An Analytical Model for the Surface Electrical Field Distribution and Optimization of Bulk-Silicon Double RESURF Devices

A new 2D analytical model for the surface electrical field distribution and optimization of bulk-silicon double RESURF devices is presented. Based on the solution to the 2D Poisson＇s equation, the model gives the influence on the surface electrical field of the drain bias and structure parameters such as the doping concentration,the depth and the position of the p-top region, the thickness and the doping concentration of the drift region, and the substrate doping concentration. The dependence of breakdown voltage on the length and doping concentration of the drift region is also calculated. Further more,an effective way to gain the optimum high-voltage is also proposed. All analytical results are verified by simulation results obtained by MEDICI and previous experimental data,showing the validity of the model presented here.

A Novel Analytical Model for Surface Electrical Field Distribution and Optimization of TFSOI RESURF Devices

A novel analytical model for the thin film silicon on insulator (TFSOI) reduced surface field (RESURF) devices has been proposed.Based on the 2-D Poisson equation solution,the analytical expressions for the surface potential and field distributions are derived.From this analysis,the optimum design condition for the maximum breakdown voltage is obtained.The dependence of the maximum breakdown voltage on the drift region length is examined and the relationship between the critical doping concentration and the front- and back- interface oxide layer thickness is discussed.The numerical simulation performed by the advanced semiconductor simulation tool,DESSIS-ISE,has been shown to support the analytical results.

An analytical model for the surface electrical field distribution of LDMOSFETs with shield rings

An analytical model of an LDMOSFET with a shield ring is established according to the 2D Poisson equation. Surface electrical field distribution along the drift region is obtained from this model and the influence of shield length and oxide thickness on the electrical field distribution is studied. The robustness of this model is verified using ISE TCAD simulation tools. The breakdown voltage of a specific device is also calculated and the result is in good agreement with experimental data.

An AlGaN/GaN HEMT with a reduced surface electric field and an improved breakdown voltage

A reduced surface electric field in an AlGaN/GaN high electron mobility transistor （HEMT） is investigated by employing a localized Mg-doped layer under the two-dimensional electron gas （2-DEG） channel as an electric field shaping layer. The electric field strength around the gate edge is effectively relieved and the surface electric field is distributed evenly as compared with those of HEMTs with conventional source-connected field plate and double field plate structures with the same device physical dimensions. Compared with the HEMTs with conventional sourceconnected field plates and double field plates, the HEMT with a Mg-doped layer also shows that the breakdown location shifts from the surface of the gate edge to the bulk Mg-doped layer edge. By optimizing both the length of Mg-doped layer, Lm, and the doping concentration, a 5.5 times and 3 times the reduction in the peak electric field near the drain side gate edge is observed as compared with those of the HEMTs with source-connected field plate structure and double field plate structure, respectively. In a device with VGS = -5 V, Lm 1.5 m, a peak Mg doping concentration of 8×10^17 cm-3 and a drift region length of 10 m, the breakdown voltage is observed to increase from 560 V in a conventional device without field plate structure to over 900 V without any area overhead penalty.

Off-Shore Sea Surface Electric Field Investigations around the Indian Sub-Continent during 9-20 May 1983

Sea surface electric field observations off the coast from Goa (15°25'N, 73°47'E) to Madras (13°04'N, 80°15'E) around Sri Lanka, in a distance range 25-135 km from coast, during 9-20 May 1983 were taken. In this paper we have examined the diurnal variation of electric field in the Arabian Sea, Indian Ocean and Bay of Bengal regions covered during the cruise of the research ship ORV Gaveshani. An aspect of electric field dependence on coastal distance and Aitken Nuclei concentration has also been studied. An attempt to examine the latitude dependence of field was also made. Results obtained in the above studies are presented and compared with those obtained elsewhere.

The Bipolar Field-Effect Transistor:II.Drift-Diffusion Current Theory(Two-MOS-Gates on Pure-Base)

This paper describes the drift-diffusion theory of the bipolar field-effect transistor （BiFET） with two identical and connected metal-oxide-silicon-gates （MOS-gates） on a thin-pure-base. Analytical solution is obtained by partitioning the two-dimensional transistor into two one-dimensional problems coupled by the parametric sur- face-electric-potential. Total and component output and transfer currents and conductances versus D. C. voltages from the drift-diffusion theory, and their deviations from the electrochemical （quasi-Fermi） potential-gradient theory,are presented over practical ranges of thicknesses of the silicon base and gate oxide. A substantial contri- bution from the longitudinal gradient of the square of the transverse electric field is shown.

Facile Approach to Conductive Diamond Submicro-rods Arrays and Their Field Emission Properties

The authors presented a facile approach to prepare highly-ordered sub-micrometer scaled cylindrical diamond arrays based on a chemical vapor deposition method,where the accurate control of the style of crystal seeds dispersion and the growth time are very crucial.The as-prepared diamond array showed good conductivity which was originated from the proper boron doping,and moreover,it exhibited good field emission property with low turn-on field and high emission current.Importantly,this approach can be easily applied to the preparation of various micro-patterned one-dimensional diamond arrays.

Analytical models of lateral power devices with arbitrary vertical doping profiles in the drift region

By solving the 2D Poisson＇s equation, analytical models are proposed to calculate the surface potential and electric field distributions of lateral power devices with arbitrary vertical doping profiles. The vertical and the lateral breakdown voltages are formulized to quantify the breakdown characteristic in completely-depleted and partially-depleted cases. A new reduced surface field （RESURF） criterion which can be used in various drift doping profiles is further derived for obtaining the optimal trade-off between the breakdown voltage and the on-resistance. Based on these models and the numerical simulation, the electric field modulation mechanism and the breakdown characteristics of lateral power devices are investigated in detail for the uniform, linear, Gaussian, and some discrete doping profiles along the vertical direction in the drift region. Then, the mentioned vertical doping profiles of these devices with the same geometric parameters are optimized, and the results show that the optimal breakdown voltages and the effective drift doping concentrations of these devices are identical, which are equal to those of the uniform-doped device, respectively. The analytical results of these proposed models are in good agreement with the numerical results and the previous experimental results, confirming the validity of the models presented here.

Insulation Design Rule for a Spacer in SF_(6)/N_(2)-filled DC Gas Insulated Apparatus

A recurring challenge of a DC SF_(6)/N_(2)-filled GIS/GIL apparatus is the charge accumulation at DC stress.The conventional design rules and knowledge of AC spacers may not be applicable for this new type of apparatus.A novel design rule is proposed considering the effect of accumulated charge on the threshold of electric field strength being resistant to the superposed voltage.A surface charge accumulation simulation model is introduced,and the key parameters in the simulation model are measured.In addition,an experimental platform for a 100 kV spacer flashover test is established.Spacer flashover tests under superimposed voltage with opposing polarities are carried out,and the withstanding voltage of the spacer is obtained.Finally,based on the proposed model,the threshold of the surface electric field strength(tangential component)on the DC spacer in SF_(6)/N_(2) mixed gases is discussed.For a reliable insulation design of a DC GIS/GIL apparatus filled with 0.7 MPa SF_(6)/N_(2),the threshold of surface electric field strength on the DC spacer is 12 kV/mm.The insulation design rule can be referenced in the design of a high-voltage DC SF_(6)/N_(2)-filled GIS/GIL apparatus.

A homogenous solid polymer electrolyte prepared by facile spray drying method is used for room-temperature solid lithium metal batteries

The aggregation of inorganic particles with high mass ratio will form a heterogeneous electric field in the solid polymer electrolytes(SPEs),which is difficult to be compatible with lithium anode,leading to inadequate ionic conductivity.Herein,a facile spray drying method is adopted to increase the mass ratio of inorganic particles and solve the aggregation problems of fillers simultaneously.The polyvinylidene fluoride(PVDF)with lithium bis(trifluoromethanesulfonyl)imide(LiTFSI)covers the surface of each Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)(LLZTO)granules during the nebulization process,then forming flat solid electrolytes via layer-by-layer deposition.Characterized by the atomic force microscope,the obtained solid electrolytes achieve a homogenous dispersion of Young’s modulus and surface electric field.As a result,the as-prepared SPEs present high tensile strength of 7.1 MPa,high ionic conductivity of 1.86×10^(−4)S·cm^(−1)at room temperature,and wide electrochemical window up to 5.0 V,demonstrating increased mechanical strength and uniform lithium-ion migration channels for SPEs.Thanks to the as-prepared SPEs,the lithiumsymmetrical cells show a highly stable Li plating/stripping cycling for over 1,000 h at 0.1 mA·cm^(−2).The corresponding Li/LCoO_(2)batteries also present good rate capability and excellent cyclic performance with capacity retention of 80%after 100 cycles at room temperature.

An analytical model for the drain-source breakdown voltage of RF LDMOS power transistors with a Faraday shield

An analytical model for the drain-source breakdown voltage of an RF LDMOS power transistor with a Faraday shield is derived on the basis of the solution of the 2D Poisson equation in a p-type epitaxial layer, as well as an n-type drift region by means of parabolic approximation of electrostatic potential. The model captures the influence of the p-type epitaxial layer doping concentration on the breakdown voltage, compared with the previously reported model, as well as the effect of the other device parameters. The analytical model is validated by comparing with a numerical device simulation and the measured characteristics of LDMOS transistors. Based on the model, optimization of LDMOS device parameters to achieve proper trade-off between the breakdown voltage and other characteristic parameters such as on-resistance and feedback capacitance is analyzed.

Analytical modeling and simulation of germanium single gate silicon on insulator TFET

This paper proposes a new two dimensional（2D） analytical model for a germanium（Ge） single gate silicon-on-insulator tunnel field effect transistor（SG SOI TFET）. The parabolic approximation technique is used to solve the 2D Poisson equation with suitable boundary conditions and analytical expressions are derived for the surfacepotential,theelectricfieldalongthechannelandtheverticalelectricfield.Thedeviceoutputtunnellingcurrent is derived further by using the electric fields. The results show that Ge based TFETs have significant improvements inon-currentcharacteristics.Theeffectivenessoftheproposedmodelhasbeenverifiedbycomparingtheanalytical model results with the technology computer aided design（TCAD） simulation results and also comparing them with results from a silicon based TFET.

Hot-carrier reliability in OPTVLD-LDMOS

An improved structure that eliminates hot-carrier effects（HCE） in optimum variation lateral doping （OPTVLD） LDMOS is proposed.A formula is proposed showing that the surface electric field intensity of the conventional structure is strong enough to make a hot-carrier injected into oxide.However,the proposed structure effectively reduces the maximum surface electric field from 268 to 100 kV/cm and can be realized without changing any process,and thereby reduces HCE significantly.