Experimental Study on Material Surface Modification of Tool Steel

This paper presents the surface temperature behavior of M42 high-speed tool steel samples during N+ implantation in an industrialized GLZ-100 metal-ion implantation machine. A detail study has been made on the parameters of N+ implantation. Optimized technical parameters have been presented. The microhardness of the sample surface implanted under these parameters has been increased by a factor of 2.3, and the wear-resistance has been improved by about 5.4 times. The research on the mechanism of surface modification of M42 steel by nitrogen ion implantation has also been made.

Experiments in numerical modelling of the Pacific sea surface temperature anomalies

By using the atmosphere-ocean coupled model (CGCM) which is composed of a 2-level global atmospheric general circulation model and a 4-layer Pacific oceanic general circulation model developed in the Institute of Atmospheric Physics of Chinese Academy of Sciences, and two model climatological fields got from the two independent models' numerical integrations respectively, the Pacific sea surface temperature anomalies (SSTA) from 1988 to 1989 are simulated in this paper with observed atmospheric general circulation data and sea surface temperature fields as initial conditions and monthly coupling scheme. In order to remove systematic biases of the model climatological fields, interaction variables between atmosphere and ocean are also corrected simultaneously. The experiments show that the simulation results can be improved effectively if these interaction variables are corrected in spite of the fact that there always exist systematic biases in independent numerical simulations of atmospheric part and oceanic part within CGCM. The basic characteristics of the observed Pacific SSTA in September and October 1988 have been simulated by using the correction scheme, such as the negative SSTA domain in the whole E-quatorial Pacific east to 150°E and the positive SSTA domain in the Western Pacific, the northern subtropical Pacific and nearly the whole Southern Pacific. Further numerical simulations show that the model can simulate not only the SSTA in the Pacific and its seasonal variations but also its interannual changes (for example, La Nino event in the Equatorial Pacific terminated after May 1989) to a certain degree. Furthermore, some problems existing in experiment processes and what we shoud do in the following stage are also discussed and analysed in this paper.

Study on Compound Stabilizer Formulation for Mango Juice with Skin

[Objectives]The effects of stabilizers such as sodium carboxymethyl cellulose,pectin,sodium alginate and xanthan gum on the stability of mango juice with skin were discussed using mango as the raw material.[Methods]The formula and stability of mango beverage with skin were studied using mango juice with skin as the raw material.Four stabilizers,including pectin,sodium alginate and sodium carboxymethyl cellulose,were added to improve the stability of the juice.Based on single factor experiments and a response surface experiment,the stability model of mango juice was established to determine the best compound stabilizer.[Results]According to an orthogonal experiment on the stability of mango juice with skin,the optimum technical parameters were as follows:sodium carboxymethyl cellulose 0.20%,xanthan gum 0.08%,sodium alginate 0.18%,and pectin 0.14%,with which the optimal suspension stability was 69.12%.The optimum technical parameters from the response surface experiment were as follows:sodium carboxymethyl cellulose 0.199%,pectin 0.1185%,sodium alginate 0.163%,and xanthan gum 0.077%,with which the suspension stability was 70.32%.It was found that the stability of mango juice with skin obtained by the response surface experiment was better than that by the orthogonal experiment,and the order of factors affecting the stability of mango was sodium alginate(C)>sodium carboxymethyl cellulose(A)>pectin(D)>xanthan gum(B).[Conclusions]The formula of compound stabilizer for mango juice was optimized by the orthogonal experiment and the response surface method,providing a theoretical basis for the actual production of mango juice with skin.

Ultra fast microwave-assisted leaching for the recovery of copper and tellurium from copper anode slime

The decomposition of copper anode slime heated by microwave energy in a sulfuric acid medium was investigated. Leaching experiments were carried out in a multi-mode cavity with microwave assistance. The leaching process parameters were optimized using response surface methodology（RSM）. Under the optimized conditions, the leaching efficiencies of copper and tellurium were 99.56% ± 0.16% and 98.68% ± 0.12%, respectively. Meanwhile, a conventional leaching experiment was performed in order to evaluate the influence of microwave radiation. The mechanism of microwave-assisted leaching of copper anode slime was also investigated. In the results, the microwave technology is demonstrated to have a great potential to improve the leaching efficiency and reduce the leaching time. The enhanced recoveries of copper and tellurium are believed to result from the presence of a temperature gradient due to the shallow microwave penetration depth and the superheating at the solid-liquid interface.

Experimental investigation on pulse-contrast degradation caused by surface reflection in optical parametric chirped-pulse amplification

In this Letter, we experimentally explore the pulse-contrast degradation caused by surface reflection in optical parameter chirped-pulse amplification. Different pump-to-signal conversion efficiencies and post-pulses with different intensities are obtained by changing the seed-pulse or pump-pulse energy and inserting etalons with different reflection coefficients, respectively. The contrast measurements show that the generated first pre-pulse intensity is proportional to the product of the surface reflection intensity ratio and the square of the pump-to-signal conversion efficiency.

Combined Size and Shape Optimization of Structures with DOE,RSM and GA

In this paper,size and shape optimization problem of a machine gun system is addressed with an efficient hybrid method,in which a novel and flexible mesh morphing technique is employed to achieve fast parameterization and modification of complexity structure without going back to CAD for reconstruction of geometric models or to finite element analysis（ FEA） for remodeling. Design of experiments（ DOE） and response surface method（ RSM） are applied to approximate the constitutive parameters of a machine gun system based on experimental tests. Further FEA,secondary development technique and genetic algorithm（ GA） are introduced to find all the optimal solutions in one go and the optimal design of the demonstrated machine gun system is obtained. Results of the rigid-flexible coupling dynamic analysis and exterior ballistics calculation validate the proposed methodology,which is relatively time-saving,reliable and has the potential to solve similar problems.

Experimental observation of surface phonon absorption in Zn fine particles coated with ZnO

FINE particles have attracted much attention in the past few years due to their unique physical and chemical properties. For gas-evaporated fine metallic particles, a thin oxide layer is usually formed on their surface. According to Ruppin’s prediction, a dielectric coating on metallic particles should have a series of surface modes between ωTO and ωLO, the long-wavelength transverse and longitudinal optical phonon frequencies of the dielectric. The frequency of

Experimental evidence of Bloch surface waves on photonic crystals with thin-film LiNbO_3 as a top layer

Strong nonlinear, electro-optical, and thermo-optical properties of lithium niobate(LN) have gained much attention. However, the implementation of LiNbO_3 in real devices is not a trivial task due to difficulties in manufacturing and handling thin-film LN. In this study, we investigate an optical device where the Bloch surface wave(BSW) propagates on the thin-film LN to unlock its properties. First, access to the LN film from air(or open space) is important to exploit its properties. Second, for sustaining the BSW, one-dimensional photonic crystal(1DPhC) is necessary to be fabricated under the thin-film LN. We consider two material platforms to realize such a device: bulk LN and commercial thin-film LN. Clear reflectance dips observed in far-field measurements demonstrate the propagation of BSWs on top of the LN surface of the designed 1DPhCs.