We present the transmission spectra of light transmitting a metallic thin film perforated with differently shaped sub- wavelength hole arrays, which are calculated by a plane-wave-based transfer matrix method. We anal...We present the transmission spectra of light transmitting a metallic thin film perforated with differently shaped sub- wavelength hole arrays, which are calculated by a plane-wave-based transfer matrix method. We analyze the transmission peak positions and the phase-shift angles of different surface plasmon polariton (SPP) modes by using the microscopic theoretical model proposed by Haitao Liu and Philippe Lalanne [Liu Haitao, and Lalanne Philippe 2008 Nature 452 728], in which the phase shift properties of the SPPs scattered by the subwavelength hole arrays are considered. The results show that the transmission peak position and the minus phase shift angle of the SPP increase as the hole size increases. On the other hand, the effective dielectric constant of the metallic film can be deduced by the microscopic theoretical model.展开更多
With the development of nanotechnology,many new optical phenomena in nanoscale have been demonstrated.Through the coupling of optical waves and collective oscillations of free electrons in metallic nanostructures,surf...With the development of nanotechnology,many new optical phenomena in nanoscale have been demonstrated.Through the coupling of optical waves and collective oscillations of free electrons in metallic nanostructures,surface plasmon polaritons can be excited accompanying a strong near field enhancement that decays in a subwavelength scale,which have potential applications in the surface-enhanced Raman scattering,biosensor,optical communication,solar cells,and nonlinear optical frequency mixing.In the present article,we review the Green's matrix method for solving the surface plasmon resonances and near field in arbitrarily shaped nanostructures and in binary metallic nanostructures.Using this method,we design the plasmonic nanostructures whose resonances are tunable from the visible to near-infrared,study the interplay of plasmon resonances,and propose a new way to control plasmonic resonances in binary metallic nanostructures.展开更多
Metal nanostructures have been of great research interest in recent years due to their physicochemical, plasmonic properties and potential applications. A lot of work has been done on the controlled synthesis of metal...Metal nanostructures have been of great research interest in recent years due to their physicochemical, plasmonic properties and potential applications. A lot of work has been done on the controlled synthesis of metal nanostructures for various applications. In this review, we try to focus on recent developments in synthesis and applications of metal nanostructures. Firstly, we summarized different preparation methods and then briefly explained their potential applications.展开更多
Nanoscale noble metals can exhibit excellent photochemical and photophysical properties, due to surface plasmon resonance(SPR) from specifically collective electronic excitations on these metal surfaces. The SPR effec...Nanoscale noble metals can exhibit excellent photochemical and photophysical properties, due to surface plasmon resonance(SPR) from specifically collective electronic excitations on these metal surfaces. The SPR effect triggers many new surface processes, including radiation and radiationless relaxations. As for the radiation process, the SPR effect causes the significant focus of light and enormous enhancement of the local surface optical electric field, as observed in surface-enhanced Raman spectroscopy(SERS) with very high detection sensitivity(to the single-molecule level). SERS is used to identify surface species and characterize molecular structures and chemical reactions. For the radiationless process, the SPR effect can generate hot carriers, such as hot electrons and hot holes, which can induce and enhance surface chemical reactions. Here, we review our recent work and related literature on surface catalytic-coupling reactions of aromatic amines and aromatic nitro compounds on nanostructured noble metal surfaces. Such reactions are a type of novel surface plasmon-enhanced chemical reaction. They could be simultaneously characterized by SERS when the SERS signals are assigned. By combining the density functional theory(DFT) calculations and SERS experimental spectra, our results indicate the possible pathways of the surface plasmonenhanced photochemical reactions on nanostructures of noble metals. To construct a stable and sustainable system in the conversion process of the light energy to the chemical energy on nanoscale metal surfaces, it is necessary to simultaneously consider the hot electrons and the hot holes as a whole chemical reaction system.展开更多
In the last decade, the surface plasmon resonance-enhanced solar water splitting (SWS) has been actively investigated for improved hydrogen production. In this mini-review, we briefly introduce the mechanisms for pl...In the last decade, the surface plasmon resonance-enhanced solar water splitting (SWS) has been actively investigated for improved hydrogen production. In this mini-review, we briefly introduce the mechanisms for plasmon-enhanced SWS and then review some representative studies related to these mechanisms. In addition, we also briefly discuss how metal oxide geometry affects the SWS activity in combined metalsemiconductor nanostructures. Finally, we summarize the recent discoveries and proposed a future vision for plasmon-enhanced SWS with metal oxide nanostructures.展开更多
Optical fiber optrodes are attractive sensing devices due to their ability to perform point measurement in remote locations. Mostly, they are oriented to biochemical sensing, quite often supported by fluorescent and s...Optical fiber optrodes are attractive sensing devices due to their ability to perform point measurement in remote locations. Mostly, they are oriented to biochemical sensing, quite often supported by fluorescent and spectroscopic techniques, but with the refractometric approach considered as well when the objective is of high measurement performance, particularly when the focus is on enhancing the measurand resolution. In this work, we address this subject, proposing and analyzing the characteristics of a fiber optic optrode relying on plasmonic interaction. A linearly tapered optical fiber tip is covered by a double overlay: the inner one - a silver thin film and over it - a dielectric layer, with this combination allowing to achieve, at a specific wavelength range, surface plasmonic resonance (SPR) interaction sensitive Typically, the interrogation of the SPR sensing to the refractive index of the surrounding medium. structures is performed, considering spectroscopic techniques, but in principle, a far better performance can be obtained, considering the reading of the phase of the light at a specific wavelength located within the spectral plasmonic resonance. This is the approach which is studied here in the context of the proposed optical fiber optrode configuration. The analysis performed shows the combination of a silver inner layer with a dielectric titanium oxide layer with tuned thicknesses enables sensitive phase reading and allows the operation of the fiber optic optrode sensor in the third telecommunication wavelength window.展开更多
Noble metal nanostructures possess novel optical properties because of their collective electronic oscillations,known as surface plasmons(SPs).The resonance of SPs strongly depends on the material,surrounding environm...Noble metal nanostructures possess novel optical properties because of their collective electronic oscillations,known as surface plasmons(SPs).The resonance of SPs strongly depends on the material,surrounding environment,as well as the geometry of the nanostructures.Complex metal nanostructures have attracted research interest because of the degree of freedom in tailoring the plasmonic properties for more advanced applications that are unattainable by simple ones.In this review,we discuss the plasmonic properties of several typical types of complex metal nanostructures,that is,electromagnetically coupled nanoparticles(NPs),NPs/metal films,NPs/nanowires(NWs),NWs/NWs,and metal nanostructures supported or coated by dielectrics.The electromagnetic field enhancement and surface-enhanced Raman scattering applications are mainly discussed in the NPs systems where localized SPs have a key role.Propagating surface plasmon polaritons and relevant applications in plasmonic routers and logic gates using NWs network are also reviewed.The effect of dielectric substrates and surroundings of metal nanostructures to the plasmonic properties is also discussed.展开更多
Development of cost-effective, highly reproducible non-conventional fabrication techniques for anisotropic metal nanostructures is essential to realizing potential applications of plasmonic devices, photonic devices, ...Development of cost-effective, highly reproducible non-conventional fabrication techniques for anisotropic metal nanostructures is essential to realizing potential applications of plasmonic devices, photonic devices, and surface enhanced Raman scattering (SERS) phenomenon based sensors. This report highlights the fabrication of nanotriangle arrays via nanoimprinting to overcome difficulties in creating large-area SERS active substrates with uniform, reproducible Raman signals. Electron beam lithography of anisotropic nanostructures, formation of arrays of nanotriangles in silicon and the transfer of triangular shapes to polymethylmethacrylate (PMMA) sheets via nanoimprinting have not been reported elsewhere. The reuse of silicon masters offers potential for production of low cost SERS substrates. The SERS activity and reproducibility of nanotriangles are illustrated and a consistent average enhancement factor of up to -2.9 × 1011, which is the highest value reported for a patterned SERS substrate, is achieved.展开更多
基金Project supported by the National Basic Research Program of China(Grant No.2010CB23202)the National Natural Science Foundation of China(Grant No.10805006)
文摘We present the transmission spectra of light transmitting a metallic thin film perforated with differently shaped sub- wavelength hole arrays, which are calculated by a plane-wave-based transfer matrix method. We analyze the transmission peak positions and the phase-shift angles of different surface plasmon polariton (SPP) modes by using the microscopic theoretical model proposed by Haitao Liu and Philippe Lalanne [Liu Haitao, and Lalanne Philippe 2008 Nature 452 728], in which the phase shift properties of the SPPs scattered by the subwavelength hole arrays are considered. The results show that the transmission peak position and the minus phase shift angle of the SPP increase as the hole size increases. On the other hand, the effective dielectric constant of the metallic film can be deduced by the microscopic theoretical model.
基金supported by the National Natural Science Foundation of China(10874004,10674009,10821062)National Basic Research Program of China(2007CB307001)
文摘With the development of nanotechnology,many new optical phenomena in nanoscale have been demonstrated.Through the coupling of optical waves and collective oscillations of free electrons in metallic nanostructures,surface plasmon polaritons can be excited accompanying a strong near field enhancement that decays in a subwavelength scale,which have potential applications in the surface-enhanced Raman scattering,biosensor,optical communication,solar cells,and nonlinear optical frequency mixing.In the present article,we review the Green's matrix method for solving the surface plasmon resonances and near field in arbitrarily shaped nanostructures and in binary metallic nanostructures.Using this method,we design the plasmonic nanostructures whose resonances are tunable from the visible to near-infrared,study the interplay of plasmon resonances,and propose a new way to control plasmonic resonances in binary metallic nanostructures.
文摘Metal nanostructures have been of great research interest in recent years due to their physicochemical, plasmonic properties and potential applications. A lot of work has been done on the controlled synthesis of metal nanostructures for various applications. In this review, we try to focus on recent developments in synthesis and applications of metal nanostructures. Firstly, we summarized different preparation methods and then briefly explained their potential applications.
基金financially supported by the National Natural Science Foundation of China(21321062,21373172)
文摘Nanoscale noble metals can exhibit excellent photochemical and photophysical properties, due to surface plasmon resonance(SPR) from specifically collective electronic excitations on these metal surfaces. The SPR effect triggers many new surface processes, including radiation and radiationless relaxations. As for the radiation process, the SPR effect causes the significant focus of light and enormous enhancement of the local surface optical electric field, as observed in surface-enhanced Raman spectroscopy(SERS) with very high detection sensitivity(to the single-molecule level). SERS is used to identify surface species and characterize molecular structures and chemical reactions. For the radiationless process, the SPR effect can generate hot carriers, such as hot electrons and hot holes, which can induce and enhance surface chemical reactions. Here, we review our recent work and related literature on surface catalytic-coupling reactions of aromatic amines and aromatic nitro compounds on nanostructured noble metal surfaces. Such reactions are a type of novel surface plasmon-enhanced chemical reaction. They could be simultaneously characterized by SERS when the SERS signals are assigned. By combining the density functional theory(DFT) calculations and SERS experimental spectra, our results indicate the possible pathways of the surface plasmonenhanced photochemical reactions on nanostructures of noble metals. To construct a stable and sustainable system in the conversion process of the light energy to the chemical energy on nanoscale metal surfaces, it is necessary to simultaneously consider the hot electrons and the hot holes as a whole chemical reaction system.
文摘In the last decade, the surface plasmon resonance-enhanced solar water splitting (SWS) has been actively investigated for improved hydrogen production. In this mini-review, we briefly introduce the mechanisms for plasmon-enhanced SWS and then review some representative studies related to these mechanisms. In addition, we also briefly discuss how metal oxide geometry affects the SWS activity in combined metalsemiconductor nanostructures. Finally, we summarize the recent discoveries and proposed a future vision for plasmon-enhanced SWS with metal oxide nanostructures.
文摘Optical fiber optrodes are attractive sensing devices due to their ability to perform point measurement in remote locations. Mostly, they are oriented to biochemical sensing, quite often supported by fluorescent and spectroscopic techniques, but with the refractometric approach considered as well when the objective is of high measurement performance, particularly when the focus is on enhancing the measurand resolution. In this work, we address this subject, proposing and analyzing the characteristics of a fiber optic optrode relying on plasmonic interaction. A linearly tapered optical fiber tip is covered by a double overlay: the inner one - a silver thin film and over it - a dielectric layer, with this combination allowing to achieve, at a specific wavelength range, surface plasmonic resonance (SPR) interaction sensitive Typically, the interrogation of the SPR sensing to the refractive index of the surrounding medium. structures is performed, considering spectroscopic techniques, but in principle, a far better performance can be obtained, considering the reading of the phase of the light at a specific wavelength located within the spectral plasmonic resonance. This is the approach which is studied here in the context of the proposed optical fiber optrode configuration. The analysis performed shows the combination of a silver inner layer with a dielectric titanium oxide layer with tuned thicknesses enables sensitive phase reading and allows the operation of the fiber optic optrode sensor in the third telecommunication wavelength window.
基金supported by the Ministry of Science and Technology of China(Grant Nos.2009CB930700 and 2012YQ12006005)the National Natural Science Foundation of China(Grant Nos.11134013 and11227407)the Knowledge Innovative Program of the Chinese Academy of Sciences(Grant No.KJCX2-EW-W04)
文摘Noble metal nanostructures possess novel optical properties because of their collective electronic oscillations,known as surface plasmons(SPs).The resonance of SPs strongly depends on the material,surrounding environment,as well as the geometry of the nanostructures.Complex metal nanostructures have attracted research interest because of the degree of freedom in tailoring the plasmonic properties for more advanced applications that are unattainable by simple ones.In this review,we discuss the plasmonic properties of several typical types of complex metal nanostructures,that is,electromagnetically coupled nanoparticles(NPs),NPs/metal films,NPs/nanowires(NWs),NWs/NWs,and metal nanostructures supported or coated by dielectrics.The electromagnetic field enhancement and surface-enhanced Raman scattering applications are mainly discussed in the NPs systems where localized SPs have a key role.Propagating surface plasmon polaritons and relevant applications in plasmonic routers and logic gates using NWs network are also reviewed.The effect of dielectric substrates and surroundings of metal nanostructures to the plasmonic properties is also discussed.
文摘Development of cost-effective, highly reproducible non-conventional fabrication techniques for anisotropic metal nanostructures is essential to realizing potential applications of plasmonic devices, photonic devices, and surface enhanced Raman scattering (SERS) phenomenon based sensors. This report highlights the fabrication of nanotriangle arrays via nanoimprinting to overcome difficulties in creating large-area SERS active substrates with uniform, reproducible Raman signals. Electron beam lithography of anisotropic nanostructures, formation of arrays of nanotriangles in silicon and the transfer of triangular shapes to polymethylmethacrylate (PMMA) sheets via nanoimprinting have not been reported elsewhere. The reuse of silicon masters offers potential for production of low cost SERS substrates. The SERS activity and reproducibility of nanotriangles are illustrated and a consistent average enhancement factor of up to -2.9 × 1011, which is the highest value reported for a patterned SERS substrate, is achieved.