The support layer is an important component of twin-block ballastless track. The modulus of the support layer is an important design parameter and must be carefully solved. We studied the bending stress and deformatio...The support layer is an important component of twin-block ballastless track. The modulus of the support layer is an important design parameter and must be carefully solved. We studied the bending stress and deformation of track slab and support layer due to train load using the beam-plate finite element model on elastic foundation. The results show that support layer type has great impact on both support layer deformation and the stress on subgrade, but has little impact on the bending stress of either track slab or support layer. The continuous support layer type, and articulated support layer type with shear transfer device at their ends, are recommended. In order to keep the stress in the support layer less than that in track slab, the modulus of the continuous, unit, and articulated types of support layer （ in unit twin-block ballastless track）, and the support layer in continuous twin-block ballastless track, should not be larger than 15, 22, 20.5 and 5 GPa, respectively. In addition, the modulus of the unit-type support layer should not be more than 20 GPa, to ensure the step in support layer remains less than 1 mm.展开更多
The composite separator comprising of polysulfone and zirconia was prepared by phase inversion precipitation technique. The influence of manufacturing parameters on its properties was investigated, and the results sho...The composite separator comprising of polysulfone and zirconia was prepared by phase inversion precipitation technique. The influence of manufacturing parameters on its properties was investigated, and the results show that the manufacturing parameters affect the ionic resistance and maximum pore size significantly. A modified composite separator with a support layer was prepared to enhance the tensile strength of separator. By adding support layer, the tensile strength of the separator increases from 1.85MPa to 13.66MPa. In order to evaluate the practical applicability of the composite separator, a small-scale industrial electrolytic experiment was conducted to investigate the changes of cell voltage, gas purity and separator stability. The results show that the modified composite separator has a smaller cell voltage and a higher H2 purity than the asbestos separator, and are promising material for industrial hydrogen production.展开更多
Hydrogen separation through oxygen transport membranes(OTMs)has attracted much attention.Asymmetric membranes with thin dense layers provide low bulk diffusion resistances and high overall hydrogen separation performa...Hydrogen separation through oxygen transport membranes(OTMs)has attracted much attention.Asymmetric membranes with thin dense layers provide low bulk diffusion resistances and high overall hydrogen separation performances.However,the resistance in the porous support layer(PSL)limits the overall separation performance significantly.Engineering the structure of the PSL is an appropriate way to enable fast gas transport and increase the separation performance.There is no relevant research on studying the influence of the PSL on hydrogen separation performance so far.Herein,we prepared Ce0.85Sm0.15O1.925–Sm0.6Sr0.4Cr0.3Fe0.7O3-δ(SDC-SSCF)asymmetric membranes with straight grooves in PSL by tape-casting and laser grooving.A~30%improvement in the hydrogen separation rate was achieved by grooving in the PSLs.It indicates that the grooves may reduce the concentration polarization resistance in PSL for the hydrogen separation process.This work provides a straight evidence on optimizing the structures of PSL for improving the hydrogen separation performance of the membrane reactors.展开更多
This paper reports a new route for the preparation of layered alpha-zirconium phosphate （α-ZrP）-supported metalloporphyrin MnTMPyP. MnTMPyP was intercalated into α-ZrP using α-ZrP.BA （i.e. pre-intercalated bulty...This paper reports a new route for the preparation of layered alpha-zirconium phosphate （α-ZrP）-supported metalloporphyrin MnTMPyP. MnTMPyP was intercalated into α-ZrP using α-ZrP.BA （i.e. pre-intercalated bultylamine was arranged by a monolayer mode in α-ZrP） as a starting material. The catalytic activity of the supported material for homovanillic acid （HVA） oxidation was investigated. The results showed a promising layered material-supported catalyst in catalytic system.展开更多
Metal–organic-framework(MOF)has been an increasingly hot organic-inorganic hybrid compounds. Here we develop an innovative concept by engineering a supporting layer made of MOF derived carbon materials. The supportin...Metal–organic-framework(MOF)has been an increasingly hot organic-inorganic hybrid compounds. Here we develop an innovative concept by engineering a supporting layer made of MOF derived carbon materials. The supporting thin layer is prepared by carbonizing zeolitic-imidazole framework(ZIF-67). CdSe quantum dot sensitized TiO_2 nanocrystalline thin film deposited by the method of chemical bath deposition(CBD). The MOF unique microstructure in the support layer builds the electronic highway, which greatly improves the efficiency of the CdSe quantum dot-sensitized solar cells(QDSSCs), and the power conversion efficiency(PCE)of the device was significantly improved from 2.98% to 5.79% via ZIF-67 derived carbon supporting thin layer.展开更多
This paper focuses on some application issues in m.multi-layered perceptrons researches. The following problem areas are discussed: (1) the classification capability of multi-layered perceptrons; (2) theself-configura...This paper focuses on some application issues in m.multi-layered perceptrons researches. The following problem areas are discussed: (1) the classification capability of multi-layered perceptrons; (2) theself-configuration algorithm for facilitating the design of the neural nets' structure;and,finally (3) the application of the fast BP algorithm to speed up the learning procedure. Some experimental results with respect to the application of multi-layered perceptrons as classifier systems in the comprehensive evaluation of Chinese large cities are presented.展开更多
基金The National Natural Science Foundation of China(Director Program)(No.50848015)the Innovative Research Team Incubation Financing Projects of Southwest Jiaotong University(No.2007IRT06)
文摘The support layer is an important component of twin-block ballastless track. The modulus of the support layer is an important design parameter and must be carefully solved. We studied the bending stress and deformation of track slab and support layer due to train load using the beam-plate finite element model on elastic foundation. The results show that support layer type has great impact on both support layer deformation and the stress on subgrade, but has little impact on the bending stress of either track slab or support layer. The continuous support layer type, and articulated support layer type with shear transfer device at their ends, are recommended. In order to keep the stress in the support layer less than that in track slab, the modulus of the continuous, unit, and articulated types of support layer （ in unit twin-block ballastless track）, and the support layer in continuous twin-block ballastless track, should not be larger than 15, 22, 20.5 and 5 GPa, respectively. In addition, the modulus of the unit-type support layer should not be more than 20 GPa, to ensure the step in support layer remains less than 1 mm.
文摘The composite separator comprising of polysulfone and zirconia was prepared by phase inversion precipitation technique. The influence of manufacturing parameters on its properties was investigated, and the results show that the manufacturing parameters affect the ionic resistance and maximum pore size significantly. A modified composite separator with a support layer was prepared to enhance the tensile strength of separator. By adding support layer, the tensile strength of the separator increases from 1.85MPa to 13.66MPa. In order to evaluate the practical applicability of the composite separator, a small-scale industrial electrolytic experiment was conducted to investigate the changes of cell voltage, gas purity and separator stability. The results show that the modified composite separator has a smaller cell voltage and a higher H2 purity than the asbestos separator, and are promising material for industrial hydrogen production.
基金the National Natural Science Foundation of China(22008231 and 21776267)grants of Dalian National Laboratory for Clean Energy(DNL)(DNL180203)+1 种基金the LiaoNing Revitalization Talents Program(XLYC1801004)the Youth Innovation Promotion Association of the Chinese Academy of Sciences(Y201829).
文摘Hydrogen separation through oxygen transport membranes(OTMs)has attracted much attention.Asymmetric membranes with thin dense layers provide low bulk diffusion resistances and high overall hydrogen separation performances.However,the resistance in the porous support layer(PSL)limits the overall separation performance significantly.Engineering the structure of the PSL is an appropriate way to enable fast gas transport and increase the separation performance.There is no relevant research on studying the influence of the PSL on hydrogen separation performance so far.Herein,we prepared Ce0.85Sm0.15O1.925–Sm0.6Sr0.4Cr0.3Fe0.7O3-δ(SDC-SSCF)asymmetric membranes with straight grooves in PSL by tape-casting and laser grooving.A~30%improvement in the hydrogen separation rate was achieved by grooving in the PSLs.It indicates that the grooves may reduce the concentration polarization resistance in PSL for the hydrogen separation process.This work provides a straight evidence on optimizing the structures of PSL for improving the hydrogen separation performance of the membrane reactors.
基金supported by The Basic Research Foundation of China (No.HAISANKE,2008010)The National Natural Science Foundation of China (No.40706043)+2 种基金The Natural Science Foundation of Fujian Province (No.2006J0184)The Open Research of Key laboratory of Coastal Ecosystem and Environment (No.200610)The Youth Foundation of SOA of China (No.2007606).
文摘This paper reports a new route for the preparation of layered alpha-zirconium phosphate （α-ZrP）-supported metalloporphyrin MnTMPyP. MnTMPyP was intercalated into α-ZrP using α-ZrP.BA （i.e. pre-intercalated bultylamine was arranged by a monolayer mode in α-ZrP） as a starting material. The catalytic activity of the supported material for homovanillic acid （HVA） oxidation was investigated. The results showed a promising layered material-supported catalyst in catalytic system.
文摘Metal–organic-framework(MOF)has been an increasingly hot organic-inorganic hybrid compounds. Here we develop an innovative concept by engineering a supporting layer made of MOF derived carbon materials. The supporting thin layer is prepared by carbonizing zeolitic-imidazole framework(ZIF-67). CdSe quantum dot sensitized TiO_2 nanocrystalline thin film deposited by the method of chemical bath deposition(CBD). The MOF unique microstructure in the support layer builds the electronic highway, which greatly improves the efficiency of the CdSe quantum dot-sensitized solar cells(QDSSCs), and the power conversion efficiency(PCE)of the device was significantly improved from 2.98% to 5.79% via ZIF-67 derived carbon supporting thin layer.
文摘This paper focuses on some application issues in m.multi-layered perceptrons researches. The following problem areas are discussed: (1) the classification capability of multi-layered perceptrons; (2) theself-configuration algorithm for facilitating the design of the neural nets' structure;and,finally (3) the application of the fast BP algorithm to speed up the learning procedure. Some experimental results with respect to the application of multi-layered perceptrons as classifier systems in the comprehensive evaluation of Chinese large cities are presented.
基金国家自然科学基金(22072172,22202227)国家杰出青年科学基金(21825204)+2 种基金中国科学院青年创新促进会(Y2021056)榆林学院与大连清洁能源国家实验室合作基金(YLU-DNL Fund 2022007)山西省科技创新团队专项资金(202304051001007)资助。
