seismically-active mines tends to evolve,or be modified based on qualitative assessments of perceived performance or response to significant seismic events or rockbursts.This research is motivated by a need to provide quantitative and data-driven design guidelines for ground support systems subjected to dynamic-loading conditions.Rockburst data were collected from three deep and seismically-active underground mines in the Sudbury basin in Canada.The constructed database comprises 209 seismic events that resulted in damage to mine excavations and ground support.These events were associated with damage at 324 locations within the three mines.The developed ground support design strategy,based on these documented case studies,identifies areas where the use of dynamic or enhanced support should be employed.The developed design methodology provides guidelines for the zoning of mine locations in which installation of enhanced support is recommended,the specifications for an optimal ground support system,and the timing or sequence of installation.展开更多
In the course of network supported collaborative design, the data processing plays a very vital role. Much effort has been spent in this area, and many kinds of approaches have been proposed. Based on the correlative ...In the course of network supported collaborative design, the data processing plays a very vital role. Much effort has been spent in this area, and many kinds of approaches have been proposed. Based on the correlative materials, this paper presents extensible markup language (XML) based strategy for several important problems of data processing in network supported collaborative design, such as the representation of standard for the exchange of product model data (STEP) with XML in the product information expression and the management of XML documents using relational database. The paper gives a detailed exposition on how to clarify the mapping between XML structure and the relationship database structure and how XML-QL queries can be translated into structured query language (SQL) queries. Finally, the structure of data processing system based on XML is presented.展开更多
An exact-designed mesh shape with favorable surface accuracy is of practical significance to the performance of large cable-network antenna reflectors. In this study, a novel design approach that could guide the gener...An exact-designed mesh shape with favorable surface accuracy is of practical significance to the performance of large cable-network antenna reflectors. In this study, a novel design approach that could guide the generation of exact spatial parabolic mesh configurations of such reflector was proposed. By incorporating the traditional force density method with the standard finite element method, this proposed approach had taken the deformation effects of flexible ring truss supports into consideration, and searched for the desired mesh shapes that can satisfy the requirement that all the free nodes are exactly located on the objective paraboloid. Compared with the conventional design method,a remarkable improvement of surface accuracy in the obtained mesh shapes had been demonstrated by numerical examples. The present work would provide a helpful technical reference for the mesh shape design of such cable-network antenna reflector in engineering practice.展开更多
Backfill hydraulic support is the key equipment in achieving coal mining and solid backfilling simultaneously in solid backfill mining technology.Based on the summary and analysis of main types,basic structural proper...Backfill hydraulic support is the key equipment in achieving coal mining and solid backfilling simultaneously in solid backfill mining technology.Based on the summary and analysis of main types,basic structural properties and filed application of backfill hydraulic support,this work has firstly proposed the basic principle of backfill hydraulic support optimization design and provided the method of optimal design of key structural components,like four-bar linkage,rear canopy and tamping structure;the method is further elaborated as changing hinging position of upper bar to optimize four-bar linkage,by lengthening or shortening the rear canopy to optimize length ratio of canopy;and by changing length and hinging position of tamping structure as well as suspension height of backfill scrape conveyor to realize optimization of tamping structure.On this basis,the process of optimal design of backfill hydraulic support is built.The optimal design case of ZC5200/14.5/30 six columns-four bar linkage used in 7203 W workface of Zhaizhen Coal Mine shows that the backfill properties like horizontal roof gap,vertical horizontal gap,tamping angle and tamping head gap are improved obviously through optimizing four-bar linkage,canopy length and tamping structure according to the optimal design method proposed in this work.展开更多
Using virtual reality to design a new type of hydraulic support is discussed.That is how to make use of the virtual design to develop coal mining machine in practice. Theadvantages of virtual design are studied and th...Using virtual reality to design a new type of hydraulic support is discussed.That is how to make use of the virtual design to develop coal mining machine in practice. Theadvantages of virtual design are studied and the simple virtual reality system is built. The 3Dparts and elements of hydraulic support are modeled with parametric design in CAD software, thenexported to VR environment, in which the virtual hydraulic support is assembled, operated andtested. With the method, the errors and faults of design can be fined easily, many improvements aremade and the new hydraulic support is developed successfully.展开更多
This study presents a decision-support tool for preliminary design of a horizontal wind turbine system. The function of this tool is to assist the various actors in making decisions about choices inherent to their act...This study presents a decision-support tool for preliminary design of a horizontal wind turbine system. The function of this tool is to assist the various actors in making decisions about choices inherent to their activities in the field of wind energy. Wind turbine cost and site characteristics are taken into account in the used models which are mainly based on the engineering knowledge. The present tool uses a constraint-modelling technique in combination with a CSP solver (numerical CSPs which are based on an arithmetic interval). In this way, it generates solutions and automatically performs the concept selection and costing of a given wind turbine. The data generated by the tool and required for decision making are: the quality index of solution (wind turbine), the amount of energy produced, the total cost of the wind turbine and the design variables which define the architecture of the wind turbine system. When applied to redesign a standard wind turbine in adequacy with a given site, the present tool proved both its ability to implement constraint modelling and its usefulness in conducting an appraisal.展开更多
The deformation and failure mechanical mechanism in soft rock roadway is related to the stability of supported tunnels, which is important to coal mine production and construction. By physical mechanics experiments an...The deformation and failure mechanical mechanism in soft rock roadway is related to the stability of supported tunnels, which is important to coal mine production and construction. By physical mechanics experiments and X-ray diffraction (XRD) tests, the engineering mechanical properties of soft rock, as well as main mineral composition of the surrounding soft rock of Qigou Coal Mine, were obtained. Based on analysis results, a method using bolt-beam-net combination to support was put forward. Mechanical analysis of the support form was done by using the calculation software FLAC3D. Results show that clay minerals of this mine are kaolinite and illite mixed layer, of which the water absorption is relatively obvious and presented mudding characteristic after absorbing water, with the plasticity index of 0.35, with small expansibility, which is weakly consolidated colloid with strong connected force in unit cell. The rock blocks have the characteristics of moisture absorption softening, and the deformation mechanical mechanism of which is with the coexistence of molecular expansive mechanism, colloid expansive mechanism, and weak layer trend type. The calculation results show that the bolt-beam-net support structure makes the bolt, beam, and roof deform compatibly. The beams make the force in the bolt relatively homogeneous, which restricts the displacement of the tunnel roof as well. Finally, using in situ monitoring, the numerical results were verified.展开更多
EAST is a full superconducting tokamak with an elongated plasma cross-section. It consists of supercon- ducting poloidal field (PF) magnet system, toroidal field (TF) magnet system, vacuum vessel with inner parts, the...EAST is a full superconducting tokamak with an elongated plasma cross-section. It consists of supercon- ducting poloidal field (PF) magnet system, toroidal field (TF) magnet system, vacuum vessel with inner parts, ther- mal shields and cryostat vessel. The mission of the project is to widely investigate both physics and technologies of advanced tokamak operations, especially the mechanism of power and particle handling for steady-state operations. The cryogenic component is mainly composed of superconducting TF and superconducting PF coils that ensure the ability of sustaining magnetic field for plasma confinement, control and shaping in steady-state. This report describes the process of the structure design of cryogenic component support for EAST.展开更多
Background: Promoting breastfeeding support by public health nurses (PHN) requires first that the support which they currently provide to be assessed. However, there is no assessment tool for this purpose. The aim of ...Background: Promoting breastfeeding support by public health nurses (PHN) requires first that the support which they currently provide to be assessed. However, there is no assessment tool for this purpose. The aim of this study was therefore to develop a scale to assess breastfeeding support currently provided by PHN. Methods: We developed the Practice of Breastfeeding Support Scale (PBSS) for PHN based on the results of a previous study. The content validity of the PBSS was established through discussion with three other researchers. A pilot study was conducted to confirm face validity. To confirm reliability and validity, an anonymous, self-reported questionnaire was sent to PHN working in municipal offices. The statistical analyses included the Kaiser-Meyer-Olkin (KMO), Barlett’s Test of Sphericity, exploratory factor analysis (EFA), Cronbach’s alpha and correlation coefficient. Results: 768 PHN participated in this study. Cronbach’s alpha of PBSS was 0.85. The KMO measure was 0.892, and Bartlett’s Test of Sphericity was p Conclusion: The reliability and validity of PBSS were confirmed. These findings suggested that the PBSS has the potential to help promote breastfeeding support by PHN by clarifying their current breastfeeding support practices and related factors.展开更多
Since it takes a long time to design an aircraft, the succession to or the acquirement of knowledges and technologies is a key to provide to aircraft design high quality and productivity. This paper describes a comput...Since it takes a long time to design an aircraft, the succession to or the acquirement of knowledges and technologies is a key to provide to aircraft design high quality and productivity. This paper describes a computer support system for wing design using a new tool based on an object-oriented approach. The system is programmed in a module of objects which represent design tasks or design knowledges. The modulated program gives advantages to maintain and extend the system easily. The system provides to users a flexible support with excellent user interface which consists of mouse, menu-driven system, and window system.展开更多
The paper gives a detail analysis on the necessity of rapid hydraulic support design, and presents a computer-aided rapid variant design system for hydraulic support. The system integrates the type selection and embod...The paper gives a detail analysis on the necessity of rapid hydraulic support design, and presents a computer-aided rapid variant design system for hydraulic support. The system integrates the type selection and embodiment design of hydraulic support. Case-based reasoning and rule-based reasoning are the main reasoning methods. Several crucial problems are discussed.展开更多
Attention is concentrated on how to perform the innovative design during the process of pumping unit conceptual design, and how to enhance design efficiency and inspire creativity. Aiming at the shortages of conceptua...Attention is concentrated on how to perform the innovative design during the process of pumping unit conceptual design, and how to enhance design efficiency and inspire creativity. Aiming at the shortages of conceptual design, introducing the theory of inventive problem solving (TRIZ) into the mechanical product design for producing innovative ideas, and using the advanced computer-aided technique, the intelligent decision support system (IDSS) based on TRIZ (TRIZ-IDSS) has been constructed. The construction method, system structure, conceptual production, decisionmaking and evaluation of the problem solving subsystem are discussed. The innovative conceptual design of pumping units indicates that the system can help the engineers open up a new space of thinking, overcome the thinking inertia, and put forward innovative design concepts. This system also can offer the scientific instructions for the innovative design of mechanical products.展开更多
In order to solve the problem of surrounding rock control in soft coal seam roadway, taking the centralized return airway of No. 2 coal seam in Liangdu Coal Industry as the research background, the mechanical con...In order to solve the problem of surrounding rock control in soft coal seam roadway, taking the centralized return airway of No. 2 coal seam in Liangdu Coal Industry as the research background, the mechanical conditions of roadway surrounding rock were analyzed by means of field investigation, rock mechanics experiment and numerical simulation. The design principles of roadway support in soft coal seam were put forward: high strength anchor cable support, high preload support and high stiffness support. The bearing capacity of surrounding rock was strengthened by anchor cable support, and the deformation and failure of surrounding rock were effectively controlled. Through the numerical simulation method, the deformation and plastic failure range of roadwaysunder different support schemes are compared and analyzed. The support scheme of centralized transportation roadway is studied and determined, and the field test is carried out, which effectively controls the deformation of surrounding rock of roadway in weak coal seam.展开更多
In aircraft structural dynamic design the matching of guns with their supporting structure is one of the most important tasks on which hinges the success or failure of the structural design. The design curves for matc...In aircraft structural dynamic design the matching of guns with their supporting structure is one of the most important tasks on which hinges the success or failure of the structural design. The design curves for matching guns with their supporting structure can be obtained from response calculations of the plate-spring system supporting the gun on the ground,the model structure tested on the ground and the actual structure.A set of matching curves is given for engineering application.Then,the matching design can be accomplished by means of impact load spectrograms so as to perform an optimal structural design and to make further improvements on dynamic design program.展开更多
The tunnel support system is composed of lining,bolt,and steel frame.It is of great significance to effectively control the deformation of the surrounding rock of the tunnel,make full use of the characteristics of dif...The tunnel support system is composed of lining,bolt,and steel frame.It is of great significance to effectively control the deformation of the surrounding rock of the tunnel,make full use of the characteristics of different support methods,and formulate an economical and effective support plan to ensure the safe operation of the tunnel structure.This paper clarifies the synergistic relationship between the support structure and the surrounding rock based on their fundamental characteristics and functions.Various support structures and components are also discussed in this paper.Additionally,the paper presents an optimized design of the tunnel support structure system.展开更多
基金Project(52178402)supported by the National Natural Science Foundation of ChinaProject(2021-Key-09)supported by the Science and Technology Research and Development Program Project of China Railway Group LimitedProject(2021zzts0216)supported by the Innovation-Driven Project of Central South University,China。
文摘Due to the long-term plate tectonic movements in southwestern China,the in-situ stress field in deep formations is complex.When passing through deep soft-rock mass under non-hydrostatic high in-situ stress field,tunnels will suffer serious asymmetric deformation.There is no available support design method for tunnels under such a situation in existing studies to clarify the support time and support stiffness.This study first analyzed the mechanical behavior of tunnels in non-hydrostatic in-situ stress field and derived the theoretical equations of the ground squeezing curve(GSC)and ground loosening curve(GLC).Then,based on the convergence confinement theory,the support design method of deep soft-rock tunnels under non-hydrostatic high in-situ stress field was established considering both squeezing and loosening pressures.In addition,this method can provide the clear support time and support stiffness of the second layer of initial support.The proposed design method was applied to the Wanhe tunnel of the China-Laos railway in China.Monitoring data indicated that the optimal support scheme had a good effect on controlling the tunnel deformation in non-hydrostatic high in-situ stress field.Field applications showed that the secondary lining could be constructed properly.
文摘As mining and civil tunneling progresses to depth, excavation-induced seismicity and rockburst problems increase and cannot be prevented. As an important line of defense, ground control measures and burst-resistant rock support are used to prevent or minimize damage to excavations and thus to enhance workplace safety. Rock support in burst-prone ground differs from conventional rock support where controlling gravity-induced rockfalls and managing shallow zones of loose rock are the main target. Rock support in burst-prone ground needs to resist dynamic loads and large rock dilation due to violent rock failure. After reviewing the rockburst phenomenon, types of rockbursts, damage mechanisms, and rockburst support design principles and acceptability criteria, this paper describes that the support selection process in burst-prone ground is iterative, requiring design verification and modification based on field observations. An interactive design tool for conducting rockburst support design in underground tunnels is introduced to facilitate cost-effective design.
基金the financial support of NSERC(Canada’s Natural Sciences and Engineering Research Council)ORF(Ontario Research Fund)part of the SUMIT(Smart Underground Monitoring and Integrated Technologies for deep mining)program at the Centre of Excellence for Mining Innovation(CEMI)。
文摘As mines go deeper,mine designs become more fragile and effective rock support becomes a strategic element for ground control to facilitate timely construction and cost-effective access for uninterrupted production.This article focuses on the design of integrated support systems for brittle ground when large displacements due to gradual bulking of stress-fractured rock or sudden violent bulking during rockbursts are induced by static and dynamic loading.It provides an overview of support design principles for a rational approach to ground control in deep mines when large deformations are anticipated near excavations.Such designs must not only account for load equilibrium but also for deformation compatibility.Most importantly,the design approach must account for the fact that the support’s displacement capacity is being consumed as it is deformed after support installation.It is therefore necessary to design for the remnant support capacity,i.e.the capacity remaining when the support is needed.Furthermore,if the support capacity can be consumed,it can also be restored by means of preventive support maintenance(PSM).The PSM concept for cost-effective ground control is introduced and illustrated by quantitative and operational evidence.Contrary to other design approaches,the deformation-based support design(DBSD)approach provides the capacity of an integrated support system as a function of imposed displacements.Reduction in this support capacity due to mininginduced deformation renders excavations increasingly more vulnerable if located within the influence of active mining and seismic activity.Because deformation measurements are robust indicators of the decay in support capacity,scanning and other displacement monitoring technologies enable measurements to verify the DBSD approach,to assess the remnant safety margin of the deformed support,and to make operational support maintenance decisions.
基金financially supported by the National Natural Science Foundation of China(No.41502184)Beijing Natural Science Foundation(No.2164067)+2 种基金National Key Research and Development Program(No.2016YFC0801401)Fundamental Research Funds for the Central Universities(No.2014QL01)Innovation Training Programs for Undergraduate Students(Nos.201411413054 and SKLCRSM14CXJH08)
文摘This paper presents an investigation on the characteristics of overlying strata collapse and mining-induced pressure in fault-influenced zone by employing the physical modeling in consideration of fault structure. The precursory information of fault slip during the underground mining activities is studied as well. Based on the physical modeling, the optimization of roadway support design and the field verification in fault-influenced zone are conducted. Physical modeling results show that, due to the combined effect of mining activities and fault slip, the mining-induced pressure and the extent of damaged rock masses in the fault-influenced zone are greater than those in the uninfluenced zone. The sharp increase and the succeeding stabilization of stress or steady increase in displacement can be identified as the precursory information of fault slip. Considering the larger mining-induced pressure in the fault-influenced zone, the new support design utilizing cables is proposed. The optimization of roadway support design suggests that the cables can be anchored in the stable surrounding rocks and can effectively mobilize the load bearing capacity of the stable surrounding rocks. The field observation indicates that the roadway is in good condition with the optimized roadway support design.
文摘There are considerable challenges associated with the design of ground support for seismically-active underground mines.It is extremely difficult to establish the demand on ground support as well as the capacity of a ground support system.The resulting dynamic or impact loads caused by mining-induced seismicity are difficult to anticipate and quantify.The performance of a ground support system is defined by the load distribution and interaction between several reinforcement and surface support elements.Consequently,the design of ground support in seismically-active mines tends to evolve,or be modified based on qualitative assessments of perceived performance or response to significant seismic events or rockbursts.This research is motivated by a need to provide quantitative and data-driven design guidelines for ground support systems subjected to dynamic-loading conditions.Rockburst data were collected from three deep and seismically-active underground mines in the Sudbury basin in Canada.The constructed database comprises 209 seismic events that resulted in damage to mine excavations and ground support.These events were associated with damage at 324 locations within the three mines.The developed ground support design strategy,based on these documented case studies,identifies areas where the use of dynamic or enhanced support should be employed.The developed design methodology provides guidelines for the zoning of mine locations in which installation of enhanced support is recommended,the specifications for an optimal ground support system,and the timing or sequence of installation.
基金supported by National High Technology Research and Development Program of China (863 Program) (No. AA420060)
文摘In the course of network supported collaborative design, the data processing plays a very vital role. Much effort has been spent in this area, and many kinds of approaches have been proposed. Based on the correlative materials, this paper presents extensible markup language (XML) based strategy for several important problems of data processing in network supported collaborative design, such as the representation of standard for the exchange of product model data (STEP) with XML in the product information expression and the management of XML documents using relational database. The paper gives a detailed exposition on how to clarify the mapping between XML structure and the relationship database structure and how XML-QL queries can be translated into structured query language (SQL) queries. Finally, the structure of data processing system based on XML is presented.
文摘An exact-designed mesh shape with favorable surface accuracy is of practical significance to the performance of large cable-network antenna reflectors. In this study, a novel design approach that could guide the generation of exact spatial parabolic mesh configurations of such reflector was proposed. By incorporating the traditional force density method with the standard finite element method, this proposed approach had taken the deformation effects of flexible ring truss supports into consideration, and searched for the desired mesh shapes that can satisfy the requirement that all the free nodes are exactly located on the objective paraboloid. Compared with the conventional design method,a remarkable improvement of surface accuracy in the obtained mesh shapes had been demonstrated by numerical examples. The present work would provide a helpful technical reference for the mesh shape design of such cable-network antenna reflector in engineering practice.
基金Project(2017QNA21)supported by the Fundamental Research Funds for the Central Universities of ChinaProject supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD),China
文摘Backfill hydraulic support is the key equipment in achieving coal mining and solid backfilling simultaneously in solid backfill mining technology.Based on the summary and analysis of main types,basic structural properties and filed application of backfill hydraulic support,this work has firstly proposed the basic principle of backfill hydraulic support optimization design and provided the method of optimal design of key structural components,like four-bar linkage,rear canopy and tamping structure;the method is further elaborated as changing hinging position of upper bar to optimize four-bar linkage,by lengthening or shortening the rear canopy to optimize length ratio of canopy;and by changing length and hinging position of tamping structure as well as suspension height of backfill scrape conveyor to realize optimization of tamping structure.On this basis,the process of optimal design of backfill hydraulic support is built.The optimal design case of ZC5200/14.5/30 six columns-four bar linkage used in 7203 W workface of Zhaizhen Coal Mine shows that the backfill properties like horizontal roof gap,vertical horizontal gap,tamping angle and tamping head gap are improved obviously through optimizing four-bar linkage,canopy length and tamping structure according to the optimal design method proposed in this work.
基金This project is supported by National Natural Science Foundation of China(No.59734090)Selected from Proceedings of 2000 the First International Conference on mechanical Engineering
文摘Using virtual reality to design a new type of hydraulic support is discussed.That is how to make use of the virtual design to develop coal mining machine in practice. Theadvantages of virtual design are studied and the simple virtual reality system is built. The 3Dparts and elements of hydraulic support are modeled with parametric design in CAD software, thenexported to VR environment, in which the virtual hydraulic support is assembled, operated andtested. With the method, the errors and faults of design can be fined easily, many improvements aremade and the new hydraulic support is developed successfully.
文摘This study presents a decision-support tool for preliminary design of a horizontal wind turbine system. The function of this tool is to assist the various actors in making decisions about choices inherent to their activities in the field of wind energy. Wind turbine cost and site characteristics are taken into account in the used models which are mainly based on the engineering knowledge. The present tool uses a constraint-modelling technique in combination with a CSP solver (numerical CSPs which are based on an arithmetic interval). In this way, it generates solutions and automatically performs the concept selection and costing of a given wind turbine. The data generated by the tool and required for decision making are: the quality index of solution (wind turbine), the amount of energy produced, the total cost of the wind turbine and the design variables which define the architecture of the wind turbine system. When applied to redesign a standard wind turbine in adequacy with a given site, the present tool proved both its ability to implement constraint modelling and its usefulness in conducting an appraisal.
基金Supported by the Natural Science Foundation of China (50974126) the Specific Scientific Research Fund for Doctorial Subject (20100023120003) the Major Science and Technology Projects funded by the Ministry of Education (109034)
文摘The deformation and failure mechanical mechanism in soft rock roadway is related to the stability of supported tunnels, which is important to coal mine production and construction. By physical mechanics experiments and X-ray diffraction (XRD) tests, the engineering mechanical properties of soft rock, as well as main mineral composition of the surrounding soft rock of Qigou Coal Mine, were obtained. Based on analysis results, a method using bolt-beam-net combination to support was put forward. Mechanical analysis of the support form was done by using the calculation software FLAC3D. Results show that clay minerals of this mine are kaolinite and illite mixed layer, of which the water absorption is relatively obvious and presented mudding characteristic after absorbing water, with the plasticity index of 0.35, with small expansibility, which is weakly consolidated colloid with strong connected force in unit cell. The rock blocks have the characteristics of moisture absorption softening, and the deformation mechanical mechanism of which is with the coexistence of molecular expansive mechanism, colloid expansive mechanism, and weak layer trend type. The calculation results show that the bolt-beam-net support structure makes the bolt, beam, and roof deform compatibly. The beams make the force in the bolt relatively homogeneous, which restricts the displacement of the tunnel roof as well. Finally, using in situ monitoring, the numerical results were verified.
文摘EAST is a full superconducting tokamak with an elongated plasma cross-section. It consists of supercon- ducting poloidal field (PF) magnet system, toroidal field (TF) magnet system, vacuum vessel with inner parts, ther- mal shields and cryostat vessel. The mission of the project is to widely investigate both physics and technologies of advanced tokamak operations, especially the mechanism of power and particle handling for steady-state operations. The cryogenic component is mainly composed of superconducting TF and superconducting PF coils that ensure the ability of sustaining magnetic field for plasma confinement, control and shaping in steady-state. This report describes the process of the structure design of cryogenic component support for EAST.
文摘Background: Promoting breastfeeding support by public health nurses (PHN) requires first that the support which they currently provide to be assessed. However, there is no assessment tool for this purpose. The aim of this study was therefore to develop a scale to assess breastfeeding support currently provided by PHN. Methods: We developed the Practice of Breastfeeding Support Scale (PBSS) for PHN based on the results of a previous study. The content validity of the PBSS was established through discussion with three other researchers. A pilot study was conducted to confirm face validity. To confirm reliability and validity, an anonymous, self-reported questionnaire was sent to PHN working in municipal offices. The statistical analyses included the Kaiser-Meyer-Olkin (KMO), Barlett’s Test of Sphericity, exploratory factor analysis (EFA), Cronbach’s alpha and correlation coefficient. Results: 768 PHN participated in this study. Cronbach’s alpha of PBSS was 0.85. The KMO measure was 0.892, and Bartlett’s Test of Sphericity was p Conclusion: The reliability and validity of PBSS were confirmed. These findings suggested that the PBSS has the potential to help promote breastfeeding support by PHN by clarifying their current breastfeeding support practices and related factors.
文摘Since it takes a long time to design an aircraft, the succession to or the acquirement of knowledges and technologies is a key to provide to aircraft design high quality and productivity. This paper describes a computer support system for wing design using a new tool based on an object-oriented approach. The system is programmed in a module of objects which represent design tasks or design knowledges. The modulated program gives advantages to maintain and extend the system easily. The system provides to users a flexible support with excellent user interface which consists of mouse, menu-driven system, and window system.
文摘The paper gives a detail analysis on the necessity of rapid hydraulic support design, and presents a computer-aided rapid variant design system for hydraulic support. The system integrates the type selection and embodiment design of hydraulic support. Case-based reasoning and rule-based reasoning are the main reasoning methods. Several crucial problems are discussed.
文摘Attention is concentrated on how to perform the innovative design during the process of pumping unit conceptual design, and how to enhance design efficiency and inspire creativity. Aiming at the shortages of conceptual design, introducing the theory of inventive problem solving (TRIZ) into the mechanical product design for producing innovative ideas, and using the advanced computer-aided technique, the intelligent decision support system (IDSS) based on TRIZ (TRIZ-IDSS) has been constructed. The construction method, system structure, conceptual production, decisionmaking and evaluation of the problem solving subsystem are discussed. The innovative conceptual design of pumping units indicates that the system can help the engineers open up a new space of thinking, overcome the thinking inertia, and put forward innovative design concepts. This system also can offer the scientific instructions for the innovative design of mechanical products.
文摘In order to solve the problem of surrounding rock control in soft coal seam roadway, taking the centralized return airway of No. 2 coal seam in Liangdu Coal Industry as the research background, the mechanical conditions of roadway surrounding rock were analyzed by means of field investigation, rock mechanics experiment and numerical simulation. The design principles of roadway support in soft coal seam were put forward: high strength anchor cable support, high preload support and high stiffness support. The bearing capacity of surrounding rock was strengthened by anchor cable support, and the deformation and failure of surrounding rock were effectively controlled. Through the numerical simulation method, the deformation and plastic failure range of roadwaysunder different support schemes are compared and analyzed. The support scheme of centralized transportation roadway is studied and determined, and the field test is carried out, which effectively controls the deformation of surrounding rock of roadway in weak coal seam.
文摘In aircraft structural dynamic design the matching of guns with their supporting structure is one of the most important tasks on which hinges the success or failure of the structural design. The design curves for matching guns with their supporting structure can be obtained from response calculations of the plate-spring system supporting the gun on the ground,the model structure tested on the ground and the actual structure.A set of matching curves is given for engineering application.Then,the matching design can be accomplished by means of impact load spectrograms so as to perform an optimal structural design and to make further improvements on dynamic design program.
文摘The tunnel support system is composed of lining,bolt,and steel frame.It is of great significance to effectively control the deformation of the surrounding rock of the tunnel,make full use of the characteristics of different support methods,and formulate an economical and effective support plan to ensure the safe operation of the tunnel structure.This paper clarifies the synergistic relationship between the support structure and the surrounding rock based on their fundamental characteristics and functions.Various support structures and components are also discussed in this paper.Additionally,the paper presents an optimized design of the tunnel support structure system.