Effect of porous surface layer on wave propagation in elastic cylinder immersed in fluid

To study the damage to an elastic cylinder immersed in fluid, a model of an elastic cylinder wrapped with a porous medium immersed in fluid is designed. This structure can both identify the properties of guided waves in a more practical model and address the relationship between the cylinder damage degree and the surface and surrounding medium. The principal motivation is to perform a detailed quantitative analysis of the longitudinal mode and flexural mode in an elastic cylinder wrapped with a porous medium immersed in fluid. The frequency equations for the propagation of waves are derived each for a pervious surface and an impervious surface by employing Biot theory. The influences of the various parameters of the porous medium wrapping layer on the phase velocity and attenuation are discussed. The results show that the influences of porosity on the dispersion curves of guided waves are much more significant than those of thickness,whereas the phase velocity is independent of the static permeability. There is an apparent “mode switching” between the two low-order modes. The characteristics of attenuation are in good agreement with the results from the dispersion curves.This work can support future studies for optimizing the theory on detecting the damage to cylinder or pipeline.

Degradation of AZ31 and AZ91 magnesium alloys in different physiological media:Effect of surface layer stability on electrochemical behaviour

This work deals with the degradation of AZ31 and AZ91 magnesium alloys when they are exposed to three types of physiological media for seven days at 37°C:Ringer's,Hanks\and simulated body fluid(SBF)solutions.A combination of immersions tests and surface characterisation methods were employed to evaluate the attack on the surface,and the stability of the formed corrosion product layers for each alloy/electrolyte system.Measurements of the Mg-ion released into the electrolytes were also carried out in order to be correlated with the degradation of the alloys.Electrochemical impedance spectroscopy(EIS)and potentiodynamic polarisation(PDP)techniques were employed to compare the performance of the alloys in these different aggressive electrolytes.According to the obtained results,the Mg-alloys exposed to Hanks'media were the less affected,which fact was attributed to a higher stability of the corrosion products layer formed in this medium,in comparison of those formed in Ringer's and SBF solutions.In add让ion,the corrosion damage was lower for AZ91 than for AZ31 alloy in all environments due to its higher Al content.The mass loss rates calculated from both immersion tests and electrochemical methods followed the same trend for comparative purposes between alloys.

Dimethyl sulfide in the atmospheric surface layer of the Equatorial Pacific Ocean

This paper reports a case study of atmospheric stability effect on dimethyl sulfide(DMS) concentration in the air. Investigation includes model simulation and field measurements over the Pacific Ocean. DMS concentration in surface sea water and in the air were measured during a research cruise from Hawaii to Tahiti. The diurnal variation of air temperature over the sea surface differed from the diurnal cycle of sea surface temperature because of the high heat capacity of sea water. The diurnal cycle of average DMS concentration in the air was studied in relation to the atmospheric stability parameter and surface heat flux. All these parameters had minima at noon and maxima in the early morning. The correlation coefficient of the air DMS concentration with wind speed (at 15 m high) was 0. 64. The observed concentrations of DMS in the equatorial marine surface layer and their diurnal variability agree well with model simulations. The simulated results indicate that the amplitude of the cycle and the mean concentration of DMS are dependent on the atmospheric stratifications and wind speed.

Non-Gaussian Lagrangian Stochastic Model for Wind Field Simulation in the Surface Layer

Wind field simulation in the surface layer is often used to manage natural resources in terms of air quality,gene flow(through pollen drift),and plant disease transmission(spore dispersion).Although Lagrangian stochastic(LS)models describe stochastic wind behaviors,such models assume that wind velocities follow Gaussian distributions.However,measured surface-layer wind velocities show a strong skewness and kurtosis.This paper presents an improved model,a non-Gaussian LS model,which incorporates controllable non-Gaussian random variables to simulate the targeted non-Gaussian velocity distribution with more accurate skewness and kurtosis.Wind velocity statistics generated by the non-Gaussian model are evaluated by using the field data from the Cooperative Atmospheric Surface Exchange Study,October 1999 experimental dataset and comparing the data with statistics from the original Gaussian model.Results show that the non-Gaussian model improves the wind trajectory simulation by stably producing precise skewness and kurtosis in simulated wind velocities without sacrificing other features of the traditional Gaussian LS model,such as the accuracy in the mean and variance of simulated velocities.This improvement also leads to better accuracy in friction velocity(i.e.,a coupling of three-dimensional velocities).The model can also accommodate various non-Gaussian wind fields and a wide range of skewness–kurtosis combinations.Moreover,improved skewness and kurtosis in the simulated velocity will result in a significantly different dispersion for wind/particle simulations.Thus,the non-Gaussian model is worth applying to wind field simulation in the surface layer.

Effect of Electric Field-Assisted Diffusion on Surface Layer Structure and Mechanical Properties of Soda-Lime Glasses

Soda-lime glasses were treated by electric field-assisted diffusion（EFAD） process. The mechanical properties and structural evolution on both glass anode and cathode surfaces were investigated, respectively. It was found that the EFAD resulted in the formation of a Na depletion layer on anode surface, which caused the relaxation of the glass anode surface network and the formation of a number of defects. Correspondingly, the hardness and flexural strength declined in anode surface compared to that of the original glass. On the other hand, the EFAD also created a compressive layer on cathode surface, causing the improvement of the hardness and flexural strength on cathode surface. The defected structure could be reconstructed by additional annealing process.

Physical mechanism and numerical simulations of surface layer temperature inversion in tropical ocean

The one-dimensional Kraus- Turner mixed layer model improved by Liu is developed to consider the effect of salinity and the equa- tions of temperature and salinity under the mixed layer. On this basis, the processes of growth and death of surface layer temperature inversion is numerically simulated under different environmental parameters. At the same time, the physical mechanism is preliminari- ly discussed combining the observations at the station of TOGA- COARE 0°N, 156°E. The results indicate that temperature inversion sensitively depends on the mixed layer depth, sea surface wind speed and solar shortwave radiation, etc., and appropriately meteoro- logical and hydrological conditions often lead to the similarly periodical occurrence of this inversion phenomenon.

Hot-forging Die Cavity Surface Layer Temperature Gradient Distribution and Determinant

Based on the car front-wheel-hub forging forming process of numerical simulation, the temperature gradient expression of forging model cavity near the surface layer was got ten, which illustrates that the forging temperature gradient is related to forging die materials thermal conductivity, specific heat and impact speed, and the correlation coefficient is 0.97. Under the different thermal conductivity, heat capacity and forging speed, the temperature gradient was compared with each other. The paper obtained the relevant laws, which illustrates the temperature gradient relates to these three parameters in a sequence of thermal conductivity 〉 impact speed〉 specific heat capacity. To reduce thermal stress in the near-surface layer of hot forging cavity, the material with greater thermal conductivity coefficient and specific heat capacity should be used.

An Analysis of the Turbulent Structure in the Unstable Surface Layer nearby a Shelter Belt

An analysis was performed of the turbulent data obtained from Yucheng experimental station in the Shandong Province in 1984. [t is shown that at variant wind speed, the spectra of streamwise velocity remain similar and the intensity of wind fluctuations is proportional to wind speed in the downwind area of shelter belt. Therefore, we may decide the similarity of wind fluctuations by a speed scale and a length scale which is not correlated with stability, σu /V0 = F(X / H). The -5/3 power range of temperature spectra extends to lower frequency. The variation of ratio σ0 /T. with stability becomes σ0 / T . = C(X / H)( - Z / L)-1/3 . There is not such an extension of -5 / 3 power range in the humidity spectra.

TURBULENCE STRUCTURE AND TRANSFER CHARACTERISTICS IN THE SURFACE LAYER OF HEIFE GOBI AREA

Based on the HEIFE 1988 and 1990 pilot observations,an analysis on the turbulence structure of Gobi surface layer,mainly on the similarity formulations of wind and temperature variances,the spectra and cospectra characteristics,is presented.The phenomenon of downward water vapor flux over Gobi desert in daytime is confirmed in both observations,this and the well-known‘oasis effect’are two sides of a local mesoscale circulation.

Non-Metallic Inclusion Distribution in Surface Layer of IF Steel Slabs

Non-metallic inclusion distribution in the surface layer of IF steel slabs during unsteady casting was investigated using the original position statistic distribution analysis（OPA）method.It was found that most non-metallic inclusions larger than 10 μm existed in the subsurface layers of 0.5-3.5 mm from the slab surfaces and very few large non-metallic inclusions were found in the inner regions（≥4.5 mm from slab surfaces）.In addition,it was found that at high casting speed level（1.4 m/min）,even a slight change of casting speed could result in a remarkable increase of the non-metallic inclusions.Thus,at high casting speed,changing the casting speed should be avoided or considerably lower speed changing rate must be used.

THE COMBINATORY METHOD FOR DETERMINATION OF THE TURBULENT FLUXES AND UNIVERSAL FUNCTIONS IN THE SURFACE LAYER

A combinatory method of determining the turbulent fluxes in the surface layer has been developed and their general representations have been thus obtained.The universal functions of the (M-O) similarity in the surface layer can be de- termined by the method.The results calculated by using the ITCE's data indicate that the method is feasible.

Evaluation of the CAM and PX Surface Layer Parameterization Schemes for Momentum and Sensible Heat Fluxes Using Observations

In this study,the performances of the Community Atmosphere Model(CAM)and Pleim–Xiu(PX)surface layer parameterization schemes are investigated by using field observations.The parameterization schemes are evaluated against continuous momentum and sensible heat flux observations measured at two flat and homogeneous grassland sites in the suburb of Nanjing,eastern China.The observations were conducted from 30 December 2014 to 18 April 2017 at Jiangxinzhou and from 9 February 2015 to 26 March 2018 at Jiangning.It is found that the momentum flux is overall in good agreement with the observation,and the sensible heat flux is overestimated.The parameterizations of the momentum and sensible heat fluxes well capture the diurnal and seasonal patterns seen in the observations at the two sites.At Jiangxinzhou,the PX parameterization underestimates the momentum flux throughout the day and the CAM parameterization slightly overestimates it around the noon,while they underestimate the momentum flux throughout the year.The two parameterizations overestimate the sensible heat flux in the daytime as well as over the entire year.At Jiangning,the two parameterizations overestimate the momentum flux throughout the day and the sensible heat flux in the daytime,and overestimate both of them over the entire year.The two parameterizations are not significantly different from each other in reproducing the turbulent fluxes at the same site,while they perform differently at the two sites in terms of statistics.In addition,the parameterized fluxes increase with increased roughness length.

Effect of surface layer softening from previous electrochemical corrosion on electrochemical cold drawing of Q235 steel bar

The effects of H_(2)SO_(4)concentration and current in electrochemical corrosion on surface layer softening or plasticizing of Q235 steel bar and their effects on subsequent electrochemical cold drawing(ECD)were investigated.The results indicate that the electrochemical corrosion can soften or plasticize the surface layer of Q235 steel bar and then make the subsequent ECD be conducted more easily.The softening degree and thickness of the surface layer are continuously enhanced with increasing corrosion rate,i.e.,increasing H_(2)SO_(4)concentration or current,due to the generation of more vacancy clusters in deeper regions of surface layer.These vacancy clusters then relax dislocations through being absorbed during ECD,and the formation and movement of additional dislocation flux are thereby enhanced,resulting in the further obvious decrease in the drawing force.It is also due to the enhanced formation and movement of additional dislocation flux that the dislocation density and thus the hardness of the surface layer are decreased,as well as that the texture structure is weakened.These behaviors are enhanced as the corrosion rate increases.

Analytic derivation of Monin-Obukhov similarity function for open atmospheric surface layer

The Monin-Obukhov(MO)similarity functionφm of the atmospheric surface layer(ASL)describing the deviation from the log law of the canonical turbulent boundary layer because of thermal stratification has been traditionally determined empirically.This study presents a unified analytic expression derived from a symmetry-based theory of wall turbulence,called structural ensemble dynamics(SED),which postulates a generalized dilation symmetry principle expressing the effect of the wall on turbulence,leading to an analytic multi-regimes expression for the mixing length.For ASL in unstable and stable conditions(i.e.,UC and SC),a unified two-regime formula of the mixing length is proposed,leading to aφm,similar to the Businger-Dyer(BD)formula;with a simplified model energy balance equation,φm is completely specified with no free parameter.Furthermore,the theory allows the study of the open ASL’s underlying additional physical processes such as bottom-up or top-down flux due to pressure variations Tp.Assuming that Tp is decomposed into shear-like and buoyancy-like components,we propose new explanations for two important features of typical ASL:a significantly smaller Karman constant of 0.36 and a varyingφm for SC mean speed profiles.The theory is validated by the data obtained at Kansas and also at Qingtu Lake Observation Array in Northern China for a variety of heat flux conditions.In conclusion,due to pressure variations,we assert that ASL is intrinsically open and that the current theory offers a new basis for its quantification.

TURBULENCE CHARACTERISTICS OF THE ATMOSPHERIC SURFACE LAYER OVER AN OPEN GRASSLAND

Described in this paper is an experiment on atmosphere-surface turbulent exchange and boundary layer turbulence properties conducted in July 1994 over the Kerqin Grassland,Jilin, China.The characteristics of the turbulent spectrum,and the relationships of the standard deviation of the turbulent velocity components and sensible heat flux with the atmospheric stability are studied using data from a sonic anemometer and a fast-response platinum resistance thermometer mounted on a 100 m tower.The results show that in the surface layer over a flat, uniform and open grassland,for a broad stability range(-22.12≤Z_L≤17.98),the velocity spectra obey the-2/3 power law in the inertial subrange,and 1 power law at low frequencies. Under near neutral stratification,σ_u/u_*=1.20,σ_v/u_*=1.23 and σ_w/u_*=1.02.For Z_i/L≤ -0.2,the standard deviations of the turbulent velocity components follow a 1/3 power law.For Z_i/L≤-0.1,the standard deviation of the temperature fluctuations follows a-1/3 power law, and as Z_i/L≤-0.08,it exhibits nonlinear behavior.Sensible heat flux is well correlated to the stability parameter.

Improved dual-channel 4H-SiC MESFETs with high doped n-type surface layers and step-gate structure

An improved dual-channel 4H-SiC MESFET with high doped n-type surface layer and step-gate structure is proposed, and the static and dynamic electrical performances are analyzed.A high doped n-type surface layer is applied to obtain a low source parasitic series resistance, while the step-gate structure is utilized to reduce the gate capacitance by the elimination of the depletion layer extension near the gate edge, thereby improving the RF characteristics and still maintaining a high breakdown voltage and a large drain current in comparison with the published SiC MESFETs with a dual-channel layer.Detailed numerical simulations demonstrate that the gate-to-drain capacitance, the gate-to-source capacitance, and the source parasitic series resistance of the proposed structure are about 4%, 7%, and 18% smaller than those of the dual-channel structure, which is responsible for 1.4 and 6 GHz improvements in the cut-off frequency and the maximum oscillation frequency.

Optical rectification in surface layers of germanium

In this Letter, we have demonstrated significant electric field induced（EFI） optical rectification（OR） effects existing in the surface layers of germanium（Ge） and measured the distributions of EFI OR signals along the normal directions of surface layers of Ge samples. Based on the experimental results, the ratios of the twoe-order susceptibility components χ2 effTzzz∕χe2 effTeffective secondzxxfor Ge（001）, Ge（110）, and Ge（111） surface layers can be estimated to be about 0.92, 0.91, and 1.07, respectively. The results indicate that the EFI OR can be used for analyzing the properties on surface layers of Ge, which has potential applications in Ge photonics and optoelectronics.

A THREE-DIMENSIONAL RANDOM DISPERSION MODEL WITHIN SURFACE LAYER

Taking advantage of the relation of lateral Lagrangian time scale T_(LY) with the stability and height, we establish a three-dimensional random dispersion model and simulate the dispersing process of a ground source within the surface layer. The results calculated show that under the condition of stable stratifica- tion our model is obviously better improved than those obtained by assuming T_(LY) to be constant, while under unstable condition, not much improved.

EXPERIMENTAL ANALYSIS OF THE TURBULENT TRANSFER COEFFICIENT FOR SENSIBLE HEAT IN THE SURFACE LAYER OVER THE QINGHAI-XIZANG PLATEAU

This study deals with the turbulent structure in the surface layer over the Qinghai-Xizang Plateau.Using gradient transfer and heat balance methods we have determined the nondimensional coefficient 1/(?)_m(?)h in the expression of turbulent transfer coefficient for sensible heat (K_h).It is found that the results are in good agreement with the 1/(?)_m(?)_h obtained by Pruitt,et al.The K_h at a height of 1m under cloudy and cloudless conditions is calculated.Finally,the ratio of K_h to momentum turbulent coefficient over the plateau is compared with those over plains.

Tribological analysis of the surface layer coated by sintered serpentine-reinforced composites

In this work,the serpentine powders were sintered to make the serpentine-reinforced Al-matrix composites,and the microstructures of which were characterized by differential scanning calorimetry,thermal gravimetric analyzer,and X-ray diffractometer.Scanning electron microscopy equipped with energy dispersive spectroscopy.Results show that the sintered serpentine powders were deeply absorbed on the worn surface and embedded in the furrows and scratches of the matrix,forming a self-repairing surface layer which reduces the friction coefficient.The surface layer coated by serpentine was compact,dense,and uniform with the friction time prolonged,compensating the worn loss and increasing the matrix mass.