Room temperature low threshold lasing of green GaNbased vertical cavity surface emitting laser(VCSEL)was demonstrated under continuous wave(CW)operation.By using self-formed InGaN quantum dots(QDs)as the active region...Room temperature low threshold lasing of green GaNbased vertical cavity surface emitting laser(VCSEL)was demonstrated under continuous wave(CW)operation.By using self-formed InGaN quantum dots(QDs)as the active region,the VCSEL emitting at 524.0 nm has a threshold current density of 51.97 A cm^(-2),the lowest ever reported.The QD epitaxial wafer featured with a high IQE of 69.94%and theδ-function-like density of states plays an important role in achieving low threshold current.Besides,a short cavity of the device(~4.0λ)is vital to enhance the spontaneous emission coupling factor to 0.094,increase the gain coefficient factor,and decrease the optical loss.To improve heat dissipation,AlN layer was used as the current confinement layer and electroplated copper plate was used to replace metal bonding.The results provide important guidance to achieving high performance GaN-based VCSELs.展开更多
A three-dimensional electrical-thermal coupling model based on the finite element method is applied to study thermal properties of implant-defined vertical cavity surface emitting laser (VCSEL) arrays. Several param...A three-dimensional electrical-thermal coupling model based on the finite element method is applied to study thermal properties of implant-defined vertical cavity surface emitting laser (VCSEL) arrays. Several parameters including inter-element spacing, scales, injected current density and substrate temperature are considered. The actual temperatures obtained through experiment are in excellent agreement with the calculated results, which proves the accuracy of the model. Due to the serious thermal problem, it is essential to design arrays of low self-heating. The analysis can provide a foundation for designing VCSEL arrays in the future.展开更多
Far-field properties dependent on array scale, separation, element width and emitted wavelength are system atically analyzed theoretically and experimentally. An array model based on the finite-difference method is es...Far-field properties dependent on array scale, separation, element width and emitted wavelength are system atically analyzed theoretically and experimentally. An array model based on the finite-difference method is established to simulate the far-field profile of the coherent arrays. Some important conclusions are obtained. To achieve a higher quality beam, it is necessary to decrease separation between elements, or to increase the element width. Higher brightness can be achieved in the array with larger scale. Emitted wavelength also has an influence on the far-field profile. These analyses can be extended to the future design of coherent vertical cavity surface emitting laser arrays.展开更多
It is important to determine quantitatively the internal carrier loss arising from heating and barrier height variation in a vertical-cavity surface-emitting quantum well laser (VCSEL). However, it is generally diff...It is important to determine quantitatively the internal carrier loss arising from heating and barrier height variation in a vertical-cavity surface-emitting quantum well laser (VCSEL). However, it is generally difficult to realize this goal using purely theoretical formulas due to difficulty h, deriving the parameters relat^i~g to the quantum well structure. In this paper, we describe an efl:icient approach to characterizing and calculating the carrier loss due to the heating and the barrier height change in the VCSEL. In the method, the thermal carrier loss mechanism is combined with gain measurement and calculation. The carrier loss is re-characterized in a calculable form by constructing the threshold current and gain detuning-related loss current using the measured gain data and then substituting them for the quantum well-related parameters in the formula. The result can be expressed as a product of an exponential weight factor linked to the barrier height change and the difference between the threshold current and gain detuning-related loss current. The gain variation at cavity frequency due to thermal carrier loss and gain detuning processes is measured by using an AllnGaAs-AIGaAs VCSEL structure. This work provides a useful approach to analysing threshold and loss properties of the VCSEL, particularly, gain offset design for high temperature operation of VCSELs.展开更多
The polarization of traditional photonic crystal(PC) vertical cavity surface emitting laser(VCSEL) is uncontrollable,resulting in the bit error increasing easily.Elliptical hole photonic crystal can control the tr...The polarization of traditional photonic crystal(PC) vertical cavity surface emitting laser(VCSEL) is uncontrollable,resulting in the bit error increasing easily.Elliptical hole photonic crystal can control the transverse mode and polarization of VCSEL efficiently.We analyze the far field divergence angle,and birefringence of elliptical hole PC VCSEL.When the ratio of minor axis to major axis b/a = 0.7,the PC VCSEL can obtain single mode and polarization.According to the simulation results,we fabricate the device successfully.The output power is 1.7 mW,the far field divergence angle is less than 10°,and the side mode suppression ratio is over 30 dB.The output power in the Y direction is 20 times that in the X direction.展开更多
Beam steering in implant defined coherently coupled vertical cavity surface emitting laser (VCSEL) arrays is simulated using the FDTD solution software. Angular deflection dependent on relative phase differences amo...Beam steering in implant defined coherently coupled vertical cavity surface emitting laser (VCSEL) arrays is simulated using the FDTD solution software. Angular deflection dependent on relative phase differences among elements, inter-element spacing, element size and emitted wavelength is analyzed detailedly and systematically. We design and fabricate 1×2 implant defined VCSEL arrays for optimum beam steering performance. Electroni- cally controlled beam steering with a maximum deflection angle of 1.6° is successfully achieved in the 1 × 2 VCSEL arrays. The percentage of the power in the central lobe is above 39% when steering. The results show that the steering is controllable. Compared with other beam steering methods, the fabrication process is simple and of low cost.展开更多
In this work, the characteristics of the photonic crystal tunneling injection quantum dot vertical cavity surface emitting lasers(Ph C-TIQD-VCSEL) are studied through analyzing a modified modulation transfer functio...In this work, the characteristics of the photonic crystal tunneling injection quantum dot vertical cavity surface emitting lasers(Ph C-TIQD-VCSEL) are studied through analyzing a modified modulation transfer function. The function is based on the rate equations describing the carrier dynamics at different energy levels of dot and injector well. Although the frequency modulation response component associated with carrier dynamics in wetting layer(WL) and at excited state(ES) levels of dots limits the total bandwidth in conventional QD-VCSEL, our study shows that it can be compensated for by electron tunneling from the injector well into the dot in TIQD structure. Carrier back tunneling time is one of the most important parameters, and by increment of that, the bias current dependence of the total bandwidth will be insignificant. It is proved that at high bias current, the limitation of the WL-ES level plays an important role in reducing the total bandwidth and results in rollovers on 3-d B bandwidth-I curves. In such a way, for smaller air hole diameter of photonic crystal, the effect of this reduction is stronger.展开更多
Global navigation satellite system(GNSS)technique has irreplaceable advantages in the continuous monitoring of surface deformation.Reducing noise to improve the signal-to-noise ratio(SNR)and extract the concerned sign...Global navigation satellite system(GNSS)technique has irreplaceable advantages in the continuous monitoring of surface deformation.Reducing noise to improve the signal-to-noise ratio(SNR)and extract the concerned signals is of great significance.As an improved algorithm of empirical mode decomposition(EMD),complete ensemble empirical mode decomposition with adaptive noise(CEEMDAN)algorithm has better signal processing ability.Using the CEEMDAN algorithm,the height time series of 29GNSS stations in Chinese mainland were analyzed,and good denoising effects and extraction from periodic signals were achieved.The numerical results showed that the annual signal obtained with the CEEMDAN algorithm was significantly based on Lomb_Scargle spectrum analysis,and large differences in the long-term signals were found between the stations at different locations in Chinese mainland.With respect to data denoising,compared with the EMD and wavelet denoising algorithms,the CEEMDAN algorithm respectively improved the SNR by 29.35% and 36.54%,increased the correlation coefficient by 8.67% and 11.96%,and reduced root mean square error(RMSE)by 44.68% and 43.48%,indicating that the CEEMDAN algorithm had better denoising behavior than the other two algorithms.In addition,the results demonstrated that different denoising methods had little influence on estimating the annual vertical deformation velocity.The extraction of periodic signals showed that more components were retained by using the CEEMDAN algorithm than the EMD algorithm,which indicated that the CEEMDAN algorithm had advantages over frequency aliasing.In conclusion,the CEEMDAN algorithm was recommended for processing the GNSS height time series to analyze the vertical deformation due to its excellent features of denoising and the extraction of periodic signals.展开更多
A probability density function of surface elevation is obtained through improvement of the method introduced by Cieslikiewicz who employed the maximum entropy principle to investigate the surface elevation distributio...A probability density function of surface elevation is obtained through improvement of the method introduced by Cieslikiewicz who employed the maximum entropy principle to investigate the surface elevation distribution. The density function can be easily extended to higher order according to demand and is non-negative everywhere, satisfying the basic behavior of the probability, Moreover because the distribution is derived without any assumption about sea waves, it is found from comparison with several accepted distributions that the new form of distribution can be applied in a wider range of wave conditions, In addition, the density function can be used to fit some observed distributions of surface vertical acceleration although something remains unsolved.展开更多
Several remotely sensed sea surface salinity(SSS) retrievals with various resolutions from the soil moisture and ocean salinity(SMOS) and Aquarius/SAC-D missions are applied as inputs for retrieving salinity profi...Several remotely sensed sea surface salinity(SSS) retrievals with various resolutions from the soil moisture and ocean salinity(SMOS) and Aquarius/SAC-D missions are applied as inputs for retrieving salinity profiles(S) using multilinear regressions. The performance is evaluated using a total root mean square(RMS) error, different error sources, and the feature resolutions of the retrieved S fields. In the mixed layer of the salinity, the SSS-S regression coefficients are uniformly large. The SSS inputs yield smaller RMS errors in the retrieved S with respect to Argo profiles as their spatial or temporal resolution decreases. The projected SSS errors are dominant, and the retrieved S values are more accurate than those of climatology in the tropics except for the tropical Atlantic, where the regression errors are abnormally large. Below that level, because of the influence of a sea level anomaly, the areas of high-accuracy S values shift to higher latitudes except in the high-latitude southern oceans, where the projected SSS errors are abnormally large. A spectral analysis suggests that the CATDS-0.25° results are much noisier and that the BEC-L4-0.25° results are much smoother than those of the other retrievals. Aquarius-CAP-1° generates the smallest RMS errors, and Aquarius-V2-1° performs well in depicting large-scale phenomena. BEC-L3-0.25°,which has small RMS errors and remarkable mesoscale energy, is the best fit for portraying mesoscale features in the SSS and retrieved S fields. The current priority for retrieving S is to improve the reliability of satellite SSS especially at middle and high latitudes, by developing advanced algorithms, combining both sensors, or weighing between accuracy and resolutions.展开更多
In this paper, stable single-mode operation at high temperatures is produced by the surface-relief-integrated vertical cavity surface emitting laser(VCSEL). The gain-cavity mode detuning technique is employed to rea...In this paper, stable single-mode operation at high temperatures is produced by the surface-relief-integrated vertical cavity surface emitting laser(VCSEL). The gain-cavity mode detuning technique is employed to realize high operating temperatures for the VCSEL. The surface relief is etched in the centre of the top side as a mode discriminator for the fundamental mode output, and the threshold current minimum is 1.94 mA at high temperatures by the gain-cavity mode detuning technique. Maximum single-fundamental-mode output power of 0.45 mW at 80℃ is obtained, and the side mode suppression ratios(SMSRs) are more than 30 dB with increasing temperature and current, respectively.展开更多
The characteristics of the photonic crystal vertical cavity surface emitting lasers(PhC-VCSELs) were investigated by using the full vector finite-difference time-domain(FDTD) method through the transverse mode los...The characteristics of the photonic crystal vertical cavity surface emitting lasers(PhC-VCSELs) were investigated by using the full vector finite-difference time-domain(FDTD) method through the transverse mode loss analysis. PhC-VCSELs with different photonic crystal structures were analyzed theoretically and experimentally. Through combining the dual mode confinement of oxide aperture and seven-point-defect photonic crystal structure, the PhC-VCSELs with low threshold current of 0.9 mA and maximum output power of 3.1 mW operating in single fundamental mode were demonstrated. Mode loss analysis method was proven as a reliable and useful way to analyze and optimize the PhC-VCSELs.展开更多
A global eddy-permitting ocean-ice coupled model with a horizontal resolution of 0.25° by 0.25° is estab- lished on the basis of Modular Ocean Model version 4 (MOM4) and Sea Ice Simulator (SIS). Simulati...A global eddy-permitting ocean-ice coupled model with a horizontal resolution of 0.25° by 0.25° is estab- lished on the basis of Modular Ocean Model version 4 (MOM4) and Sea Ice Simulator (SIS). Simulation results are compared with those of an intermediate resolution ocean-ice coupled model with a horizontal resolution of about 1° by 1°. The results show that the simulated ocean temperature, ocean current and sea ice concentration from the eddy-permitting model are better than those from the intermediate resolu- tion model. However, both the two models have the common problem of ocean general circulation models (OGCMs) that the majority of the simulated summer sea surface temperature (SST) is too warm while the majority of the simulated subsurface summer temperature is too cold. Further numerical experiments show that this problem can be alleviated by incorporating the non-breaking surface wave-induced vertical mixing into the vertical mixing scheme for both eddy-permitting and intermediate resolution models.展开更多
As the basis of flight behavior,the initiation process of insect flight is accompanied by a transition from crawling mode to flight mode,and is clearly important and complex.Insects take flight from a vertical surface...As the basis of flight behavior,the initiation process of insect flight is accompanied by a transition from crawling mode to flight mode,and is clearly important and complex.Insects take flight from a vertical surface,which is more difficult than takeoff from a horizontal plane,but greatly expands the space of activity and provides us with an excellent bionic model.In this study,the entire process of a butterfly alighting from a vertical surface was captured by a high-speed camera system,and the movements of its body and wings were accurately measured for the first time.After analyzing the movement of the center of mass,it was found that before initiation,the acceleration perpendicular to the wall was much greater than the acceleration parallel to the wall,reflecting the positive effects of the legs during the initiation process.However,the angular velocity of the body showed that this process was unstable,and was further destabilized as the flight speed increased.Comparing the angles between the body and the vertical direction before and after leaving the wall,a significant change in body posture was found,evidencing the action of aerodynamic forces on the body.The movement of the wings was further analyzed to obtain the laws of the three Euler angles,thus revealing the locomotory mechanism of the butterfly taking off from the vertical surface.展开更多
For operation and manipulation with nanometric positioning precision,an integrated micro nano-positioning xy-stage is developed,which is mainly composed of a silicon-based xy-stage,comb-driven actuator and displacemen...For operation and manipulation with nanometric positioning precision,an integrated micro nano-positioning xy-stage is developed,which is mainly composed of a silicon-based xy-stage,comb-driven actuator and displacement sensor.The high-aspect-ratio comb-driven xy-stage is achieved by deep reactive ion etching (DRIE) in both sides of wafer.The displacement sensor is mainly composed of four vertical sidewall surface piezoresistor connected to form a full Wheatstone bridge.A simple vertical sidewall surface piezoresistor process which improves on the basis of the conventional surface piezoresistor technique is proposed.The experimental results verify the integrated micro nano-positioning xy-stage including the vertical sidewall surface piezoresistor technique.The sensitivity of the fabricated piezoresistive sensors is better than 1.17 mV/μm without amplification and the linearity is better than 0.814%.Under 30 V driving voltage,a ±10 μm single-axis displacement is measured without crosstalk.The displacement resolution of the micro xy-stage is better than 10.8 nm.展开更多
Measurements of surface O3 and carbon monoxide(CO) were made from September 2009 to August 2011 at Dangxiong(30.48°N, 91.10°E, 4187 m a.s.l.), a remote highland site in a southern valley of the Nyainq...Measurements of surface O3 and carbon monoxide(CO) were made from September 2009 to August 2011 at Dangxiong(30.48°N, 91.10°E, 4187 m a.s.l.), a remote highland site in a southern valley of the Nyainqêntanglha Mountains in the Tibetan Plateau, China. The monthly mean O3 mixing ratio ranged from 29.1 to 51.4 ppb, with an average of 38.5 ppb, and the maximum value was observed in May. The average diurnal cycle of O3 concentration showed a minimum in early morning and a maximum in the afternoon, with a broader "high platform" from the late morning to the late afternoon, and resembled that of surface wind speed. The concentration of surface O3 was highly significantly correlated with tropospheric column O3 over the regions surrounding Dangxiong and with that of surface O3 observed at a site north of the Nyainqêntanglha Mountains, suggesting a good regional representativeness of surface O3 at Dangxiong. In the afternoon when stronger winds blew, surface air showed distinct features of free-atmospheric air, with higher O3, lower CO, and lower relative humidity(RH). The negative O3-CO and O3-RH correlations in most months indicate a significant influence of air masses from the free troposphere. Trajectory analysis suggests that air masses originating from the south of the site make a negative net contribution to surface O3 and a positive contribution to CO and humidity, and those from the northwest sector contribute conversely to the respective quantities.展开更多
It is known that each compact connected orient able 3-manifold M with boundary admits an H’-splitting H1∪FH2,where F is a compact connected orientable surface properly embedded in M and splits M into two handlbodies...It is known that each compact connected orient able 3-manifold M with boundary admits an H’-splitting H1∪FH2,where F is a compact connected orientable surface properly embedded in M and splits M into two handlbodies H_(1) and H_(2).In this paper,we show that a non-completely L-reducible and minimal H’-splitting surface for a compact connected irreducible orientable anannular Seifert 3-manifold with boundary is horizontal,and give a necessary and sufficient condition for an amalgamation of two compact connected orientable 3-manifolds along a compact connected surface to be a Seifert manifold with boundary,and describe a characteristic of some H’-splittings to denote a Seifert 3-manifold with boundary.For a compact connected orientable Seifert manifold M with a semi-bundle structure M_(1)∪_(F)M_(2),we give an upper bound of the genus of the base surface.展开更多
基金This work was supported by the National Natural Science Foundation of China(Nos.U21A20493,62104204,and 62234011)the National Key Research and Development Program of China(No.2017YFE0131500)the President’s Foundation of Xiamen University(No.20720220108).
文摘Room temperature low threshold lasing of green GaNbased vertical cavity surface emitting laser(VCSEL)was demonstrated under continuous wave(CW)operation.By using self-formed InGaN quantum dots(QDs)as the active region,the VCSEL emitting at 524.0 nm has a threshold current density of 51.97 A cm^(-2),the lowest ever reported.The QD epitaxial wafer featured with a high IQE of 69.94%and theδ-function-like density of states plays an important role in achieving low threshold current.Besides,a short cavity of the device(~4.0λ)is vital to enhance the spontaneous emission coupling factor to 0.094,increase the gain coefficient factor,and decrease the optical loss.To improve heat dissipation,AlN layer was used as the current confinement layer and electroplated copper plate was used to replace metal bonding.The results provide important guidance to achieving high performance GaN-based VCSELs.
基金Supported by the National Natural Science Foundation of China under Grant Nos 61376049,61076044,61107026,61204011and U1037602the Natural Science Foundation of Beijing under Grant Nos 4132006,4102003,and 4112006+1 种基金the Scientific Research Fund Project of Municipal Education Commission of Beijing under Grant No KM201210005004the Specialized Research Fund for the Doctoral Program of Higher Education under Grant No 20121103110018
文摘A three-dimensional electrical-thermal coupling model based on the finite element method is applied to study thermal properties of implant-defined vertical cavity surface emitting laser (VCSEL) arrays. Several parameters including inter-element spacing, scales, injected current density and substrate temperature are considered. The actual temperatures obtained through experiment are in excellent agreement with the calculated results, which proves the accuracy of the model. Due to the serious thermal problem, it is essential to design arrays of low self-heating. The analysis can provide a foundation for designing VCSEL arrays in the future.
基金Supported by the National Natural Science Foundation of China under Grant Nos 61376049,61076044,61107026 and 61204011the Scientific Research Fund Project of Municipal Education Commission of Beijing under Grant No PXM2014-014204-07-000018
文摘Far-field properties dependent on array scale, separation, element width and emitted wavelength are system atically analyzed theoretically and experimentally. An array model based on the finite-difference method is established to simulate the far-field profile of the coherent arrays. Some important conclusions are obtained. To achieve a higher quality beam, it is necessary to decrease separation between elements, or to increase the element width. Higher brightness can be achieved in the array with larger scale. Emitted wavelength also has an influence on the far-field profile. These analyses can be extended to the future design of coherent vertical cavity surface emitting laser arrays.
文摘It is important to determine quantitatively the internal carrier loss arising from heating and barrier height variation in a vertical-cavity surface-emitting quantum well laser (VCSEL). However, it is generally difficult to realize this goal using purely theoretical formulas due to difficulty h, deriving the parameters relat^i~g to the quantum well structure. In this paper, we describe an efl:icient approach to characterizing and calculating the carrier loss due to the heating and the barrier height change in the VCSEL. In the method, the thermal carrier loss mechanism is combined with gain measurement and calculation. The carrier loss is re-characterized in a calculable form by constructing the threshold current and gain detuning-related loss current using the measured gain data and then substituting them for the quantum well-related parameters in the formula. The result can be expressed as a product of an exponential weight factor linked to the barrier height change and the difference between the threshold current and gain detuning-related loss current. The gain variation at cavity frequency due to thermal carrier loss and gain detuning processes is measured by using an AllnGaAs-AIGaAs VCSEL structure. This work provides a useful approach to analysing threshold and loss properties of the VCSEL, particularly, gain offset design for high temperature operation of VCSELs.
基金Project supported by the National High Technology Research and Development Program of China (Grant No. 2008AA03Z402)the Beijing Municipal Natural Science Foundation,China (Grant Nos. 4092007,4112006,4102003,and 4132006)+1 种基金the National Natural Science Foundation of China (Grant Nos. 61076044,61036002,61036009,and 60978067)the Doctoral Fund of the Ministry of Education of China (Grant No. 20121103110018)
文摘The polarization of traditional photonic crystal(PC) vertical cavity surface emitting laser(VCSEL) is uncontrollable,resulting in the bit error increasing easily.Elliptical hole photonic crystal can control the transverse mode and polarization of VCSEL efficiently.We analyze the far field divergence angle,and birefringence of elliptical hole PC VCSEL.When the ratio of minor axis to major axis b/a = 0.7,the PC VCSEL can obtain single mode and polarization.According to the simulation results,we fabricate the device successfully.The output power is 1.7 mW,the far field divergence angle is less than 10°,and the side mode suppression ratio is over 30 dB.The output power in the Y direction is 20 times that in the X direction.
基金Supported by the‘Supporting First Action’Joint Foundation for Outstanding Postdoctoral Program under Grant Nos Y7YBSH0001 and Y7BSH14001the National Natural Science Foundation of China under Grant No 61434006the National Key Basic Research Program of China under Grant No 2017YFB0102302
文摘Beam steering in implant defined coherently coupled vertical cavity surface emitting laser (VCSEL) arrays is simulated using the FDTD solution software. Angular deflection dependent on relative phase differences among elements, inter-element spacing, element size and emitted wavelength is analyzed detailedly and systematically. We design and fabricate 1×2 implant defined VCSEL arrays for optimum beam steering performance. Electroni- cally controlled beam steering with a maximum deflection angle of 1.6° is successfully achieved in the 1 × 2 VCSEL arrays. The percentage of the power in the central lobe is above 39% when steering. The results show that the steering is controllable. Compared with other beam steering methods, the fabrication process is simple and of low cost.
文摘In this work, the characteristics of the photonic crystal tunneling injection quantum dot vertical cavity surface emitting lasers(Ph C-TIQD-VCSEL) are studied through analyzing a modified modulation transfer function. The function is based on the rate equations describing the carrier dynamics at different energy levels of dot and injector well. Although the frequency modulation response component associated with carrier dynamics in wetting layer(WL) and at excited state(ES) levels of dots limits the total bandwidth in conventional QD-VCSEL, our study shows that it can be compensated for by electron tunneling from the injector well into the dot in TIQD structure. Carrier back tunneling time is one of the most important parameters, and by increment of that, the bias current dependence of the total bandwidth will be insignificant. It is proved that at high bias current, the limitation of the WL-ES level plays an important role in reducing the total bandwidth and results in rollovers on 3-d B bandwidth-I curves. In such a way, for smaller air hole diameter of photonic crystal, the effect of this reduction is stronger.
基金supported by the National Natural Science Foundation of China(Grant No.42192535,42174012,42174101,41974023)the Open Fund of Hubei Luojia Laboratory(Grant No.S22H640201)。
文摘Global navigation satellite system(GNSS)technique has irreplaceable advantages in the continuous monitoring of surface deformation.Reducing noise to improve the signal-to-noise ratio(SNR)and extract the concerned signals is of great significance.As an improved algorithm of empirical mode decomposition(EMD),complete ensemble empirical mode decomposition with adaptive noise(CEEMDAN)algorithm has better signal processing ability.Using the CEEMDAN algorithm,the height time series of 29GNSS stations in Chinese mainland were analyzed,and good denoising effects and extraction from periodic signals were achieved.The numerical results showed that the annual signal obtained with the CEEMDAN algorithm was significantly based on Lomb_Scargle spectrum analysis,and large differences in the long-term signals were found between the stations at different locations in Chinese mainland.With respect to data denoising,compared with the EMD and wavelet denoising algorithms,the CEEMDAN algorithm respectively improved the SNR by 29.35% and 36.54%,increased the correlation coefficient by 8.67% and 11.96%,and reduced root mean square error(RMSE)by 44.68% and 43.48%,indicating that the CEEMDAN algorithm had better denoising behavior than the other two algorithms.In addition,the results demonstrated that different denoising methods had little influence on estimating the annual vertical deformation velocity.The extraction of periodic signals showed that more components were retained by using the CEEMDAN algorithm than the EMD algorithm,which indicated that the CEEMDAN algorithm had advantages over frequency aliasing.In conclusion,the CEEMDAN algorithm was recommended for processing the GNSS height time series to analyze the vertical deformation due to its excellent features of denoising and the extraction of periodic signals.
基金This project was financially supported by the National Natural Science Foundation of China(Grant No.49876012,49976003)
文摘A probability density function of surface elevation is obtained through improvement of the method introduced by Cieslikiewicz who employed the maximum entropy principle to investigate the surface elevation distribution. The density function can be easily extended to higher order according to demand and is non-negative everywhere, satisfying the basic behavior of the probability, Moreover because the distribution is derived without any assumption about sea waves, it is found from comparison with several accepted distributions that the new form of distribution can be applied in a wider range of wave conditions, In addition, the density function can be used to fit some observed distributions of surface vertical acceleration although something remains unsolved.
基金The National Natural Science Foundation of China under contract No.41276088
文摘Several remotely sensed sea surface salinity(SSS) retrievals with various resolutions from the soil moisture and ocean salinity(SMOS) and Aquarius/SAC-D missions are applied as inputs for retrieving salinity profiles(S) using multilinear regressions. The performance is evaluated using a total root mean square(RMS) error, different error sources, and the feature resolutions of the retrieved S fields. In the mixed layer of the salinity, the SSS-S regression coefficients are uniformly large. The SSS inputs yield smaller RMS errors in the retrieved S with respect to Argo profiles as their spatial or temporal resolution decreases. The projected SSS errors are dominant, and the retrieved S values are more accurate than those of climatology in the tropics except for the tropical Atlantic, where the regression errors are abnormally large. Below that level, because of the influence of a sea level anomaly, the areas of high-accuracy S values shift to higher latitudes except in the high-latitude southern oceans, where the projected SSS errors are abnormally large. A spectral analysis suggests that the CATDS-0.25° results are much noisier and that the BEC-L4-0.25° results are much smoother than those of the other retrievals. Aquarius-CAP-1° generates the smallest RMS errors, and Aquarius-V2-1° performs well in depicting large-scale phenomena. BEC-L3-0.25°,which has small RMS errors and remarkable mesoscale energy, is the best fit for portraying mesoscale features in the SSS and retrieved S fields. The current priority for retrieving S is to improve the reliability of satellite SSS especially at middle and high latitudes, by developing advanced algorithms, combining both sensors, or weighing between accuracy and resolutions.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61434005,61474118,11674314,51672264,and 11404326)the Science and Technology Program of Jilin Province,China(Grant No.20150203011GX)+1 种基金the Science and Technology Program of Changchun City,China(Grant No.15SS02)the Youth Innovation Promotion Association of China(Grant No.2017260)
文摘In this paper, stable single-mode operation at high temperatures is produced by the surface-relief-integrated vertical cavity surface emitting laser(VCSEL). The gain-cavity mode detuning technique is employed to realize high operating temperatures for the VCSEL. The surface relief is etched in the centre of the top side as a mode discriminator for the fundamental mode output, and the threshold current minimum is 1.94 mA at high temperatures by the gain-cavity mode detuning technique. Maximum single-fundamental-mode output power of 0.45 mW at 80℃ is obtained, and the side mode suppression ratios(SMSRs) are more than 30 dB with increasing temperature and current, respectively.
基金supported by the National Basic Research Program of China(Grant Nos.2010CB934104,2009CB320300,and 2011CBA00608)the National Natural Foundation of China(Grant Nos.61604007,61378058,61376049,61575008,and 61574011)
文摘The characteristics of the photonic crystal vertical cavity surface emitting lasers(PhC-VCSELs) were investigated by using the full vector finite-difference time-domain(FDTD) method through the transverse mode loss analysis. PhC-VCSELs with different photonic crystal structures were analyzed theoretically and experimentally. Through combining the dual mode confinement of oxide aperture and seven-point-defect photonic crystal structure, the PhC-VCSELs with low threshold current of 0.9 mA and maximum output power of 3.1 mW operating in single fundamental mode were demonstrated. Mode loss analysis method was proven as a reliable and useful way to analyze and optimize the PhC-VCSELs.
基金The Key Project of the National Science Foundation of China under contract No. 40730842the "973" Project of China under contract No. 2010CB950303+2 种基金the Scientific Research Foundation of the First Institute of Oceanography, State Oceanic Administration of Chinaunder contract No. 2011T02the National Key Technology R&D Program of China under contract No. 2011BAC03B02the Key Supercomputing Science-Technology Project of Shandong Province of China under contract No. 2011YD01107
文摘A global eddy-permitting ocean-ice coupled model with a horizontal resolution of 0.25° by 0.25° is estab- lished on the basis of Modular Ocean Model version 4 (MOM4) and Sea Ice Simulator (SIS). Simulation results are compared with those of an intermediate resolution ocean-ice coupled model with a horizontal resolution of about 1° by 1°. The results show that the simulated ocean temperature, ocean current and sea ice concentration from the eddy-permitting model are better than those from the intermediate resolu- tion model. However, both the two models have the common problem of ocean general circulation models (OGCMs) that the majority of the simulated summer sea surface temperature (SST) is too warm while the majority of the simulated subsurface summer temperature is too cold. Further numerical experiments show that this problem can be alleviated by incorporating the non-breaking surface wave-induced vertical mixing into the vertical mixing scheme for both eddy-permitting and intermediate resolution models.
基金This work was supported by the National Key R&D program of China(grant no.2019YFB1309604)National Natural Science of Foundation of China(grant no.51875281,51861135306).
文摘As the basis of flight behavior,the initiation process of insect flight is accompanied by a transition from crawling mode to flight mode,and is clearly important and complex.Insects take flight from a vertical surface,which is more difficult than takeoff from a horizontal plane,but greatly expands the space of activity and provides us with an excellent bionic model.In this study,the entire process of a butterfly alighting from a vertical surface was captured by a high-speed camera system,and the movements of its body and wings were accurately measured for the first time.After analyzing the movement of the center of mass,it was found that before initiation,the acceleration perpendicular to the wall was much greater than the acceleration parallel to the wall,reflecting the positive effects of the legs during the initiation process.However,the angular velocity of the body showed that this process was unstable,and was further destabilized as the flight speed increased.Comparing the angles between the body and the vertical direction before and after leaving the wall,a significant change in body posture was found,evidencing the action of aerodynamic forces on the body.The movement of the wings was further analyzed to obtain the laws of the three Euler angles,thus revealing the locomotory mechanism of the butterfly taking off from the vertical surface.
基金Funded by the High Technology Research and Development Programme of China (2007AA04Z315)
文摘For operation and manipulation with nanometric positioning precision,an integrated micro nano-positioning xy-stage is developed,which is mainly composed of a silicon-based xy-stage,comb-driven actuator and displacement sensor.The high-aspect-ratio comb-driven xy-stage is achieved by deep reactive ion etching (DRIE) in both sides of wafer.The displacement sensor is mainly composed of four vertical sidewall surface piezoresistor connected to form a full Wheatstone bridge.A simple vertical sidewall surface piezoresistor process which improves on the basis of the conventional surface piezoresistor technique is proposed.The experimental results verify the integrated micro nano-positioning xy-stage including the vertical sidewall surface piezoresistor technique.The sensitivity of the fabricated piezoresistive sensors is better than 1.17 mV/μm without amplification and the linearity is better than 0.814%.Under 30 V driving voltage,a ±10 μm single-axis displacement is measured without crosstalk.The displacement resolution of the micro xy-stage is better than 10.8 nm.
基金supported by the Natural Science Foundation of China (Nos. 21177157, 40830102)the Basic Research Fund of CAMS (No. 2011Z003)China Special Fund for Meteorological Research in the Public Interest (No. GYHY201106023)
文摘Measurements of surface O3 and carbon monoxide(CO) were made from September 2009 to August 2011 at Dangxiong(30.48°N, 91.10°E, 4187 m a.s.l.), a remote highland site in a southern valley of the Nyainqêntanglha Mountains in the Tibetan Plateau, China. The monthly mean O3 mixing ratio ranged from 29.1 to 51.4 ppb, with an average of 38.5 ppb, and the maximum value was observed in May. The average diurnal cycle of O3 concentration showed a minimum in early morning and a maximum in the afternoon, with a broader "high platform" from the late morning to the late afternoon, and resembled that of surface wind speed. The concentration of surface O3 was highly significantly correlated with tropospheric column O3 over the regions surrounding Dangxiong and with that of surface O3 observed at a site north of the Nyainqêntanglha Mountains, suggesting a good regional representativeness of surface O3 at Dangxiong. In the afternoon when stronger winds blew, surface air showed distinct features of free-atmospheric air, with higher O3, lower CO, and lower relative humidity(RH). The negative O3-CO and O3-RH correlations in most months indicate a significant influence of air masses from the free troposphere. Trajectory analysis suggests that air masses originating from the south of the site make a negative net contribution to surface O3 and a positive contribution to CO and humidity, and those from the northwest sector contribute conversely to the respective quantities.
基金Supported in part by (Grant No.12071051)of NSFCthe Fundamental Research Funds (Grant No.DUT21LAB302)for the Central Universities。
文摘It is known that each compact connected orient able 3-manifold M with boundary admits an H’-splitting H1∪FH2,where F is a compact connected orientable surface properly embedded in M and splits M into two handlbodies H_(1) and H_(2).In this paper,we show that a non-completely L-reducible and minimal H’-splitting surface for a compact connected irreducible orientable anannular Seifert 3-manifold with boundary is horizontal,and give a necessary and sufficient condition for an amalgamation of two compact connected orientable 3-manifolds along a compact connected surface to be a Seifert manifold with boundary,and describe a characteristic of some H’-splittings to denote a Seifert 3-manifold with boundary.For a compact connected orientable Seifert manifold M with a semi-bundle structure M_(1)∪_(F)M_(2),we give an upper bound of the genus of the base surface.