Effect of RE Oxide on Impact Toughness and Primary Structure of Surfacing Metal

The effect of rare earth(RE) oxide on impact toughness and primary structure of surfacing metal was investigated . The results show that the impact toughness of surfacing metal containing RE oxide can be increased by 50 %. The primary structure can be refined and its shape changed from columnar crystals to equiaxed ones.

Surface Metallization of Glass Fiber(GF)/Polyetheretherketone(PEEK) Composite with Cu Coatings Deposited by Magnetron Sputtering and Electroplating

Surface metallization of glass fiber(GF)/polyetheretherketone(PEEK)[GF/PEEK] is conducted by coating copper using electroplating and magnetron sputtering and the properties are determined by X-ray diffraction(XRD), scanning electron microscopy(SEM), and electron backscatter diffraction(EBSD).The coating bonding strength is assessed by pull-out tests and scribing in accordance with GB/T 9286-1998.The results show that the Cu coating with a thickness of 30 μm deposited on GF/PEEK by magnetron sputtering has lower roughness, finer grain size, higher crystallinity, as well as better macroscopic compressive stress,bonding strength, and electrical conductivity than the Cu coating deposited by electroplating.

Neutral and metallic vs.charged and semiconducting surface layer in acceptor doped CeO_(2)

The monomolecular surface layer of acceptor doped CeO_(2) may become neutral and metallic or charged and semiconducting.This is revealed in the theoretical analysis of the oxygen pressure dependence of the surface defects concentration in acceptor doped ceria with two different dopant types and operated under different oxygen pressures.Recently published experimental data for highly reduced Sm0.2Ce0.8O1.9-x(SDC)containing a fixed valence dopant Sm3+are very different from those published for Pr0.1Ce0.9O_(2)-x(PCO) with the variable valence dopant Pr4+/Pr3+being reduced under milder conditions.The theoretical analysis of these experimental results fits very well the experimental results of SDC and PCO.It leads to the following predictions:the highly reduced surface of SDC is metallic and neutral,the metallic surface electron density of state is gs=0.9×10^(38)J-1·m^(-2)(1.4×1015eV^(-1)·cm^(-2)),the electron effective mass is meff,s=3.3me,and the phase diagram of the reduced surface has theα(fcc)structure as in the bulk.In PCO a double layer is predicted to be formed between the surface and the bulk with the surface being negatively charged and semiconducting.The surface of PCO maintains high Pr^(3+) defect concentration as well as relative high oxygen vacancy concentration at oxygen pressures higher than in the bulk.The reasons for the difference between a metallic and semiconducting surface layer of acceptor doped CeO_(2) are reviewed,as well as the key theoretical considerations applied in coping with this problem.For that we make use of the experimental data and theoretical analysis available for acceptor doped ceria.

A review of ^(17)O isotopic labeling techniques for solid-state NMR structural studies of metal oxides in lithium-ion batteries

Recent advances in utilizing ^(17)O isotopic labeling methods for solid-state nuclear magnetic resonance(NMR)investigations of metal oxides for lithium-ion batteries have yielded extensive insights into their structural and dynamic details.Herein,we commence with a brief introduction to recent research on lithium-ion battery oxide materials studied using ^(17)O solid-state NMR spectroscopy.Then we delve into a review of ^(17)O isotopic labeling methods for tagging oxygen sites in both the bulk and surfaces of metal oxides.At last,the unresolved problems and the future research directions for advancing the ^(17)O labeling technique are discussed.

Surface metallization of PTFE and PTFE composites by ion implantation for low-background electronic substrates in rare-event detection experiments

Polytetrafluoroethylene(PTFE)is a low-background polymer that is applied to several applications in rare-event detection and underground low-background experiments.PTFE-based electronic substrates are important for reducing the detection limit of high-purity germanium detectors and scintillator calorimeters,which are widely applied in dark matter and 0υββdetection experiments.The traditional adhesive bonding method between PTFE and copper is not conducive to working in liquid nitrogen and extremely low-temperature environments.To avoid adhesive bonding,PTFE must be processed for surface metallization owing to the mismatch between the PTFE and copper conductive layer.Low-background PTFE matrix composites(m-PTFE)were selected to improve the electrical and mechanical properties of PTFE by introducing SiO_(2)/TiO_(2) particles.The microstructures,surface elements,and electrical properties of PTFE and m-PTFE were characterized and analyzed following ion implantation.PTFE and m-PTFE surfaces were found to be broken,degraded,and cross-linked by ion implantation,resulting in C=C conjugated double bonds,increased surface energy,and increased surface roughness.Comparably,the surface roughness,bond strength,and conjugated double bonds of m-PTFE were significantly more intense than those of PTFE.Moreover,the interface bonding theory between PTFE and the metal copper foil was analyzed using the direct metallization principle.Therefore,the peel strength of the optimized electronic substrates was higher than that of the industrial standard at extremely low temperatures,while maintaining excellent electrical properties.

Magnetic field effect in photodetachment from negative ion in electric field near metal surface

Based on the closed-orbit theory, the magnetic field effect in the photodetachment of negative ion in the electric field near a metal surface is studied for the first time. The results show that the magnetic field can produce a significant effect on the photodetachment of negative ion near a metal surface. Besides the closed orbits previously found by Duet al. for the H in the electric field near a metal surface （J. Phys. B 43 035002 （2010））, some additional closed orbits are produced due to the effect of magnetic field. For a given ion surface distance and an electric field strength, the cross section depends sensitively on the magnetic field strength. As the magnetic field strength is very small, its influence can be neglected. With the increase of the magnetic field strength, the number of the closed orbits increases greatly and the oscillation in the cross section becomes much more complex. Therefore we can control the photodetachment cross section of the negative ion by changing the magnetic field strength. We hope that our results may guide future experimental studies for the photodetachment process of negative ion in the presence of external fields and surfaces.

The influence of electric field on the photodetachment of H^- near a metal surface

The influence of electric field on the photodetachment of H- near a metal surface is investigated based on the closed-orbit theory. It is found that the photodetachment of H- near a metal surface is not only related to the electric field strength but also to the electric field direction. If the electric field is along the ＋z axis, it can strengthen the oscillation in the photodetachment cross section. However, if the electric field is along the -z axis, since the direction of electric field force is opposite to that of static-image force caused by the metal surface, the situation becomes much more complicated. When the electric field is very weak, its influence can be neglected. The photodetachment cross section is nearly the same as that when a single metal surface exists. When the electric field strength is strong enough, the electric field force is able to counteract the metallic attraction, therefore no closed orbit is formed. If the electric field continues to increase until its influence becomes dominant, the photodetachment cross section approaches the case of the photodetachment of H^- in an electric field. Our results may be useful for guiding future experimental studies on the photodetachment of negative ions near surfaces.

The closed-orbit and the photoabsorption spectra of the Rydberg hydrogen atom between two parallel metallic surfaces

Using the closed orbit theory, we study the classical motion and calculatethe photoabsorption spectra of Rydberg hydrogen atom between two parallel metallic surfaces. The results show that the metallic surfaces have a significant effect on the photoabsorption process. When the distances between the hydrogen atom and the two metallic surfaces are close to a critical value dc, the number of the closed orbits is the greatest. When the distance larger or smaller than dc, the number of the closed orbits decreases and the absorption spectra are shown to exhibit a damping oscillation. This work is an interesting new application of closed-orbit theory and is of potential experimental interest.

Photodetachment of negative ion in a gradient electric field near a metal surface

Based on closed-orbit theory, the photodetachment of H- in a gradient electric field near a metal surface is studied. It is demonstrated that the gradient electric field has a significant influence on the photodetachment of negative ions near a metal surface. With the increase of the gradient of the electric field, the oscillation in the photodetachment cross section becomes strengthened. Besides, in contrast to the photodetachment of H- near a metal surface in a uniform electric field, the oscillating amplitude and the oscillating region in the cross section of a gradient electric field also become enlarged. Therefore, we can use the gradient electric field to control the photodetachment of negative ions near a metal surface. We hope that our results will be useful for understanding the photodetachment of negative ions in the vicinity of surfaces, cavities, and ion traps.

Theoretical Investigations of the Activation of CO2 on the Transition Metal-doped Cu(100) and Cu(111) Surfaces

Periodic density functional theory calculations have been performed to investigate the chemisorption behavior of COz molecule on a series of surface alloys that are built by dispersing individual middle-late transition metal （TM） atoms （TM = Fe, Co, Ni, Ru, Rh, Pd, Ag, Os, lr, Pt, Au） on the Cu（100） and Cu（lll） surfaces. The most stable configurations of CO2 chemisorbed on different TM/Cu surfaces are determined, and the results show that among the late transition metals, Co, Ru, and Os are potentially good dopants to enhance the chemisorption and activation of CO2 on copper surfaces. To obtain a deep understanding of the adsorption property, the bonding characteristics of the adsorption bonds are carefully examined by the crystal orbital Hamilton population technique, which reveals that the TM atom primarily provides d orbitals with z-component, namely dz2, dxz, and dvz orbitals to interact with the adsorbate.

Preliminary study on the distribution of nutrients, organic matter, trace metals in sea surface microlayer in Xiamen Bay and Jiulong Estuary

The enrichment of nutrients (Noa-, Noa-, PO43-), suspended particles, organic matter (POC, PON,DOC) , and trace metals (Cu, Ni, Cd) was determined in the sea surface microlayer of Xiamen Bay and Jiulong Estuary. The mean enrichment factors ([Xi]microlayer/[Xi ]15cm in depth) mostly ranged between 1 . 0 and 2. 0. The dissolved forms were the major forms of the components measured, the enrichment of dissolved organic matter and suspended particles could lead to the changes in the total amount and speciation of nutrients and trace metals. No correlation was observed between sample concentrations, speciation, enrichment factors and sample locations. However, some evidence shows that these parameters are correlated with sea state, indicating the complexity and dynamic nature of the sea surface microlayer.

Infrared transparent frequency selective surface based on iterative metallic meshes

In this paper, we present an infrared transparent frequency selective surface（ITFSS） based on iterative metallic meshes, which possesses the properties of high transmittance in infrared band and band-pass effect in millimeter wave band. Cross-slot units are designed on the iterative metallic meshes, which is composed of two same square metallic meshes with a misplaced overlap. In the infrared band of 3–5 μm, the ITFSS has an average transmittance of 80% with a Mg F2 substrate. In the millimeter wave band, a transmittance of-0.74 d B at the resonance frequency of 39.4 GHz is obtained. Moreover, theoretical simulations of the ITFSS diffractive characteristics and transmittance response are also investigated in detail. This ITFSS may be an efficient way to achieve the metamaterial millimeter wave/infrared functional film.

Understanding charge transfer of Li^+ and Na^+ ions scattered from metal surfaces with high work function

For Li^＋ and Na^＋ ions scattered from high work function metal surfaces, efficient neutralization is observed, and it cannot be explained by the conventional free electron model. In order to explain these experimental data, we investigate the velocity-dependent neutral fraction with the modified Brako–Newns（BN） model. The calculated results are in agreement with the experimental data. We find that the parallel velocity effect plays an important role in neutralizing the Li^＋ and Na^＋ ions for large angle scattering. The nonmonotonic velocity behavior of neutral fraction is strongly related to the distance-dependent coupling strength between the atomic level and metal states.

Wear resistance of surface metal matrix composite produced by gas tungsten arc melt injection of Cr3C2 -NiCr particles into low carbon steel

Cr3 C2-NiCr particles were injected into the melted surface of Q235 low carbon steel to make a surface metal matrix composite （MMC） layer by gas tungsten are melt injection （GTAMI） process. Hardness of the surface MMC layer was tested. Wear resistance of the surface MMC was investigated with a ball-on-disk dry sliding setup. Microstrnetures of the surface MMC layer and morphology of the worn surfaces were investigated with scanning electron microscopy （SEM）. The results showed that the hardness of the MMC was as high as 1 960. 7 HV. Wear loss of the upper part of the MMC layer is onlyO. 8% of that of the substrate under the dry sliding condition given. Wear loss of the bottom part is 2. 5 % of that of the substrate.

THE MECHANISM OF SURFACE METALLIZATION OF POLYVINYL ALCOHOL COMPLEX METAL CHELATE FILMS

A novel method for preparing metalllzed film has been studied.The reduction process and properties of the poly(vinyl alcohol)(PVA)were probed by several analytic means.According to the etudies,a mechanism for the polymer surface reduction metallization was proposed and proved.

Anomalous microwave reflection from a metal surface induced by spoof surface plasmon

The reflection of X-band microwaves （8-12 GHz） from a metallic aluminum （A1） surface with groove grating corrugations was investigated experimentally. It was shown that the reflection of p-polarization is much less than the microwave reflected from the corresponding area of an unruled Al surface, with selective wavelength. The experimental results demonstrated that the anomalous microwave reflection is strongly associated with the excitation of spoof surface plasmons at the Al air interface by the surface grating coupler. This near-total absence of reflected microwaves is similar to the famous Wood＇s anomaly in the optical regime and is of fundamental importance to the applications of spoof surface plasmons in the microwave regime.

Electric potential distribution near nanocone arrays on metal substrates

Based on the nanostructured surface model,where conical nanoparticle arrays grow out symmetrically from a plane metal substrate,a theoretical model of the local electric potential near nanocones is built when a uniform external electric field is applied.In terms of this model,the electric potential distribution near the nanocone arrays is obtained and given by a curved surface using a numerical computation method.The computational results show that the electric potential distribution near the nanocone arrays exhibit an obvious geometrical symmetry.These results could serve as a basis for explaining many abnormal phenomena,such as the abnormal infrared effects（AIREs） which are found on nanostructured metal surfaces,as well as a reference for investigating the applications of nanomaterials,such as nanoelectrodes and nanosensors.

Ultrafast Modulation of the Molten Metal Surface Tension under Femtosecond Laser Irradiation

We predict ultrafast modulation of the pure molten metal surface stress fields under the irradiation of the single femtosecond laser pulse through the two-temperature model molecular-dynamics simulations. High-resolution and precision calculations are used to resolve the ultrafast laser-induced anisotropic relaxations of the pressure components on the time-scale comparable to the intrinsic liquid density relaxation time. The magnitudes of the dynamic surface tensions are found being modulated sharply within picoseconds after the irradiation, due to the development of the nanometer scale non-hydrostatic regime behind the exterior atomic layer of the liquid surfaces.The reported novel regulation mechanism of the liquid surface stress field and the dynamic surface tension hints at levitating the manipulation of liquid surfaces, such as ultrafast steering the surface directional transport and patterning.

The combined effect of optical laser and microwave radiations on a metal surface

In this paper, it is shown that the laser radiation intensity required for complete ionization of vapors produced on an irradiated metal surface can be reduced by more than an order of magnitude through using pulsed laser radiation in combination with microwave radiation.