期刊文献+
共找到237篇文章
< 1 2 12 >
每页显示 20 50 100
Fragility of disconnect switch subjected to random earthquake ground motions 被引量:1
1
作者 吕宝龙 陈玲俐 叶志明 《Journal of Shanghai University(English Edition)》 CAS 2011年第3期180-184,共5页
A fragility calculation scheme is estabtished in this paper for porcelain-type equipments subjected to random earthquake ground motions. All steps of the method are illustrated by the seismic damage analysis of GW4-11... A fragility calculation scheme is estabtished in this paper for porcelain-type equipments subjected to random earthquake ground motions. All steps of the method are illustrated by the seismic damage analysis of GW4-110 disconnect switch. The model of the equipment is built applying the finite element method with flexible joints, and the seismic response of the equipment is analyzed using elastic time history method. On the base, according to the strength damage index and Monte-Carlo Method, the seismic damage ratios are counted and the seismic fragility curves are presented. Then the seismic damage of GW4-110 disconnect switch can be predicted. 展开更多
关键词 disconnect switch FRAGILITY random earthquake ground motion strength damage index
下载PDF
All-optical switching and nonlinear optical properties of HBT in ethanol solution 被引量:3
2
作者 郑加金 张桂兰 +2 位作者 郭阳雪 李向平 陈文驹 《Chinese Physics B》 SCIE EI CAS CSCD 2007年第4期1047-1051,共5页
This paper demonstrates an all-optical switching model system comprising a single pulsed pump beam at 355 nm and a CW He-Ne signal beam at 632.8 nm with 2-(2'-hydroxyphenyl)benzothiazole (HBT) in ethanol solution... This paper demonstrates an all-optical switching model system comprising a single pulsed pump beam at 355 nm and a CW He-Ne signal beam at 632.8 nm with 2-(2'-hydroxyphenyl)benzothiazole (HBT) in ethanol solution. The origins of the optical switching effect were discussed. By the study of nonlinear optical properties for HBT in ethanol solvent, this paper verified that the excited-state intramolecular proton transfer (ESIPT) effect of HBT and the thermal effect of solvent worked on quite different time scales and together induced the change of the refractive index of HBT solution, leading to the signal beam deflection. The results indicated that the HBT molecule could be an excellent candidate for high-speed and high-sensitive optical switching devices. 展开更多
关键词 all-optical switching 2-(2'-hydroxyphenyl benzothiazole ESIPT nonlinear optical properties
下载PDF
Highly reliable bipolar resistive switching in sol-gel derived lanthanum-doped PbTiO_3 thin film: Coupling with ferroelectricity?
3
作者 Ying Wang Wei-Jin Chen +3 位作者 Xiao-Yue Zhang Wen-Jing Ma Biao Wang Yue Zheng 《Acta Mechanica Sinica》 SCIE EI CAS CSCD 2014年第4期526-532,共7页
Nanoscale PbxLa1-,Ti1-x/4O3 (PLT) thin film has been fabricated on Pt/Ti/SiO2/Si substrates by chemical solution deposition (CSD) method. Ferroelectricity of the fresh-made PLT thin film has been clearly detect... Nanoscale PbxLa1-,Ti1-x/4O3 (PLT) thin film has been fabricated on Pt/Ti/SiO2/Si substrates by chemical solution deposition (CSD) method. Ferroelectricity of the fresh-made PLT thin film has been clearly detected through piezoelectric force microscopy (PFM) by writing reversible ferroelectric domains. However, PLT thin film also shows off-standard ferroelectric hysteresis loops highly dependent on frequency, indicating large amount of mobile space charges in the film. Subsequent current-voltage (C-V) studies show that sandwich-like Pt/PLT/Pt structure exhibits notable bipolar resistive switching (BRS) characteristics with high stability (〉 103 switching cycles). It is found that the C-V curves of both high- and low-resistance states have the feature of space-charge-limited current (SCLC) conduction, indicating important roles of defects in the conduction. X-ray photoelectron spectroscopy measurement further verifies that oxygen vacancies based conductive filament mechanism is likely responsible for the observed RS effect. Our demonstration of stable RS effect in the PLT thin film and its possible coupling with ferroelectricity is promising in device development and applications, such as development of ferroelectric-tunable RS memories. 展开更多
关键词 FERROELECTRICITY Resistive switching - Stability -Oxygen vacancy
下载PDF
Improvement on Switching Characteristics and Switching Losses of IGBT by ZVS-PWM
4
作者 ZHANG Chunjiang, GU Herong, WU Weiyang(Yanshan University, Qinhuangdao 066004, CHN ) 《Semiconductor Photonics and Technology》 CAS 1997年第1期50-53,58,共5页
Absrtact: The principle of ZVS - PWM inverting circuit is first described by means of inverting welder supply. The contrastive study is made on switching characte -ristics and switching losses of IGBT between ZVS - PW... Absrtact: The principle of ZVS - PWM inverting circuit is first described by means of inverting welder supply. The contrastive study is made on switching characte -ristics and switching losses of IGBT between ZVS - PWM and hard - switching. 展开更多
关键词 IGBT switching Characteristics ZVS - PWM
下载PDF
Output Feedback Controller Design for Discrete-time Switched Singular Systems
5
作者 Mao Wang Yan-Ling Wei Jia Shi 《Journal of Harbin Institute of Technology(New Series)》 EI CAS 2013年第6期53-58,共6页
This paper is concerned with the problems of robust admissibility and static output feedback( SOF)stabilization for a class of discrete-time switched singular systems with norm-bounded parametric uncertainties.The obj... This paper is concerned with the problems of robust admissibility and static output feedback( SOF)stabilization for a class of discrete-time switched singular systems with norm-bounded parametric uncertainties.The objective is to design a suitable robust SOF controller guaranteeing the regularity,causality and asymptotic stability of the resulting closed-loop system under arbitrary switching laws. Based on the basic matrix inequality sufficient condition for checking the admissibility of switched singular systems,together with some matrix inequality convexifying techniques,the SOF controller synthesis is developed for the underlying systems. It is shown that the controller gains can be obtained by solving a set of strict linear matrix inequalities( LMIs). A simulation example is given to show the effectiveness of the proposed method. 展开更多
关键词 switched singular systems parameter uncertainties arbitrary switching robust static output feedback controlCLC number:TP273 Document code:AArticle ID:1005-9113(2013)06-0053-06
下载PDF
Room Temperature Phosphorescence pH Switch Based on Photo-induced Electron Transfer
6
作者 LiXuanMU YuWANG ZhaoZHANG WeiJunJIN 《Chinese Chemical Letters》 SCIE CAS CSCD 2004年第9期1131-1134,共4页
In this paper, photoinduced electron transfer(PET) phosphoroionophore, N-(1-bromo- 2-naphthylmethyl)-diethanolamine (BND) was synthesized and its phosphorescent characteristics were studied. The experimental results ... In this paper, photoinduced electron transfer(PET) phosphoroionophore, N-(1-bromo- 2-naphthylmethyl)-diethanolamine (BND) was synthesized and its phosphorescent characteristics were studied. The experimental results showed that strong phosphorescence could be observed in b-cyclodextrin aqueous solution only at low pH value. This system combined AND and NOT function to produce a three-input inhibit (INH) logic gate. 展开更多
关键词 Room temperature phosphorescence pH switch photoinduced electron transfer N-(1- bromo-2-naphthylmethyl)diethanolamine b-cyclodextrin logic gate.
下载PDF
GW7-252型隔离开关故障分析与改造 被引量:3
7
作者 金佳敏 潘益伟 《浙江电力》 2014年第2期63-65,共3页
针对GW7-252型隔离开关频繁发生合闸不到位的缺陷,通过设备解体查找原因,发现了静触头结构不合理、零部件材质不良、传动连杆强度不足等问题,并对其导电、传动部分实施了一系列的完善化改造。改造后的实际运行情况表明,设备运行操作稳定... 针对GW7-252型隔离开关频繁发生合闸不到位的缺陷,通过设备解体查找原因,发现了静触头结构不合理、零部件材质不良、传动连杆强度不足等问题,并对其导电、传动部分实施了一系列的完善化改造。改造后的实际运行情况表明,设备运行操作稳定,彻底消除了设备故障隐患。 展开更多
关键词 GW7 隔离开关 故障分析 完善化改造
下载PDF
基于热-电耦合有限元法的隔离开关热稳定性分析 被引量:8
8
作者 尹春贺 谢勇 +2 位作者 由佳欣 梁慧敏 翟国富 《机电元件》 2013年第2期47-51,共5页
运行状态中的隔离开关由于电阻损耗发热而温度升高,极端情况下会超过允许温升,影响电力系统的工作稳定性。为了分析其工作可靠性,使用三维有限元方法建立某型号隔离开关的有限元模型,对隔离开关进行热-电耦合仿真分析,得到稳态及瞬态的... 运行状态中的隔离开关由于电阻损耗发热而温度升高,极端情况下会超过允许温升,影响电力系统的工作稳定性。为了分析其工作可靠性,使用三维有限元方法建立某型号隔离开关的有限元模型,对隔离开关进行热-电耦合仿真分析,得到稳态及瞬态的温度分布云图与最高温升数值,现场试验结果验证了仿真分析的准确性。该方法可为产品设计提供参考,并为隔离开关可靠运行提供理论计算依据。 展开更多
关键词 隔离开关 热稳定性 -电耦合 有限元方法
下载PDF
GW5-110kV隔离开关常见故障及其改造 被引量:2
9
作者 齐保新 刘青杰 李学锋 《河北电力技术》 2004年第6期27-27,30,共2页
针对GW5110kV隔离开关的结构特点,从检修和维护方面对户外高压隔离开关的常见故障进行了分析并提出了改进建议。
关键词 隔离开关 故障 改进
下载PDF
GW4-110型隔离开关检修安全带挂架的研制 被引量:4
10
作者 周贵发 邓昭辉 +1 位作者 赵健 黄贵云 《贵州电力技术》 2014年第8期17-18,共2页
针对在变电站隔离开关上工作如何采取有效的防高空坠落安全措施,贵州电网公司研制出GW4-110型隔离开关检修安全带挂架,介绍了该安全带挂架的研制背景、目标、技术方案及应用情况。
关键词 GW4—110隔离开关 检修挂架 变电站
下载PDF
GW16(17)-252型高压隔离开关完善化改造情况与分析 被引量:4
11
作者 董修峰 刘荣才 《电力技术》 2010年第5期51-53,共3页
隔离开关完善化改造是消除设备隐患、提高运行可靠性、保证电网安全运行的一项重要措施。本文针对GW16(17)-252型隔离开关在运行中所出现的问题,分别提出了具体的完善化改造方案,并对方案加以归类、分析和总结,同时还介绍了该型号隔离... 隔离开关完善化改造是消除设备隐患、提高运行可靠性、保证电网安全运行的一项重要措施。本文针对GW16(17)-252型隔离开关在运行中所出现的问题,分别提出了具体的完善化改造方案,并对方案加以归类、分析和总结,同时还介绍了该型号隔离开关的组成结构和工作过程原理。 展开更多
关键词 隔离开关 完善化改造 分析
下载PDF
GW7-252型高压隔离开关存在的问题及改进 被引量:3
12
作者 耿秉军 张永胜 《内蒙古电力技术》 2017年第5期71-74,共4页
针对GW7-252型三柱水平旋转式双断口高压交流隔离开关在合闸操作时经常出现分合闸不到位、操作机构水平连杆断裂、合闸运行中触头发热等故障,内蒙古大唐国际再生资源开发有限公司对220 kV唐铝变电站8组GW7-252型高压隔离开关主导电部分... 针对GW7-252型三柱水平旋转式双断口高压交流隔离开关在合闸操作时经常出现分合闸不到位、操作机构水平连杆断裂、合闸运行中触头发热等故障,内蒙古大唐国际再生资源开发有限公司对220 kV唐铝变电站8组GW7-252型高压隔离开关主导电部分及传动机构进行了升级改进。改进后,GW7-252型高压隔离开关的各项技术性能测试结果全部合格,消除了原设备存在的缺陷,提高了设备稳定性和运行可靠性。该改进方法可供其他变电站借鉴。 展开更多
关键词 高压隔离开关 导电回路 传动机构 动触头 静触头 分合闸操作
下载PDF
C4-PFN-CO_(2)混合气体在145 kV隔离开关结构下的灭弧性能研究 被引量:4
13
作者 王炜 罗颜 +3 位作者 黄青丹 卓然 宋浩永 王邸博 《电器与能效管理技术》 2021年第12期7-12,共6页
为了验证C4-PFN气体在145 kV隔离开关中的灭弧能力以及应用前景,选取了C4-PFN-CO_(2)混合气体作为介质进行开断实验。先对C4-PFN气体的饱和蒸气压特性进行了研究,得到了在-25℃液化温度限制下C4-PFN-CO_(2)混合气体的最佳混合比例。在-2... 为了验证C4-PFN气体在145 kV隔离开关中的灭弧能力以及应用前景,选取了C4-PFN-CO_(2)混合气体作为介质进行开断实验。先对C4-PFN气体的饱和蒸气压特性进行了研究,得到了在-25℃液化温度限制下C4-PFN-CO_(2)混合气体的最佳混合比例。在-25℃温度下C4-PFN-CO_(2)混合气体中C4-PFN的最大比例为5.8%。实验发现,在0.6 MPa情况下,C4-PFN-CO_(2)混合气体的弧压相对SF_(6)低,且电弧能量注入量也小,说明SF_(6)的能量耗散速率更高,且灭弧能力更优良。提高压力至0.7 MPa时C4-PFN-CO_(2)混合气体的弧压与0.6 MPa下的SF_(6)很接近,且起弧时也出现电压尖峰,说明气压升高明显提升了混合气体的能量耗散速率,提高了灭弧性能。从燃弧时间分散性上看,气压提升也降低了分散性,对于提高开断过程的电弧稳定性有重要意义。 展开更多
关键词 SF_(6)替代气体 C4-PFN-CO_(2)混合气体 隔离开关 灭弧性能
下载PDF
Stabilization of CSTR w ith Self-tuning Sliding Mode Controller Using T-S Fuzzy Linearization 被引量:2
14
作者 朱群雄 王军霞 《Journal of Donghua University(English Edition)》 EI CAS 2013年第4期287-292,共6页
A self-tuning reaching law based sliding mode control(SMC)theory is proposed to stabilize the nonlinear continuous stirred tank reactor(CSTR).T-S fuzzy logic is used to build a global fuzzy state-space linear model.Co... A self-tuning reaching law based sliding mode control(SMC)theory is proposed to stabilize the nonlinear continuous stirred tank reactor(CSTR).T-S fuzzy logic is used to build a global fuzzy state-space linear model.Combing the traits of SMC and CSTR,three fuzzy rules can meet the requirements of controlled system.The self-tuning switch control law which can drive the state variables to the sliding surface as soon as possible is designed to ensure the robustness of uncertain fuzzy system.Lyapunov equation is applied to proving the stability of the sliding surface.The simulations show that the proposed approach can achieve desired performance with less chattering problem. 展开更多
关键词 sliding mode control(SMC) continuous stirred tank reactor (STR) T-S fuzzy model self-tuning switch control lawCLC number:TP13Document code:AArticle ID:1672-5220(2013)04-0287-06
下载PDF
新型GN30-12型大电流隔离开关触头研制的研究
15
作者 梁勐 王伟 +3 位作者 林斓瀚 吴昆泰 陈勇超 梁锋涛 《科技创新与应用》 2018年第35期40-41,共2页
为了对现阶段隔离开关触头存在的技术问题进行有效解决,结合10kVGN30-12型大电流隔离开关触头进行创新研制,研发出一款新型高效的触头,在研制过程中,将该触头采用T2电解铜板作为导电回路主体,软连接作为静触片的连接结构,增加触片的导... 为了对现阶段隔离开关触头存在的技术问题进行有效解决,结合10kVGN30-12型大电流隔离开关触头进行创新研制,研发出一款新型高效的触头,在研制过程中,将该触头采用T2电解铜板作为导电回路主体,软连接作为静触片的连接结构,增加触片的导电截面,保证触片可动连接,采用铝合金底座,特制散热片,在动静触头连接处的静触片处增加3×4的散热孔,所有紧固件采用304不锈钢材质。研制出来的隔离开关触头能够有效对实际当中问题加以有效解决,具有非常广阔的应用前景。 展开更多
关键词 隔离开关 隔离开关触头 大电流GN30-12 研制矣
下载PDF
GW7D-1100(W)型隔离开关提前翻转故障改进措施
16
作者 蒋明杰 刘浩 +1 位作者 肖怀硕 董肇晖 《机械管理开发》 2023年第8期108-110,共3页
某变电站的一组三柱水平旋转式GW7D-1100(W)隔离开关出现合闸操作时主刀臂提前翻转,动触头未能进入主静触头,合闸不成功,在进行分闸操作后主刀臂亦无法旋转至原状态,影响了送电工作。基于此,为避免隔离开关合闸提前翻转动作故障提出了... 某变电站的一组三柱水平旋转式GW7D-1100(W)隔离开关出现合闸操作时主刀臂提前翻转,动触头未能进入主静触头,合闸不成功,在进行分闸操作后主刀臂亦无法旋转至原状态,影响了送电工作。基于此,为避免隔离开关合闸提前翻转动作故障提出了一种改进措施,改进后的刀闸无须再进行登高作业,在一定程度上也增加了人员操作的安全性。 展开更多
关键词 隔离开关 提前翻转 卡涩
下载PDF
Electrodeposited iodide ions imprinted polypyrrole@bismuth oxyiodide film for an electrochemically switched renewable extractor towards iodide ions
17
作者 Fengfeng Gao Jinhua Luo +5 位作者 Xuefeng Zhang Xiaogang Hao Guoqing Guan Zhong Liu Jun Li Qinglong Luo 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2022年第9期161-169,共9页
Effective extraction and regeneration of radioactive iodide is one of urgent concerns for the safe utilization of nuclear energy.As a novel environmentally benign ion separation technique,electrochemically switched io... Effective extraction and regeneration of radioactive iodide is one of urgent concerns for the safe utilization of nuclear energy.As a novel environmentally benign ion separation technique,electrochemically switched ion extraction(ESIE)process can be applied for effective capture and recovery of iodide ions(I^(-)).Herein,a novel kelp seaweed-like core/shell I^(-)imprinted polypyrrole@bismuth oxyiodide(PPy/I^(-)@BiOI)composite film is successfully prepared for the selective I^(-)capture in the ESIE system.It is found that the I^(-)can be easily trapped in the PPy/I^(-)@BiOI film after I^(-)is in situ desorbed from the film by an electrochemical reduction process since it offers particular electroactive binding sites for I^(-)extraction.The I^(-)imprinted PPy/I^(-)@BiOI film displays an extraction capacity as high as 325.2 mg·g^(-1)for I^(-)with favorable stability.In particular,the extraction and desorption of I^(-)is achieved by adjusting the redox potential and the pristine PPy/I^(-)@BiOI film can be regenerated and reused for multiple times without decrease in extraction capacity.It is expected that such a PPy/I^(-)@BiOI film would be useful as an electrochemically switched renewable extractor that could capture and regenerate I^(-)from radioactive water. 展开更多
关键词 Electrochemically switched ion extraction PPy/I^(-)@BiOI film Radioactive iodide ion Separation Selectivity Electrochemistry
下载PDF
小店变电站220kV小榆线267-1隔离开关触头过热的原因分析及采取的措施
18
作者 袁改莲 《科技情报开发与经济》 2010年第36期189-190,共2页
介绍了小店变电站220kV小榆线267-1隔离开关触头过热故障的基本情况,分析了严重过热的原因,并根据具体原因制定了有针对性的措施。
关键词 变电站 隔离开关 触头过热
下载PDF
一种基于磁耦合转移原理的10kV直流断路器
19
作者 侯彦杰 贺小瑞 +2 位作者 刘伟 孙玉晨 陶斐 《电气技术》 2024年第5期57-64,共8页
直流电流没有自然过零点,因此开断直流短路电流比开断交流短路电流更为困难。本文介绍一种基于磁耦合电流转移原理的中压10kV直流断路器拓扑方案,该断路器可实现对15kA直流电流的快速开断。首先,对直流断路器原理和控制逻辑进行介绍;然... 直流电流没有自然过零点,因此开断直流短路电流比开断交流短路电流更为困难。本文介绍一种基于磁耦合电流转移原理的中压10kV直流断路器拓扑方案,该断路器可实现对15kA直流电流的快速开断。首先,对直流断路器原理和控制逻辑进行介绍;然后,根据拓扑方案提出快速机械开关、电力电子开关、磁耦合装置等核心部件的设计思路;最后,搭建仿真模型对该方案进行仿真分析,模拟不同工况下的开断情况,仿真结果验证了该方案的有效性。 展开更多
关键词 直流断路器 直流开断 快速机械开关 电力电子开关 磁耦合装置
下载PDF
隔离开关温度检测用可逆变色涂料制备方法及其性能
20
作者 董冰冰 孟岩 +1 位作者 葛医博 武奔 《高电压技术》 EI CAS CSCD 北大核心 2024年第6期2580-2589,共10页
隔离开关触头异常发热问题较为突出,影响电网的安全稳定运行。为了及时检测异常发热,提出一种隔离开关温度检测用可逆变色涂料制备方法,并对其性能进行分析研究。采用三组分法以结晶紫内酯为发色剂、双酚A为显色剂、棕榈酸为溶剂制备可... 隔离开关触头异常发热问题较为突出,影响电网的安全稳定运行。为了及时检测异常发热,提出一种隔离开关温度检测用可逆变色涂料制备方法,并对其性能进行分析研究。采用三组分法以结晶紫内酯为发色剂、双酚A为显色剂、棕榈酸为溶剂制备可逆变色材料,并对其组分质量配比进行优选。结果表明:提高双酚A的质量配比,变色材料颜色加深,变色开始温度和变色结束温度均有所提高。提高棕榈酸的质量配比,变色材料颜色变浅,变色开始温度未见明显变化,而变色结束温度逐渐降低。采用原位聚合法制备变色微胶囊并进行差示扫描量热分析,其发生相变的温度区间与其变色温度范围较为一致,且其热稳定性良好。采用混合搅拌法制备不同配比(持久性就地成型防污闪复合涂料:微胶囊)的变色涂料具有较好的变色性能。各配比变色涂料的水接触角均大于100°,且单位长度沿面闪络电压均大于8.5 kV,具有较好的疏水性能和耐电性能。研究成果可为高温高湿运行环境中的隔离开关热致缺陷在线检测提供方法参考。 展开更多
关键词 隔离开关 温度检测 变色材料 微胶囊制备 变色性能 耐电性能
下载PDF
上一页 1 2 12 下一页 到第
使用帮助 返回顶部