Nickel-based superalloy architectures with surface mechanical attrition treatment: Compressive properties and collapse behaviour

Surface modifications can introduce natural gradients or structural hierarchy into human-made microlattices,making them simultaneously strong and tough.Herein,we describe our investigations of the mechanical properties and the underlying mechanisms of additively manufactured nickel–chromium superalloy(IN625)microlattices after surface mechanical attrition treatment(SMAT).Our results demonstrated that SMAT increased the yielding strength of these microlattices by more than 64.71%and also triggered a transition in their mechanical behaviour.Two primary failure modes were distinguished:weak global deformation,and layer-by-layer collapse,with the latter enhanced by SMAT.The significantly improved mechanical performance was attributable to the ultrafine and hard graded-nanograin layer induced by SMAT,which effectively leveraged the material and structural effects.These results were further validated by finite element analysis.This work provides insight into collapse behaviour and should facilitate the design of ultralight yet buckling-resistant cellular materials.

Improved Fatigue Behavior of Pipeline Steel Welded Joint by Surface Mechanical Attrition Treatment(SMAT)

A pipeline steel X80 with welded joint was subjected to surface mechanical attrition treatment （SMAT）. After SMAT, a nanostructure surface layer with an average grain size of about 10 nm was formed in the treated sample, and the fatigue limit of the welded joint was elevated by about 13% relative to the untreated joints. In the low and the high amplitude stress regimes, both fatigue strength and fatigue life were enhanced. Formation of the nanostructured surface layer played more important role in the enhanced fatigue behavior than that of residual stress induced by the SMAT.

Study on the friction and wear properties of the surface nanocrystallized 1.0C-1.5Cr steel induced by the surface mechanical attrition treatment

Nano-structured layers are fabricated on the surface of 1.0C-1.5Cr steel by using the surface mechanical attrition treatment(SMAT)technology,and the microstructures of the surface nano-crystallization layers are characterized by means of X-ray diffraction(XRD)and transmission electron microscopy(TEM).The friction and wear properties are also investigated by a UMT-2 friction and wear tester.Experimental research has indicated that the average diameter of nanocrystalline grains in the surface layer after being treated for 15 min is in the range of 10-20 nm,and ferrite and cementite grains can not be identified by their morphologies.The wear-resistance of the specimen treated for 15 min has been doubled,compared with that of the matrix due to the grain refinement to a nano-sized scale.The lowest friction coefficient is 0.27,which is for the specimen treated for 30 min,resulting from the dissolution of the cementite phase and the formation of a relative homogenous structure.The SMAT technique for enhancing the wear-resistance of the 1.0C-1.5Cr steel has an optimum processing time,which is in the range of 15-30 min.The dominant wear mechanism of the specimen treated for 15 min changes from adhesive wear into particle wear.

利用SMAT和SPS在纯铁表面制备铁镍合金层

利用放电等离子烧结(SPS)技术实现了镍粉在纯铁表面铁镍合金层的制备,通过纯铁表面机械研磨(SMAT)的预处理获得表面纳米层和梯度结构有效促进了铁镍的扩散,提升了合金层厚度和结合强度。通过XRD、SEM、EDS、硬度和摩擦磨损实验等,表征铁镍合金层形貌、组成,测试了力学性能。结果表明:纯铁试样经过SMAT预处理和SPS后,在表面获得了约50μm的铁镍合金层,沿着深度方向镍元素含量梯度变化,而在未经SMAT预处理的纯铁表面仅有25μm的合金层,本方法实现了合金层厚度明显增加。SMAT预处理后的SPS试样硬度提升,表面磨损量和犁沟槽深度减少,结合力增强,耐磨性提升明显。

Influence of Surface Nano-structured Treatment on Pack Boriding of H13 Steel

In order to lower the boriding temperature of hot work steel H13, method of surface mechanical attrition treatment （SMAT）, which can make the grain size of the surface reach nano-scale, was used before pack boriding. The growth of the boride layer was studied in a function of boriding temperature and time. By TEM （transmission electron microscopy）, SEM （scanning electron microscopy）, XRD （x-ray diffraction） and microhardness tests, the grain size, thermal stability of the nano-structured （NS） surface and the thickness,appearance, phases of the surface boride layer were studied. Kinetic of boriding was compared between untreated samples and treated samples. Results showed that after SMAT, the boride layer was thicker and the hardness gradient was smoother. Furthermore, after boriding at a low temperature of 700℃ for 8 h, a boride layer of about 5 μm formed on the NS surface. This layer was toothlike and wedged into the substrate, which made the surface layer combine well with the substrate. The phase of the boride layer was Fe2B. Research on boriding kinetics indicated that the activation energy was decreased for the treated samples.

表面机械研磨(SMAT)技术对玻璃纤维增强铝金属层板(GLARE)拉伸性能的影响

表面机械研磨(SMAT)技术是在短时间内通过振动发生器驱动大量硬度较大的小球以随机方向撞击金属材料,使得材料晶粒尤其是表面晶粒细化,从而达到增加材料强度的效果.通过对铝合金板进行SMAT处理,材料的极限强度和极限应变虽然有较小的降低,但是其屈服应力有较大幅度的增加.以SMAT处理后的铝合金板和玻璃纤维环氧树脂预浸料为原料,通过热压工艺制备成新型GLARE层合板.通过拉伸实验研究和理论计算分析了该GLARE材料的拉伸性能,发现SMAT处理的铝合金板制成的GLARE的屈服强度提升明显.

表面纳米化对低碳钢耐腐蚀性能的影响及机制

采用表面机械研磨(SMAT)处理低碳钢材料,实现表面纳米化,探讨了表面纳米化对低碳钢耐腐蚀性的影响。结果表明,表面纳米化作用下,碳含量较低的低碳钢材料表面塑性变形较强烈,表面X射线衍射峰宽化较明显;对不同碳含量低碳钢进行表面纳米化处理,碳含量越低,处理后表面粗糙度越大、耐腐蚀性能越差。

SMAT技术在油气输送管线焊后处理中的应用展望

概述了表面机械研磨技术（SMAT）的原理和研究现状，分析了SMAT技术特点，结合油气输送管线的生产及服役要求，分别就SMAT技术在改善油气输送管线焊接接头表面微观组织结构、提高油气输送管线焊接接头高低周疲劳性能、改善油气输送管线焊接接头残余应力分布和提高管线钢基体与防腐层结合能力等方面的应用进行了展望，认为SMAT技术在油气输送管线焊后处理中的应用具有广阔的前景。

不同温度和时间对SMAT黄铜基底生长ZnO纳米结构与形貌的影响

利用热氧化法,在不同氧化温度、保温时间条件下,在经过SMAT处理的Cu-Zn合金基底上生长出ZnO纳米线。采用X射线衍射、扫描电子显微镜、高分辨透射电子显微镜对样品结构、形貌进行了分析表征。结果表明:表面生长的纳米线为六方结构ZnO;氧化温度、保温时间对ZnO纳米线形貌有较大影响。总结了纳米线的生长机理。

Effect of Surface Mechanical Attrition Treatment on Corrosion Behavior of 316 Stainless Steel

The nanocrystalline microstructure of the surface of 316 stainless steel （316SS） induced by surface mechanical attrition treatment （SMAT） was determined by X-ray diffraction （XRD） and scanning electron microscopy （SEM）. The technique of hydrogen embrittlement was first used to obtain the information of the brittleness cleavage plane. The effects of SMAT and the following annealing process on the corrosion behavior of 316SS were investiga- ted by potentiodynamic polarization curves and potentiostatic critical pitting temperature measurements. The results demonstrated that the nanoerystalline layer with an average grain size of 19 nm was produced. However, there were lots of cracks on the surface, which led to the degradation in the corrosion resistance of 316SS after SMAT. Never- theless, after annealing treatment, the corrosion resistance of the nanocrystalline surface had been improved greatly. The higher the annealing temperature, the better was the corrosion resistance.

EFFECT OF NANOCRYSTALLINE AND TWIN BOUNDARIES ON CORROSION BEHAVIOR OF 316L STAINLESS STEEL USING SMAT

By means of surface mechanical attrition treatment （ SMAT）, the groin size with a diameter of aboat 60hm formed at about 20μm depth and numerous mechanical twins at about 50μm depth from the treated surface were synthesized in 316L stainless steel because of the different distributions of strain and strain rate along depth orientation. For instance the maximum strain rate reached 10^3-10^4s^-1 on the top surface. The relationship between the microsturcture and the corrosion property was studied in 0.05M H2SO4＋ 0.25M Na2SO4 aqueous solution, and the results show an extreme improvement of corrosion resistance owing to the appearance of twin boundaries and the obvious reduction in corrosion resistance attributed to the presence of nanocrystaline boundaries.

Tensile Properties of Cu with Deformation Twins Induced by SMAT

High density nano-scale deformation twins were introduced in the surface layer of Cu sample by means of surface mechanical attrition treatment （SMAT） at room temperature. The Cu sample with deformation twins shows a yield strength of about 470 MPa in tension tests. The significant strengthening may be attributed to the effective inhibition of slip dislocations by abundant twin boundaries.

Strain-induced Microstructure Refinement in a Tool Steel Subjected to Surface Mechanical Attrition Treatment

A nanostructured surface layer has been fabricated on an AISI H13 tool steel by means of surface mechanical attrition treatment （SMAT）.Strain-induced refinement processes of ferrite grains and carbide particles have been investigated by transmission electron microscopy （TEM） and scanning electron microscopy （SEM） in the SMAT surface layer.Grain refinement of ferrite is found to be dominated by dislocation activities and greatly facilitated by a large number of carbide particles at a depth 〉20 μm.The comparisons with microstructure refinement processes in other SMAT ferrite steels indicate that a larger volume fraction of carbide particles with a lower shear strength is expected to facilitate the refinement process of ferrite grains.

Thermal Stability of Nanocrystalline AZ31 Magnesium Alloy Fabricated by Surface Mechanical Attrition Treatment

A nanocrystalline layer （NL） was fabricated on the surface of AZ31 magnesium （Mg） alloy sheet by surface mechanical attrition treatment （SMAT）. The microstructure of the Mg alloy was characterized by optical microscopy, X-ray diffraction and microhardness test. The results showed that both the microstructure and microhardness of AZ31 Mg alloy sheet after SMAT revealed a gradient distribution along depth from surface to center. The thermal stability of the NL was investigated through characterizing the microstructure evolution during the post-isothermal annealing treatment within the temperature range from 150 to 250℃. The NL exhibits a certain degree of thermal stability below 150 ℃, while it disappears quickly when annealing at the temperature range of 200-250 ℃. The grain growth kinetics of the nanocrystalline of AZ31 Mg alloy induced by SMAT was investigated. The activation energy of nanocrystalline AZ31 Mg alloy was obtained with a value of 92.8 kJ/mol.

The Portevin-Le Chatelier effect of gradient nanostructured 5182 aluminum alloy by surface mechanical attrition treatment

Nanocrystalline surface layers and gradient nanostructure in 5182 aluminum alloy have been produced through surface mechanical attrition treatment(SMAT). The results indicate that the gradient nanostructure can not only improve the mechanical properties of 5182 Al alloy, but also has a certain effect on the Portevin-Le Chatelier(PLC) effect. The yield and ultimate tensile strength of 5182 Al alloy with SMAT are significantly improved combining with the decrease of fracture elongation compared with the as-received one. The PLC effect of 5182 Al alloy could be effectively postponed by the formation of gradient nanostructure after SMAT. It leads to the increase of critical strain of the PLC effect, more concentrated distribution of serrated strain, and increase of average stress amplitude in special strain range. The influence of grain size and gradient nanostructure on the PLC effect of 5182 Al alloy was also discussed in detail. Grain refinement could sharply increase the density of dislocations and hinder the movement of dislocations, which results in the decrease of moving speed of dislocations and the more concentrated distribution of solute atoms. The solute atoms would aggregate to form nano precipitates and further impede movement of dislocation. The stronger interaction between the dislocations and the nano precipitates is the main mechanism of postponed PLC effect.

Effect of surface mechanical attrition treatment of titanium using alumina balls： surface roughness, contact angle and apatite forming ability

The effect of surface mechanical attrition treatment （SMAT） of commercially pure titanium （CP-Ti） using 8 mm O alumina balls was studied. SMAT induced plastic deformation, increased the surface roughness, reduced the grain size and decreased the contact angle （from 64° to 43°） with a corresponding increase in surface energy （from 32 to 53 mJ/m2）. Untreated CP-Ti and those treateded using alumina bails for 900 s reveals no apatite growth until the 28th day of immersion whereas those treated for 1800 and 2700 s exhibit apatite growth In selective areas and the extent of growth is increased with increase in immersion time an SBF; The study reveals that SMAT using alumina balls is beneficial in imparting the desired surface Cheracteristics, provided the surface contamination is limited, which would otherwise decrease the apatite forming ability.

Effect of Surface Mechanical Attrition Treatment on Tribological Behavior of the AZ31 Alloy

By surface mechanical attrition treatment（SMAT）,a gradient nano structure（GNS） from the surface to center was generated in the AZ31 alloy sheet.The tribological behavior of AZ31 alloy with GNS was systematically investigated by using dry sliding tests,a 3D surface profile-meter and a scanning electron microscope equipped with an energy-dispersive spectrometer.The experimental results indicate that the Mg alloy with GNS exhibits better wear resistance comparing to the as-received sample,which is associated to the alteration of wear mechanism at different sliding speeds.The Mg alloy with GNS presents the wear mechanism of the abrasive wear at 0.05 m/s and the oxidative wear at 0.5 m/s,respectively.Moreover,the GNS can effectively promote the reaction between the oxygen and worn surface,which leads to a compact oxidation layer at 0.5 m/s.The effect of oxidation layer on the wear resistance of the Mg alloy was also discussed.

Low-Temperature Nitriding by Means of SMAT

The microstructure in the surface layer of iron and steel samples can be refined at the nanometer scale by means of a surface mechanical attrition treatment (SMAT) that generates repetitive severe plastic deformation to the surface layer. The subsequent nitriding kinetics of the as-treated samples with the nanostructured surface layer is greatly enhanced so that the nitriding temperatures can be reduce to 300 - 400 °C regions. This enhanced processing method demonstrates both the technological significance of nanomaterials in advancing the traditional processing techniques, and provides a new approach for selective surface reactions in solids. This article reviews the present state of the art in this field. The microstructure and properties of SMAT samples nitrided will be summarized. Further considerations of the development and applications of this new technique will also be presented.

Serrated plastic flow behavior and microstructure in a Zr-based bulk metallic glass processed by surface mechanical attrition treatment

The serrated plastic flow,microstructure and residual stress of a Zr_（55）Cu_（30）Ni_5Al_（10） bulk metallic glass（BMG）undergone surface mechanical attrition treatment（SMAT）have been investigated by a combination of compression tests with scanning electron microscopy（SEM）,high resolution transmission electron microscopy（HRTEM）and the incremental hole-drilling strain-gage method.It is found that SMAT leads to various microstructural modifications and residual stress distribution in the surface layers of the Zrbased BMG due to the mechanically-induced nanocrystallization and generation of shear bands.As a result,the BMG alloy exhibits a remarkable work-hardening like behavior and significant increase of plastic strain from less than 1%to 15%,and its plastic deformation dynamics yields a power-law distribution of shear avalanches.Based upon the analysis of the experimental results,it is indicated that this can be connected to the SMAT-induced microstructural modifications and the resulting residual compressive stress in the Zr-based BMG.

Deformation mechanism and dynamic precipitation in a Mg-7Al-2Sn alloy processed by surface mechanical attrition treatment

The effect of second phases on the deformation mechanism of as-cast, solution-treated and aged Mg-7Al-2Sn (AT72) alloys during surface mechanical attrition treatment (SMAT) was investigated. Twinning was suppressed in the alloys containing second phases, which can provide nonuniform microstructures and phase boundaries as dislocation sources. Dynamic precipitation in AT72 alloys was studied during SMAT deformation as well.Mg2Sn particles can dynamically precipitate on the surface of all AT72 alloys during SMAT process. The quantity of Mg2Sn particles in the as-cast alloy, which is determined by the initial quantity of second phases, is larger than that of T4 and T6 alloys after the SMAT process.