Anti-Corrosion and Reconstruction of Surface Crystal Plane for Zn Anodes by an Advanced Metal Passivation Technique

For the aqueous Zn-ion battery,dendrite formation,corrosion,and interfacial parasitic reactions are major issues,which greatly inhibits their practical application.How to develop a method of Zn construction or treatment to solve these issues for Zn anodes are still great challenges.Herein,a simple and cheap metal passivation technique is proposed for Zn anodes from a corrosion science perspective.Similar to the metal anticorrosion engineering,the formed interfacial protective layer in a chemical way can sufficiently solve the corrosion issues.Furthermore,the proposed passivity approach can reconstruct Zn surface-preferred crystal planes,exposing more(002)planes and improving surface hydrophilicity,which inhibits the formation of Zn dendrites and hydrogen evolution effectively.As expected,the passivated Zn achieves outstanding cycling life(1914 h)with low voltage polarization(<40 mV).Even at 6 mA cm^(−2) and 3 mA h cm^(−2),it can achieve stable Zn deposition over 460 h.The treated Zn anode coupled with MnO_(2) cathode shows prominently reinforced full batteries service life,making it a potential Zn anode candidate for excellent performance aqueous Zn-ion batteries.The proposed passivation approach provides a guideline for other metal electrodes preparation in various batteries and establishes the connections between corrosion science and batteries.

Structural Surface Crack Monitoring Method Based on Electrical Potential Technique and Modern Surface Technology

Crack monitoring plays a great role in modern structural health monitoring, however, most of the conventional crack inspections have disadvantages in terms of the accuracy, expense, reliability, durability and level of instrumentation required. Thus, development of a simple and reliable crack inspection technique that allows continuous monitoring has been desired. In this paper, electrical potential technique and modern surface technology are employed together to develop a new structural surface crack monitoring method. A special crack monitoring coating sensor based on electrical potential technique was deposited on the hot spot of the structure by modern surface technology. The sensor consists of three layers： the isolated layer, the sensing layer and the protective layer. The isolated layer is prepared by anodic oxidation technology, the sensing layer is made of ion plated copper, and the protective layer is made of silicone. The thickness of each layer is at micrometer magnitude. The electrical conductivity of the sensor is very stable, and the fatigue performance of the specimen with or without coating sensor is nearly unchanged. The crack monitoring experiment result shows that there are two sudden rises of the coating sensor electrical potential values, corresponding to different stages of the crack initiation and propagation. Since the width of the surface coating sensor is only 0.5 mm, this crack monitoring sensor can detect the propagation of cracks less than 0.5 mm long. The method proposed takes the simplicity of electrical potential technique and can monitor surface crack of nearly all kinds of structures precisely. The results of this paper may form the basis of a new crack monitoring system.

Technologies for Asphalt Pavement Surface Testing in Road and Bridge Construction

Asphalt pavement is currently one of the main components in the construction of roads and bridges.However,from a practical point of view,various quality problems are prone to occur in the surface layer of asphalt pavement,which will lead to the poor overall quality of road and bridge projects.Therefore,it should be applied reasonably.Advanced testing technologies are used to test the mixture quality,compaction,segregation,thickness,and other aspects of the asphalt pavement surface layer,so as to improve the quality of the asphalt pavement surface layer,and then improve the overall quality of road and bridge construction.Therefore,this paper mainly analyzes the technologies for asphalt pavement surface layer testing in road and bridge engineering construction.

The Fabrication of Microstructure Surface of Superhydrophobic Coating by Surface Gelation Technology

The microstructured surface of materials were fabricated by a two-step acid-base catalyzed sol-gel process. In fluorinated polymer with PTFE doping, the well-proportioned composite sols were prepared using sol-gel processing under the hydrochloric acid and deficiency of water conditions. After the substrate was coated by composite sols, and the gelation treatment on the surface of composite coating, the micrometer-scale and nanometer-scale hierarchical structures were formed in surface layer of material. XPS and TEM technologies were employed to identify that the gelation occurs just on the surface of composite coating. The morphology of coating surface was observed by SEM and AFM technologies. The microstructured surface of material can be fabricated using this inexpensive and easily controlled method on low surface energy resin materials, the super-hydrophobic coatings materials can be prepared.

CALCULATION OF THREE－DIMENSIONAL SOLDER JOINT FORMATION IN MICROELECTRONIC SURFACE MOUNT TECHNOLOGY

A finite element analysis for calculating three-dimensional(3-D) solder joint shape between chip component and substrate pad was carried out, and the effects of solder volume and pad extension beyond the edge of component on solder joint shapes were investigated. The resonable design ranges of solder volume and pad extension have been put forward.

Investigation of the processing technology and mechanism of Kansui radix by licorice based on response surface methodology and integrative pharmacology

Background:The herbs should be processed by different methods before use,and the efficacy and toxicity of Chinese herbal medicines may change,which may enhance efficacy and reduce toxicity after processing.Gansui(Kansui radix)is a common clinical herbal medicine,and there are considerable changes in its toxicity and efficacy after processing.Gaocao(Glycyrrhizae radix et rhizome)has a detoxifying effect.Methods:Using the contents of euphorbiadienol and the alcohol-soluble extract of Glycyrrhizae radix-processed Kansui radix as evaluation indexes,response surface methodology was used to optimize the processing technology of Kansui radix by exploring the effects of Glycyrrhizae radix et rhizoma-addition amount,frying temperature,and frying time on the processing technology of Kansui radix.Meanwhile,response surface software was used to analyze experimental data to determine the processing parameters of Kansui radix by Glycyrrhizae radix et rhizoma.Integrative Pharmacology-based Research Platform of Traditional Chinese Medicine is used to analysis the potential ingredients of Kansui radix and verify the potential ingredients by western blotting.Results:The technology of Glycyrrhizae radix et rhizoma-processed Kansui radix was optimized for the Glycyrrhizae radix et rhizoma-addition amount of 27%,frying temperature of 180℃,and frying time of 11 min.The network pharmacology analysis revealed that Kansui radix could cause kidney,liver,and heart injury by the PI3K/AKT signaling pathway.Kansui radix at high or low dose could decrease the ratio of p-AKT/AKT while Glycyrrhizae radix et rhizoma-processed Kansui could increase it.Conclusion:The model established by response surface methodology is relatively accurate and can predict the contents of euphorbiadienol and alcohol extract of processed Kansui radix.The toxic effects and its mechanism of action of Kansui radix and processed Kansui radix on kidney,liver,and heart,from the perspective of systems biology,have provided scientific evidence to its clinical application.

Reliability Theory Study of Combined Mining Technology System in Surface Mines

The connection between all the single systems iu combined technology is analysed, and the mine engineering reliability is calculated in any area of the mines using combined technololgy system. The reliability design and distribution method in this system is put forward, thus the basis is set for the decision to raise the total production capability or the surface mines in which the combined system is used.

A Study of Multi-Permeating TiN/Ti Alloying Layer Using Plasma Surface Alloying Technology

TiN/Ti multi-permeating alloying layer has been formed on the low carbon steel by means of the double glow-discharge plasma surface alloying technique and hollow-cathode effect. The alloying layer was detected by axiovert 25 CA optical microscope with computer analyzing software （LEC）, GDA-2 glow discharge spectroscopy （GDS）, X-ray diffraction （XRD） and galvanochemical method. The results showed that the thickness of TiN/Ti multi-permeating alloying layer was about 10μm, the content of Ti on the surface was up to 63.48 wt% and the content of N was up to 12.46 wt%. The atom Ti and N concentrations changed gradually across the depth of the alloying layer and the preferred orientation of TiN/Ti alloying layer was crystal surface （200）. The multi-permeating alloying layer and substrate were combined through metallurgy. The surface appearances of the multi-permeating alloying layer were uniform and of a compact cellular structure. The hardness of the surface was about 1600-3000 HV0.1. The corrosion resistance of the permeating TiN/Ti alloying layer in 0.5 mol/L H2SO4 solution was greatly increased and the corrosion rate was only 0.3082 g/m^2. h.

Research on development of surface-roughness variation and control technology of the automotive plates and rolls

Surface roughness considerably influences the stamping and coating performance of the automotive plates;however,the surface roughness of the automotive plates is transferred from the roll during the rolling process.Therefore,the variation and control technology regarding the roughness of the automotive plates and rolls has drawn increasing attention from researchers in China and around the globe.In this study,the research methods,analytical techniques,prediction models,transfer rules,and control technologies regarding the surface roughness of the automotive plates and rolls were reviewed.Among these,an online measurement system for automotive-plate and roll surface roughness has been applied to the production lines of Germany,China,Belgium,Holland,Austria,and other countries and has achieved remarkable results.Online measurement and timely feedback regarding the automotive-plate and roll surface roughness are needed to ensure favorable conditions for the establishment of automotive-plate roughness-control measurement.

Optimization of Enzyme-assisted Extraction Technology for Tartary Buckwheat Shell Procyanidins with Response Surface Methodology

This study was conducted to investigate the effects of cellulase dosage, enzymolysis time, pH and enzymolysis temperature on procyanidin extraction rate by single factor experiment, with tartary buckwheat shell as an experimental material.Main process parameters were optimized to obtain a regression model by response surface methodology. The results of variance analysis indicated that the regression model reflected the relationship between buckwheat shell procyanidin extraction rate with enzyme dosage, enzymolysis time, pH and enzymolysis temperature; and the optimal process parameters were enzyme dosage of 6.5 mg/g, enzymolysis time of 1.5 h, pH at 4.7 and enzymolysis temperature at 46 ℃. Three parallel experiments were conducted under these process parameters. In practice, the highest procyanidin extraction rate was 6.78 g/100 g. The relative error between the predicted value of regression model and the actual value was 1.3%. The regression equation fitted the real situation better.

Using Isotope Technology for Surface Water Environment Research in Southern Hanoi

The surface water in the southern of Hanoi capital is researched by identifying δ2H and δ18O stable isotopes together with EC, DO, BOD5, COD, TSS. Surface water samples for studying include the Red river, Nhue river and Kim Nguu river, Thanh Nhan lake, Yen So lake and Van Quan lake were collected in the dry season (April) and the rainy season (August) in 2015. The stable isotope analysis results showed that the δ18O values is a range from -42.53‰ to -64.05‰ and, the δ2H values is the range from -5.09‰ to -8.79‰ under global meteoric waterline (in the water vapor region). The δ2H results of the rivers and lakes in the dry season are more negative than the rainy season with a small difference. The δ18O results of lakes in the dry season are more negative than the rainy season, but the δ18O results of river in the dry season are more positive than the rainy season. The results of the EC, BOD, COD, DO, TSS analysis showed that surface water environment has changed clearly in the two seasons and the contamination level in the dry season is usually higher than the rainy season. The lakes and rivers strongly influenced by human activities led to seriously pollution are Van Quan lake and Yen So lake, Nhue river and Kim Nguu river.

Application of High-Resolution Remote Sensing Technology in Quantitative Study on Coseismic Surface Rupture Zones: An Example of the 2008 M_w7.2 Yutian Earthquake

Objective Nowadays, high-resolution remote sensing technology has brought new changes to surveys of earthquakes, and the quantitative study of seismic faults based on this technology has become a trend in the world(Barzegari et al., 2017). An Mw 7.2 earthquake occurred in Yutian of Xinjiang on the western end of the Altyn Tagh fault on March 21 st, 2008. It is difficult to access this depopulated zone because of the high altitude and only 1–2 months of snowmelt. This study utilized high-resolution

Surface Technology Systems在台湾成立区域新分公司

2006年2月8日，制造和封装MEMS（微机电系统）与先进电子器件所需的等离子制程技术巨擘surface Technology Systemsplc（STS）宣布，在台湾新竹成立新的销售与支持分公司，加强其在亚洲的业务。

Information Construction Technology of Free-Form Surface Steel Grid

Taking the construction project of National Network Security Talents and Innovation Base Exhibition Center as an example,the application of building information model in the construction process of free-form surface steel structure is analyzed in this paper.The results show that the application of Building Information Modeling(BIM)technology to the construction of free-form surface structure improves the work efficiency of the construction team in multi-disciplinary collaboration,surface component manufacturing,and construction process design,and subsequently improves the construction speed and construction quality.

Surface Technology Systems（STS）——新一代Pegasus晶圆深层蚀刻机赢得Bosch订单

等离子工艺技术巨擘Surface Technology Systems plc（STS）（LSE：SRTS）宣布，该公司新一代Pegasus晶圆深层蚀刻机（DRIE）已争取到德国自动化MEMS设备制造大厂博世（Robert Bosch GmbH）之订单。这张来自Bosch的订单．更加强了双方长久以来的合作关系，也是Pegasus自从2005年6月28日公开问世以来，所接获的第5张重要订单。

A Protocol to Develop Phenolic Emulsifiers Used in Micro-surface by Control Technology

The phenolic emulsifiers used in emulsified asphalt of micro-surfacing, which was the most important tools in the road maintenance, were investigated by control technology. Many factors influencing this reaction were studied and three kinds of phenolic emulsifiers were prepared without catalyst in ethanol. The performance was researched that 2-（{2-[2-（2-Amino-ethylamino）-ethylamino]-ethyl-amino}-methyl）-4- nonyl-phenol （abbreviated as TETA） could be used in micro-surface. With addition of 0.5 % demulsifier, the mixing time was extended to 120 seconds obviously, and the cohesion torque （60 min） was 2.8 N＊m, which satisfied the opening traffic time shorter than 1 h. The wet track abrasion （6 d） was lower than 807 g/m2, with interracial modifier added, but the load wheel was increased with interfacial modifier increasing. When the TETA： demulsifier： interracial modifier =3：1：3, excellent performance was obtained and the experimental results met the International Slurry Surfacing Association （ISSA） standard. The synthesis process of this emulsifier is simple and the performance used in micro-surface was excellent, so this kind of emulsifier could have a better application future.

Surface Technology Systems赢得超过两百万英镑的MEMS生产设备订单

英国韦尔斯新港（Newport）近日讯：将电浆制程科技运用在先进电子设备之制造和封装的巨擘Surface Technology Systemsplc（STS）（伦敦证交所代号：SRTS）公司，日前宣布已获得来自微机电系统（MEMS）生产设备制造业者价值超过两百万英镑的订单。

The Construction Technology of Freeform Surface Spatial Bending-Torsion Steel Structure

Taking the construction project of the National Cybersecurity Talents and Innovation Base as an example,this paper studies the construction technology of freeform surface spatial bending-torsion steel structure based on structural design model transformation,including the parametric modeling of deepening design model,computer-aided bending and torsion frame production,flexible docking in the bending-torsion combination unit,and welding stress deformation,in hope to provide reference for similar projects in the future.

Applying Surface Fitting in the Medical Thermal Tomography Technology

Based on the thermal tomography technology, this thesis tries to calculate quantity and distribution of heat source in vivo from body surface temperature. A superposition temperature image of a number of point heat sources is surface fitted to get the Q of heat sources (information of cancer cells) quantitatively. The result can reflect the disease area information because cancer cell's Q value is much higher than that of normal cell. This application is a new try in the diagnosis of breast cancer, which has an important value on the early detection and diagnosis of disease source.

Recent progress in microbial cell surface display systems and their application on biosensors

Microbial cell surface display technology is a recombinant technology to express target proteins on the cell membrane,which can be used to redesign the cell surface with functional proteins and peptides.Bacterial and yeast surface display systems are the most common cell surface display systems of prokaryotic and eukaryotic proteins,that are widely applied as the core elements in the field of biosensors due to their advantages,including enhanced stability,high yield,good safety,expression of larger and more complex proteins.To further promote the performance of biosensors,the biomineralized microbial surface display technology was proposed.This review summarized the different microbial surface display systems and the biomineralized surface display systems,where the mechanisms of surface display and biomineralization were introduced.Then we described the recent progress of their applications on biosensors for different types of detection targets.Finally,the outlooks and tendencies were discussed and forecasted with the expectation to provide some general functions and enlightenments to this aspect of research.