Synergistic anionic/zwitterionic mixed surfactant system with high emulsification efficiency for enhanced oil recovery in low permeability reservoirs

Emulsification is one of the important mechanisms of surfactant flooding. To improve oil recovery for low permeability reservoirs, a highly efficient emulsification oil flooding system consisting of anionic surfactant sodium alkyl glucosyl hydroxypropyl sulfonate(APGSHS) and zwitterionic surfactant octadecyl betaine(BS-18) is proposed. The performance of APGSHS/BS-18 mixed surfactant system was evaluated in terms of interfacial tension, emulsification capability, emulsion size and distribution, wettability alteration, temperature-resistance and salt-resistance. The emulsification speed was used to evaluate the emulsification ability of surfactant systems, and the results show that mixed surfactant systems can completely emulsify the crude oil into emulsions droplets even under low energy conditions. Meanwhile,the system exhibits good temperature and salt resistance. Finally, the best oil recovery of 25.45% is achieved for low permeability core by the mixed surfactant system with a total concentration of 0.3 wt%while the molar ratio of APGSHS:BS-18 is 4:6. The current study indicates that the anionic/zwitterionic mixed surfactant system can improve the oil flooding efficiency and is potential candidate for application in low permeability reservoirs.

Temperature-resistant and salt-tolerant mixed surfactant system for EOR in the Tahe Oilfield

A new temperature-resistant and salt-tolerant mixed surfactant system(referred to as the SS system)for enhancing oil recovery at the Tahe Oilfield(Xinjiang,China)was evaluated.Based on the analysis of the crude oil,the formation water and rock components in the Tahe Oilfield,the long-term thermal stability,salt tolerance and the ability to change the wettability,interfacial activity and oil washing efficiency of the mixed surfactant system were studied.The system contains the anionic surfactant SDB and another cationic surfactant SDY.When the total mass concentration of the SS solution is 0.15 wt%,m(SDB)/m(SDY)ratio is 1 to 1,and excellent efficiencies are achieved for oil washing for five kinds of Tahe Oilfield crude oils(more than 60%).In addition,after adding cationic surfactant,the adsorption capacity of the surfactant is further reduced,reaching 0.261 mg/g.The oil displacement experiments indicate that under a temperature of 150°C and a salinity of 24.6×104 mg/L,the SS system enhances the oil recovery by over 10%after water flooding.The SS anionic–cationic surfactant system is first presented in the open literature that can be successfully applied to obtain predictions of Tahe Oilfield carbonate reservoirs with a high temperature and high salinity.

Separation of Biphenyl Nitrile Compounds by Microemulsion Electrokinetic Chromatography with Mixed Surfactants

A mixture of nine biphenyl nitrile compounds with high hydrophobicity and similar structures was successfully separated by microemulsion electrokinetic chromatography (MEEKC) within 30 min. The buffer system contained 100 mmol/L sodium dodecyl sulfate (SDS), 80 mmol/L sodium cholate (SC), 0.81% heptane, 7.5% n-butanol, 10% acetonitrile and 10 mmol/L borate. The addition of SC, organic modifiers, sample preparation and temperature all showed remarkable effect on the separation. Meanwhile, the MEEKC method was briefly compared with micellar electrokinetic chromatography (MEKC) method.

An Experimental Study on Alkaline/Surfactant/Polymer Flooding Systems Using Natural Mixed Carboxylate

Orthogonal-test-design method has been used to determine the optimal formula by phase behavior and interfacial tension studies, respectively. The effect of each component of two alkaline/surfactant/polymer flooding systems on interfacial tension is discussed, in which a low-price natural mixed carboxylate (SDC) is used as the major surfactant. The results indicate that the optimal composition is SDC (0.5%), alkaline NaHCO3/Na2CO3 with mass ratio of 1 (1.0%), and hydrolyzed polyacrylamide(0.1%). In the coreflood experiment, their oil recovery is increased by about 25.2% and 26.8% original oil in place, respectively.

Sensitizing Effect of Mixed Surfactants on the Colouration of Scandium(Ⅲ)with Phenylfluorone or Its Derivatives

In the presence of mixed micelle of a cationic and a nonionic surfactants,the reaction of scandium(Ⅲ) with phenylfluorone or its derivatives results in a very sensitive colouration:furthermore this chromophoric system tolerates the existence of a considerable amount of masking agents,so that many interfering ions can be masked and its selectivity would be further improved.After studying the optimum conditions and main charac- ters of some similar systems,the system of Sc(Ⅲ)—Orthonitrophenyuorone—Cetyltrimethylammonium Bromide(CTMAB)—Triton X-200 is chosen for the spectrophotometric determination of microamount of scandium.The proposed method shows not only high sensitivity(with a molar absorptivity of 2.12×1~sL mol^(-1)·cm^(-1))and selectivity,but also high tolerance of chromophoric conditions.Beer's law is obeyed over a range of 0～6.0 μg Sc/25ml.If the dual-wavelength method is applied,a much higher molar absorptivity o|' 3.04×10~5L·mol^(-1)·cm^(-1)than those of other systems ever reported in the literatures can be attained:more- over.its linear range is extended to 0～8.0 μg Sc/25ml and its reproducibility is also improved.

Interaction of nonionic surfactant AEO_9 with ionic surfactants

The interaction in two mixtures of a nonionic surfactant AEO9 (C12H25O(CH2CH2O)9H) and different ionic surfactants was investigated. The two mixtures were AEO9/sodium dodecyl sulfate (SDS) and AEO9/cetyltrimethylammonium bromide (CTAB) at molar fraction of AEO9, A EO9 α =0.5. The surface properties of the surfactants, critical micelle concentration (CMC), effectiveness of surface tension reduction (γCMC), maximum surface excess concentration (Γmax) and minimum area per molecule at the air/solution interface (Amin) were determined for both individual surfactants and their mixtures. The significant deviations from ideal behavior (attractive interactions) of the nonionic/ionic surfactant mixtures were determined. Mixtures of both AEO9/SDS and AEO9/CTAB exhibited synergism in surface tension reduction efficiency and mixed micelle formation, but neither exhibited synergism in surface tension reduction effectiveness.

Thermodynamic analysis of mixed and dry reforming of methane for solar thermal applications

Thermodynamic analysis of the reforming of methane with carbon dioxide alone （＂dry reforming＂） and with carbon dioxide and steam together （＂mixed reforming＂） is performed as part of a project which investigates the suitability of these endothermic reactions for the storage of solar thermal energy. The Gibbs free energy minimization method was employed to identify thermodynamically optimal operating conditions for dry reforming as well as mixed reforming with a desired H2/CO molar ratio of 2. The non-stoichiometric equilibrium model was developed using FactSage software to conduct the thermodynamic calculations for carbon formation, H2/CO ratio, CH4 conversion and H2 yield as a function of reaction temperature, pressure and reactant molar ratios. Thermodynamic calculations demonstrate that in the mixed reforming process, optimal operating conditions in a carbon-free zone are under H2O/CH4 /CO2 =1.0/1.0/0.5, p = 1 to 10 bar and T = 800 to 850℃ for the production of syngas with a H2 /CO molar ratio of 2. Under the optimal conditions, the maximum H2 yield of 88.0% is achieved at 1 bar and 850℃ with a maximum CH4 conversion of 99.3%. In the dry reforming process, a carbon formation regime is always present at a CO2/CH4 molar ratio of 1 for T = 700 1000℃ and p = 1-30 bar, whereas a carbon-free regime can be obtained at a CO2/CH4 molar ratio greater than 1.5 and T≥800℃.

MIXED HYBRID PENALTY FINITE ELEMENT METHOD AND ITS APPLICATION

The penalty and hybrid methods are being much used in dealing with the general incompatible element, With the penalty method convergence can always be assured, but comparatively speaking its accuracy is lower, and the condition number and sparsity are not so good. With the hybrid method, convergence can be assured only when the rank condition is satisfied. So the construction of the element is extremely limited. This paper presents the mixed hybrid penalty element method, which combines the two methods together. And it is proved theoretically that this new method is convergent, and it has the same accuracy, condition number and sparsity as the compatible element. That is to say, they are optimal to each other.Finally, a new triangle element for plate bending with nine freedom degrees is constructed with this method (three degreesof freedom are given on each corner -- one displacement and tworotations), the calculating formula of the element stiffness matrix is almost the same as that of the old triangle element for plate bending with nine degrees of freedom But it is converged to true solution with arbitrary irregrlar triangle subdivision. If the true solution u?H3 with this method the linear and quadratic rates of convergence are obtianed for three bending moments and for the displacement and two rotations respectively.

An Inquiry into the Application and Preparation of Surfactant in Oil Field

As a commonly used chemical agent,surfactant is used to improve the efficiency of oil-and-gas exploitation.Since the conventional surfactant technology fails to meet the requirements of oil-and-gas resources exploitation currently,this paper deeply researches on the studies of cutting-edge technology of oil-and-gas exploitation,and learns the advanced experience from foreign countries.It aims to point out that the needs of China’s demand for oil-and-gas exploitation can be met with through technology innovation,preparation methods improvement and key technology mastery of surfactant in oil field.

Interaction between Cationic Surfactants and Bromopyrogallol Red as well as Its Application for the Sensitive and Selective Determination of Mo in Mo/W Binary Mixtures

Prior to formation of the micelles of cationic surfactant (CSF), bromopyrogallol red (BPR) could exist in the forms of both monomer and oligomer After that, however, only BPR monomer existed. Nonionic surfactant OP-10 favoured the oligomerization of BPR monomer. The mixed micellar media prepared by mixing CSF and OP-10 in an appropriate ratio could be used for the sensitive and selective determination of Mo in Mo/W binary mixtures.

Synthesis of nanoiron by microemulsion with Span/Tween as mixed surfactants for reduction of nitrate in water

Denitrification of nitrate in groundwater using iron nanoparticles has received increasing interest in recent years.In order to fabricate iron nanoparticles with homoge-neously spherical shape and narrow size distribution,a simple and“green”method was developed to synthesize iron nano-particles.The conventional microemulsion methods were modified by applying Span 80 and Tween 60 as mixed sur-factants.The maximum content of water in the Water-in-oil(W/O)microemulsion and its appropriate forming conditions were found,and then the microemulsion system consisting of saturated Fe^(2+)solution was used to synthesizeα-Fe ultrafine particles by redox reaction.The nanoparticles were characterized by using powder X-ray diffraction(XRD)and transmission electron microscopy(TEM).The results show that the average diameter of the particle is about 80-90 nm.The chemical activity of the obtained iron nanoparticles was studied by the denitrification experiment of nitrate.The results show that under the experimental conditions,iron removed most of the 80 mg/L nitrate within 30 min.The mass balance of nitrate reduction with nanoscale Fe indicates that endproducts are mainly ammonia.Two possible reaction pathways for nitrate reduction by nanoscale iron particles have been proposed in this work.

Wormlike Micelle Formation and Rheological Behavior in the Aqueous Solutions of Mixed Sulfate Gemini Surfactant without Spacer Group and Dodecyltrimethylammonium Bromide

The rheological behavior of the aqueous solutions of mixed sulfate gemini surfactant with no spacer group, referred to as d-C12S, and dodecyltrimethylammonium bromide （C12TABr） at a total concentration of 100 mmol,L-1 but different molar ratios of ClzTABr to d-C12S （a1） was investigated using steady rate and frequency sweep measurements. The wormlike micelles were formed over a narrow a1 range of 0.20-0.27. The viscoelastic solutions exhibited Maxwell fluid behavior. At the optimum molar ratio of 0.25, the zero-shear viscosity was as high as 600 paos and the length of the mixed wormlike micelle was about 0.45-0.85 pm. The present result provides an exam- ple to construct long wormlike micelles by anionic gemini surfactant.

Removal of Ni（ll） ions from wastewater by micellar enhanced ultrafiltration using mixed surfactants

Ni（II） ions were removed from aqueous waste using micellar enhanced ultrafiltration （MEUF） with a mixture of surfactants. The surfactant mixture was the nonionic surfactant Tween 80 （TW80） mixed with the anionic surfactant sodium dodecyl sulfate （SDS） in different molar ratios ranging from 0.1-1.5. The opera- tional variables of the MEUF process such as pH, applied pressure, surfactant to metal ion ratio and nonionic to ionic surfactant molar ratio （α） were evaluated. Rejection of Ni and TW80 was 99% and 98% respectively whereas that for SDS was 65%. The flux and all resistances （fouling resistance, resistance due to concentration polarization） were measured and calculated for entire range of α respectively. A calculated flux was found to be declined with time, which was mainly attributed to concentration polarization rather than resistance from membrane fouling.

Mixed Monolayers of Tween-80 and Oleic Acid at Air/Water Interface

Polyoxyethylene sorbitan monooleate(Tween-80) and oleic acid(OA) with different molar ratios were mixed and spread at air/water interface on subphases with varied pH values by using a Langmuir trough to investigate the laws governing the performance of the two components.The surface excess free energy(△G_M^(exc)) of mixed monolayers with various mixed molar ratios at different pH values under the surface pressure of 10 mN/m was analyzed,for the compatibility evaluation of mixtures in the monolayer.The results indicated that Tween-80 and OA could be miscible in thermodynamics under almost all the conditions in the experiments,except when the molar ratios of OA were more than 0.5 on the alkaline subphase at pH 9.5.The better thermodynamic compatibility between OA and Tween-80 occurred as the surface pressure was 10 mN/m,when the molar ratios of OA were 0.7 and 0.1 respectively in our experiments.

Experimental Study of Surface and Solution Properties of Gemini -conventional Surfactant Mixtures on Solubilization of Polycyclic Aromatic Hydrocarbon

Experimental data are presented on the enhanced solubilities of fluorene (FLR) resulting from solubilization in aqueous solutions of two conventional surfactants: cationic cetyltrimethylammonium bromide (CTAB) , anionic sodium dodecyl sulfate (SDS), nonioinic polyethylene glycol dodecyl ether (Brij35) and a cationic gemini bis (hexadecyldimethylammonium) pentane dibromide (G5). The critical micellar concentration of surfactants was determined by surface tension measurements and aqueous solubilities of fluorene compound in surfactant solutions were measured spectrophotometrically. Solubilization of PAH compound commenced at the surfactant critical micelle concentration and was proportional to the concentration of surfactant in micelle. The results of the mixed systems were analyzed with the help of regular solution theory, in which the deviation of CMCexp values for mixed surfactant systems from CMCideal was measured by evaluating the interaction parameter, βm. Negative values of βm were observed in all equimolar binary systems which show synergism in the mixed micelle. Attraction force between two oppositely charged head groups lead the strongest synergism effect between cationic gemini and anionic conventional surfactant. In addition to molar solubilization ratio (MSR) solubilization efficiency is also quantified in terms of micelle-water partition coefficient (Km).

Interaction of antipsychotic drug with novel surfactants: Micellization and binding studies

The interaction of cationic gemini surfactants(alkanediyl-α,ω-bis(alkyl dimethylammonium bromide)) with an antipsychotic drug(chlorpromazine hydrochloride(CPZ)) has been investigated. Various micellar and interfacial parameters have been deliberated by surface tension measurement to report the nature of interactions between drug and novel surfactant mixtures. The behavior of mixed systems, their compositions and activities of components have been analyzed in the light of Rubingh's theory. The results indicate synergism in the binary mixtures.The binding study between CPZ and surfactants has been done by spectroscopic techniques such as UV–visible and fluorescence. The results are discussed in the light of the use of gemini surfactants as promising drug delivery agents for phenothiazine drugs, and hence, improve their bioavailability.

Synthesis of crystal-phase and color tunable mixed anion co-doped titanium oxides and their controllable photocatalytic activity

B and N mixed anions co-doped titania with various crystal phases such as anatase,brookite,and rutile were successfully synthesized by a hydrothermal synthesis followed by heat treatment in an ammonia gas atmosphere at 550-650℃(denoted as BN-Ana_x,BN-Bro_x,and BN-Rut_x,x is the treatment temperature).The colors of as-prepared BN-Ana,BN-Bro,and BN-Rut are red,yellow-green,and cyangreen,respectively.The color changing mechanism of titania was related to their various band gap structure and the existence of B-N bonding.The nitridation temperature exhibits effective color changing compared to that of nitridation time.The different phases of the mixed anion codoped titania possess different photocatalytic deNO_(x) activity.The BN-Ana and BN-Rut show poor photocatalytic deNO_(x) activity,while the BN-Bro shows excellent photocatalytic deNO_(x) activity,better than that of standard titania photocatalyst Degussa P25.The colorful titania with low-photocatalytic activity is heavy metal elements free,indicating their possible applications as nontoxic color pigments or novel cosmetic raw materials.

Injection of biosurfactant and chemical surfactant following hot water injection to enhance heavy oil recovery

This study investigates the potential of enhancing oil recovery from a Middle East heavy oil field via hot water injection followed by injection of a chemical surfactant and/or a biosurfactant produced by a Bacillus subtilis strain which was isolated from oil-contaminated soil.The results reveal that the biosurfactant and the chemical surfactant reduced the residual oil saturation after a hot water flood.Moreover,it was found that the performance of the biosurfactant increased by mixing it with the chemical surfactant.It is expected that the structure of the biosurfactant used in this study was changed when mixed with the chemical surfactant as a probable synergetic effect of biosurfactant-chemical surfactants was observed on enhancing oil recovery,when used as a mixture,rather than alone.This work proved that it is more feasible to inject the biosurfactant as a blend with the chemical surfactant,at the tertiary recovery stage.This might be attributed to the fact that in the secondary mode,improvement of the macroscopic sweep efficiency is important,whereas in the tertiary recovery mode,the microscopic sweep efficiency matters mainly and it is improved by the biosurfactantchemical surfactant mixture.Also as evidenced by this study,the biosurfactant worked better than the chemical surfactant in reducing the residual heavy oil saturation after a hot water flood.

Testing a mobile app for child abuse treatment: A mixed methods study

Objective:This study provides a preliminary evaluation of the usability and acceptability of a mobile application(sexual assault care algorithm,SACA).Methods:An explanatory sequential mixed methods research was used.A quantitative survey was followed up by a qualitative study.A convenience sample of participants(n=4)was recruited.The research was conducted on a one-on-one basis.In the quantitative phase,a random assignment technique was used to divide four participants into two groups of two participants each.Post-Study System Usability Questionnaire(PSSUQ)and Acceptability e-Scale were used to collect quantitative data.In the qualitative phase,interview,observation,and documentation were used to collect qualitative data.Data were analyzed both quantitative and qualitatively.The qualitative data were linked with the initial quantitative data to determine how the follow-up qualitative data helped explain the initial quantitative results.Results:The quantitative results suggested that SACA has high usability(5.05±1.83)and acceptability(3.81±1.22).The qualitative results further indicate that the participants thought SACA was easy to use and useful,and most of them would recommend it to others.Areas of improvement include adding features that would calculate and validate the elapsed time since the sexual assault,adding explanations to some buttons,and providing training.Conclusions:Our findings highlight the value of using a mixed methods research design to conduct a usability and acceptability test.Nurses are more likely to adopt a new technology for their evidencebased practice when the technology is easy to use and useful and requires less time to find the right piece of guideline evidence.Individualized training needs to be designed based on users'characteristics.