Research status and prospects of the fractal analysis of metal material surfaces and interfaces

As a mathematical analysis method,fractal analysis can be used to quantitatively describe irregular shapes with self-similar or self-affine properties.Fractal analysis has been used to characterize the shapes of metal materials at various scales and dimensions.Conventional methods make it difficult to quantitatively describe the relationship between the regular characteristics and properties of metal material surfaces and interfaces.However,fractal analysis can be used to quantitatively describe the shape characteristics of metal materials and to establish the quantitative relationships between the shape characteristics and various properties of metal materials.From the perspective of two-dimensional planes and three-dimensional curved surfaces,this paper reviews the current research status of the fractal analysis of metal precipitate interfaces,metal grain boundary interfaces,metal-deposited film surfaces,metal fracture surfaces,metal machined surfaces,and metal wear surfaces.The relationship between the fractal dimensions and properties of metal material surfaces and interfaces is summarized.Starting from three perspectives of fractal analysis,namely,research scope,image acquisition methods,and calculation methods,this paper identifies the direction of research on fractal analysis of metal material surfaces and interfaces that need to be developed.It is believed that revealing the deep influence mechanism between the fractal dimensions and properties of metal material surfaces and interfaces will be the key research direction of the fractal analysis of metal materials in the future.

MXenes: Versatile 2D materials with tailored surface chemistry and diverse applications

MXenes,the most recent addition to the 2D material family,have attracted significant attention owing to their distinctive characteristics,including high surface area,conductivity,surface characteristics,mechanical strength,etc.This review begins by presenting MXenes,providing insights into their structural characteristics,synthesis methods,and surface functional groups.The review covers a thorough analysis of MXene surface properties,including surface chemistry and termination group impacts.The properties of MXenes are influenced by their synthesis,which can be fluorine-based or fluorinedependent.Fluorine-based synthesis techniques involve etching with fluorine-based reagents,mainly including HF or LiF/HCl,while fluorine-free methods include electrochemical etching,chemical vapor deposition(CVD),alkaline etching,Lewis acid-based etching,etc.These techniques result in the emergence of functional groups such as-F,-O,-OH,-Cl,etc.on the MXenes surface,depending on the synthesis method used.Properties of MXenes,such as electrical conductivity,electronic properties,catalytic activity,magnetic properties,mechanical strength,and chemical and thermal stability,are examined,and the role of functional groups in determining these properties is explored.The review delves into the diverse applications of MXenes,encompassing supercapacitors,battery materials,hydrogen storage,fuel cells,electromagnetic interference(EMI) shielding,pollutant removal,water purification,flexible electronics,sensors,additive manufacturing,catalysis,biomedical and healthcare fields,etc.Finally,this article outlines the challenges and opportunities in the current and future development of MXenes research,addressing various aspects such as synthesis scalability,etching challenges,and multifunctionality,and exploring novel applications.The review concludes with future prospects and conclusions envisioning the impact of MXenes on future technologies and innovation.

Frictional contact analysis of a rigid solid with periodic surface sliding on the thermoelectric material

Understanding and characterizing rough contact and wavy surfaces are essential for developing effective strategies to mitigate wear,optimize lubrication,and enhance the overall performance and durability of mechanical systems.The sliding friction contact problem between a thermoelectric(TE)half-plane and a rigid solid with a periodic wavy surface is the focus of this investigation.To simplify the problem,we utilize mixed boundary conditions,leading to a set of singular integral equations(SIEs)with the Hilbert kernels.The analytical solutions for the energy flux and electric current density are obtained by the variable transform method in the context of the electric and temperature field.The contact problem for the elastic field is transformed into the second-kind SIE and solved by the Jacobi polynomials.Notably,the smoothness of the wavy contact surface ensures that there are no singularities in the surface contact stress,and ensures that it remains free at the contact edge.Based on the plane strain theory of elasticity,the analysis primarily examines the correlation between the applied load and the effective contact area.The distribution of the normal stress on the surface with or without TE loads is discussed in detail for various friction coefficients.Furthermore,the obtained results indicate that the in-plane stress decreases behind the trailing edge,while it increases ahead of the trailing edge when subjected to TE loads.

Material That Talks:Material Use of Architectural Surface in Semiotic Implications

According to the language of post-modern architecture which Charles Jencks proposed in the 1980s,form has been very crucial for architectural language expression.However,many suggestions also imply that the material which is deployed for building is also significant in the linguistic expression of architecture.Based on this consideration,the material use of architecture will also contain semiotic implications,whether for architects or for social consensus.How the material talks and what it says are two questions that need to be clarified.To answer these two questions,some empirical works in architecture will be examined to reveal the messages which could be delivered in architectural materials.Before this,semiotic debates in architecture will be reviewed.Then,two empirical works,one in the West and one in the East,will be considered particularly for their material deployments on the surface(façade).Since the architectural surface is the most tangible part of architecture in terms of material use,the surfaces of both projects will be discussed in detail with their implications and the atmospheres which the materials formulated and created.This paper will conclude with a consideration of the possible implications from these projects and also the different expressions of material use,which will help us to rethink the expression of the material use of architectural surface.

High specific surface area porous graphene grids carbon as anode materials for sodium ion batteries

Although great accomplishments of functional material synthesis have been achieved in sodium ion batteries(SIBs)recently,there are still numerous challenges and problems in preparing carbon-based materials with porous architectures and enough lattice distance for Na^+insertion.Herein we report a templated strategy to synthesize 3D porous graphene girds(PGGs)consisting of several stacking graphene structure with ultrahigh surface area and hierarchical connected structure by employing Ag nanoparticles(NPs).The Ag NPs will regenerate for decreasing the experimental cost,also in line with principles of green chemistry and environmentally friendly strategy.The PGGs obtain advanced specific capacity of160 m A h g^(-1)at current density of 50 m A h g^(-1).Moreover,112 mA h g^(-1)capacity can be gained at 1 A h g^(-1)during 1000 cycles.Due to their porous architecture,ultrahigh surface area and low amorphous graphited structure,PGGs electrode showed the excellent electrochemical performance in high rate capability.

Enhanced microwave absorption property of silver decorated biomass ordered porous carbon composite materials with frequency selective surface incorporation

Porous carbon(PC)is a promising electromagnetic(EM)wave absorbing material thanks to its light weight,large specific surface area as well as good dissipating capacity.To further improve its microwave absorbing performance,silver coated porous carbon(Ag@PC)is synthesized by one-step hydro-thermal synthesis process making use of fir as a biomass formwork.Phase compositions,morphological structure,and microwave absorption capability of the Ag@PC has been explored.Research results show that the metallic Ag was successfully reduced and the particles are evenly distributed inward the pores of the carbon formwork,which accelerates graphitization process of the amorphous carbon.The Ag@PC composite without adding polyvinyl pyrrolidone(PVP)exhibits higher dielectric constant and better EM wave dissipating capability.This is because the larger particles of Ag give rise to higher electric conductivity.After combing with frequency selective surface(FSS),the EM wave absorbing performance is further improved and the frequency region below-10 d B is located in8.20-11.75 GHz,and the minimal reflection loss value is-22.5 dB.This work indicates that incorporating metallic Ag particles and FSS provides a valid way to strengthen EM wave absorbing capacity of PC material.

New double yield surface model for coarse granular materials incorporating nonlinear unified failure criterion

A new double-yield-sarface （DYS） model was developed to characterize the strength and deformation behaviors of coarse granular materials （CGMs）. Two kinds of deformation mechanisms, including the shear and compressive plastic deformation, were taken into account in this model, These two deformation mechanisms were described by the shear and compressive yield functions, respectively. The Lode angle dependent formulations of proposed model were deduced by incorporating a 3D nonlinear unified failure criterion. Some comparisons were presented between the numerical predictions of proposed model and test data of true triaxial tests on the modeled rockfills. The model predictions are in good agreement with the test data and capture the strain hardening and plastic volumetric dilation of CGMs. These findings verify the reasonability of current DYS model, and indicate that this model is well suited to reproduce the stress-strain-volume change behavior of CGMs in general.

Study of the Material Transfer Characteristics and Surface Morphology Due to Arc Erosion of PtIr Contact Materials

By means of breaking tests on PtIr contact materials via a JF04C contact material testing machine, it was attempted to elucidate the characteristics of the various surface morphology and material transfer after the arc erosion process caused by break arc. The material transfer characteristics appeared in the experiments were concluded and analyzed. Meanwhile, the morphology of the anode and cathode surface were observed and analyzed by SEM.

Effect of Surface Roughness and Materials Composition

In the mouth, biofilm formation occurs on all soft and hard surfaces. Microbial colonization on such surfaces is always preceded by the formation of a pellicle. The physicochemical surface properties of a pellicle are largely dependent on the physical and chemical nature of the underlying surface. Thus, the surface structure and composition of the underlying surface will influence on the initial bacterial adhesion. The aim of this review is to evaluate the influence of the surface roughness and the restorative material composition on the adhesion process of oral bacteria. Both in vitro and in vivo studies underline the importance of both variables in dental plaque formation. Rough surfaces will promote plaque formation and maturation. Candida species are found on acrylic dentures, but dentures coating and soaking of dentures in disinfectant solutions may be an effective method to prevent biofilm formation. Biofilms on gold and amalgam are thick, but with low viability. Glass-ionomer cement collects a thin biofilm with a low viability. Biofilms on composites cause surface deterioration, which enhances biofilm formation. Biofilms on ceramics are thin and highly viable.

Characteristics of surface waves in anisotropic left-handed materials

We report the coexistence of TE and TM surface modes in certain same frequency domain at the interface between one isotropic regular medium and another biaxially anistotropic left-handed medium. The conditions for the existence of TE and TM polarized surface waves in biaxially anisotropic left-handed materials are identified, respectively. The Poynting vector and the energy density associated with surface modes are calculated. Depending on the system parameters, either TE or TM surface modes can have the time averaged Poynting vector directed to or opposite to the mode phase velocity. It is seen that the characteristics of surface waves in biaxially anisotropic left-handed media are significantly different from that in isotropic left-handed media.

Ultralow Interfacial Thermal Resistance of Graphene Thermal Interface Materials with Surface Metal Liquefaction

Developing advanced thermal interface materials(TIMs)to bridge heat-generating chip and heat sink for constructing an efficient heat transfer interface is the key technology to solve the thermal management issue of high-power semiconductor devices.Based on the ultra-high basal-plane thermal conductivity,graphene is an ideal candidate for preparing high-performance TIMs,preferably to form a vertically aligned structure so that the basal-plane of graphene is consistent with the heat transfer direction of TIM.However,the actual interfacial heat transfer efficiency of currently reported vertically aligned graphene TIMs is far from satisfactory.In addition to the fact that the thermal conductivity of the vertically aligned TIMs can be further improved,another critical factor is the limited actual contact area leading to relatively high contact thermal resistance(20-30 K mm^(2) W^(−1))of the“solid-solid”mating interface formed by the vertical graphene and the rough chip/heat sink.To solve this common problem faced by vertically aligned graphene,in this work,we combined mechanical orientation and surface modification strategy to construct a three-tiered TIM composed of mainly vertically aligned graphene in the middle and micrometer-thick liquid metal as a cap layer on upper and lower surfaces.Based on rational graphene orientation regulation in the middle tier,the resultant graphene-based TIM exhibited an ultra-high thermal conductivity of 176 W m^(−1) K^(−1).Additionally,we demonstrated that the liquid metal cap layer in contact with the chip/heat sink forms a“liquid-solid”mating interface,significantly increasing the effective heat transfer area and giving a low contact thermal con-ductivity of 4-6 K mm^(2) W^(−1) under packaging conditions.This finding provides valuable guidance for the design of high-performance TIMs based on two-dimensional materials and improves the possibility of their practical application in electronic thermal management.

Universality and Specificity of Fractal Dimension of Fractured Surfaces in Materials

After calculation on the fracture angles under various conditions of specific surface energies with different symmetry operations of rotation, the complicated behavior of dependence of fractal dimension on the structure of crystal is shown. It is found that the crack propagates along the weakest crystal plane no matter what the direction of the maximum stress is if the anisotropy is sufficiently strong; and then, the fractal dimension of the fractured surfaces might be determined by the approximate fractal structure already existed in the material. Specificity of the fractal dimension of fractured surfaces would be easy to appear in this case. Reversely, the crack propagates along the direction of the maximum stress no matter what direction of the weakest crystal plane is if the anisotropy is sufficiently weak. Universality of the fractal dimension of fractured surfaces would be possible to appear in this case. In many real materials, universality and specificity of the materials are associated. The fractal dimension measured may more or less be influenced by the structure of materials and it shows its universality through the specificity of materials.

Comparison study of two aldehyde group finishing agents in surface modification of up-conversion luminescence materials

Surface modification of up-conversion luminescence materials （Na[Y0.57Yb0.39Er0.04]F4 modified by amino groups） by grafting and modifying with aldehyde groups was studied by means of Fourier transform infrared spectroscopy （FTIR）, scanning electron microscopy （SEM）, thermogravimetric analysis （TGA）, and emission spectrum （EM）. The surface modification effect was compared using two different finishhag agents, p-phthalaldehyde and glutaraldehyde. It was found that the surface of up-conversion luminescence materials could be modified by aldehyde groups of the two finishing agents, the systematic dispersibility and the thermostability of the up-conversion luminescence material modified by p-phthalaldehyde were better than those of the material modified by glutaraldehyde, and the luminous intensity of the material modified by p-phthalaldehyde was increased. The AI （the ratio of the suspended segmental quality in the specimen to the total mass of the specimen） of the material modified by p-phthalaldehyde was higher than that of the material modified by glutaraldehyde. It is obviously seen that the embellishment effect of p-phthalaldehyde as a finishing agent was better than that of glutaraldehyde. In addition, the reasons why p-phthalaldehyde is a good finishing agent are also explained.

Application of the Zisman Critical Surface Tension Technique to Textile Materials Using Contact Angle Measurements

This is the first one that applies the Zisman critical surface tension technique successfully to textile materials. It was accomplished by carefully determination of the contact angle of fabric. The deviation caused by the porous structure of the fabric will be taken into account. To do so, a Jens equation is applied, and the measured contact angles can be corrected. The surface porosity was determined by measurement and approximate calculation, and the chemical composition of the surface was characterized by means of attenuated total reflection Fourier-transform infrared(FTIR/ATR).

Surface Modification and Model of Glassy Cementitious Materials

Basic theory of surface modification about glassy cementitous materials is presented. At the same time modified glassy cementitous materials were manufactured by means of point activation and disperse and grind aid according to technology of mechanical-chemistry. This theory about surface modification has been proved by some experimental results such as SEM, size distribution, fluidity of the paste, physical-mechanical properties of the hardened paste and heat of the hydration. The particle size of modified fly ash is tending to become smaller and the shape of microfine particles seems a ball; strength of modified glassy cementitous materials and ordinary portland cement compound paste has a obvious increment and fluidity of the paste also has a noticeable improvement; surface modification also can accelerate the formation of paste structure to a certain degree. Besides a model about the interactive mechanism of modified glassy cementitous materials and ordinary portland cement is put forward.

Effect of Counterface Materials on Friction and Wear Behavior of Double Glow Glasma Discharge Surface Alloying on Ti22Al25Nb Alloy

Samples of surface chromising layer were prepared by the double glow plasma discharge technique. X-ray diffraction and X-ray photoelectron spectroscopy（XPS） analysis of dif-ferent elements confirmed the formation of chrome in the layer. Their tribological properties were investigated by pin-on-disk tribometer. Silicon nitride, GCr15, and nickel-based alloy were selected as counterface materials. Results indicated that the lowest friction coefficients and wear rate were ob-tained when substrate and chromising layer against nickel-based alloy, and tribological properties of chromising layer were better than those of substrate. The highest friction and wear rate were samples against silicon nitride alloys. In the case of three rubbing pairs, the unchangeable materials against different hardness counterfaces leaded to different wear mechanisms. Samples against silicon nitride exhibited abrasive mechanism, and when GCr15 and nickel-based alloy were used as counterface, transfer film and glaze layer formed on the contact surface, which played the main role in decreasing friction and wear.

Worn surface characteristics of Cu-based powder metallurgy bake materials for aircraft

Cu-based powder metallurgy brake materials are used for aircraft widely and successfully.The characteristics of worn surface of Cu-based powder metallurgy brake materials for aircraft after working under service condition were studied,and two main wear mechanisms were discussed.The results show that the main components of worn surface are graphite,SiO2,Fe,Cu and oxide of Fe(Fe3O4 and FeO);the worn surface can be divided into three zones:severe wear zone,mild wear zone,and low wear zone; fatigue wear and grain wear are the main wear mechanisms of Cu-based materials.Some debris kept between brake discs reduce the wear rate to a certain extent by taking part in the regeneration of friction film.

Study on Surface Roughness in Micro Milling of Single Crystal Materials

Micro milling is a machining method of high precision and efficiency for micro components and features.In order to study the surface quality of single crystal materials in micro milling,the two-edged cemented carbide tool milling cutter with 0.4 mm diameter was used,and the orthogonal experiment was completed on the micro-milling of single crystal aluminum material.Through the analysis of statistical results,the primary and secondary factor which impacting on surface quality were found as follows:spindle speed,feed rate,milling depth.The ideal combination of optimized process parameters were obtained,when the spindle speed was 36000 r/min,the milling depth was 10μm,the feed rate was 80μm/s,which made the milling surface roughness is 0.782μm and minimal.Single crystal materials removal mechanism were revealed,and the influence of cutting parameters on micro-milling surface were discussed,the reason of tool wear was analyzed.Those provide a certain theoretical and experimental basis for micro milling of single crystal materials.

Comparative Study on the Surface Dose of Some Bolus Materials

In order to investigate the possibility of using different materials as bolus in radiotherapy, five samples denoted by S2 - S6 were prepared and analyzed by comparison with one available commercial bolus denoted by S1. Sample S1 was a thermoplastic material from Qfix;S2 was a moldable silicon rubber (RTV-530 from Prochima);S3 and S4 were obtained by adding micrometric particles of Al and Cu respectively (at the same mass concentration of 5.5%);S5 was another moldable silicon rubber (GSP400 from Prochima) and S6 was a mixture of GSP400 and micrometric particles of Cu (at the mass concentration of 5.5%). The measurements of normalized transmitted dose as a function of sample thickness were performed for all samples (S1 - S6) at two values of electron beam energy (6 and 9 MeV) produced by a linear accelerator VARIAN 2100SC. The results showed that the maximum of the normalized transmitted dose of manufactured samples (S2 - S6) is registered at smaller sample thicknesses than for the analyzed commercial bolus (sample S1). The smallest sample thickness corresponding to normalized maximum point dose is obtained for sample S2 (RTV-530). Measurements performed for electron beam energy of 6 and 9 MeV have proven the possibility of using the manufactured samples as bolus in radiotherapy.

The Study of the Antimicrobial Properties of Selected Engineering Materials’ Surfaces

This paper studies the antimicrobial activity of selected engineering materials surfaces at room and chill temperatures. The antimicrobial effects of selected materials surfaces were evaluated by dropping the test pieces into prepared cultures of Bacillus spp, Escherichia coli, and Staphylococcus aereus isolated from fruits, animal feaces and natural environment respectively. Bacteria count obtained after 0, 30, 60, 90, 120, 180, 240 and 300 minutes at room temperature and chill condition was taken and compared with their initial count. The amount of live bacteria drops by several orders of magnitude, to zero, on metallic copper and brass within 30 to 300 minutes in both room and chill conditions. In contrast, no reduction is seen in the number of colonies of live bacteria on plastics, ceramic and stainless steel in both room and chill conditions. These results suggest that the selection of metallic copper and brass for touch surfaces in hospitals, surfaces exposed to fruit processing and household utensils can materially assist in reducing bacterial contamination, which should lead to a reduction in the transmission of infectious organisms.