A recent technique, using to potentially replace the conventional impregnating one in low voltage electric motors, has been studied in this communication. The conventional technique that uses?both primary and secondar...A recent technique, using to potentially replace the conventional impregnating one in low voltage electric motors, has been studied in this communication. The conventional technique that uses?both primary and secondary insulations;?i.e.: enamel and varnish, has been compared to this recent technique which only uses one component,?i.e.: self-bonding wires. Self-bonding wires polymerization is very quick compared to that of the conventional technique. Environmental impact and both dielectric and mechanical properties of these two techniques have been estimated and compared. The goal is to estimate if this recent technique has not only a better environmental footprint but also good technical properties. The dielectric properties that have been measured are the dielectric strength and?the lifetime under pulse?voltage while mechanical consists in measuring the bonding strength that is crucial for impregnation.?For that purpose, a Life Cycle Assessment (LCA) that can simultaneously evaluatenumerous impacts on ground, water and air,?has been performed. The results show clearly that the recent technique significantly reduces the environmental footprint. Both mechanical and dielectric properties are then compared and analyzed.展开更多
Internet of Things (IoT) is ubiquitous, including objects or devices communicating through heterogenous wireless networks. One of the major challenges in mobile IoT is an efficient vertical handover decision (VHD) tec...Internet of Things (IoT) is ubiquitous, including objects or devices communicating through heterogenous wireless networks. One of the major challenges in mobile IoT is an efficient vertical handover decision (VHD) technique between heterogenous networks for seamless connectivity with constrained resources. The conventional VHD approach is mainly based on received signal strength (RSS). The approach is inefficient for vertical handover, since it always selects the target network with the strongest signal without taking into consideration of factors such as quality of service (QoS), cost, delay, etc. In this paper, we present a hybrid approach by integrating the multi-cri- teria based VHD (MCVHD) technique and an algorithm based on fuzzy logic for efficient VHD among Wi-Fi, Radio and Satellite networks. The MCVHD provides a lightweight solution that aims to achieving seamless connectivity for mobile IoT Edge Gateway over a set of heterogeneous networks. The proposed solution is evaluated in real time using a testbed containing real IoT devices. Further, the testbed is integrated with lightweight and efficient software techniques, e.g., microservices, containers, broker, and Edge/Cloud techniques. The experimental results show that the proposed approach is suitable for an IoT environment and it outperforms the conventional RSS Quality based VHD by minimizing handover failures, unnecessary handovers, handover time and cost of service.展开更多
针对现有模型仅考虑一种内部状态对锂电池性能退化影响的问题,同步建立3个模型分别预测3种时变状态随锂电池性能退化的变化轨迹,并以内阻与温度预测为基础实现锂电池容量的实时更新;针对传统神经网络中的sigmoid与ReLU激活函数存在梯度...针对现有模型仅考虑一种内部状态对锂电池性能退化影响的问题,同步建立3个模型分别预测3种时变状态随锂电池性能退化的变化轨迹,并以内阻与温度预测为基础实现锂电池容量的实时更新;针对传统神经网络中的sigmoid与ReLU激活函数存在梯度消失与神经元坏死问题,在双向长短时记忆(bi-directional long short term memory,Bi-LSTM)网络与全连接网络中引入一种新的Mish激活函数,使模型以平稳的梯度流提取更高质量的特征用于剩余使用寿命(RUL)预测的建模分析。最后利用蒙特卡洛(Monte Carlo,MC)与Dropout技术对锂电池RUL的预测结果不确定性进行分析。在美国Kristen教授课题组所公开的锂电池数据集上进行对比试验的结果表明,所提改进Bi-LSTM模型预测的均方误差(mean squared error,MSE)、平均绝对误差(mean absolute error,MAE)与R^(2)可达9.16×10^(-5)、0.00795、99.794%。随着获取数据量的增加,模型对锂电池RUL预测的精度越高,RUL平均预测误差可达2.3个循环,验证了所提模型能有效地实现锂电池循环RUL的实时更新。展开更多
文摘A recent technique, using to potentially replace the conventional impregnating one in low voltage electric motors, has been studied in this communication. The conventional technique that uses?both primary and secondary insulations;?i.e.: enamel and varnish, has been compared to this recent technique which only uses one component,?i.e.: self-bonding wires. Self-bonding wires polymerization is very quick compared to that of the conventional technique. Environmental impact and both dielectric and mechanical properties of these two techniques have been estimated and compared. The goal is to estimate if this recent technique has not only a better environmental footprint but also good technical properties. The dielectric properties that have been measured are the dielectric strength and?the lifetime under pulse?voltage while mechanical consists in measuring the bonding strength that is crucial for impregnation.?For that purpose, a Life Cycle Assessment (LCA) that can simultaneously evaluatenumerous impacts on ground, water and air,?has been performed. The results show clearly that the recent technique significantly reduces the environmental footprint. Both mechanical and dielectric properties are then compared and analyzed.
文摘Internet of Things (IoT) is ubiquitous, including objects or devices communicating through heterogenous wireless networks. One of the major challenges in mobile IoT is an efficient vertical handover decision (VHD) technique between heterogenous networks for seamless connectivity with constrained resources. The conventional VHD approach is mainly based on received signal strength (RSS). The approach is inefficient for vertical handover, since it always selects the target network with the strongest signal without taking into consideration of factors such as quality of service (QoS), cost, delay, etc. In this paper, we present a hybrid approach by integrating the multi-cri- teria based VHD (MCVHD) technique and an algorithm based on fuzzy logic for efficient VHD among Wi-Fi, Radio and Satellite networks. The MCVHD provides a lightweight solution that aims to achieving seamless connectivity for mobile IoT Edge Gateway over a set of heterogeneous networks. The proposed solution is evaluated in real time using a testbed containing real IoT devices. Further, the testbed is integrated with lightweight and efficient software techniques, e.g., microservices, containers, broker, and Edge/Cloud techniques. The experimental results show that the proposed approach is suitable for an IoT environment and it outperforms the conventional RSS Quality based VHD by minimizing handover failures, unnecessary handovers, handover time and cost of service.
文摘针对现有模型仅考虑一种内部状态对锂电池性能退化影响的问题,同步建立3个模型分别预测3种时变状态随锂电池性能退化的变化轨迹,并以内阻与温度预测为基础实现锂电池容量的实时更新;针对传统神经网络中的sigmoid与ReLU激活函数存在梯度消失与神经元坏死问题,在双向长短时记忆(bi-directional long short term memory,Bi-LSTM)网络与全连接网络中引入一种新的Mish激活函数,使模型以平稳的梯度流提取更高质量的特征用于剩余使用寿命(RUL)预测的建模分析。最后利用蒙特卡洛(Monte Carlo,MC)与Dropout技术对锂电池RUL的预测结果不确定性进行分析。在美国Kristen教授课题组所公开的锂电池数据集上进行对比试验的结果表明,所提改进Bi-LSTM模型预测的均方误差(mean squared error,MSE)、平均绝对误差(mean absolute error,MAE)与R^(2)可达9.16×10^(-5)、0.00795、99.794%。随着获取数据量的增加,模型对锂电池RUL预测的精度越高,RUL平均预测误差可达2.3个循环,验证了所提模型能有效地实现锂电池循环RUL的实时更新。
