Single Photon Detection Technology in Underwater Wireless Optical Communication:Modulation Modes and Error Correction Coding Analysis

This study explores the application of single photon detection(SPD)technology in underwater wireless optical communication(UWOC)and analyzes the influence of different modulation modes and error correction coding types on communication performance.The study investigates the impact of on-off keying(OOK)and 2-pulse-position modulation(2-PPM)on the bit error rate(BER)in single-channel intensity and polarization multiplexing.Furthermore,it compares the error correction performance of low-density parity check(LDPC)and Reed-Solomon(RS)codes across different error correction coding types.The effects of unscattered photon ratio and depolarization ratio on BER are also verified.Finally,a UWOC system based on SPD is constructed,achieving 14.58 Mbps with polarization OOK multiplexing modulation and 4.37 Mbps with polarization 2-PPM multiplexing modulation using LDPC code error correction.

Laser shaping and optical power limiting of pulsed Laguerre–Gaussian laser beams of high-order radial modes in fullerene C60

We study the strong nonlinear optical dynamics of nanosecond pulsed Laguerre–Gaussian laser beams of high-order radial modes with zero orbital angular momentum propagating in the fullerene C60molecular medium. It is found that the spatiotemporal profile of the incident pulsed Laguerre–Gaussian laser beam is strongly reshaped during its propagation in the C60molecular medium. The centrosymmetric temporal profile of the incident pulse gradually evolves into a noncentrosymmetric meniscus shape, and the on-axis pulse duration is clearly depressed. Furthermore, the field intensity is distinctly attenuated due to the field-intensity-dependent reverse saturable absorption, and clear optical power limiting behavior is observed for different orders of the input pulsed Laguerre–Gaussian laser beams before the takeover of the saturation effect;the lower the order of the Laguerre–Gaussian beam, the lower the energy transmittance.

Optical anapole modes in hybrid metal–dielectric nanoantenna for near-field enhancement and optical sensing

Metal–dielectric nanostructures in the optical anapole modes are essential for light–matter interactions due to the low material loss and high near-field enhancement. Herein, a hybrid metal–dielectric nanoantenna composed of six wedgeshaped gold(Au) nanoblocks as well as silica(SiO2) and silicon(Si) nanodiscs is designed and analyzed by the finite element method(FEM). The nanoantenna exhibits flexibility in excitation and manipulation of the anapole mode through the strong coupling between the metal and dielectrics, consequently improving the near-field enhancement at the gap. By systematically optimizing the structural parameters, the electric field enhancement factors at wavelengths corresponding to the anapole modes(AM1 and AM2) can be increased to 518 and 1482, respectively. Moreover, the nanoantenna delivers great performance in optical sensing such as a sensitivity of 550 nm/RIU. The results provide guidance and insights into enhancing the coupling between metals and dielectrics for applications such as surface-enhanced Raman scattering and optical sensing.

An ISGW Filtering Antenna with Spurious Modes and Surface Wave Suppression for Millimeter Wave Communications

In this paper,an integrated substrate gap waveguide(ISGW)filtering antenna is proposed at millimeter wave band,whose surface wave and spurious modes are simultaneously suppressed.A secondorder filtering response is obtained through a coupling feeding scheme using one uniform impedance resonator(UIR)and two stepped-impedance resonators(SIRs).To increase the stopband width of the antenna,the spurious modes are suppressed by selecting the appropriate sizes of the ISGW unit cell.Furthermore,the ISGW is implemented to improve the radiation performance of the antenna by alleviating the propagation of surface wave.And an equivalent circuit is investigated to reveal the working principle of ISGW.To demonstrate this methodology,an ISGW filtering antenna operating at a center frequency of 25 GHz is designed,fabricated,and measured.The results show that the antenna achieves a stopband width of 1.6f0(center frequency),an out-of-band suppression level of 21 dB,and a peak realized gain of 8.5 dBi.

Surface roughness prediction model in ultrasonic vibration assisted grinding of BK7 optical glass

Pre-knowledge of machined surface roughness is the key to improve whole machining efficiency and meanwhile reduce the expenditure in machining optical glass components.In order to predict the surface roughness in ultrasonic vibration assisted grinding of brittle materials,the surface morphologies of grinding wheel were obtained firstly in the present work,the grinding wheel model was developed and the abrasive trajectories in ultrasonic vibration assisted grinding were also investigated,the theoretical model for surface roughness was developed based on the above analysis.The prediction model was developed by using Gaussian processing regression(GPR)due to the influence of brittle fracture on machined surface roughness.In order to validate both the proposed theoretical and GPR models,32sets of experiments of ultrasonic vibration assisted grinding of BK7optical glass were carried out.Experimental results show that the average relative errors of the theoretical model and GPR prediction model are13.11%and8.12%,respectively.The GPR prediction results can match well with the experimental results.

Influence on Multimode Rectangular Optical Waveguide Propagation Loss by Surface Roughness

Optical scattering loss coefficient of muhimode rectangular waveguide is analyzed in this work. First, the effective refrac tive index and the mode field distribution of waveguide modes are obtained using the Marcatili method. The influence on scattering loss coefficient by waveguide surface roughness is then analyzed. Finally, the mode coupling efficiency for the SMFOpticalWaveguide （SOW） structure and MMFOptical Waveguide （MOW） structure are presented. The total scatter ing loss coefficient depends on modes scattering loss coeffi cients and the mode coupling efficiency between fiber and waveguide. The simulation results show that the total scatter ing loss coefficient for the MOW structure is affected more strongly by surface roughness than that for the SOW struc ture. The total scattering loss coefficient of waveguide decreas es from 3.97 x 10^-2 dB/cm to 2.96 x 10^-4 dB/cm for the SOW structure and from 5.24 - 10^-2 dB/cm to 4.7 x 10^-4 dB/ cm for the MOW structure when surface roughness is from 300nm to 20nm and waveguide length is 100cm.

Mechanobiology of the cell surface:Probing its remodeling dynamics using membrane tether pulling assays with optical tweezers

Mammalian cell surfaces consist of the plasma membrane supported by an underneath cortical cytoskeleton.Together,these structures can control not only the shape of cells but also a series of cellular functions ranging from migration and division to exocytosis,endocytosis and differentiation.Furthermore,the cell surface is capable of exerting and reacting to mechanical forces.Its viscoelastic properties,especially membrane tension and bending modulus,are fundamental parameters involved in these responses.This viewpoint summarizes our current knowledge on how to measure the viscoelastic properties of cell surfaces employing optical tweezers-based tether assays,paving the way for a better understanding of how cells react to external mechanical forces,with a glance on their remodeling dynamics and possible consequences on downstream cellular processes.

Resonantly enhanced second-and third-harmonic generation in dielectric nonlinear metasurfaces

Nonlinear dielectric metasurfaces provide a promising approach to control and manipulate frequency conversion optical processes at the nanoscale,thus facilitating both advances in fundamental research and the development of new practical applications in photonics,lasing,and sensing.Here,we employ symmetry-broken metasurfaces made of centrosymmetric amorphous silicon for resonantly enhanced second-and third-order nonlinear optical response.Exploiting the rich physics of optical quasi-bound states in the continuum and guided mode resonances,we comprehensively study through rigorous numerical calculations the relative contribution of surface and bulk effects to second-harmonic generation(SHG)and the bulk contribution to third-harmonic generation(THG) from the meta-atoms.Next,we experimentally achieve optical resonances with high quality factors,which greatly boosts light-matter interaction,resulting in about 550 times SHG enhancement and nearly 5000-fold increase of THG.A good agreement between theoretical predictions and experimental measurements is observed.To gain deeper insights into the physics of the investigated nonlinear optical processes,we further numerically study the relation between nonlinear emission and the structural asymmetry of the metasurface and reveal that the generated harmonic signals arising from linear sharp resonances are highly dependent on the asymmetry of the meta-atoms.Our work suggests a fruitful strategy to enhance the harmonic generation and effectively control different orders of harmonics in all-dielectric metasurfaces,enabling the development of efficient active photonic nanodevices.

Polar Quasi-Confined Optical Phonon Modes in Wurtzite Quasi-One-Dimensional GaN/Al_xGa_(1-x)N Quantum Well Wires

Based on the dielectric continuum model and Loudon＇s uniaxial crystal model,quasi-confined （QC） optical phonon modes and electron-QC phonon coupling functions in quasi-one-dimensional （QID） wurtzite quantum well wires （QWWs） are deduced and analyzed. Numerical calculations on an AIN/GaN/AIN wurtzite QWW are performed. The results reveal that the dispersions of the QC modes are quite obvious only when the free wavenumber kz in the z-direction and the azimuthal quantum number m are small. The reduced behavior of the QC modes in wurtzite quantum systems is clearly observed. Through the discussion of the electron-QC mode coupling functions,it is found that the lower-frequency QC modes in the high-frequency region play a more important role in the electron-QC phonon interactions. Moreover,our computations also prove that kz and m have a similar influence on the electron-QC phonon coupling properties.

Microvascular alterations of the ocular surface and retina in connective tissue disease-related interstitial lung disease

AIM:To examine the disparities in macular retinal vascular density between individuals with connective tissue disease-related interstitial lung disease(CTD-ILD)and healthy controls(HCs)by optical coherence tomography angiography(OCTA)and to investigate the changes in microvascular density in abnormal eyes.METHODS:For a retrospective case-control study,a total of 16 patients(32 eyes)diagnosed with CTD-ILD were selected as the ILD group.The 16 healthy volunteers with 32 eyes,matched in terms of age and sex with the patients,were recruited as control group.The macular retina’s superficial retinal layer(SRL)and deep retinal layer(DRL)were examined and scanned using OCTA in each individual eye.The densities of retinal microvascular(MIR),macrovascular(MAR),and total microvascular(TMI)were calculated and compared.Changes in retinal vascular density in the macular region were analyzed using three different segmentation methods:central annuli segmentation method(C1-C6),hemispheric segmentation method[uperior right(SR),superior left(SL),inferior left(IL),and inferior right(IR)],and Early Treatment Diabetic Retinopathy Study(ETDRS)methods[superior(S),inferior(I),left(L),and right(R)].The data were analyzed using Version 9.0 of GraphPad prism and Pearson analysis.RESULTS:The OCTA data demonstrated a statistically significant difference(P<0.05)in macular retinal microvessel density between the two groups.Specifically,in the SRL and DRL analyses,the ILD group exhibited significantly lower surface density of MIR and TMI compared to the HCs group(P<0.05).Furthermore,using the hemispheric segmentation method,the ILD group showed notable reductions in SL,SR,and IL in the superficial retina(P<0.05),as well as marked decreases in SL and IR in the deep retina(P<0.05).Similarly,when employing the ETDRS method,the ILD group displayed substantial drops in superficial retinal S and I(P<0.05),along with notable reductions in deep retinal L,I,and R(P<0.05).In the central annuli segmentation method,the ILD group exhibited a significant decrease in the superficial retinal C2-4 region(P<0.05),whereas the deep retina showed a notable reduction in the C3-5 region(P<0.05).Additionally,there was an observed higher positive likelihood ratio in the superficial SR region and deep MIR.Furthermore,there was a negative correlation between conjunctival vascular density and both deep and superficial retinal TMI(P<0.001).CONCLUSION:Patients with CTD-ILD exhibits a significantly higher conjunctival vascular density compared to the HCs group.Conversely,their fundus retinal microvascular density is significantly lower.Furthermore,CTD-ILD patients display notably lower superficial and deep retinal vascular density in comparison to the HCs group.The inverse correlation between conjunctival vascular density and both superficial and deep retinal TMI suggests that detecting subtle changes in ocular microcirculation could potentially serve as an early diagnostic indicator for connective tissue diseases,thereby enhancing disease management.

Optical Fibre Communication Feature Analysis and Small Sample Fault Diagnosis Based on VMD-FE and Fuzzy Clustering

To solve the problems of a few optical fibre line fault samples and the inefficiency of manual communication optical fibre fault diagnosis,this paper proposes a communication optical fibre fault diagnosis model based on variational modal decomposition(VMD),fuzzy entropy(FE)and fuzzy clustering(FC).Firstly,based on the OTDR curve data collected in the field,VMD is used to extract the different modal components(IMF)of the original signal and calculate the fuzzy entropy(FE)values of different components to characterize the subtle differences between them.The fuzzy entropy of each curve is used as the feature vector,which in turn constructs the communication optical fibre feature vector matrix,and the fuzzy clustering algorithm is used to achieve fault diagnosis of faulty optical fibre.The VMD-FE combination can extract subtle differences in features,and the fuzzy clustering algorithm does not require sample training.The experimental results show that the model in this paper has high accuracy and is relevant to the maintenance of communication optical fibre when compared with existing feature extraction models and traditional machine learning models.

Dual-channel fiber-optic surface plasmon resonance sensor with cascaded coaxial dual-waveguide D-type structure and microsphere structure

To address the restriction of fiber-optic surface plasmon resonance(SPR) sensors in the field of multi-sample detection, a novel dual-channel fiber-optic SPR sensor based on the cascade of coaxial dual-waveguide D-type structure and microsphere structure is proposed in this paper. The fiber sidepolishing technique converts the coaxial dual-waveguide fiber into a D-type one, and the evanescent wave in the ring core leaks, generating a D-type sensing region;the fiber optic fused ball push technology converts the coaxial dual waveguides into microspheres, and the stimulated cladding mode evanescent wave leaks, producing the microsphere sensing region. By injecting light into the coaxial dual-waveguide middle core alone, the sensor can realize single-stage sensing in the microsphere sensing area;it can also realize dual-channel sensing in the D-type sensing area and microsphere sensing area by injecting light into the ring core. The refractive index measurement ranges for the two channels are 1.333–1.365 and 1.375–1.405, respectively, with detection sensitivities of 981.56 nm/RIU and 4138 nm/RIU. The sensor combines wavelength division multiplexing and space division multiplexing technologies, presenting a novel research concept for multi-channel fiber SPR sensors.

Theoretical analysis of the optical rotational Doppler effect under atmospheric turbulence by mode decomposition

The optical rotational Doppler effect associated with orbital angular momentum provides a new means for rotational velocity detection.In this paper,we investigate the influence of atmospheric turbulence on the rotational Doppler effect.First,we deduce the generalized formula of the rotational Doppler shift in atmospheric turbulence by mode decomposition.It is found that the rotational Doppler signal frequency spectrum will be broadened,and the bandwidth is related to the turbulence intensity.In addition,as the propagation distance increases,the bandwidth also increases.And when C_(n)^(2)≤5×10^(-15)m^(-2/3)and 2z≤2 km,the rotational Doppler signal frequency spectrum width d and the spiral spectrum width d_(0)satisfy the relationship d=2d_(0-1).Finally,we analyze the influence of mode crosstalk on the rotational Doppler effect,and the results show that it destroys the symmetrical distribution of the rotational Doppler spectrum about 2l·Ω/2π.This theoretical model enables us to better understand the generation of the rotational Doppler frequency and may help us better analyze the influence of the complex atmospheric environment on the rotational Doppler frequency.

Corrigendum to“Electromagnetically induced transparency via localized surface plasmon mode-assisted hybrid cavity QED”

We would like to point out the misprinted Fig.3 in our published paper[Chin.Phys.B 32,114205(2023)].Since only orders of subfigures need to be corrected and the main results of the published paper are correct,we present the correct figure in this corrigendum.

Electromagnetically induced transparency via localized surface plasmon mode-assisted hybrid cavity QED

In recent years, most studies have focused on the perfect absorption and high-efficiency quantum memory of the onesided system, ignoring the characteristics of its optical switching contrast. Thus, the performance of all-optical switching and optical transistors is limited. Herein, we propose a localized surface plasmon(LSP) mode-assisted cavity QED system which consists of a Λ-shaped three-level quantum emitter(QE), a metal nanoparticle and a one-sided optical cavity with a fully reflected mirror. In this system, the QE coherently couples to the cavity and LSP mode respectively, which is manipulated by the control field. As a result, considerably high and stable switch contrast of 90% can be achievable due to the strong confined field of the LSP mode and perfect absorption of the optical medium. In addition, we obtain a power dependent effect between the control field and the transmitted frequency as a result of the converted dark state. We employ the Heisenberg–Langevin equation and numerical master equation formalisms to explain high switching, controllable output light and the dark state. Our system introduces an effective method to improve the performance of optical switches based on the one-sided system in quantum information storage and quantum communication.

Local density of optical states calculated by the mode spectrum in stratified media

The local density of optical states(LDOS)is an important physical concept,which can characterize the spontaneous emission of microcavities.In order to calculate the LDOS,the relationship between the mode spectrum and the LDOS is established.Then,based on the transfer matrix method and the effective resonator model,the leaky loss of the leaky mode and the mode spectrum in the one-dimensional photonic bandgap crystal waveguide are calculated,results of which indicate that the mode spectrum can characterize the leaky loss of the leaky mode.At last,the density of optical states(DOS),and the LDOS in each layer are calculated.The partial DOS and the partial LDOS in the quantum well,related to the fundamental leaky mode,can be used to find out the optimal location of the quantum well in the defect layer to couple more useful photons into the lasing mode for lasers.

Optical Surface Monitoring系统跟踪运动靶区的位置精度和剂量精度验证

目的:评估Optical Surface Monitoring System(OSMS)测量靶区运动的几何精度和使用OSMS跟踪运动靶区放疗时的剂量精度。方法:①分别使用OSMS与锥形束CT监测腹部模体的位置,通过移动治疗床使模体产生位移和旋转,对比二者对模体位置的测量结果;②用呼吸运动平台搭载MatriXX二维电离室阵列,测量不同跟踪阈值时模体内相对剂量,分别与计划剂量分布对比,分析不同跟踪阈值时计划验证的gamma通过率。结果:OSMS和锥形束CT系统对模体平移和旋转预设偏移的测量结果差异很小,使用OSMS门控技术时OSMS的阈值越小gamma通过率越高,相对剂量分布与计划剂量的一致性也越好。结论:OSMS系统对模体表面位置监测精度高,可以应用到实际放射治疗的辅助摆位。使用OSMS门控技术跟踪运动靶区可以提高靶区的剂量精度,而且对患者不附加任何电离辐射,适合应用于分次间的辅助摆位和分次内的靶区跟踪。

Ionization wave propagation and cathode sheath formation due to surface dielectric-barrier discharge sustained in pulsed mode

This work deals with the experimental study of a surface dielectric-barrier discharge,as a part of the ongoing interest in the control of plasma induced electro-fluid dynamic effects(e.g.plasma actuators).The discharge is generated using a plasma reactor consisting of a fused silica plate which is sandwiched between two printed circuit boards where the electrodes are developed.The reactor is driven by narrow high voltage square pulses of asymmetric rising(25 ns)and falling(2.5μs)parts,while the discharge evolution is considered in a temporarily and spatially resolved manner over these pulses.That is,conventional electrical and optical emission analyzes are combined with high resolution optical emission spectroscopy and ns-resolved imaging,unveiling main characteristics of the discharge with a special focus on its propagation along the dielectric-barrier surface.The voltage rising part leads to cathode-directed ionization waves,which propagate with a speed up to 105m s~(-1).The voltage falling part leads to cathode sheath formation on the driven electrode.Τhe polarization of the dielectric barrier appears critical for the discharge dynamics.

Geochemistry and Modes of Occurrence of Hazardous Trace Elements in the No.11 Coal Seam,Antaibao Surface Mine,Shanxi Province

Concentrations of seventeen hazardous trace elements including As, Pb, Hg, Se, Cd, Cr, Co, Mo, Mn, Ni, U, V, Th, Be, Sb, Br and Zn in the No.ll coal seam, Antaibao surface mine, Shanxi Province were determined using Instrumental Neutron Activation Analysis （INAA）, Inductively Coupled Plasma Atomic Emission Spectrometry （ICP-AES）, Cold-Vapor Atomic Absorption Spectrometry （CV-AAS） and Graphite Furnace Atomic Absorption Spectrometry （GF-AAS）. Comparisons with average concentrations of trace elements in Chinese coal show that the concentrations of Hg and Cd in the No. 11 coal seam, Antaibao surface mine are much higher. They may be harmful to the environment in the process of utilization. The variations of the trace elements contents and pyritic suffur in vertical section indicated that： （a） the concentrations of As, Pb, Mn, and pyritic sulfur decrease from roof to floor; （b） the concentrations of Cr, Zn and Mo are higher in roof, floor and lower in coal seam; （c） the concentration of Br, Sb, and Hg are higher in coal seam and lower in roof and floor; （d） the concentrations of Mo, V, Th and AI vary consistently with the ash yield. Cluster analysis of trace elements, pyritic sulfur, ash yield and major elements, such as AI, Fe, P, Ca shows that： （a） pyritic sulfur, Fe, As, Mn, Ni, Be are closely associated and reflect the influence of pyrite; （b） Mo, Se, Pb, Cr, Th, Co, Ca and A! are related to clay mineral, which is the main source of ash; （c） U, Zn, V, Na, P maybe controlled by phosphate or halite; （d） Hg, Br, Sb and Cd may be mainly organic-associated elements which fall outside the three main groups. The concentration distribution characteristics of trace elements in coal seam and the cluster analysis of major and trace elements showed that the contents of trace elements in the No. 11 coal seam, Antaibao surface mine, are mainly controlled by detrital input and migration from roof and floor.

Distinct Modes of Winter Arctic Sea Ice Motion and Their Associations with Surface Wind Variability

Using monthly mean sea ice velocity data obtained from the International Arctic Buoy Programme （IABP） for the period of 1979–1998 and the monthly mean NCEP/NCAR re-analysis dataset （1960–2002）, we investigated the spatiotemporal evolution of the leading sea ice motion mode （based on a complex correlation matrix constructed of normalized sea ice motion velocity） and their association with sea level pressure （SLP） and the predominant modes of surface wind field variability. The results indicate that the leading winter sea ice motion mode’s spatial evolution is characterized by two alternating and distinct sea ice modes, or their linear combination. One mode （M1） shows a nearly closed cyclonic or anti-cyclonic circulation anomaly in the Arctic Basin and its marginal seas, resembling to a large extent the response of sea ice motion to the Arctic Oscillation （AO）, as many previous studies have revealed. The other mode （M2） displays a coherent cyclonic or anti-cyclonic circulation anomaly with its center close to the Laptev Sea, which has not been identified in previous observational studies. In fact, M1 and M2 respectively reflect the responses of sea ice motion to two predominant modes of winter surface wind variability north of 70 ？ N, which well correspond, with slight differences, to the first two modes of EOF analysis of winter monthly mean SLP north of 70 ？ N. These slight differences in SLP anomalies lead to a difference of M2 from the response of sea ice motion to the dipole anomaly. Although the AO significantly influences sea ice motion, it is not crucial for the existence of M1. The new sea ice motion mode （M2） has the largest variance and clearly differs from the response of winter monthly mean sea ice motion to the dipole anomaly in SLP fields, and corresponding SLP anomalies also show differences compared to the dipole anomaly. This study indicates that in the Arctic Basin and its marginal seas, slight differences in SLP anomaly patterns can force distinctly different sea ice motion anomalies.