Fiber cladding dual channel surface plasmon resonance sensor based on S-type fiber

Fiber cladding surface plasmon resonance(SPR)sensors have few structures,and a clad SPR sensor based on S-type fiber is proposed in this paper.This new type of fiber cladding SPR sensor was formed by electrofusing an S-shaped structure on the fiber to couple the light in the fiber core to the cladding.In this paper,the effects of fiber parameters on the performance of the sensor were studied by simulation and experiment.Based on the conclusion that the smaller the core diameter is,the closer the working band of the SPR resonance is to long wavelengths,and that the geometric characteristics mean that a multimode fiber can receive the fiber cladding light from a small core diameter few-mode fiber,a dual channel SPR sensor with a double S-type fiber cascade was proposed.In the refractive index detection range of 1.333–1.385refractive index units(RIU),the resonant working band of channel I is 627.66 nm–759.78 nm,with an average sensitivity of 2540.77 nm/RIU,and the resonant working band of channel II is 518.24 nm–658.2 nm,with an average sensitivity of2691.54 nm/RIU.The processing method for the S-type fiber cladding SPR sensor is simple,effectively solving the problem of this type of SPR sensor structure and the difficult realization of a dual channel.The sensor is expected to be used in the fields of medical treatment and biological analysis.

Dual-channel fiber-optic surface plasmon resonance sensor with cascaded coaxial dual-waveguide D-type structure and microsphere structure

To address the restriction of fiber-optic surface plasmon resonance(SPR) sensors in the field of multi-sample detection, a novel dual-channel fiber-optic SPR sensor based on the cascade of coaxial dual-waveguide D-type structure and microsphere structure is proposed in this paper. The fiber sidepolishing technique converts the coaxial dual-waveguide fiber into a D-type one, and the evanescent wave in the ring core leaks, generating a D-type sensing region;the fiber optic fused ball push technology converts the coaxial dual waveguides into microspheres, and the stimulated cladding mode evanescent wave leaks, producing the microsphere sensing region. By injecting light into the coaxial dual-waveguide middle core alone, the sensor can realize single-stage sensing in the microsphere sensing area;it can also realize dual-channel sensing in the D-type sensing area and microsphere sensing area by injecting light into the ring core. The refractive index measurement ranges for the two channels are 1.333–1.365 and 1.375–1.405, respectively, with detection sensitivities of 981.56 nm/RIU and 4138 nm/RIU. The sensor combines wavelength division multiplexing and space division multiplexing technologies, presenting a novel research concept for multi-channel fiber SPR sensors.

Analysis of 17β-Estadiol from Sewage in Coastal Marine Environment by Surface Plasmon Resonance Technique

In this study, surface plasmon resonance （SPR） for monitoring 17β-eatradiol （E2） was developed. The small molecule E2 was immobilized on a CM5 sensor chip for an indirect competitive immunoassay to detect E2. The SPR response bahed on the antigen-antibody reaction was measured by injecting the sample solution into the flow system. The limitation of detection was 0.445 μg/L. The developed SPE-SPR system was applied to analyze the seawater samples. Recovery of E2 was 91.6%-93. 1%. Relative standard deviations（RSD） for the E2 assay were between 10.9%-15.1% （n = 3）. The range of determination of E2 samples from the sewage in the coastal marine environ-ment was between ND（lower than detection limit） and ca. 11.78 ng/L.

Detection of Penicillin via Surface Plasmon Resonance Biosensor

A method of using Au colloid to capture the decomposed product of penicillin, penicillamine, on a surface plasmon resonance（SPR） biosensor for the quantitative determination of penicillin was developed. Based on the de-composition of penicillin to generate penicillamine and penilloaldehyde, a high sensitive biosensor for detecting penicillin was also developed. In our experiment, it was penicillamine rather than penicillin that has been measured. This is because penicillamine contains a functional group that makes it self-assembling on Au colloid to increase the molecular weight so as to improve the surface plasmon resonance signal. On a UV-Vis spectrophotometer, a high concentration of penicilliamine-Au complex was determined, indicating that penicillamine was already well combined with Au colloid. The method, using the combination of Au colloid with penicillamine, proved to detect penicillin.

Advances in Phase Detection Technique of Surface Plasmon Resonance Biosensor

Surface plasmon resonance (SPR) sensing is an optical method based on evanescent wave.SPR biosensor can detect interaction of label-free biomolecules in real-time.With further development,it can become a research instrument in proteomics.SPR biosensor can be divided intensity measurement and phase measurement,and the latter possesses higher sensitivity than the former one.This paper attempts to summarize the SPR phase detection theory,discuss the major developments,compare the merits and deficiencies of various methods,and look forward to future prospects.

基于SPR的重金属离子检测技术研究进展

重金属离子浓度的检测对于人体健康和环境科学等领域具有重要意义。与其它离子检测方法相比,表面等离子体共振(surface plasmon resonance,SPR)技术具有无标记,灵敏度高和检测限低等优点,为重金属离子监测领域带来了新的可能性。本文综述了SPR传感技术在重金属离子检测中的应用及其技术进展。首先介绍了SPR传感的技术原理;然后在传感材料的选择以及表面修饰等方面,针对铅、汞等有害重金属离子,重点阐述了对灵敏度、线性动态范围和特异性等指标的改进;最后介绍了SPR成像传感技术在检测速度、灵敏度等方面取得的重大进展,展望了SPR技术的发展前景。

Photocatalytic seawater splitting by 2D heterostructure of ZnIn_(2)S_(4)/WO_(3) decorated with plasmonic Au for hydrogen evolution under visible light

Photocatalytic H_(2) evolution from seawater splitting presents a promising approach to tackle the fossil energy crisis and mitigate carbon emission due to the abundant source of seawater and sunlight on the earth.However,the development of efficient photocatalysts for seawater splitting remains a formidable challenge.Herein,a 2D/2D ZnIn_(2)S_(4)/WO_(3)(ZIS/WO_(3))heterojunction nanostructure is fabricated to efficiently separate the photoinduced carriers by steering electron transfer from the conduction band minimum of WO_(3) to the valence band maximum of ZIS via constructing internal electric field.Subsequently,plasmonic Au nanoparticles(NPs)as a novel photosensitizer and a reduction cocatalyst are anchored on ZIS/WO_(3) surface to further enhance the optical absorption of ZIS/WO_(3) heterojunction and accelerate the catalytic conversion.The obtained Au/ZIS/WO_(3) photocatalyst exhibits an outstanding H_(2) evolution rate of 2610.6 or 3566.3μmol g^(-1)h~(-1)from seawater splitting under visible or full-spectrum light irradiation,respectively.These rates represent an impressive increase of approximately 7.3-and 6,6-fold compared to those of ZIS under the illumination of the same light source.The unique 2D/2D structure,internal electric field,and plasmonic metal modification together boost the photocatalytic H_(2) evolution rate of Au/ZIS/WO_(3),making it even comparable to H_(2) evolution from pure water splitting.The present work sheds light on the development of efficient photocatalysts for seawater splitting.

Characteristics of Surface Plasmon Resonance Imaging lnterferometer

In recent life science research,identifying and characterizing entire biomolecular interaction networks is prerequisite to understanding cellular processes on a molecular and biophysical level.A surface plasmon resonance (SPR) imaging interferometer based on spatial phase modulation detection is presented to meet this demand.In this method,the SPR sensing chip surface is illuminated with collimated parallel light beam,and a Wollaston prism is introduced into the reflected light path to produce the interference of polarized light reflected from SPR sensing chip.Information of biomolecular interactions can be obtained by extracting the phase change from the SPR interference patterns.Using our interferometer,we made experiments on a series concentration of NaCl solutions to investigate its detection range,linearity,sensitivity and resolution.The results indicate that the SPR imaging interferometer is mainly sufficient for biomolecular interaction detection.

Surface plasmon resonance sensor based on molecularly imprinted films for the detection of pentaerythritol tetranitrate （PETN）

A novel surface plasmon resonance （SPR） sensor based on molecularly imprinted films （MIFs） was developed for the detection of pentaerythritol tetranitrate （PETN）. In this work, the thin MIFs were formed on a gold sensor chip through thermal co-polymerization of functional mono- mers （methacrylic acid, MAA） and crosslinking monomers （ethylene glycol dimethacrylate, EGD- MA） in the presence of template molecules PETN. The template molecules PETN were subsequently removed from the MIFs simply by rinsing the MIFs with a mixture of acetonitrile and acetic acid 9：1 （ v/v）, thus the recognition sites were formed for specific detection of PETN. According to the mass coverage equation, the surface coverage of removed PETN from MIFs was about 10. 8 ng/mm~. The developed SPR sensor allowed for the detection of PETN at concentration down to 10-~~ mol/L. A control experiment utilizing an analogue cyclotrimethylenetrinitramine （RDX） showed MIFs＇ good selectivity to PETN.

Improvement of the Specificity of Surface Plasmon Resonance with BSA-modified Chip

A chip was modified with bovine serum albumin （BSA）, then interaction between glutathione （GSH） immobilized on the top of BSA and glutathione-S-transferase （GST） was examined, using surface plasmon resonance （SPR）. The SPR results showed that BSA-modified chip was effective not only in binding the target proteins but also in suppressing the nonspecific binding （NSB） of proteins.

Development and Application of Time-Resolved Surface Plasmon Resonance Spectrometer

Surface plasmon resonance (SPR) sensor, an optical sensor exploiting special electromagnetic waves-surface plasmon polaritons to probe interactions between an analyte in solution and a molecular recognition element immobilized on the SPR sensor surface, has been widely used in various realms, such as investigating biomolecular interactions and binding properties, detection of biological and chemical analytes, environmental monitoring, food safety and medical diagnostics. This paper reviews the development of SPR sensors and SPR commercial instruments, and emphatically introduces the time-resolved surface plasmon resonance (TR-SPR) techniques. The excellent performances of high sensitivity and rapid detection are easily achieved with TR-SPR spectrometer, whereas the traditional SPR spectrometer cannot be accomplished. Therefore, TR-SPR spectrometer is appropriate for real time analysis of bio-recognition events and small molecular dynamics. However, only two commercial TR-SPR instruments have been exhibited at present, Thermo FT-SPR 100 and Autolab ESPRIT (SPRINGLE). Unfortunately, the high-priced instruments are not suitable for extensive applications in laboratories at present. Herein, a novel commercial TR-SPR spectrometer has been introduced in this review.

Surface plasmon-enhanced dual-band infrared absorber for VO_x-based microbolometer application

We propose a periodic structure as an extra absorption layer（i.e., absorber） based on surface plasmon resonance effects, enhancing dual-band absorption in both middle wavelength infrared（MWIR） and long wavelength infrared（LWIR）regions. Periodic gold disks are selectively patterned onto the top layer of suspended SiN/VO_2/SiN sandwich-structure.We employ the finite element method to model this structure in COMSOL Multiphysics including a proposed method of modulating the absorption peak. Simulation results show that the absorber has two absorption peaks at wavelengths λ =4.8 μm and λ = 9 μm with the absorption magnitudes more than 0.98 and 0.94 in MWIR and LWIR regions, respectively. In addition, the absorber achieves broad spectrum absorption in LWIR region, in the meanwhile, tunable dual-band absorption peaks can be achieved by variable heights of cavity as well as diameters and periodicity of disk. Thus, this designed absorber can be a good candidate for enhancing the performance of dual band uncooled infrared detector, furthermore, the manufacturing process of cavity can be easily simplified so that the reliability of such devices can be improved.

Gold Nanorods: Near-Infrared Plasmonic Photothermal Conversion and Surface Coating

In this paper, AuNRs colloids with SPRL located at ~810 nm and ~1100 nm were synthesized using an improved seed method. Based on the NIR lasers available, photothermal conversion of AuNRs were systematically studied compared with that of water. Under low power irradiation, the highest temperature is obtained when the SPRL wavelength of AuNRs is equal to the laser wavelength, and temperature of colloid increases from ~20°C to ~65°C. With increasing laser power (such as 6 W), the AuNRs colloid boils within a few minutes, and nanorods undergo a shape deformation from rod to spherical particle and even fusion, and the SPRL disappears. For further investigation, the obtained AuNRs were coated with SiO2 shell to form a core-shell nanostructure (Au@SiO2). The surface coating can be used not only in keeping the stability of AuNRs for further treatment, but also in increasing plasmonic property and biocompatibility. This work will be useful for designing plasmonic photothermal properties and further applications in nanomedicine.

Surface plasmon polaritons frequency-blue shift in low confinement factor excitation region

Surface plasmon polaritons'(SPPs')frequency blue shift is observed in finite-difference time-domain(FDTD)simulation of parallel electron excitation Au bulk structure.Comparing with cold dispersion of SPPs,an obvious frequency blue shift is obtained in low confinement region excitation simulation results.Then,according to SPPs'transverse attenuation characteristics,the excited frequency mode instead of cold dispersion corresponding frequency mode matches it.Thence,this excited mode is confirmed to be SPPs'mode.As is well known the lower the frequency,the smaller the confinement factor is and the lower the excitation efficiency,the wider the bandwidth of excited SPPs is.And considering the attenuation in whole structure,the excited surface field contains attenuation signal.In a low confinement factor region,the higher the SPPs'frequency,the higher the excitation efficiency is,while broadband frequency information obtained in attenuation signal provides high frequency information in stimulation signal.Thence,in the beam-wave interaction,as the signal oscillation time increases,the frequency of the oscillation field gradually increases.Thus,compared with cold dispersion,the frequency of excited SPP is blueshifted This hypothesis is verified by monitoring the time domain signal of excited field in low and high confinement factor regions and comparing them.Then,this frequency-blue shift is confirmed to have commonality of SPPs,which is independent of SPPs'material and structure.Finally,this frequency-blue shift is confirmed in an attenuated total reflection(ATR)experiment.Owing to frequency dependence of most of SPPs'devices,such as coherent enhancement radiation and enhancement transmission devices,the frequency-blue shift presented here is of great influence in the SPPs applications.

纳米金用于SPR传感器检测小分子的研究进展

近年来,表面等离子体共振(Surface Plasmon Resonance,SPR)技术因具有可实时、动态监测SPR芯片上分子间相互作用的优点,而广泛应用于小分子传感检测领域。信号放大是小分子SPR传感器的重要研究内容,它决定小分子能否被检出及传感器灵敏度,因此信号放大技术对其发展非常重要。纳米金因其高电子密度、介电特性及易修饰等特性而用于多种传感器的信号放大。重点介绍近5年来纳米金在小分子SPR传感器方面的应用情况,旨在为小分子SPR传感器的进一步发展提供参考依据。

群智能优化的动态基线调整在光纤SPR传感器信号处理中的应用

将谱宽(β)、基线下测量点数(m)、面积比(λ)作为最佳动态基线的选择依据,在两级适应度函数条件下,利用粒子群优化算法跟踪β、m、λ,寻找最佳组合参数下的动态基线,有效克服了传统基线选择较为随意的问题。搭建了光纤SPR测试装置,采集8种不同浓度的蔗糖标准溶液的光谱数据,将4种质心跟踪法进行实验对比。结果表明群智能优化动态基线法的预测精度和相关性均最好,可以有效提取质心参数,消除光源波动对测试结果的影响,为实现光纤SPR实时在线监测提供了一种有效途径,其共振波长拟合度为0.996 3,RMSE为1.78。另外,考察了三种质心计算参数的主导地位,结果表明:在设定相同适应度情况下,固定m方法效果最好,进而为质心参数的选择控制提供有效依据。

波长型SPR检测仪的灵敏度探讨

利用自行设计构建的可变入射角的波长型表面等离子体共振(SPR)检测仪,在不同浓度的蔗糖溶液中测定了不同入射角度(80°～66°)的共振曲线,经过处理得到共振峰位、半高宽及灵敏度随入射角和样品折射率变化的三维图像.在此基础上探讨了波长型SPR检测仪的主要参数对仪器性能的影响,从理论和实验上证明了影响灵敏度的主要因素为共振波长,并且随着共振波长的增大,检测灵敏度迅速提高.

SPR生物传感器及其应用进展

基于表面等离子体共振 (SPR)技术的光学生物传感器是进行生物分子相互作用分析的一种先进手段。与传统的超速离心、荧光法等相比 ,它具有实时检测、无需标记、耗样最少等特点 ,在药物筛选、临床诊断、食物及环境监控和膜生物学等领域中的新兴应用日益扩大 ,并且已成为生命科学和制药研究的一种标准的生物物理学工具。综述了近几年国际上生物传感器的应用进展情况 。

SPR免疫竞争法研究小分子吗啡与其抗体间作用的动力学特征

表面等离子体共振技术 ( SPR)主要应用于生物大分子相互作用的研究 ,本文采用溶液竞争法 ,测定了小分子吗啡与其抗体作用的结合常数 K1,并计算了吗啡抗体与吗啡化牛血清白蛋白的结合常数 K2 .证明了多抗对抗原的亲和力较单抗大 ,并表明大分子蛋白质的存在对抗体与待测物的结合有阻碍作用 .

表面激元共振(SPR)传感器理论分析

在基于ATR方法的SPR传感器设计和制作的工作中,为了得到更加优化的性能,对其原理进行了较为深入的分析。从表面激元波和全反射消逝波的数学模型入手,得到了共振角的数学关系及几个结论,并以金膜为例进行了计算机仿真。