Green Vertical‑Cavity Surface‑Emitting Lasers Based on InGaN Quantum Dots and Short Cavity

Room temperature low threshold lasing of green GaNbased vertical cavity surface emitting laser(VCSEL)was demonstrated under continuous wave(CW)operation.By using self-formed InGaN quantum dots(QDs)as the active region,the VCSEL emitting at 524.0 nm has a threshold current density of 51.97 A cm^(-2),the lowest ever reported.The QD epitaxial wafer featured with a high IQE of 69.94%and theδ-function-like density of states plays an important role in achieving low threshold current.Besides,a short cavity of the device(~4.0λ)is vital to enhance the spontaneous emission coupling factor to 0.094,increase the gain coefficient factor,and decrease the optical loss.To improve heat dissipation,AlN layer was used as the current confinement layer and electroplated copper plate was used to replace metal bonding.The results provide important guidance to achieving high performance GaN-based VCSELs.

Lateral Oxidation in Vertical Cavity Surface Emitting Lasers

Lateral oxidation in vertical cavity surface emitting lasers （VCSELs） is described,and its characteristics are investigated.A linear growth law is found for stripe mesas. However, oxide growth （above 435℃ ） follows a nonlinear law for the two geometry mesa structures which we employ in VCSEL. Theoretical analysis indicates that mesa structure geometry influences oxide growth rate at higher temperatures.

High Slope Efficiency and High Power 850nm Oxide-Confined Vertical Cavity Surface Emitting Lasers

High slope efficiency and high power selected oxide-confined 850nm VCSELs grown by MOCVD are reported.The slope efficiency and the threshold current respectively are 0 82mW/mA and 2 59mA with a 9μm diameter oxidation aperture at 25℃.The maximum power of 16mW is obtained at 23mA current bias.The minimum threshold current can be as low as 570μA with a 5μm diameter oxidation aperture at 25℃.The maximum saturated power is 5 5mW.

Exploitation technology of pressure relief coalbed methane in vertical surface wells in the Huainan coal mining area

Exploitation technology of pressure relief coalbed methane in vertical surface wells is a new method for exploration of gas and coalbed methane exploitation in mining areas with high concentrations of gas, where tectonic coal developed. Studies on vertical surface well technology in the Huainan Coal Mining area play a role in demonstration in the use of clean, new energy resources, preventing and reducing coal mine gas accidents and protecting the environment. Based on the practice of gas drainage engineering of pressure relief coalbed methane in vertical surface wells and combined with relative geological and exploration en- gineering theories, the design principles of design and structure of wells of pressure relief coalbed methane in vertical surface wells are studied. The effects of extraction and their causes are discussed and the impact of geological conditions on gas production of the vertical surface wells are analyzed. The results indicate that in mining areas with high concentrations of gas, where tectonic coal developed, a success rate of pressure relief coalbed methane in surface vertical well is high and single well production usually great. But deformation due to coal exploitation could damage boreholes and cause breaks in the connection between aquifers and bore-holes, which could induce a decrease, even a complete halt in gas production of a single well. The design of well site location and wellbore configuration are the key for technology. The development of the geological conditions for coalbed methane have a significant effect on gas production of coalbed methane wells.

Analysis of Potential Energy Surface for Butanone Isomerization

The potential energy surfaces for butanone isomerization have been investigated by density function theory calculation. Six main reaction pathways are confirmed using the intrinsic reaction coordinate method, and the corresponding isomerization products are 1-buten-2-ol, 2-buten-2-ol, butanal or 1-buten-l-ol, methyl 1-propenyl ether, methyl allyl ether, and ethyl vinyl ether, respectively. Among them, there are three pathways through butylene oxide, indicating butylene oxide is an important intermediate product during butanone isomer ization. The calculated vertical ionization energies of the reactant and its products are in a good agreement with the experimental values available. From the consideration for the relative energies Of transition states and the number of high-energy barriers we infer that the reaction pathway butanone-＊l-buten-2-ol---2-buten-2-oi is the most competitive. The obtained results are informative for future studies on isomerization of ketone molecules.

Thermal Analysis of Implant-Defined Vertical Cavity Surface Emitting Laser Array

A three-dimensional electrical-thermal coupling model based on the finite element method is applied to study thermal properties of implant-defined vertical cavity surface emitting laser （VCSEL） arrays. Several parameters including inter-element spacing, scales, injected current density and substrate temperature are considered. The actual temperatures obtained through experiment are in excellent agreement with the calculated results, which proves the accuracy of the model. Due to the serious thermal problem, it is essential to design arrays of low self-heating. The analysis can provide a foundation for designing VCSEL arrays in the future.

Surface Elevation Distribution of Sea Waves Based on the Maximum Entropy Principle

A probability density function of surface elevation is obtained through improvement of the method introduced by Cieslikiewicz who employed the maximum entropy principle to investigate the surface elevation distribution. The density function can be easily extended to higher order according to demand and is non-negative everywhere, satisfying the basic behavior of the probability, Moreover because the distribution is derived without any assumption about sea waves, it is found from comparison with several accepted distributions that the new form of distribution can be applied in a wider range of wave conditions, In addition, the density function can be used to fit some observed distributions of surface vertical acceleration although something remains unsolved.

Simulation of Far-Field Properties of Coherent Vertical Cavity Surface Emitting Laser Array

Far-field properties dependent on array scale, separation, element width and emitted wavelength are system atically analyzed theoretically and experimentally. An array model based on the finite-difference method is established to simulate the far-field profile of the coherent arrays. Some important conclusions are obtained. To achieve a higher quality beam, it is necessary to decrease separation between elements, or to increase the element width. Higher brightness can be achieved in the array with larger scale. Emitted wavelength also has an influence on the far-field profile. These analyses can be extended to the future design of coherent vertical cavity surface emitting laser arrays.

An efficient approach to characterizing and calculating carrier loss due to heating and barrier height variation in vertical-cavity surface-emitting lasers

It is important to determine quantitatively the internal carrier loss arising from heating and barrier height variation in a vertical-cavity surface-emitting quantum well laser （VCSEL）. However, it is generally difficult to realize this goal using purely theoretical formulas due to difficulty h, deriving the parameters relat^i~g to the quantum well structure. In this paper, we describe an efl：icient approach to characterizing and calculating the carrier loss due to the heating and the barrier height change in the VCSEL. In the method, the thermal carrier loss mechanism is combined with gain measurement and calculation. The carrier loss is re-characterized in a calculable form by constructing the threshold current and gain detuning-related loss current using the measured gain data and then substituting them for the quantum well-related parameters in the formula. The result can be expressed as a product of an exponential weight factor linked to the barrier height change and the difference between the threshold current and gain detuning-related loss current. The gain variation at cavity frequency due to thermal carrier loss and gain detuning processes is measured by using an AllnGaAs-AIGaAs VCSEL structure. This work provides a useful approach to analysing threshold and loss properties of the VCSEL, particularly, gain offset design for high temperature operation of VCSELs.

Vertical cavity surface emitting laser transverse mode and polarization control by elliptical hole photonic crystal

The polarization of traditional photonic crystal（PC） vertical cavity surface emitting laser（VCSEL） is uncontrollable,resulting in the bit error increasing easily.Elliptical hole photonic crystal can control the transverse mode and polarization of VCSEL efficiently.We analyze the far field divergence angle,and birefringence of elliptical hole PC VCSEL.When the ratio of minor axis to major axis b/a = 0.7,the PC VCSEL can obtain single mode and polarization.According to the simulation results,we fabricate the device successfully.The output power is 1.7 mW,the far field divergence angle is less than 10°,and the side mode suppression ratio is over 30 dB.The output power in the Y direction is 20 times that in the X direction.

Beam Steering Analysis in Optically Phased Vertical Cavity Surface Emitting Laser Array

Beam steering in implant defined coherently coupled vertical cavity surface emitting laser （VCSEL） arrays is simulated using the FDTD solution software. Angular deflection dependent on relative phase differences among elements, inter-element spacing, element size and emitted wavelength is analyzed detailedly and systematically. We design and fabricate 1×2 implant defined VCSEL arrays for optimum beam steering performance. Electroni- cally controlled beam steering with a maximum deflection angle of 1.6° is successfully achieved in the 1 × 2 VCSEL arrays. The percentage of the power in the central lobe is above 39% when steering. The results show that the steering is controllable. Compared with other beam steering methods, the fabrication process is simple and of low cost.

A performance evaluation of remotely sensed sea surface salinity products in combination with other surface measurements in reconstructing three-dimensional salinity fields

Several remotely sensed sea surface salinity（SSS） retrievals with various resolutions from the soil moisture and ocean salinity（SMOS） and Aquarius/SAC-D missions are applied as inputs for retrieving salinity profiles（S） using multilinear regressions. The performance is evaluated using a total root mean square（RMS） error, different error sources, and the feature resolutions of the retrieved S fields. In the mixed layer of the salinity, the SSS-S regression coefficients are uniformly large. The SSS inputs yield smaller RMS errors in the retrieved S with respect to Argo profiles as their spatial or temporal resolution decreases. The projected SSS errors are dominant, and the retrieved S values are more accurate than those of climatology in the tropics except for the tropical Atlantic, where the regression errors are abnormally large. Below that level, because of the influence of a sea level anomaly, the areas of high-accuracy S values shift to higher latitudes except in the high-latitude southern oceans, where the projected SSS errors are abnormally large. A spectral analysis suggests that the CATDS-0.25° results are much noisier and that the BEC-L4-0.25° results are much smoother than those of the other retrievals. Aquarius-CAP-1° generates the smallest RMS errors, and Aquarius-V2-1° performs well in depicting large-scale phenomena. BEC-L3-0.25°,which has small RMS errors and remarkable mesoscale energy, is the best fit for portraying mesoscale features in the SSS and retrieved S fields. The current priority for retrieving S is to improve the reliability of satellite SSS especially at middle and high latitudes, by developing advanced algorithms, combining both sensors, or weighing between accuracy and resolutions.

Simplified modeling of frequency behavior in photonic crystal vertical cavity surface emitting laser with tunnel injection quantum dot in active region

In this work, the characteristics of the photonic crystal tunneling injection quantum dot vertical cavity surface emitting lasers（Ph C-TIQD-VCSEL） are studied through analyzing a modified modulation transfer function. The function is based on the rate equations describing the carrier dynamics at different energy levels of dot and injector well. Although the frequency modulation response component associated with carrier dynamics in wetting layer（WL） and at excited state（ES） levels of dots limits the total bandwidth in conventional QD-VCSEL, our study shows that it can be compensated for by electron tunneling from the injector well into the dot in TIQD structure. Carrier back tunneling time is one of the most important parameters, and by increment of that, the bias current dependence of the total bandwidth will be insignificant. It is proved that at high bias current, the limitation of the WL-ES level plays an important role in reducing the total bandwidth and results in rollovers on 3-d B bandwidth-I curves. In such a way, for smaller air hole diameter of photonic crystal, the effect of this reduction is stronger.

Noise reduction and periodic signal extraction for GNSS height data in the study of vertical deformation

Global navigation satellite system(GNSS)technique has irreplaceable advantages in the continuous monitoring of surface deformation.Reducing noise to improve the signal-to-noise ratio(SNR)and extract the concerned signals is of great significance.As an improved algorithm of empirical mode decomposition(EMD),complete ensemble empirical mode decomposition with adaptive noise(CEEMDAN)algorithm has better signal processing ability.Using the CEEMDAN algorithm,the height time series of 29GNSS stations in Chinese mainland were analyzed,and good denoising effects and extraction from periodic signals were achieved.The numerical results showed that the annual signal obtained with the CEEMDAN algorithm was significantly based on Lomb_Scargle spectrum analysis,and large differences in the long-term signals were found between the stations at different locations in Chinese mainland.With respect to data denoising,compared with the EMD and wavelet denoising algorithms,the CEEMDAN algorithm respectively improved the SNR by 29.35% and 36.54%,increased the correlation coefficient by 8.67% and 11.96%,and reduced root mean square error(RMSE)by 44.68% and 43.48%,indicating that the CEEMDAN algorithm had better denoising behavior than the other two algorithms.In addition,the results demonstrated that different denoising methods had little influence on estimating the annual vertical deformation velocity.The extraction of periodic signals showed that more components were retained by using the CEEMDAN algorithm than the EMD algorithm,which indicated that the CEEMDAN algorithm had advantages over frequency aliasing.In conclusion,the CEEMDAN algorithm was recommended for processing the GNSS height time series to analyze the vertical deformation due to its excellent features of denoising and the extraction of periodic signals.

ANALYSIS OF UN-COINCIDE COORDINATE ERROR IN SINGLE-AXIS ROTATING FIBER OPTIC STRAP-DOWN INERTIAL NAVIGATION SYSTEM

The un-coincide coordinate error in the single-axis rotating fiber optic strap-down inertial navigation system（SINS） is analyzed. Firstly, a rotating modulation technology is presented for SINS. The method provides the enhanced property of SINS when using the same-leveled inertial measurement units. Then, the rotating struc- ture modification is derived and augmented to resolve the un-modulated error-accumulated problem. As the insuf- ficient machine processing, the horizontal and the vertical errors on the machine surface are inevitable, and the in- volved coordinates are difficult to get the exact coincident. So, two major kinds of coordinate situation are stud- ied. The equivalent error models on gyro and acceleration outputs are built for each situation, and the impact is analyzed for compensation. The part of attitude and position error models caused by the built angle-rate error is established to calculate the un-eoincident impact. Considering these conditions of different gyro accuracy and mo- tion states simultaneously, numerical simulations are implemented. Results indicate that the SINS modulation ac- curacy is seriously affected by the combined factors on gyro accuracy and motion conditions.

Wet Oxidation of Al_x Ga_(1-x)As/GaAs Distributed Bragg Reflectors

The wet oxidation of AlGaAs with high Al content in a distributed Bragg reflectors （DBR） is studied by scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. Some voids distribute along the oxide/GaAs interfaces due to the stress induced by the wet oxidation of the AlGaAs layers. These voids decrease the shrinkage of the Al2O3 layers to 8% instead of the theoretical 20% when compared to the unoxidized AlGaAs layers. With the extension of oxidation time, the reactants are more completely transported to the front interface and the products are more completely transported out along the porous interfaces. As a result,the oxide quality is better.

Single fundamental mode photonic crystal VCSEL with high power and low threshold current optimized by modal loss analysis

The characteristics of the photonic crystal vertical cavity surface emitting lasers（PhC-VCSELs） were investigated by using the full vector finite-difference time-domain（FDTD） method through the transverse mode loss analysis. PhC-VCSELs with different photonic crystal structures were analyzed theoretically and experimentally. Through combining the dual mode confinement of oxide aperture and seven-point-defect photonic crystal structure, the PhC-VCSELs with low threshold current of 0.9 mA and maximum output power of 3.1 mW operating in single fundamental mode were demonstrated. Mode loss analysis method was proven as a reliable and useful way to analyze and optimize the PhC-VCSELs.

850/940-nm VCSEL for optical communication and 3D sensing

This paper is going to review the state-of-the-art of the high-speed 850/940-nm vertical cavity surface emitting laser（VCSEL）, discussing the structural design, mode control and the related data transmission performance. InGaAs/AlGaAsmultiple quantum well （MQW） was used to increase the differential gain and photon density in VCSEL. The multiple oxidelayers and oxide-confined aperture were well designed in VCSEL to decrease the parasitic capacitance and generate single mode （SM） VCSEL. The maximal modulation bandwidth of 30 GHz was achieved with well-designed VCSEL structure. At the end of the paper, other applications of the near-infrared VCSELs are discussed.

A comparison of two global ocean-ice coupled models with different horizontal resolutions

A global eddy-permitting ocean-ice coupled model with a horizontal resolution of 0.25° by 0.25° is estab- lished on the basis of Modular Ocean Model version 4 （MOM4） and Sea Ice Simulator （SIS）. Simulation results are compared with those of an intermediate resolution ocean-ice coupled model with a horizontal resolution of about 1° by 1°. The results show that the simulated ocean temperature, ocean current and sea ice concentration from the eddy-permitting model are better than those from the intermediate resolu- tion model. However, both the two models have the common problem of ocean general circulation models （OGCMs） that the majority of the simulated summer sea surface temperature （SST） is too warm while the majority of the simulated subsurface summer temperature is too cold. Further numerical experiments show that this problem can be alleviated by incorporating the non-breaking surface wave-induced vertical mixing into the vertical mixing scheme for both eddy-permitting and intermediate resolution models.

Stable single-mode operation of 894.6 nm VCSEL at high temperatures for Cs atomic sensing

In this paper, stable single-mode operation at high temperatures is produced by the surface-relief-integrated vertical cavity surface emitting laser（VCSEL）. The gain-cavity mode detuning technique is employed to realize high operating temperatures for the VCSEL. The surface relief is etched in the centre of the top side as a mode discriminator for the fundamental mode output, and the threshold current minimum is 1.94 mA at high temperatures by the gain-cavity mode detuning technique. Maximum single-fundamental-mode output power of 0.45 mW at 80℃ is obtained, and the side mode suppression ratios（SMSRs） are more than 30 dB with increasing temperature and current, respectively.