Natural slopes usually display complicated exposed rock surfaces that are characterized by complex and substantial terrain undulation and ubiquitous undesirable phenomena such as vegetation cover and rockfalls.This st...Natural slopes usually display complicated exposed rock surfaces that are characterized by complex and substantial terrain undulation and ubiquitous undesirable phenomena such as vegetation cover and rockfalls.This study presents a systematic outcrop research of fracture pattern variations in a complicated rock slope,and the qualitative and quantitative study of the complex phenomena impact on threedimensional(3D)discrete fracture network(DFN)modeling.As the studies of the outcrop fracture pattern have been so far focused on local variations,thus,we put forward a statistical analysis of global variations.The entire outcrop is partitioned into several subzones,and the subzone-scale variability of fracture geometric properties is analyzed(including the orientation,the density,and the trace length).The results reveal significant variations in fracture characteristics(such as the concentrative degree,the average orientation,the density,and the trace length)among different subzones.Moreover,the density of fracture sets,which is approximately parallel to the slope surface,exhibits a notably higher value compared to other fracture sets across all subzones.To improve the accuracy of the DFN modeling,the effects of three common phenomena resulting from vegetation and rockfalls are qualitatively analyzed and the corresponding quantitative data processing solutions are proposed.Subsequently,the 3D fracture geometric parameters are determined for different areas of the high-steep rock slope in terms of the subzone dimensions.The results show significant variations in the same set of 3D fracture parameters across different regions with density differing by up to tenfold and mean trace length exhibiting differences of 3e4 times.The study results present precise geological structural information,improve modeling accuracy,and provide practical solutions for addressing complex outcrop issues.展开更多
The surface undulating shapes of rock joints have been described qualitatively or experimental quantitatively for a long time. The non determined describing method can not fit quantitative evaluation of mechani...The surface undulating shapes of rock joints have been described qualitatively or experimental quantitatively for a long time. The non determined describing method can not fit quantitative evaluation of mechanical parameters of rock joints in engineering. In this paper, relative amplitude ( R A) is chosen as a quantitative describing index of surface measurement of 1 023 surface undulating curves which conducted by profile curve device(PCD). We discuss the nonuniformity,anisotropy and unhomogeneity of surface undulating shapes of joints. A new method that analyzes the complexity of surface undulating shapes of rock joints directional statistically in various rock joints is also put forward.展开更多
There are a few studies on the use of ferro-nanofluids for enhanced oil recovery,despite their magnetic properties;hence,it is needed to study the adsorption of iron oxide(Fe2 O3 and Fe3 O4) nanoparticles(NPs) on rock...There are a few studies on the use of ferro-nanofluids for enhanced oil recovery,despite their magnetic properties;hence,it is needed to study the adsorption of iron oxide(Fe2 O3 and Fe3 O4) nanoparticles(NPs) on rock surfaces.This is important as the colloidal transport of NPs through the reservoir is subject to particle adsorption on the rock surface.Molecular dynamics simulation was used to determine the interfacial energy(strength) and adsorption of Fe2 O3 and Fe3 O4 nanofluids infused in reservoir sandstones.Fourier transform infrared spectroscopy and X-ray photon spectroscopy(XPS) were used to monitor interaction of silicate species with Fe2 O3 and Fe3 O4.The spectral changes show the variation of dominating silicate anions in the solution.Also,the XPS peaks for Si,C and Fe at 190,285 and 700 eV,respectively,are less distinct in the spectra of sandstone aged in the Fe3 O4 nanofluid,suggesting the intense adsorption of the Fe3 O4 with the crude oil.The measured IFT for brine/oil,Fe2 O3/oil and Fe3 O4/oil are 40,36.17 and 31 mN/m,respectively.Fe3 O4 infused with reservoir sandstone exhibits a higher silicate sorption capacity than Fe2 O3,due to their larger number of active surface sites and saturation magnetization,which accounts for the effectiveness of Fe3 O4 in reducing IFT.展开更多
The geochemistry of natural waters in the Changtang Nature Reserve,northern Tibet,can help us understand the geology of catchments,and provide additional insight in surface processes that influence water chemistry suc...The geochemistry of natural waters in the Changtang Nature Reserve,northern Tibet,can help us understand the geology of catchments,and provide additional insight in surface processes that influence water chemistry such as rock weathering on the Qinghai–Tibet Plateau.However,severe natural conditions are responsible for a lack of scientific data for this area.This study represents the first investigation of the chemical composition of surface waters and weathering effects in two lake basins in the reserve(Lake Dogaicoring Qiangco and Lake Longwei Co).The results indicate that total dissolved solids(TDS)in the two lakes are significantly higher than in other gauged lakes on the Qinghai–Tibet Plateau,reaching 20–40 g/L,and that TDS of the tectonic lake(Lake Dogaicoring Qiangco)is significantly higher than that of the barrier lake(Lake Longwei Co).Na+and Cl-are the dominant ions in the lake waters as well as in the glacier-fed lake inflows,with chemical compositions mainly affected by halite weathering.In contrast,ion contents of inflowing rivers fed by nearby runoff are lower and concentrations of dominant ions are not significant.Evaporite,silicate,and carbonate weathering has relatively equal effects on these rivers.Due to their limited scope,small streams near the lakes are less affected by carbonate than by silicate weathering.展开更多
基金supported by the National Key Research and Development Program of China(Grant No.2022YFC3080200)the National Natural Science Foundation of China(Grant No.42022053)the China Postdoctoral Science Foundation(Grant No.2023M731264).
文摘Natural slopes usually display complicated exposed rock surfaces that are characterized by complex and substantial terrain undulation and ubiquitous undesirable phenomena such as vegetation cover and rockfalls.This study presents a systematic outcrop research of fracture pattern variations in a complicated rock slope,and the qualitative and quantitative study of the complex phenomena impact on threedimensional(3D)discrete fracture network(DFN)modeling.As the studies of the outcrop fracture pattern have been so far focused on local variations,thus,we put forward a statistical analysis of global variations.The entire outcrop is partitioned into several subzones,and the subzone-scale variability of fracture geometric properties is analyzed(including the orientation,the density,and the trace length).The results reveal significant variations in fracture characteristics(such as the concentrative degree,the average orientation,the density,and the trace length)among different subzones.Moreover,the density of fracture sets,which is approximately parallel to the slope surface,exhibits a notably higher value compared to other fracture sets across all subzones.To improve the accuracy of the DFN modeling,the effects of three common phenomena resulting from vegetation and rockfalls are qualitatively analyzed and the corresponding quantitative data processing solutions are proposed.Subsequently,the 3D fracture geometric parameters are determined for different areas of the high-steep rock slope in terms of the subzone dimensions.The results show significant variations in the same set of 3D fracture parameters across different regions with density differing by up to tenfold and mean trace length exhibiting differences of 3e4 times.The study results present precise geological structural information,improve modeling accuracy,and provide practical solutions for addressing complex outcrop issues.
文摘The surface undulating shapes of rock joints have been described qualitatively or experimental quantitatively for a long time. The non determined describing method can not fit quantitative evaluation of mechanical parameters of rock joints in engineering. In this paper, relative amplitude ( R A) is chosen as a quantitative describing index of surface measurement of 1 023 surface undulating curves which conducted by profile curve device(PCD). We discuss the nonuniformity,anisotropy and unhomogeneity of surface undulating shapes of joints. A new method that analyzes the complexity of surface undulating shapes of rock joints directional statistically in various rock joints is also put forward.
文摘There are a few studies on the use of ferro-nanofluids for enhanced oil recovery,despite their magnetic properties;hence,it is needed to study the adsorption of iron oxide(Fe2 O3 and Fe3 O4) nanoparticles(NPs) on rock surfaces.This is important as the colloidal transport of NPs through the reservoir is subject to particle adsorption on the rock surface.Molecular dynamics simulation was used to determine the interfacial energy(strength) and adsorption of Fe2 O3 and Fe3 O4 nanofluids infused in reservoir sandstones.Fourier transform infrared spectroscopy and X-ray photon spectroscopy(XPS) were used to monitor interaction of silicate species with Fe2 O3 and Fe3 O4.The spectral changes show the variation of dominating silicate anions in the solution.Also,the XPS peaks for Si,C and Fe at 190,285 and 700 eV,respectively,are less distinct in the spectra of sandstone aged in the Fe3 O4 nanofluid,suggesting the intense adsorption of the Fe3 O4 with the crude oil.The measured IFT for brine/oil,Fe2 O3/oil and Fe3 O4/oil are 40,36.17 and 31 mN/m,respectively.Fe3 O4 infused with reservoir sandstone exhibits a higher silicate sorption capacity than Fe2 O3,due to their larger number of active surface sites and saturation magnetization,which accounts for the effectiveness of Fe3 O4 in reducing IFT.
基金supported by the National Natural Science Foundation of China(Nos.41190080,41371058,and 41201035)the National Science Foundation of China(No.2012FY111400)the Chinese Academy of Sciences Strategic Leading Science and Technology Projects(No.XDB05030400)
文摘The geochemistry of natural waters in the Changtang Nature Reserve,northern Tibet,can help us understand the geology of catchments,and provide additional insight in surface processes that influence water chemistry such as rock weathering on the Qinghai–Tibet Plateau.However,severe natural conditions are responsible for a lack of scientific data for this area.This study represents the first investigation of the chemical composition of surface waters and weathering effects in two lake basins in the reserve(Lake Dogaicoring Qiangco and Lake Longwei Co).The results indicate that total dissolved solids(TDS)in the two lakes are significantly higher than in other gauged lakes on the Qinghai–Tibet Plateau,reaching 20–40 g/L,and that TDS of the tectonic lake(Lake Dogaicoring Qiangco)is significantly higher than that of the barrier lake(Lake Longwei Co).Na+and Cl-are the dominant ions in the lake waters as well as in the glacier-fed lake inflows,with chemical compositions mainly affected by halite weathering.In contrast,ion contents of inflowing rivers fed by nearby runoff are lower and concentrations of dominant ions are not significant.Evaporite,silicate,and carbonate weathering has relatively equal effects on these rivers.Due to their limited scope,small streams near the lakes are less affected by carbonate than by silicate weathering.