Facile electrochemical surface-alloying and etching of Au wires to enable high-performance substrates for surface enhanced Raman scattering

Surface-enhanced Raman Spectroscopy(SERS)is a nondestructive technique for rapid detection of analytes even at the single-molecule level.However,highly sensitive and reliable SERS substrates are mostly fabricated with complex nanofabrication techniques,greatly restricting their practical applications.A convenient electrochemical method for transforming the surface of commercial gold wires/foils into silver-alloyed nanostructures is demonstrated in this report.Au substrates are treated with repetitive anodic and cathodic bias in an electrolyte of thiourea,in a one-pot one-step manner.X-rays absorption fine structure(XAFS)spectroscopy confirms that the AuAg alloy is induced at the surface.The unique AuAg alloyed surface nanostructures are particularly advantageous when served as SERS substrates,enabling a remarkably sensitive detection of Rhodamine B(a detection limit of 10^(-14)M,and uniform strong response throughout the substrates at 10^(-12)M).

Surface Enhanced Raman Scattering on Self-assembled Nano Silver Film Prepared by Electrolysis Method

We demonstrate surface enhanced Raman scattering （SERS） detection of self-assembled nano silver film using a low-cost electrolysis strategy at a proper voltage and silver nitrate concentration in electrolyte. The concentration dependence of SERS from crystal violet （CV） molecules adsorbed to silver film was systematically studied. Importantly, the SERS surface enhancement factor of such nano silver film was 603, which was measured by a portable Raman spectrometer. The minimum concentration of detectable CV molecules can be as low as 10^-11 mol/L. The nano silver film prepared by this electrolysis method is an active, stable, cost-effective, and reusable SERS substrate.

Ultrasonic-Assisted Synthesis of Monodisperse Ag Nanoparticles and Their Applications in Surface Enhanced Raman Scattering and Fluorescence Enhancement

Monodisperse Ag nanoparticles with diameters of about 3.4 nm were synthesized by a facile ultrasonic synthetic route at room temperature with the reduction of borane-tert-butylamine in the presence of oleylamine （OAm） and oleic acid （OA）. The reaction parameters of time, the molar ratios of OAm to OA were studied, and it was found that these parameters played important roles in the morphology and size of the products. Meanwhile, surface enhanced Raman spectrum （SERS） property suggested the Ag nanoparticles exhibited high SERS effect on the model molecule Rhodamine 6G. And also, two-photon fluorescence images showed that the silver nanoparticles had high performances in fluorescence enhancement.

Molybdenum Nanoscrews:A Novel Non-coinage-Metal Substrate for Surface-Enhanced Raman Scattering

For the first time, Mo nanoscrew was cultivated as a novel non-coinage-metal substrate for surface-enhanced Raman scattering(SERS). It was found that the nanoscrew is composed of many small screw threads stacking along its length direction with small separations. Under external light excitation, strong electromagnetic coupling was initiated within the gaps, and many hot-spots formed on the surface of the nanoscrew, which was confirmed by high-resolution scanning near-field optical microscope measurements and numerical simulations using finite element method. These hotspots are responsible for the observed SERS activity of the nanoscrews. Raman mapping characterizations further revealed the excellent reproducibility of the SERS activity. Our findings may pave the way for design of low-cost and stable SERS substrates.

Hybrid metal-insulator-metal structures on Si nanowires array for surface enhanced Raman scattering

Surface enhanced Raman scattering(SERS)is an efficient technique to detect low concentration molecules.In this work,periodical silicon nanowires(Si NWs)integrated with metal-insulator-metal(MIM)layers are employed as SERS substrates.Laser interference lithography(LIL)combined with reactive ion etching(RIE)is used to fabricate large-area periodic nanostructures,followed by decorating the MIM layers.Compared to MIM disks array on Si surface,the SERS enhancement factor(EF)of the MIM structures on the Si NWs array can be increased up to 5 times,which is attributed to the enhanced electric field at the boundary of the MIM disks.Furthermore,high density of nanoparticles and nanogaps serving as hot spots on sidewall surfaces also contribute to the enhanced SERS signals.Via changing the thickness of the insulator layer,the plasmonic resonance can be tuned,which provides a new localized surface plasmon resonance(LSPR)characteristic for SERS applications.

Surface-enhanced Raman scattering properties of highly ordered self-assemblies of gold nanorods with different aspect ratios

Gold nanorods with aspect ratios of from 1 （particles） to 31.6 were synthesized by the seed-mediated method and packed in a highly ordered structure on a large scale on silicon substrates through capillary force induced self-assembly behaviour during solvent evaporation. The gold nanorod surface exhibits a strong enhancing effect on Raman scattering spectroscopy. The enhancement of Raman scattering for two model molecules （2-naphthalenethiol and rhodamine 6C） is about 5-6 orders of magnitude. By changing the aspect ratio of the Au nanorods, we found that the enhancement factors decreased with the increase of aspect ratios. The observed Raman scattering enhancement is strong and should be ascribed to the surface plasmon coupling between closely packed nanorods, which may result in huge local electromagnetic field enhancements in those confined junctions.

EFFECT OF SOLVENT ON SURFACE ENHANCED RAMAN SCATTERING SPECTRA OF COLLOIDAL SILVER

The effect of solvent on surface enhanced Raman scattering [SERS) of colloidal silver has been studied. Experiments show that the intensity of SERS is related to the polarity and molecular constitution of the solvent. The influence of solvent is due to the change of the adsorption quantity and adsorption intensity.

Quantitative and sensitive detection of prohibited fish drugs by surface-enhanced Raman scattering

Rapid and simple detections of two kinds of prohibited fish drugs, crystal violet （CV） and malachite green （MG）, were accomplished by surface-enhanced Raman scattering （SERS）. Based on the optimized Au/cicada wing, the detectable concentration of CV/MG can reach 10-7 M, and the linear logarithmic quantitative relationship curves between log/and logC allows for the determination of the unknown concentration of CV/MG solution. The detection of these two analytes in real environment was also achieved, demonstrating the application potential of SERS in the fast screening of the prohibited fish drugs, which is of great benefit for food safety and environmental monitoring.

Raman and Surface-enhanced Raman Scattering of Chlorophenols

Raman spectrum is a powerful analytical tool for determining the chemical information of compounds. In this study, we obtained analytical results of chlorophenols（CPs） molecules including 4-chlorophenol（4-CP）, 2,6-dich- lorophenol（2,6-DCP） and 2,4,6-trichlorophenol（2,4,6-TCP） on the surface of Ag dendrites by surface-enhanced Raman scattering（SERS） spectra. SEM images indicate that the SERS substrate of Ag dendrites is composed of a large number of polygonal nanocrystallites, which self-assembled into a 3D hierarchical structure. It was found that there were distinct differences for those three molecules from Raman and SERS spectra. This indicates that SERS could be a new tool of detection technique regarding trace amounts of CPs.

Mechanism of Surface-Enhanced Raman Scattering and Its Application to Highly Sensitive Protein Detection

Surface-enhanced resonance Raman scattering(SERRS)has recently attracted great interest in analytical science due toenormous enhancement factors that have decreased the detec-tionli mits of a wide variety of molecules to the single moleculelevel.The SERRS-electromagnetic(EM)model describessingle-molecule SERRS

Controllable Silver Plating on Silica for Surface-enhanced Raman Scattering

We proposed a facile and rapid method for preparing silica-silver core-shell（SSCS） substrates to use Ag electroless plating on SiO2@Au-seed particles.UV-Vis-NIR absorption spectrometer and SEM were employed to monitor the reaction process of the formation of Ag on the surfaces of silica beads,and the optical resonance of the substrate could shift from visible to NIR region.It has been found that surface-enhanced Raman scattering（SERS） enhancement changes with the electroless plating time and the SSCS substrate with the plating time of 90 s（90SSCS） shows the strongest SERS response under the laser excitation at 514.5 nm.Signals collected over multiple spots and substrate of rhodamine 6G（R6G） resulted in a relative standard deviation（RSD） of 9.75%.The calculated enhancement factor（EF） was approximately 105 ＂106.SSCS substrate exhibits high SERS performance,which is due to electromagnetic SERS enhancement with additional localization field within closely packed Ag nanoparticles decorated on the SiO2 nanoparticles.And this substrate presents tunable and broad localized surface plasmon resonance（LSPR）,so this method may open a new way for SERS studies with other laser excitation.

Surface-enhanced resonance Raman scattering spectroscopy of single R6G molecules

Surface-enhanced resonance Raman scattering （SERRS） of Rhodamine 6G （R6G） adsorbed on colloidal silver clusters has been studied. Based on the great enhancement of the Raman signal and the quench of the fluorescence, the SERRS spectra of R6G were recorded for the samples of dye colloidal solution with different concentrations. Spectral inhomogeneity behaviours from single molecules in the dried sample films were observed with complementary evidences, such as spectral polarization, spectral diffusion, intensity fluctuation of vibrational lines and even ＂breathing＂ of the molecules. Sequential spectra observed from a liquid sample with an average of 0.3 dye molecules in the probed volume exhibited the expected Poisson distribution for actually measuring 0, 1 or 2 molecules. Difference between the SERRS spectra of R6G excited by linearly and circularly polarized light were experimentally measured.

SURFACE-ENHANCED RAMAN SCATTERING:PRINCIPLES,NANOSTRUCTURES,FABRICATIONS,AND BIOMEDICAL APPLICATIONS

This article gives an overview of the development and applications of the surfaceenhanced Raman scattering(SERS)techniques in biomedicine.We first introduce the fundamental principles of the SERS mechanisms.We also present the different fabrication techniques of SERS nanostructures and substrates.Finally,the importance and potential roles of the SERS nanostructures and substrates in biomedical applications are summarized.

Surface-enhanced Raman scattering on nanodiamond-derived carbon onions

Annealing nanodiamonds(ND) at high temperatures up to 1700 ℃ is a common method to synthesize carbon onions. The transformation from NDs to carbon onions is particularly interesting because of carbon onions' potential in the field of tribology and their application in ultra-charge/discharge devices. In this paper, a novel surface-enhanced Raman scattering technique that involves coating the sample with nanoscopic gold particles is proposed to characterize the NDs after different annealing treatments. Conventional Raman and surfaceenhanced Raman spectra were obtained, and the changes of peak parameters as the function of annealing temperature were evaluated. It was found that the widths of the D and the G peaks decreased with increasing annealing temperature, reflecting an improved order in the sp^2-hybridized carbon during the transformation from NDs to carbon onions. After annealing at 1700 ℃, the sp^2?carbon was highly ordered, indicating desirable electrical conductivity and lubricity. With increasing annealing temperature, the D peak showed a blue shift of almost30 cm^(-1), while the G peak merely shifted by 5 cm^(-1). For annealing temperatures above 1100 ℃, an increase of intensity ratio ID/IGwas observed. Compared to the uncoated area, red shifts of 0.5-2 cm^(-1) and of 5-9 cm^(-1) for the G and D peaks, respectively, were detected for the gold-coated area, which was due to the coupling of the plasmons and the phonons of the samples.

TiO_2/Ag composite nanowires for a recyclable surface enhanced Raman scattering substrate

Multifunctional TiO2/Ag composite nanowires are fabricated with a hydrothermal method by precipitating Ag nanoparticles （NPs） on the surfaces of TiO2 nanowires. This hierarchical one-dimensional （1D） nanostructure can be used as a surface enhanced Raman scattering （SERS） substrate with high sensitivity, for detecting the rhodamine 6G （R6G） in a wide range of low concentrations （from 1 × 10 6 M to 1 × 10-12 M）. In addition, the substrate can be self-cleaned under the irradiation of ultraviolet （UV） light due to the superior photocatalytic capacity of the TiO2/Ag composite nanostructure, making the recycled use of SERS substrates closer to reality. With both the evident SERS performance and high efficiency of photocatalytic capacity, such TiOz/Ag composite nanowires demonstrate considerable potential in the chemical sensing of organic pollutants.

STUDY ON PHOTO-INDUCED ORIENTATION OF A NOVEL PHOTO-ALIGNMENT FILM WITH SURFACE ENHANCED RAMAN SCATTERING (SERS) SPECTROSCOPY

Surface enhanced Raman scattering (SERS) spectroscopy was first utilized to study the photo-orientation behaviour of the photoreactive groups on a novel photo-alignment film surface and elucidate the generation mechanism of pretilt angle. The novel photo-alignment film was prepared by spin-coating a solution of ladderlike polysiloxane (LPS) bearing dual photoreactive group on an ITO surface and by irradiation with linear-polarized ultraviolet (LPUV) light A Si—H terminal compound (M) containing an identical photosensitive part has been used to fabricate a model film for SERS investigation.

Selective synthesis of three-dimensional ZnO@Ag/SiO2@Ag nanorod arrays as surface-enhanced Raman scattering substrates with tunable interior dielectric layer

We describe the synthesis of three-dimensional(3D) multilayer ZnO@Ag/SiO2@Ag nanorod arrays by the physico–chemical method. The surface-enhanced Raman scattering(SERS) performance of the 3D multilayer Zn O@Ag/SiO2@Ag nanorod arrays is studied by varying the thickness of dielectric layer SiO2 and outer-layer noble Ag. The 3D Zn O@Ag/SiO2@Ag nanorod arrays create a huge number of SERS "hot spots" that mainly contribute to the high SERS sensitivity. The great enhancement of SERS results from the electron transfer between ZnO and Ag and different electromagnetic enhancements of Ag nanoparticles(NPs) with different thicknesses. Through the finite-difference time-domain(FDTD) theoretical simulation, the enhancement of SERS signal can be ascribed to a strong electric field enhancement produced in the 3D framework. The simplicity and generality of our method offer great advantages for further understanding the SERS mechanism induced by the surface plasmon resonance(SPR) effect.

Comparison of Surface-enhanced Raman Scattering Spectra of Two Kinds of Silver Nanoplate Films

Surface-enhanced Raman scattering（SERS） spectra of different silver nanoplate selt-assembled tllmS at different excitation wavelengths were fairly compared. Shape conversion from silver nanoprisms to nanodisks on slides was in situ carried out. The SERS spectra of 4-mercaptopyridine（4-MPY） on these anisotropic silver nanopar- ticle self-assembled films present that strong enhancement appeared when the excitation line and the surface plasmon resonance（SPR） band of silver substrate overlapped. In this model, the influence of the crystal planes of silver na- noplates on SERS enhancement could be ignored because the basal planes were nearly unchanged in two kinds of silver nanoplate self-assembled films.

Surface-enhanced Raman scattering sensor based on fused biconical taper zone of optical fiber

In this paper, a novel surface-enhanced Raman scattering （SERS） sensor combined with fused biconical taper fiber （FBTF） and film coated with silver sols is proposed. This structure is designed to significantly increase the SERS active surface when the length of the taper is increased and the radius is reduced, since the penetration depth is inversely proportional to the taper radius and proportional to the taper length according to the fiber-optic evanescent-wave theory. Based on the SERS sensing principle, the feasibility of FBTF sensor is analyzed in this paper. As a result, the Raman spectrum of R6G is obtained from the fused biconical taper zone surface coating with the silver sols in our experiments. The detected concentration is up to 10-7mol/L.

Monitoring the penetration and accumulation of gold nanoparticles in rat skin ex vivo using surface-enhanced Raman scattering spectroscopy

Contamination by accidental cutaneous contact with the commercial products and the air pol-hutants raised a considerable health and safety issue.This study aimed to trace the dynamics of the 20 nm gold nanopartide(GNP)penetration and accumulation in rat skin tissues using a surface-enhanced Raman scattering(SERS)techmique.After the topical application of GNPs on rat skin surface,the SERS spectra were recorded for every 15 pum to an overall depth of 75 pum from skin surface for 150 min.The processes of GNP penetration in rat skin were accompanied by aggregation of GNPs,which affected SERS spectra.The results revealed that 20 nm GNPs can penetrate through stratum corneum layer,viable epidermis layer,and then into dermis layer.This study demonstrated for the first time the potential of SERS spectroscopy to monitor the penetration and accumulation of GNPs in rat skin.