Nowadays,air pollution is a big environmental problem in develop-ing countries.In this problem,particulate matter 2.5(PM2.5)in the air is an air pollutant.When its concentration in the air is high in developing countr...Nowadays,air pollution is a big environmental problem in develop-ing countries.In this problem,particulate matter 2.5(PM2.5)in the air is an air pollutant.When its concentration in the air is high in developing countries like Vietnam,it will harm everyone’s health.Accurate prediction of PM2.5 concentrations can help to make the correct decision in protecting the health of the citizen.This study develops a hybrid deep learning approach named PM25-CBL model for PM2.5 concentration prediction in Ho Chi Minh City,Vietnam.Firstly,this study analyzes the effects of variables on PM2.5 concentrations in Air Quality HCMC dataset.Only variables that affect the results will be selected for PM2.5 concentration prediction.Secondly,an efficient PM25-CBL model that integrates a convolutional neural network(CNN)andBidirectionalLongShort-TermMemory(Bi-LSTM)isdeveloped.This model consists of three following modules:CNN,Bi-LSTM,and Fully connected modules.Finally,this study conducts the experiment to compare the performance of our approach and several state-of-the-art deep learning models for time series prediction such as LSTM,Bi-LSTM,the combination of CNN and LSTM(CNN-LSTM),and ARIMA.The empirical results confirm that PM25-CBL model outperforms other methods for Air Quality HCMC dataset in terms of several metrics including Mean Squared Error(MSE),Root Mean Squared Error(RMSE),Mean Absolute Error(MAE),and Mean Absolute Percentage Error(MAPE).展开更多
Community park is one of the most important landscape spaces for urban people to live outdoors,and people’s perception of environmental microclimate is a direct factor affecting the use frequency and experience of co...Community park is one of the most important landscape spaces for urban people to live outdoors,and people’s perception of environmental microclimate is a direct factor affecting the use frequency and experience of community parks.In this paper,Shijingshan Sculpture Park of Beijing was taken as experimental object.Using the method of fi eld measurement,9-d winter test for 3 months was conducted in three kinds of landscape architecture spaces,including waterfront plaza,open green space and square under the forest.Via regression analysis method,the measured air temperature(Ta),relative humidity of air(RH),particulate matter(PM2.5)were analyzed.It is found that winter sunshine is main infl uence factor of garden microclimate,and there is a negative correlation between local temperature and humidity;local temperature and humidity can regulate the local PM2.5 concentration,and temperature shows negative correlation with PM2.5 concentration,while humidity shows positive correlation with PM2.5 concentration.Meanwhile,via comparative analysis of temperature,humidity and PM2.5 concentration in different types of garden spaces,the infl uence of different space forms,planting forms and materials on thermal environment of underlying surface and PM2.5 concentration was summarized,and design strategy was optimized,to be as benefi cial reference of reconstruction design of community parks.展开更多
Atmospheric particulate matter(PM2.5) seriously influences air quality. It is considered one of the main environmental triggers for lung and heart diseases. Air pollutants can be adsorbed by forest. In this study we i...Atmospheric particulate matter(PM2.5) seriously influences air quality. It is considered one of the main environmental triggers for lung and heart diseases. Air pollutants can be adsorbed by forest. In this study we investigated the effect of forest cover on urban PM2.5 concentrations in 12 cities in Heilongjiang Province,China. The forest cover in each city was constant throughout the study period. The average daily concentration of PM2.5 in 12 cities was below 75 lg/m^3 during the non-heating period but exceeded this level during heating period. Furthermore, there were more moderate pollution days in six cities. This indicated that forests had the ability to reduce the concentration of PM2.5 but the main cause of air pollution was excessive human interference and artificial heating in winter. We classified the 12 cities according to the average PM2.5 concentrations. The relationship between PM2.5 concentrations and forest cover was obtained by integrating forest cover, land area,heated areas and number of vehicles in cities. Finally,considering the complexity of PM2.5 formation and based on the theory of random forestry, we selected six cities and analyzed their meteorological and air pollutant data. The main factors affecting PM2.5 concentrations were PM10,NO_2, CO and SO_2 in air pollutants while meteorological factors were secondary.展开更多
Particulate matter with an aerodynamic diameter no greater than 2.5 lm(PM2.5)concentration forecasting is desirable for air pollution early warning.This study proposes an improved hybrid model,named multi-feature clus...Particulate matter with an aerodynamic diameter no greater than 2.5 lm(PM2.5)concentration forecasting is desirable for air pollution early warning.This study proposes an improved hybrid model,named multi-feature clustering decomposition(MCD)–echo state network(ESN)–particle swarm optimization(PSO),for multi-step PM2.5 concentration forecasting.The proposed model includes decomposition and optimized forecasting components.In the decomposition component,an MCD method consisting of rough sets attribute reduction(RSAR),k-means clustering(KC),and the empirical wavelet transform(EWT)is proposed for feature selection and data classification.Within the MCD,the RSAR algorithm is adopted to select significant air pollutant variables,which are then clustered by the KC algorithm.The clustered results of the PM2.5 concentration series are decomposed into several sublayers by the EWT algorithm.In the optimized forecasting component,an ESN-based predictor is built for each decomposed sublayer to complete the multi-step forecasting computation.The PSO algorithm is utilized to optimize the initial parameters of the ESN-based predictor.Real PM2.5 concentration data from four cities located in different zones in China are utilized to verify the effectiveness of the proposed model.The experimental results indicate that the proposed forecasting model is suitable for the multi-step high-precision forecasting of PM2.5 concentrations and has better performance than the benchmark models.展开更多
The planetary boundary layer height(PBLH) was calculated using the radiosonde sounding data, including120 L-band operational sites and 8 GPS sites in China. The diurnal and seasonal variations of PBLH were analyzed us...The planetary boundary layer height(PBLH) was calculated using the radiosonde sounding data, including120 L-band operational sites and 8 GPS sites in China. The diurnal and seasonal variations of PBLH were analyzed using radiosonde sounding(OBS-PBLH) and ERA data(ERA-PBLH). Based on comparison and error analyses, we discussed the main error sources in these data. The frequency distributions of PBLH variations under different regimes(the convective boundary layer, the neutral residual layer, and the stable boundary layer) can be well fitted by a Gamma distribution and the shape parameter k and scale parameter s values were obtained for different regions of China. The variation characteristics of PBLH were found in summer under these three regimes for different regions. The relationships between PBLH and PM_(2.5) concentration generally follow a power law under very low or no precipitation conditions in the region of Beijing, Tianjin and Hebei in summer. The results usually deviated from this power distribution only under strong precipitation or high relative humidity conditions because of the effects of hygroscopic growth of aerosols or wet deposition. The OBS-PBLH provided a reasonable spatial distribution relative to ERA-PBLH.This indicates that OBS-PBLH has the potential for identifying the variation of PM_(2.5) concentration.展开更多
During aeolian processes,the two most critical factors related to dust emissions are soil particle and aggregate saltation,which greatly affect the vertical profiles of near-surface dust concentrations.In this study,w...During aeolian processes,the two most critical factors related to dust emissions are soil particle and aggregate saltation,which greatly affect the vertical profiles of near-surface dust concentrations.In this study,we measured PM10 concentrations at four different heights(0.10,0.50,1.00 and 2.00 m)with and without continuous and simultaneous aeolian saltation processes on a Gobi surface in northwestern China from 31 March to 10 April,2017.We found that the vertical concentration profiles of suspended PM10 matched the log-law model well when there was no aeolian saltation.For the erosion process with saltation,we divided the vertical concentration profiles of PM10 into the saltation-affected layer and the airflow-transport layer according to two different dust sources(i.e.,locally emitted PM10 and upwind transported PM10).The transition height between the saltation-affected layer and the airflow-transport layer was not fixed and varied with saltation intensity.From this new perspective,we calculated the airflow-transport layer and the dust emission rate at different times during a wind erosion event occurred on 5 April 2017.We found that dust emissions during wind erosion are primarily controlled by saltation intensity,contributing little to PM10 concentrations above the ground surface compared to PM10 concentrations transported from upwind directions.As erosion progresses,the surface supply of erodible grains is the most crucial factor for saltation intensity.When there was a sufficient amount of erodible grains,there was a significant correlation among the friction velocity,saltation intensity and dust emission rate.However,when supply is limited by factors such as surface renewal or an increase in soil moisture,the friction velocity will not necessarily correlate with the other two factors.Therefore,for the Gobi surface,compared to limiting dust emissions from upwind directions,restricting the transport of suspended dust in its path is by far a more efficient and realistic option for small areas that are often exposed to dust storms.This study provides some theoretical basis for correctly estimating PM10 concentrations in the Gobi areas.展开更多
Haze concentration prediction,especially PM2.5,has always been a significant focus of air quality research,which is necessary to start a deep study.Aimed at predicting the monthly average concentration of PM2.5 in Bei...Haze concentration prediction,especially PM2.5,has always been a significant focus of air quality research,which is necessary to start a deep study.Aimed at predicting the monthly average concentration of PM2.5 in Beijing,a novel method based on Monte Carlo model is conducted.In order to fully exploit the value of PM2.5 data,we take logarithmic processing of the original PM2.5 data and propose two different scales of the daily concentration and the daily chain development speed of PM2.5 respectively.The results show that these data are both approximately normal distribution.On the basis of the results,a Monte Carlo method can be applied to establish a probability model of normal distribution based on two different variables and random sampling numbers can also be generated by computer.Through a large number of simulation experiments,the average monthly concentration of PM2.5 in Beijing and the general trend of PM2.5 can be obtained.By comparing the errors between the real data and the predicted data,the Monte Carlo method is reliable in predicting the PM2.5 monthly mean concentration in the area.This study also provides a feasible method that may be applied in other studies to predict other pollutants with large scale time series data.展开更多
PM2.5 has a non-negligible impact on visibility and air quality as an important component of haze and can affect cloud formation and rainfall and thus change the climate,and it is an evaluation indicator of air pollut...PM2.5 has a non-negligible impact on visibility and air quality as an important component of haze and can affect cloud formation and rainfall and thus change the climate,and it is an evaluation indicator of air pollution level.Achieving PM2.5 concentration prediction based on relevant historical data mining can effectively improve air pollution forecasting ability and guide air pollution prevention and control.The past methods neglected the impact caused by PM2.5 flow between cities when analyzing the impact of inter-city PM2.5 concentrations,making it difficult to further improve the prediction accuracy.However,factors including geographical information such as altitude and distance and meteorological information such as wind speed and wind direction affect the flow of PM2.5 between cities,leading to the change of PM2.5 concentration in cities.So a PM2.5 directed flow graph is constructed in this paper.Geographic and meteorological data is introduced into the graph structure to simulate the spatial PM2.5 flow transmission relationship between cities.The introduction of meteorological factors like wind direction depicts the unequal flow relationship of PM2.5 between cities.Based on this,a PM2.5 concentration prediction method integrating spatial-temporal factors is proposed in this paper.A spatial feature extraction method based on weight aggregation graph attention network(WGAT)is proposed to extract the spatial correlation features of PM2.5 in the flow graph,and a multi-step PM2.5 prediction method based on attention gate control loop unit(AGRU)is proposed.The PM2.5 concentration prediction model WGAT-AGRU with fused spatiotemporal features is constructed by combining the two methods to achieve multi-step PM2.5 concentration prediction.Finally,accuracy and validity experiments are conducted on the KnowAir dataset,and the results show that the WGAT-AGRU model proposed in the paper has good performance in terms of prediction accuracy and validates the effectiveness of the model.展开更多
The Brussels Capital Region has difficulties in meeting the stringent EU daily limit value for PM10 in all its measuring sites. Postponing the attainment of the deadline was not granted by the EU Commission, mainly du...The Brussels Capital Region has difficulties in meeting the stringent EU daily limit value for PM10 in all its measuring sites. Postponing the attainment of the deadline was not granted by the EU Commission, mainly due to insufficient judged measures to reduce road traffic emissions. However, a thorough analysis of the data makes clear that neither the particle mass concentration (PM10 and PM2.5) nor the particle number concentration are specific metrics for evaluating the particle pollution originated by traffic. In fact, increased formation of secondary aerosol, together with adverse meteorological conditions and the (re) suspension of the coarser fraction are by far the three main explanations for the numerous PM10 exceeding values. From our experience, amongst the particles measured, only the results for Black Carbon (BC), mainly present in the lower submicron range, are reflective of the direct influence of local traffic. Measured at two traffic sites along with PM mass and number concentrations, the data for Black Carbon show a striking correlation with nitrogen monoxide, a parameter strongly related with the proximity of the local traffic. The correlation factor between Black Carbon data and NO or NOX is much higher than between Black Carbon and the PM mass or number concentration. Therefore the assessment of traffic related particles should consider Black Carbon rather than PM10 or PM2.5.展开更多
Indoor air quality has become an important matter for health and safety. Most manufacturing processes generate aerosols. In the metal cutting industry, dry machining processes are accompanied by dust emission (fogs, f...Indoor air quality has become an important matter for health and safety. Most manufacturing processes generate aerosols. In the metal cutting industry, dry machining processes are accompanied by dust emission (fogs, fine chips and metallic dust in both micrometers and nanometers scales) that has impacts on workers’ health. This research work aimed to understand and reduce the harmful impacts of the machining process on the occupational safety. In this study, an experimental investigation was carried out on fine and ultrafine metallic dust emission during slot milling of 2024-T351, 6061-T6 and 7075-T6 aluminum alloy in dry conditions. It was confirmed that the cutting conditions influence significantly the specific surface area of ultrafine particles. It was also found that the cutting speed is a determinant factor for specific surface area of ultrafine particles and control during the slot milling process.展开更多
文摘Nowadays,air pollution is a big environmental problem in develop-ing countries.In this problem,particulate matter 2.5(PM2.5)in the air is an air pollutant.When its concentration in the air is high in developing countries like Vietnam,it will harm everyone’s health.Accurate prediction of PM2.5 concentrations can help to make the correct decision in protecting the health of the citizen.This study develops a hybrid deep learning approach named PM25-CBL model for PM2.5 concentration prediction in Ho Chi Minh City,Vietnam.Firstly,this study analyzes the effects of variables on PM2.5 concentrations in Air Quality HCMC dataset.Only variables that affect the results will be selected for PM2.5 concentration prediction.Secondly,an efficient PM25-CBL model that integrates a convolutional neural network(CNN)andBidirectionalLongShort-TermMemory(Bi-LSTM)isdeveloped.This model consists of three following modules:CNN,Bi-LSTM,and Fully connected modules.Finally,this study conducts the experiment to compare the performance of our approach and several state-of-the-art deep learning models for time series prediction such as LSTM,Bi-LSTM,the combination of CNN and LSTM(CNN-LSTM),and ARIMA.The empirical results confirm that PM25-CBL model outperforms other methods for Air Quality HCMC dataset in terms of several metrics including Mean Squared Error(MSE),Root Mean Squared Error(RMSE),Mean Absolute Error(MAE),and Mean Absolute Percentage Error(MAPE).
基金National Natural Science Foundation of China(51708004)North University of Technology YuYou Talent Training Program(215051360020XN160/009)+1 种基金Beijing Natural Science Foundation(8202017)2018 Beijing Municipal University Academic Human Resources Development—Youth Talent Support Program(PXM2018_014212_000043).
文摘Community park is one of the most important landscape spaces for urban people to live outdoors,and people’s perception of environmental microclimate is a direct factor affecting the use frequency and experience of community parks.In this paper,Shijingshan Sculpture Park of Beijing was taken as experimental object.Using the method of fi eld measurement,9-d winter test for 3 months was conducted in three kinds of landscape architecture spaces,including waterfront plaza,open green space and square under the forest.Via regression analysis method,the measured air temperature(Ta),relative humidity of air(RH),particulate matter(PM2.5)were analyzed.It is found that winter sunshine is main infl uence factor of garden microclimate,and there is a negative correlation between local temperature and humidity;local temperature and humidity can regulate the local PM2.5 concentration,and temperature shows negative correlation with PM2.5 concentration,while humidity shows positive correlation with PM2.5 concentration.Meanwhile,via comparative analysis of temperature,humidity and PM2.5 concentration in different types of garden spaces,the infl uence of different space forms,planting forms and materials on thermal environment of underlying surface and PM2.5 concentration was summarized,and design strategy was optimized,to be as benefi cial reference of reconstruction design of community parks.
基金supported by the Natural Science Foundation of Heilongjiang Province,China(Grant No.G2016001)
文摘Atmospheric particulate matter(PM2.5) seriously influences air quality. It is considered one of the main environmental triggers for lung and heart diseases. Air pollutants can be adsorbed by forest. In this study we investigated the effect of forest cover on urban PM2.5 concentrations in 12 cities in Heilongjiang Province,China. The forest cover in each city was constant throughout the study period. The average daily concentration of PM2.5 in 12 cities was below 75 lg/m^3 during the non-heating period but exceeded this level during heating period. Furthermore, there were more moderate pollution days in six cities. This indicated that forests had the ability to reduce the concentration of PM2.5 but the main cause of air pollution was excessive human interference and artificial heating in winter. We classified the 12 cities according to the average PM2.5 concentrations. The relationship between PM2.5 concentrations and forest cover was obtained by integrating forest cover, land area,heated areas and number of vehicles in cities. Finally,considering the complexity of PM2.5 formation and based on the theory of random forestry, we selected six cities and analyzed their meteorological and air pollutant data. The main factors affecting PM2.5 concentrations were PM10,NO_2, CO and SO_2 in air pollutants while meteorological factors were secondary.
基金The study is fully supported by the National Natural Science Foundation of China(61873283)the Changsha Science&Technology Project(KQ1707017)the Innovation Driven Project of the Central South University(2019CX005).
文摘Particulate matter with an aerodynamic diameter no greater than 2.5 lm(PM2.5)concentration forecasting is desirable for air pollution early warning.This study proposes an improved hybrid model,named multi-feature clustering decomposition(MCD)–echo state network(ESN)–particle swarm optimization(PSO),for multi-step PM2.5 concentration forecasting.The proposed model includes decomposition and optimized forecasting components.In the decomposition component,an MCD method consisting of rough sets attribute reduction(RSAR),k-means clustering(KC),and the empirical wavelet transform(EWT)is proposed for feature selection and data classification.Within the MCD,the RSAR algorithm is adopted to select significant air pollutant variables,which are then clustered by the KC algorithm.The clustered results of the PM2.5 concentration series are decomposed into several sublayers by the EWT algorithm.In the optimized forecasting component,an ESN-based predictor is built for each decomposed sublayer to complete the multi-step forecasting computation.The PSO algorithm is utilized to optimize the initial parameters of the ESN-based predictor.Real PM2.5 concentration data from four cities located in different zones in China are utilized to verify the effectiveness of the proposed model.The experimental results indicate that the proposed forecasting model is suitable for the multi-step high-precision forecasting of PM2.5 concentrations and has better performance than the benchmark models.
基金National Key R&D Program Pilot Projects of China(2016YFC203300)Major Program of National Natural Science Foundation of China(91644223)+2 种基金Special Funding Project for Public Industry Research and Development of Ministry of Environmental Protection(201509001)National Natural Science Foundation of China(9133700041575008)
文摘The planetary boundary layer height(PBLH) was calculated using the radiosonde sounding data, including120 L-band operational sites and 8 GPS sites in China. The diurnal and seasonal variations of PBLH were analyzed using radiosonde sounding(OBS-PBLH) and ERA data(ERA-PBLH). Based on comparison and error analyses, we discussed the main error sources in these data. The frequency distributions of PBLH variations under different regimes(the convective boundary layer, the neutral residual layer, and the stable boundary layer) can be well fitted by a Gamma distribution and the shape parameter k and scale parameter s values were obtained for different regions of China. The variation characteristics of PBLH were found in summer under these three regimes for different regions. The relationships between PBLH and PM_(2.5) concentration generally follow a power law under very low or no precipitation conditions in the region of Beijing, Tianjin and Hebei in summer. The results usually deviated from this power distribution only under strong precipitation or high relative humidity conditions because of the effects of hygroscopic growth of aerosols or wet deposition. The OBS-PBLH provided a reasonable spatial distribution relative to ERA-PBLH.This indicates that OBS-PBLH has the potential for identifying the variation of PM_(2.5) concentration.
基金This work was supported by the National Natural Science Foundation of China(41630747).
文摘During aeolian processes,the two most critical factors related to dust emissions are soil particle and aggregate saltation,which greatly affect the vertical profiles of near-surface dust concentrations.In this study,we measured PM10 concentrations at four different heights(0.10,0.50,1.00 and 2.00 m)with and without continuous and simultaneous aeolian saltation processes on a Gobi surface in northwestern China from 31 March to 10 April,2017.We found that the vertical concentration profiles of suspended PM10 matched the log-law model well when there was no aeolian saltation.For the erosion process with saltation,we divided the vertical concentration profiles of PM10 into the saltation-affected layer and the airflow-transport layer according to two different dust sources(i.e.,locally emitted PM10 and upwind transported PM10).The transition height between the saltation-affected layer and the airflow-transport layer was not fixed and varied with saltation intensity.From this new perspective,we calculated the airflow-transport layer and the dust emission rate at different times during a wind erosion event occurred on 5 April 2017.We found that dust emissions during wind erosion are primarily controlled by saltation intensity,contributing little to PM10 concentrations above the ground surface compared to PM10 concentrations transported from upwind directions.As erosion progresses,the surface supply of erodible grains is the most crucial factor for saltation intensity.When there was a sufficient amount of erodible grains,there was a significant correlation among the friction velocity,saltation intensity and dust emission rate.However,when supply is limited by factors such as surface renewal or an increase in soil moisture,the friction velocity will not necessarily correlate with the other two factors.Therefore,for the Gobi surface,compared to limiting dust emissions from upwind directions,restricting the transport of suspended dust in its path is by far a more efficient and realistic option for small areas that are often exposed to dust storms.This study provides some theoretical basis for correctly estimating PM10 concentrations in the Gobi areas.
文摘Haze concentration prediction,especially PM2.5,has always been a significant focus of air quality research,which is necessary to start a deep study.Aimed at predicting the monthly average concentration of PM2.5 in Beijing,a novel method based on Monte Carlo model is conducted.In order to fully exploit the value of PM2.5 data,we take logarithmic processing of the original PM2.5 data and propose two different scales of the daily concentration and the daily chain development speed of PM2.5 respectively.The results show that these data are both approximately normal distribution.On the basis of the results,a Monte Carlo method can be applied to establish a probability model of normal distribution based on two different variables and random sampling numbers can also be generated by computer.Through a large number of simulation experiments,the average monthly concentration of PM2.5 in Beijing and the general trend of PM2.5 can be obtained.By comparing the errors between the real data and the predicted data,the Monte Carlo method is reliable in predicting the PM2.5 monthly mean concentration in the area.This study also provides a feasible method that may be applied in other studies to predict other pollutants with large scale time series data.
基金supported by Central South University Research Programme of Advanced Interdisciplinary Studies(2023QYJC041).
文摘PM2.5 has a non-negligible impact on visibility and air quality as an important component of haze and can affect cloud formation and rainfall and thus change the climate,and it is an evaluation indicator of air pollution level.Achieving PM2.5 concentration prediction based on relevant historical data mining can effectively improve air pollution forecasting ability and guide air pollution prevention and control.The past methods neglected the impact caused by PM2.5 flow between cities when analyzing the impact of inter-city PM2.5 concentrations,making it difficult to further improve the prediction accuracy.However,factors including geographical information such as altitude and distance and meteorological information such as wind speed and wind direction affect the flow of PM2.5 between cities,leading to the change of PM2.5 concentration in cities.So a PM2.5 directed flow graph is constructed in this paper.Geographic and meteorological data is introduced into the graph structure to simulate the spatial PM2.5 flow transmission relationship between cities.The introduction of meteorological factors like wind direction depicts the unequal flow relationship of PM2.5 between cities.Based on this,a PM2.5 concentration prediction method integrating spatial-temporal factors is proposed in this paper.A spatial feature extraction method based on weight aggregation graph attention network(WGAT)is proposed to extract the spatial correlation features of PM2.5 in the flow graph,and a multi-step PM2.5 prediction method based on attention gate control loop unit(AGRU)is proposed.The PM2.5 concentration prediction model WGAT-AGRU with fused spatiotemporal features is constructed by combining the two methods to achieve multi-step PM2.5 concentration prediction.Finally,accuracy and validity experiments are conducted on the KnowAir dataset,and the results show that the WGAT-AGRU model proposed in the paper has good performance in terms of prediction accuracy and validates the effectiveness of the model.
文摘The Brussels Capital Region has difficulties in meeting the stringent EU daily limit value for PM10 in all its measuring sites. Postponing the attainment of the deadline was not granted by the EU Commission, mainly due to insufficient judged measures to reduce road traffic emissions. However, a thorough analysis of the data makes clear that neither the particle mass concentration (PM10 and PM2.5) nor the particle number concentration are specific metrics for evaluating the particle pollution originated by traffic. In fact, increased formation of secondary aerosol, together with adverse meteorological conditions and the (re) suspension of the coarser fraction are by far the three main explanations for the numerous PM10 exceeding values. From our experience, amongst the particles measured, only the results for Black Carbon (BC), mainly present in the lower submicron range, are reflective of the direct influence of local traffic. Measured at two traffic sites along with PM mass and number concentrations, the data for Black Carbon show a striking correlation with nitrogen monoxide, a parameter strongly related with the proximity of the local traffic. The correlation factor between Black Carbon data and NO or NOX is much higher than between Black Carbon and the PM mass or number concentration. Therefore the assessment of traffic related particles should consider Black Carbon rather than PM10 or PM2.5.
文摘Indoor air quality has become an important matter for health and safety. Most manufacturing processes generate aerosols. In the metal cutting industry, dry machining processes are accompanied by dust emission (fogs, fine chips and metallic dust in both micrometers and nanometers scales) that has impacts on workers’ health. This research work aimed to understand and reduce the harmful impacts of the machining process on the occupational safety. In this study, an experimental investigation was carried out on fine and ultrafine metallic dust emission during slot milling of 2024-T351, 6061-T6 and 7075-T6 aluminum alloy in dry conditions. It was confirmed that the cutting conditions influence significantly the specific surface area of ultrafine particles. It was also found that the cutting speed is a determinant factor for specific surface area of ultrafine particles and control during the slot milling process.
