The emulsion polymerization of N-phenylmaleimide, Styrene and acrylonitrile was studied. The thermal property of this copolymer was measures by dynamic thermomechanical analysis(DMA). The mechanical properties, such a...The emulsion polymerization of N-phenylmaleimide, Styrene and acrylonitrile was studied. The thermal property of this copolymer was measures by dynamic thermomechanical analysis(DMA). The mechanical properties, such as tensile strength, hardness and fie-cural Strength were StUdied experimentally. The results indicated that not only the monomer component but also the polymerization technologies have effect on the properties of the copolymer. The optimum monomer content and suitable polymerization method were obtained.展开更多
The emulsion copolymerization of vinylidene chloride (VDC) with methyl-methacrylate(MMA) and acrylonitrile (AN) was carried out by batch, seeded batch and semicontinuous pro-cesses,respectively. Significant difference...The emulsion copolymerization of vinylidene chloride (VDC) with methyl-methacrylate(MMA) and acrylonitrile (AN) was carried out by batch, seeded batch and semicontinuous pro-cesses,respectively. Significant differences were found in the physical and mechanical propertiesof the latexes and films, depending on the methods of monomer feeding. The results both intheory and experiments demonstrated that the copolymer composition and the length of the VDC sequences in the copolymer could be controlled by the modes of monomer feeding process.展开更多
Critical association concentration (Ca) of ethylene-vinyl acetate copolymer (EVA) in selective solvent mixtures of 1,2-dichloroethane (DCE) (polar solvent) and cyclohexane (CYH) (non-polar solvent) was investigated. D...Critical association concentration (Ca) of ethylene-vinyl acetate copolymer (EVA) in selective solvent mixtures of 1,2-dichloroethane (DCE) (polar solvent) and cyclohexane (CYH) (non-polar solvent) was investigated. DCE is a good solvent for polyvinyl acetate (PVAc) and a poor solvent for paraffin, whereas CYH is a good solvent for the paraffin and a precipitant for PVAc. Viscosities of EVA in different compositions of the solvent mixture with and without additives were measured. Viscosity results were used to determine the C-A value of the systems. It is shown that C-A was markedly dependent on the composition of the solvent mixture and concentration and structure of the additive. Solvation and competition between hydrogen bonding and micellisation were suggested for qualitative description of the changing of C-A value observed.展开更多
The hydrophilic, macroporous and beaded ternary copolymer of glycidyl methacrylate （GMA）/methacrylamide（MA）/N,N＇-methylene-bis（acrylamide）（MBAA）was synthesized using the industrial agents by inverse suspensio...The hydrophilic, macroporous and beaded ternary copolymer of glycidyl methacrylate （GMA）/methacrylamide（MA）/N,N＇-methylene-bis（acrylamide）（MBAA）was synthesized using the industrial agents by inverse suspension polymerization. The apparent activity of the immobilized penicillin G acylase reached 1096 IU/g for hydrolysis penicillin G on the beads with diameter of 0.11-0.13 ram, and it changed hardly after 50 cycles. It can be expected to be a good potential in industrial application,展开更多
This paper mainly deals with the design and synthesis of a novel styrene-butadieneblock copolymer. When this copolymer is used in the tread portion of tyres, it can improvewet skid resistance and reduce rolling resist...This paper mainly deals with the design and synthesis of a novel styrene-butadieneblock copolymer. When this copolymer is used in the tread portion of tyres, it can improvewet skid resistance and reduce rolling resistance without sacrificing its general physical-mechanical properties. The visco-elastic curve of tire tread using the novel copolymer asits rubber portion was showed. Reactivity ratios for two monomers in the polymerizingsystem were calculated. The diagrams of differelitial, integral and finite difference calculithroughout the whole molecular chain were presented. The influence of the micro- andmacro-structure of the copolymer chain on wet skid resistance and rolling resistance wasdiscussed展开更多
In order to prepare a polymer solution for making carbon fibre precusor by wetspinning,solution polymerization of acrylonitrile ( A N) with itaconic acid ( I A) was carriedoutin D M S Ousing azobisisobutyronitrile ( A...In order to prepare a polymer solution for making carbon fibre precusor by wetspinning,solution polymerization of acrylonitrile ( A N) with itaconic acid ( I A) was carriedoutin D M S Ousing azobisisobutyronitrile ( A I B N) asinitiator. The effects of( A N+ I A) and A I B N concentration , A Nto I Aratio,temperature on conversion rate and molecular weightwere investigated . The polymerization ratein D M S O was 2 .6 time as fast at thatin D M F. The copolymers were characterized by I Rand N M Ranalysis.展开更多
文摘The emulsion polymerization of N-phenylmaleimide, Styrene and acrylonitrile was studied. The thermal property of this copolymer was measures by dynamic thermomechanical analysis(DMA). The mechanical properties, such as tensile strength, hardness and fie-cural Strength were StUdied experimentally. The results indicated that not only the monomer component but also the polymerization technologies have effect on the properties of the copolymer. The optimum monomer content and suitable polymerization method were obtained.
基金The project is supported by Beijing Natural Science Fund.
文摘The emulsion copolymerization of vinylidene chloride (VDC) with methyl-methacrylate(MMA) and acrylonitrile (AN) was carried out by batch, seeded batch and semicontinuous pro-cesses,respectively. Significant differences were found in the physical and mechanical propertiesof the latexes and films, depending on the methods of monomer feeding. The results both intheory and experiments demonstrated that the copolymer composition and the length of the VDC sequences in the copolymer could be controlled by the modes of monomer feeding process.
基金The project was supported by National Natural Science Foundation of China(No.29774020).
文摘Critical association concentration (Ca) of ethylene-vinyl acetate copolymer (EVA) in selective solvent mixtures of 1,2-dichloroethane (DCE) (polar solvent) and cyclohexane (CYH) (non-polar solvent) was investigated. DCE is a good solvent for polyvinyl acetate (PVAc) and a poor solvent for paraffin, whereas CYH is a good solvent for the paraffin and a precipitant for PVAc. Viscosities of EVA in different compositions of the solvent mixture with and without additives were measured. Viscosity results were used to determine the C-A value of the systems. It is shown that C-A was markedly dependent on the composition of the solvent mixture and concentration and structure of the additive. Solvation and competition between hydrogen bonding and micellisation were suggested for qualitative description of the changing of C-A value observed.
基金supported by the National Natural Science Foundation of China(No.20564002)the State Key Program of Fundamental Research(No.2004CCA05900).
文摘The hydrophilic, macroporous and beaded ternary copolymer of glycidyl methacrylate （GMA）/methacrylamide（MA）/N,N＇-methylene-bis（acrylamide）（MBAA）was synthesized using the industrial agents by inverse suspension polymerization. The apparent activity of the immobilized penicillin G acylase reached 1096 IU/g for hydrolysis penicillin G on the beads with diameter of 0.11-0.13 ram, and it changed hardly after 50 cycles. It can be expected to be a good potential in industrial application,
文摘This paper mainly deals with the design and synthesis of a novel styrene-butadieneblock copolymer. When this copolymer is used in the tread portion of tyres, it can improvewet skid resistance and reduce rolling resistance without sacrificing its general physical-mechanical properties. The visco-elastic curve of tire tread using the novel copolymer asits rubber portion was showed. Reactivity ratios for two monomers in the polymerizingsystem were calculated. The diagrams of differelitial, integral and finite difference calculithroughout the whole molecular chain were presented. The influence of the micro- andmacro-structure of the copolymer chain on wet skid resistance and rolling resistance wasdiscussed
文摘In order to prepare a polymer solution for making carbon fibre precusor by wetspinning,solution polymerization of acrylonitrile ( A N) with itaconic acid ( I A) was carriedoutin D M S Ousing azobisisobutyronitrile ( A I B N) asinitiator. The effects of( A N+ I A) and A I B N concentration , A Nto I Aratio,temperature on conversion rate and molecular weightwere investigated . The polymerization ratein D M S O was 2 .6 time as fast at thatin D M F. The copolymers were characterized by I Rand N M Ranalysis.
